200W Single Output with PFC Function SP-200 series

■ Features : User’s Manual

Universal AC input / full range
Built-in active PFC function, PF>0.93
Protections: Short circuit / Overload / Over voltage /
Over temperature
Built-in cooling fan speed control
Built-in constant current limiting circuit
Built-in fan speed control
Remote ON-OFF control(Optional)
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty
SPECIFICATION UL60950-1 GB4943.1
MODEL SP-200-3.3 SP-200-5 SP-200-7.5 SP-200-12 SP-200-13.5 SP-200-15 SP-200-24 SP-200-27 SP-200-48
DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V
RATED CURRENT 40A 40A 26.7A 16.7A 14.9A 13.4A 8.4A 7.5A 4.2A
CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 26.7A 0 ~ 16.7A 0 ~ 14.9A 0 ~ 13.4A 0 ~ 8.4A 0 ~ 7.5A 0 ~ 4.2A
RATED POWER 132W 200W 200.2W 200.4W 201.1W 201W 201.6W 202.5W 201.6W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
OUTPUT VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME 600ms, 40ms at full load
HOLD UP TIME (Typ.) 20ms at full load
VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.97/115VAC at full load
INPUT EFFICIENCY (Typ.) 69% 76% 78.5% 84% 84% 84% 85% 85% 85%
AC CURRENT (Typ.) 3.5A/115VAC 1.7A/230VAC
INRUSH CURRENT (Typ.) COLD START 50A/230VAC
LEAKAGE CURRENT <2mA / 240VAC
105 ~ 150% rated output power
OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF
WORKING TEMP. -10 ~ +60℃ (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.05%/℃ (0 ~ 50℃)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS UL60950-1, CCC GB4943 approved
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/70% RH
(Note 4) EMC EMISSION Compliance to EN55032 (CISPR32) Class B,EN61000-3-2,-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
MTBF 183.8K hrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 199*99*50mm (L*W*H)
PACKING 0.85Kg; 20pcs/17.9Kg/1.21CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on [Link]
※ Product Liability Disclaimer：For detailed information, please refer to [Link]

File Name:SP-200-SPEC 2021-09-15

 200W Single Output with PFC Function SP-200 series

Mechanical Specification Case No. 916B Unit:mm

199
20 35 133
25 117
70 65 48.5

CN1
R.C. 1
35.2
2
+V ADJ.
LED
7

51
6
9.5

119
5

79
99
2-M4 L=5mm
4
3 5-M3 L=3mm

49.5
38
2
8

10
16

15
Terminal Pin No. Assignment
Pin No. Assignment Pin No. Assignment
142 1 AC/L 4,5 DC OUTPUT -V
25 Air flow 2 AC/N 6,7 DC OUTPUT +V
direction
3 FG
11 max.
Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional)
25

Pin No. Assignment Mating Housing Terminal

50
25

1 RC+ JST XHP JST SXH-001T-P0.6

12.5

2 RC- or equivalent or equivalent

6-M4 L=6mm

PFC fosc : 67KHz

Block Diagram FAN FAN
PWM fosc : 134KHz
SPEED
CONTROL
EMI FILTER PFC POWER RECTIFIERS +V
I/P & &
RECTIFIERS CIRCUIT SWITCHING -V
FILTER
CONSTANT
CURRENT
LIMITING &
FG O.L.P. DETECTION
ACTIVE PWM & PFC CIRCUIT
START CONTROL
CIRCUIT O.V.P.

O.T.P. REMOTE CN1

CONTROL

Derating Curve Output Derating VS Input Voltage

100
100
90
80
80

60 70
LOAD (%)

LOAD (%)

60
40
50
20
40

-10 0 10 20 30 40 50 60 (HORIZONTAL) 85 100 115 135 155 230 264

AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz

File Name:SP-200-SPEC 2021-09-15