Construction Machine

HS 8100 HD EN

HS 8004.02
Dimensions
Basic machine with undercarriage

7600 3500
R
63 2900
75

3400
1950

1360

1220
1150 2680

350
5360 800
6450 1500 4950
0
70
R4

4950

11910

Operating weight Remarks

The operating weight includes the basic machine with HD under- 1. Liebherr cable excavator HS 8004.02
carriage, 2 main winches 275 kN including wire ropes (90 m), and 11 m
main boom, consisting of A–frame, boom foot (5.5 m) and boom head 2. Designed according to EN 474–1 and EN 474–12.
(5.5 m), 26.3 t basic counterweight, 800 mm 3-web grousers and 50 t
hook block. 3. Machine standing on firm, horizontal ground.
Total weight    approx. 89 t
4. The weight of the lifting device (hoist ropes, hook block, shackle
etc.) must be deducted from the gross lifting capacity to obtain a
Ground pressure net lifting value.
Ground bearing pressure    1.04 kg/cm2 5. Additional equipment on boom (e.g. boom catwalks, auxiliary jib)
must be deducted to get the net lifting capacity.
Equipment
6. For max. wind speed please refer to lift chart in operator‘s cab or
Main boom (No. 1311.24) max. length    59 m manual.
Modular designed equipment for lifting operation, with dragline or
clamshell. 7. Working radii are measured from centre of swing and under load.
For dragline operation, a rotating fairlead is fitted into the boom foot.
This minimizes the rope angle to drum, which results in lower rope wear. 8. The lifting capacities are valid for 360 degrees of swing.

2  HS 8100 HD – 8004.02
Transport dimensions and weights
Basic machine and boom (No. 1311.24)

Basic machine
3530 with HD undercarriage, boom foot (No. 1311.24), A-frame, 2x 275 kN
winches including wire ropes (90 m), without basic counterweight.
Width   3500 mm
Weight  with 800 mm 3-web grousers   59550 kg
800
11800 1800* Weight  with 900 mm 3-web grousers (optional)   59930 kg
Weight of hoist rope (2x 90 m)   5.68 kg/m

Basic machine
3180
with boom foot (No. 1311.24), A-frame, 2x 275 kN winches including
wire ropes (90 m), without basic counterweight and crawlers.
870 Width   3500 mm
Weight   40230 kg
11800 3040
Weight of hoist rope (2x 90 m)   5.68 kg/m

1220 Crawler 2x
3-web grousers  800 mm
6450 Width  915 mm
Weight  with 800 mm 3-web grousers 9650 kg
Weight  with 900 mm 3-web grousers (optional) 9840 kg
1385

3150 Boom section (No. 1311.24) 3m

Width   1430 mm
Weight incl. pendant ropes    525 kg
1385
Boom section (No. 1311.24) 6m
6150 Width   1430 mm
Weight incl. pendant ropes    880 kg

1745 Boom head* (No. 1311.24)

Width   1430 mm
Weight incl. pendant ropes    2120 kg
5775

*) Steel sheaves (2+3) Weights can vary with the final configuration of the machine. The figures
in this brochure may include options which are not within the standard
scope of supply of the machine.

HS 8100 HD – 8004.02 3
Transport dimensions and weights
Counterweights

Counterweight (option 10x) 6x

475 Width   850 mm
Weight   1500 kg
960

Counterweight 1x
1220 Width   1050 mm
Weight   17330 kg
3500
Carbody counterweight (option 2x)
840 Width   1640 mm
Weight   7500 kg
1960

Hooks

100 t hook block – 2 sheaves

1150 Width    320 mm
Weight    1200 kg
2100

50 t hook block – 1 sheave

900 Width    400 mm
Weight    900 kg
1910
40 t hook block – 1 sheave
Width    250 mm
940
Weight    515 kg
1750
25 t single hook
Width    400 mm
400
Weight    400 kg
980

20 t single hook
350 Width    350 mm

880 Weight    350 kg

4  HS 8100 HD – 8004.02
Technical description

   Engine     Main winches

Power rating according to ISO 9249, 390 kW (523 hp) at 1700 rpm Winch options:
Engine type    Liebherr D 946 A7–04 Line pull (nom. load)    200 kN    275 kN
Fuel tank    790 l capacity with continuous level Rope diameter    30 mm    34 mm
    indicator and reserve warning Drum diameter    630 mm    750 mm
AdBlue tank    96 l capacity with continuous level Rope speed    0-123 m/min    0-96 m/min
    indicator and reserve warning Rope capacity 1st layer    40.6 m    38.8 m
Engine complies with NRMM exhaust certification EPA CARB Tier 4f and The winches are outstanding in their compact design and easy assembly.
97/68 EC Stage IV. Clutch and braking functions on the free-fall system are provided by a
compact designed, low wear and maintenance-free multi–disc brake.
ECO-Silent-Mode: The drag and hoist winches use pressure controlled, variable flow
For work not requiring high engine power, the diesel engine can be hydraulic motors. This system features sensors that automatically adjust
operated in the ECO-Silent-Mode (e.g. for inserting reinforcement cages, oil flow to provide max. winch speed depending on load.
for dragline or lifting operation). Option:
Due to the ECO-Silent-Mode which can be preselected by the operator Auxiliary winch    70 kN in boom foot
the engine runs with optimum fuel efficiency. This lowers consumption Tagline winch    30 kN with free fall
and reduces noise emission.

   Control
The core of the Liebherr machines is the Litronic control system.
    Hydraulic system
Developed and manufactured by Liebherr, this comprehensive system
The pumps are operated by a distributor gearbox. Axial piston encompasses all control and monitoring functions and is designed to
displacement pumps work in closed and open circuits supplying oil only withstand extreme temperature changes and the rough heavy duty tasks
when needed (flow control on demand). To minimize peak pressure an common in the construction industry. Complete machine operating data,
automatically working pressure cut-off is integrated. This spares pumps warnings and failure indications are clearly displayed in the required
and saves energy. The hydraulic oil is cleaned through electronically language on the high resolution monitor in the operator’s cab.
controlled pressure and return filters. Possible contamination is signaled Documentation of operating data (PDE) enables optimum diagnosis as well
in the cabin. as early detection and prevention of more serious defects.
Ready made hydraulic retrofit kits are available to customize requirements An electro-hydraulic proportional control allows several movements to be
e.g. powering casing oscillators, VM vibrators, hydraulic grabs, fixed performed simultaneously. This ensures that all categories of loads can be
leaders etc. positioned with utmost precision.
Working pressure    max. 400 bar Options:
• PDE: Process data recording
Oil tank capacity    910 l
• LiTU: Liebherr Telematics Unit
• Piling control / chisel control

   Swing
   Crawlers
Consists of rollerbearing with external teeth for lower tooth flank pressure,
The track width of the undercarriage is changed hydraulically.
fixed axial piston hydraulic motor, spring loaded and hydraulically released
Propulsion through axial piston motor, hydraulically released spring
multi–disc holding brake, planetary gearbox and pinion.
loaded multi–disc brake, maintenance-free crawler tracks, hydraulic
Swing speed from 0–4.6 rpm continuously variable, selector for 3 speed
chain tensioning device.
ranges to increase swing precision.
3-web grousers    800 mm
Option:
Transport width    3400 mm
• Second swing drive
Drive speed    0 – 1.28 km/h

Option:
3-web grousers    900 mm
    Noise emission Transport width    3500 mm
• 2-speed hydraulic motor for higher travel speed
Noise emissions correspond with 2000/14/EC directive. • Self-assembly system, jack-up system
Guaranteed sound pressure level LPA in the cabin    74.4 dB(A)

Guaranteed sound power level LWA   107 dB(A)

    Boom winch
Vibration transmitted to the hand-arm system of the
machine operator   < 2.5 m/s2 Line pull    max. 105 kN
Vibration transmitted to the whole body of the Rope diameter    20 mm
machine operator   < 0.5 m/s2 Boom up    44 sec. from 15° to 86°

HS 8100 HD – 8004.02 5
Equipment
Casing oscillator and clamshell

Casing oscillator
Max. drilling diameter 
  2000 mm

Load chart for grab operation

counterweight 26.3 t 23.3 t 20.3 t (main boom No. 1311.24)

Capacities in meric tonnes for boom lengths (11 m - 32 m)

Boom length in (m)
Radius 11 14 17 20 23 26 29 32 Radius
(m) t t t t t t t t t t t t t t t t t t t t t t t t (m)
4.2 38.1 38.1 38.1 4.2
5 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 38.1 38.1 38.1 33.6 33.6 33.6 5
6 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.3 42.3 42.3 42.4 42.4 42.4 42.4 42.4 42.4 38.1 38.1 38.1 33.6 33.6 33.6 6
7 39.4 36.8 34.3 39.5 36.9 34.4 39.5 37.0 34.4 39.5 37.0 34.4 39.5 36.9 34.4 39.5 36.9 34.4 38.1 36.9 34.3 33.6 33.6 33.6 7
8 32.3 30.2 28.1 32.4 30.3 28.2 32.4 30.3 28.2 32.4 30.3 28.2 32.4 30.3 28.1 32.3 30.2 28.1 32.3 30.2 28.1 32.2 30.1 28.0 8
9 27.3 25.5 23.7 27.4 25.6 23.8 27.4 25.6 23.8 27.4 25.6 23.8 27.3 25.5 23.7 27.3 25.5 23.7 27.2 25.4 23.6 27.1 25.3 23.5 9
10 23.5 21.9 20.4 23.6 22.0 20.5 23.6 22.1 20.5 23.6 22.0 20.5 23.6 22.0 20.4 23.5 21.9 20.3 23.4 21.8 20.3 23.3 21.8 20.2 10
12 18.4 17.1 15.9 18.4 17.1 15.9 18.4 17.1 15.9 18.3 17.1 15.8 18.2 17.0 15.7 18.2 16.9 15.7 18.1 16.8 15.6 12
14 14.8 13.8 12.8 14.9 13.9 12.8 14.9 13.8 12.8 14.8 13.8 12.7 14.7 13.7 12.7 14.7 13.6 12.6 14.6 13.5 12.5 14
16 12.4 11.5 10.6 12.4 11.5 10.6 12.3 11.5 10.6 12.3 11.4 10.5 12.2 11.3 10.4 12.1 11.2 10.3 16
18 10.5 9.7 9.0 10.5 9.7 8.9 10.4 9.6 8.8 10.3 9.5 8.8 10.2 9.4 8.7 18
20 9.0 8.3 7.7 9.0 8.3 7.6 8.9 8.3 7.6 8.9 8.2 7.5 8.8 8.1 7.4 20
22 7.8 7.2 6.6 7.8 7.2 6.5 7.7 7.1 6.5 7.6 7.0 6.4 22
24 6.8 6.3 5.7 6.8 6.2 5.6 6.7 6.1 5.5 24
26 5.6 5.1 4.7 5.4 5.0 4.5 26
28 4.4 4.0 3.6 4.3 3.9 3.5 28
30 3.3 2.9 2.6 30
TLT 11914695 M00000 V1

Max. capacities in metric tonnes do not exceed 66.7% of tipping load. Capacities are for reference only and are not programmed in the LMI system.
Max. lifting capacity with mechanical grab is 27.5 t. For higher lifting capacities a hydraulic grab is required.

6  HS 8100 HD – 8004.02
Dynamic soil compaction

Load chart for dynamic soil compaction

26.3 t counterweight (main boom No. 1311.24)

Capacities in metric tonnes for boom lengths (20 m – 32 m)

Boom length in (m)
Radius 20 23 26 29 32
(m) t t t t t
8 24.5 24.5 24.0 23.7 22.4
9 20.7 20.7 20.7 20.5 19.7
10.0 17.9 17.8 17.7 17.2

Max. capacities in metric tonnes do not exceed 75% of tipping load.

All loads given are max. values and must not be exceeded. They are only permitted in two-rope automatic operation and are valid for work on a surface
with max. inclination of 1%. Lifting heights must not exceed 25 m.

HS 8100 HD – 8004.02 7
Equipment
Dragline equipment

E D

Digging diagram
C = Radius / dumping radius
D = Max. digging radius = approx.
C + 1/3 to 1/2 J
E = Digging depth = approx.
40 - 50% of C
J = Height to centre rope pulley
boom head

Load chart for dragline operation

26.3 t counterweight (main boom No. 1311.24)

Capacities in metric tonnes for boom lengths (14 m - 29 m)

Boom length in (m)
14 17 20 23 26 29
C J C J C J C J C J C J
alpha (m) (m) t (m) (m) t (m) (m) t (m) (m) t (m) (m) t (m) (m) t alpha
55 10.1 13.0 26.4 11.8 15.5 21.3 13.6 18.0 17.7 15.3 20.4 14.9 17.0 22.9 12.3 18.7 25.3 10.6 55
50 11.1 12.3 23.4 13.0 14.6 18.8 14.9 16.9 15.5 16.8 19.1 13.0 18.8 21.4 10.9 20.7 23.7 9.4 50
45 11.9 11.4 21.1 14.0 13.5 16.9 16.2 15.6 13.9 18.3 17.8 11.5 20.4 19.9 9.8 22.5 22.0 8.0 45
40 12.7 10.4 19.3 15.0 12.4 15.4 17.3 14.3 12.6 19.6 16.2 10.6 21.9 18.2 8.6 24.2 20.1 6.7 40
35 13.4 9.4 17.9 15.9 11.2 14.3 18.3 12.9 11.7 20.8 14.6 9.7 23.2 16.3 7.6 25.7 18.0 5.8 35
30 14.0 8.4 16.9 16.6 9.9 13.4 19.2 11.4 10.9 21.8 12.9 8.8 24.4 14.4 6.7 27.0 15.9 5.0 30
25 14.5 7.3 16.0 17.2 8.5 12.7 20.0 9.8 10.3 22.7 11.1 8.1 25.4 12.3 6.0 28.1 13.6 4.4 25
TLT 11916665 M00000 V1

Max. capacities in metric tonnes do not exceed 75% of tipping load. Capacities are for reference only and are not programmed in the LMI system.
The size of the bucket has to be determined according to local conditions.

8  HS 8100 HD – 8004.02
Slurry wall grab

Maximum capacity in duty cycle operation with standard ropes

Line pull (1st layer) kN 200 275
Rope diameter mm 30 34
Minimum breaking load kN 846 1046
Line pull - 1-rope duty cycle operation kN 200 275
Line pull - 2-rope duty cycle operation 1) kN 303 417

1) Lifting a load exceeding the line pull of one winch is only allowed
if it can be ensured that each individual winch is not overloaded.
When working with a mechanical 2-rope grab the total load
to be lifted is limited by the line pull of one winch.
Rigging and ropes are part of the load.
Max. capacities in metric tonnes do not exceed 75% of tipping load.

Capacities in slurry wall operation are for reference only and are not pro-
grammed in the LMI system.
All loads and counterweight configurations are max. values and must not
be exceeded.
Weight of additional equipment on boom (e.g. catwalks, hose drums
etc.) must be deducted to get the net capacity.

Load chart for slurry wall operation

counterweight 26.3 t 23.3 t 20.3 t (main boom No. 1311.24)

Capacities in metric tonnes for boom lengths (11 m - 32 m)

Boom length in (m)
Radius 11 14 17 20 23 26 29 32 Radius
(m) t t t t t t t t t t t t t t t t t t t t t t t t (m)
4.2 38.1 38.1 38.1 4.2
5 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 42.4 38.1 38.1 38.1 33.6 33.6 33.6 5
6 42.4 39.7 42.4 42.4 39.8 42.4 42.4 39.9 42.3 42.3 39.9 42.4 42.4 39.9 42.4 42.4 39.9 38.1 38.1 38.1 33.6 33.6 33.6 6
7 35.8 33.5 31.2 35.9 33.6 31.3 35.9 33.6 31.3 35.9 33.6 31.3 35.9 33.6 31.3 35.9 33.6 31.3 35.8 33.5 31.2 33.6 33.5 31.2 7
8 29.4 27.4 25.5 29.4 27.5 25.6 29.5 27.6 25.6 29.4 27.5 25.6 29.4 27.5 25.6 29.4 27.5 25.5 29.3 27.4 25.5 29.3 27.4 25.4 8
9 24.8 23.2 21.5 24.9 23.2 21.6 24.9 23.3 21.6 24.9 23.2 21.6 24.8 23.2 21.6 24.8 23.1 21.5 24.7 23.1 21.5 24.7 23.0 21.4 9
10 21.4 19.9 18.5 21.5 20.0 18.6 21.5 20.1 18.6 21.4 20.0 18.6 21.4 20.0 18.6 21.3 19.9 18.5 21.3 19.9 18.4 21.2 19.8 18.4 10
12 16.7 15.6 14.4 16.7 15.6 14.5 16.7 15.6 14.4 16.6 15.5 14.4 16.6 15.4 14.3 16.5 15.4 14.2 16.4 15.3 14.1 12
14 13.5 12.6 11.6 13.6 12.6 11.7 13.5 12.6 11.6 13.5 12.5 11.6 13.4 12.5 11.5 13.3 12.4 11.4 13.2 12.3 11.4 14
16 11.3 10.5 9.7 11.3 10.5 9.6 11.2 10.4 9.6 11.1 10.3 9.5 11.1 10.3 9.5 11.0 10.2 9.4 16
18 9.6 8.9 8.1 9.5 8.8 8.1 9.5 8.7 8.0 9.4 8.7 8.0 9.3 8.6 7.9 18
20 8.2 7.6 7.0 8.2 7.6 7.0 8.1 7.5 6.9 8.1 7.4 6.8 8.0 7.3 6.7 20
22 7.1 6.6 6.0 7.1 6.5 5.9 7.0 6.4 5.9 6.9 6.3 5.8 22
24 6.2 5.7 5.2 6.1 5.6 5.1 6.0 5.5 5.0 24
26 5.4 4.9 4.5 5.3 4.9 4.4 26
28 4.4 4.0 3.6 4.3 3.9 3.5 28
30 3.3 2.9 2.6 30
TLT 11913217 M00000 V2

Max. lifting capacity with mechanical grab is 27.5 t. For higher lifting capacities a hydraulic grab is required.
Stability calculated according to EN 996:1995. Machine standing on firm, horizontal ground.

HS 8100 HD – 8004.02 9
Working range - main boom 84° – 15°
with 32.3 t counterweight and 15 t carbody counterweight (main boom No. 1311.24)

ft m Auxiliary jib 25 t
210 64 84°
80°
200
60 70°

°
56 60
180
52
°
160 50 2000
48 m The maximum capacity of
59 the auxiliary jib is 25 t. The
m
44 56 corresponding load chart
140 m is programmed in the LMI
°

53
40

m system.
40
50
m
120 47
36 m
44
°

m
30

32 41
100 m
38
m
28 35
m
32
80 24 m
29
m
20°

20 26
m
60 23
m
16 20
15°

m
17
40 12 m
14

8
20
4

0 0
60 56 52 48 44 40 36 32 28 24 20 16 12 8 4 0m

200 180 160 140 120 100 80 60 40 20 0 ft

Main boom configuration

from 11 m to 59 m (Table 1 - No. 1311.24)
Length Configuration for boom lengths
Boom foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom section 3.0 m 1 1 1 1 1 1 1 1
Boom section 6.0 m 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8
Boom head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Boom length (m) 11 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59
Auxiliary jib applicable               

10  HS 8100 HD – 8004.02

Load chart for lifting operation
counterweight 26.3 t 23.3 t 20.3 t

Capacities in metric tonnes for boom lengths (11 m - 29 m) - with 275 kN winches
Boom length in (m)
Radius 11.0 14.0 17.0 20.0 23.0 26.0 29.0 Radius
(m) t t t t t t t t t t t t t t t t t t t t t (m)
3.0 100.0 98.2 100.0 100.0 100.0 3.0
4.0 84.5 100.0 86.8 84.6 84.5 78.8 79.0 73.7 74.2 69.1 74.6 69.8 65.1 70.4 65.9 61.4 4.0
5.0 71.3 91.3 67.3 62.7 63.7 59.3 64.5 60.4 56.3 61.3 57.4 53.4 58.4 54.6 50.9 55.7 52.1 48.5 5.0
6.0 59.8 55.9 66.4 57.0 53.3 49.6 54.4 50.9 47.4 52.1 48.7 45.3 49.9 46.6 43.4 47.8 44.7 41.5 45.9 42.9 39.8 6.0
7.0 47.4 44.3 52.1 47.1 44.0 40.9 45.2 42.3 39.3 43.5 40.6 37.8 41.9 39.1 36.4 40.3 37.6 35.0 38.9 36.3 33.7 7.0
8.0 38.8 36.3 41.2 38.9 36.4 33.8 38.6 36.1 33.5 37.2 34.8 32.3 36.0 33.6 31.2 34.7 32.4 30.1 33.6 31.3 29.1 8.0
9.0 32.7 30.6 33.7 32.8 30.7 28.5 32.9 30.7 28.5 32.5 30.3 28.1 31.4 29.3 27.2 30.4 28.4 26.3 29.5 27.5 25.4 9.0
10.0 28.2 26.3 28.4 28.3 26.4 24.5 28.3 26.4 24.5 28.3 26.4 24.5 27.9 26.0 24.1 27.0 25.2 23.3 26.2 24.4 22.6 10.0
12.0 20.6 20.4 24.4 22.0 20.6 19.1 22.0 20.6 19.1 21.9 20.5 19.0 21.9 20.5 19.0 21.8 20.4 18.8 21.3 19.9 18.3 12.0
14.0 18.9 17.8 16.6 15.3 17.9 16.6 15.4 17.8 16.6 15.3 17.8 16.5 15.2 17.7 16.4 15.1 17.5 16.3 15.0 14.0
16.0 14.9 13.8 12.7 14.8 13.7 12.7 14.8 13.7 12.6 14.6 13.6 12.5 14.5 13.4 12.4 16.0
18.0 12.5 11.6 10.6 12.5 11.6 10.7 12.5 11.6 10.6 12.4 11.4 10.5 12.3 11.3 10.4 18.0
20.0 10.8 9.9 9.1 10.7 9.9 9.1 10.6 9.8 8.9 10.5 9.7 8.8 20.0
22.0 9.3 8.5 7.8 9.2 8.4 7.7 9.1 8.3 7.6 22.0
24.0 8.0 7.4 6.7 7.9 7.3 6.6 24.0
26.0 7.0 6.4 5.8 7.0 6.3 5.7 26.0
28.0 6.1 5.6 5.0 28.0
TLT 11910111 M00000 V2

counterweight 26.3 t 23.3 t 20.3 t

Capacities in metric tonnes for boom lengths (32 m - 53 m) - with 275 kN winches
Boom length in (m)
Radius 32.0 35.0 38.0 41.0 44.0 47.0 50.0 53.0 Radius
(m) t t t t t t t t t t t t t t t t t t t t t (m)
4.0 66.0 61.7 57.5 4.0
5.0 53.2 49.7 46.3 50.9 47.5 44.2 48.7 45.5 42.3 46.7 43.6 40.5 44.2 41.8 38.8 5.0
6.0 44.1 41.2 38.2 42.4 39.6 36.7 40.7 38.0 35.3 39.2 36.6 33.9 37.8 35.2 32.7 36.4 33.9 31.4 34.1 32.7 29.8 6.0
7.0 37.5 35.0 32.4 36.1 33.7 31.3 34.9 32.5 30.1 33.7 31.4 29.1 32.5 30.3 28.0 31.4 29.2 27.0 30.4 28.2 29.3 7.0
8.0 32.5 30.3 28.0 31.4 29.3 27.1 30.4 28.3 26.2 29.4 27.3 25.3 28.4 26.4 24.4 27.5 25.6 23.6 26.6 24.7 25.8 8.0
9.0 28.5 26.6 24.6 27.7 25.7 23.8 26.8 24.9 23.0 26.0 24.1 22.3 25.1 23.4 21.5 24.4 22.6 20.8 23.6 21.9 22.9 9.0
10.0 25.4 23.6 21.8 24.6 22.9 21.2 23.9 22.2 20.6 23.2 21.5 20.0 22.5 20.8 19.3 21.8 20.3 18.7 21.1 19.7 20.5 10.0
12.0 20.6 19.3 17.8 20.2 18.7 17.2 19.6 18.1 16.7 19.0 17.6 16.2 18.5 17.1 15.7 17.9 16.5 15.2 17.4 16.0 16.9 12.0
14.0 17.3 16.0 14.8 16.8 15.6 14.3 16.3 15.1 13.9 15.9 14.6 13.4 15.4 14.2 13.0 14.9 13.7 12.6 14.5 13.3 14.0 14.0
16.0 14.4 13.3 12.2 14.3 13.2 12.1 13.9 12.8 11.7 13.5 12.4 11.3 13.0 12.0 10.9 12.6 11.6 10.5 12.2 11.2 11.8 16.0
18.0 12.1 11.2 10.2 12.0 11.1 10.1 11.8 10.9 10.0 11.6 10.6 9.6 11.2 10.2 9.3 10.8 9.9 8.9 10.5 9.5 10.1 18.0
20.0 10.4 9.5 8.7 10.2 9.4 8.6 10.1 9.2 8.4 9.9 9.1 8.3 9.7 8.8 8.0 9.4 8.5 7.6 9.0 8.2 8.7 20.0
22.0 9.0 8.2 7.5 8.8 8.1 7.3 8.7 7.9 7.2 8.5 7.8 7.0 8.4 7.6 6.9 8.1 7.3 6.6 7.8 7.0 7.5 22.0
24.0 7.8 7.1 6.4 7.7 7.0 6.3 7.5 6.8 6.2 7.4 6.7 6.0 7.2 6.5 5.8 7.1 6.4 5.7 6.8 6.1 6.5 24.0
26.0 6.8 6.2 5.6 6.7 6.1 5.5 6.6 5.9 5.3 6.4 5.8 5.2 6.2 5.6 5.0 6.1 5.5 4.8 5.9 5.3 5.6 26.0
28.0 6.0 5.4 4.9 5.9 5.3 4.7 5.7 5.2 4.6 5.6 5.0 4.4 5.4 4.8 4.3 5.3 4.7 4.1 5.1 4.5 4.9 28.0
30.0 5.3 4.8 4.2 5.2 4.6 4.1 5.0 4.5 4.0 4.9 4.4 3.8 4.7 4.2 3.7 4.6 4.0 3.5 4.4 3.9 4.2 30.0
32.0 4.7 4.2 3.7 4.6 4.1 3.6 4.4 3.9 3.4 4.3 3.8 3.3 4.1 3.6 3.1 4.0 3.5 3.0 3.8 3.3 3.6 32.0
34.0 4.0 3.5 3.1 3.9 3.4 2.9 3.7 3.3 2.8 3.6 3.1 2.6 3.4 3.0 2.5 3.3 2.8 3.1 34.0
36.0 3.4 3.0 2.5 3.3 2.8 2.4 3.1 2.7 2.2 3.0 2.5 2.1 2.8 2.3 2.6 36.0
38.0 3.0 2.5 2.1 2.8 2.4 2.0 2.7 2.3 1.8 2.5 2.1 1.7 2.4 1.9 2.2 38.0
40.0 2.4 2.0 1.7 2.3 1.9 1.5 2.2 1.8 1.4 2.0 1.6 1.8 40.0
42.0 1.9 1.6 1.2 1.8 1.4 1.1 1.6 1.3 1.5 42.0
44.0 1.6 1.3 1.5 1.1 1.3 1.2 44.0
46.0 1.2 1.0 46.0
TLT 11910111 M00000 V2

Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cab or manual. Load charts for lifting operation
are valid with classification according to ISO 4301-1/1986, group A1.

HS 8100 HD – 8004.02 11
Load chart for lifting operation
counterweight 26.3 t 29.3 t 32.3 t and 15 t carbody counterweight
Capacities in metric tonnes for boom lengths (11 m - 32 m) - with 275 kN winches
Boom length in (m)
Radius 11 14 17 20 23 26 29 32 Radius
(m) t t t t t t t t t t t t t t t t t t t t t t t t (m)
3 100.0 100.0 100.0 100.0 100.0 3
4 100.0 100.0 100.0 100.0 97.9 97.9 99.1 100.0 93.1 96.9 74.6 87.7 92.3 70.4 82.8 87.3 66.0 77.6 77.6 4
5 89.6 94.4 84.5 88.1 80.0 84.3 64.5 75.9 80.0 61.3 72.2 76.1 58.4 68.8 72.5 55.7 65.6 69.2 53.2 62.7 66.1 5
6 59.8 70.4 74.2 57.0 67.1 70.7 54.4 64.1 67.6 52.1 61.4 64.7 49.9 58.8 62.0 47.8 56.4 59.5 45.9 54.2 57.1 44.1 52.1 54.9 6
7 47.4 55.8 58.8 47.1 55.5 58.6 45.2 53.4 56.3 43.5 51.3 54.2 41.9 49.5 52.2 40.3 47.7 50.3 38.9 46.0 48.5 37.5 44.4 46.8 7
8 38.8 45.8 48.3 38.9 45.9 48.4 38.6 45.6 48.1 37.2 44.0 46.5 36.0 42.6 44.9 34.7 41.2 43.5 33.6 39.8 42.1 32.5 38.5 40.7 8
9 32.7 38.7 40.9 32.8 38.8 41.0 32.9 38.8 41.0 32.5 38.5 40.6 31.4 37.3 39.4 30.4 36.1 38.2 29.5 35.0 37.0 28.5 34.0 35.9 9
10 28.2 33.4 35.3 28.3 33.5 35.4 28.3 33.5 35.4 28.3 33.5 35.4 27.9 33.1 35.0 27.0 32.1 34.0 26.2 31.2 33.0 25.4 30.3 32.1 10
12 20.6 20.6 20.6 22.0 26.1 27.6 22.0 26.1 27.7 21.9 26.1 27.6 21.9 26.0 27.5 21.8 25.9 27.4 21.3 25.5 27.0 20.6 24.8 26.2 12
14 17.8 21.1 22.4 17.9 21.2 22.5 17.8 21.2 22.4 17.8 21.1 22.4 17.7 21.0 22.2 17.5 20.9 22.1 17.3 20.7 22.0 14
16 14.9 17.8 18.9 14.8 17.8 18.8 14.8 17.7 18.8 14.6 17.6 18.7 14.5 17.5 18.5 14.4 17.3 18.4 16
18 12.5 15.1 16.0 12.5 15.1 16.1 12.5 15.1 16.0 12.4 14.9 15.9 12.3 14.8 15.8 12.1 14.7 15.6 18
20 10.8 13.0 13.9 10.7 13.0 13.8 10.6 12.9 13.7 10.5 12.8 13.6 10.4 12.6 13.5 20
22 9.3 11.3 12.1 9.2 11.3 12.0 9.1 11.2 11.9 9.0 11.0 11.8 22
24 8 9.9 10.6 7.9 9.8 10.5 7.8 9.7 10.4 24
26 7 8.8 9.4 7.0 8.7 9.3 6.8 8.5 9.2 26
28 6.1 7.7 8.3 6.0 7.6 8.2 28
30 5.3 6.8 7.3 30
32 4.7 6.0 6.5 32
TLT 11910111 M00000 V2

counterweight 26.3 t 29.3 t 32.3 t and 15 t carbody counterweight

Capacities in metric tonnes for boom lengths (35 m - 59 m) - with 275 kN winches
Boom length in (m)
Radius 35 38 41 44 47 50 53 56 59 Radius
(m) t t t t t t t t t t t t t t t t t t t t t t t t t (m)
5 50.9 60.0 63.3 48.7 57.5 57.7 46.7 50.4 50.4 44.2 44.2 44.2 5
6 42.4 50.1 52.9 40.7 48.2 50.9 39.2 46.5 47.1 37.8 43.2 43.2 36.4 38.9 38.9 34.1 34.1 34.1 29.8 29.8 29.8 26.1 26.1 22.8 22.8 6
7 36.1 42.9 45.3 34.9 41.4 43.7 33.7 40.0 42.3 32.5 38.7 40.0 31.4 36.1 36.1 30.4 32.8 32.8 29.3 29.3 29.3 26.1 26.1 22.8 22.8 7
8 31.4 37.3 39.4 30.4 36.1 38.2 29.4 35.0 37.0 28.4 33.9 35.9 27.5 32.9 34.2 26.6 31.2 31.2 25.8 28.0 28.0 24.7 24.7 21.8 21.8 8
9 27.7 33.0 34.9 26.8 32.0 33.8 26.0 31.0 32.8 25.1 30.1 31.9 24.4 29.2 30.2 23.6 28.4 28.5 22.9 26.7 26.7 23.7 23.7 20.8 20.8 9
10 24.6 29.4 31.2 23.9 28.6 30.3 23.2 27.8 29.4 22.5 27.0 28.6 21.8 26.2 27.2 21.1 25.5 25.7 20.5 24.2 24.2 22.0 22.0 19.5 19.5 10
12 20.2 24.1 25.5 19.6 23.4 24.8 19.0 22.8 24.2 18.5 22.1 23.5 17.9 21.5 22.8 17.4 20.9 21.6 16.9 20.3 20.5 19.0 19.0 16.4 16.4 12
14 16.8 20.3 21.5 16.3 19.8 20.9 15.9 19.2 20.5 15.4 18.7 19.9 14.9 18.2 19.1 14.5 17.7 18.3 14.0 17.1 17.5 16.6 16.6 14.3 14.3 14
16 14.3 17.2 18.3 13.9 16.9 18.0 13.5 16.4 17.5 13.0 16.0 17.0 12.6 15.5 16.6 12.2 15.1 16.1 11.8 14.7 15.1 14.1 14.3 12.5 12.5 16
18 12.0 14.6 15.5 11.8 14.4 15.4 11.6 14.2 15.2 11.2 13.8 14.8 10.8 13.4 14.4 10.5 13.0 14.0 10.1 12.6 13.3 12.1 12.5 11.1 11.1 18
20 10.2 12.5 13.4 10.1 12.4 13.2 9.9 12.2 13.1 9.7 12.1 12.9 9.4 11.7 12.6 9.0 11.3 12.2 8.7 11.0 11.8 10.5 11.2 10.0 10.0 20
22 8.8 10.9 11.6 8.7 10.7 11.5 8.5 10.6 11.3 8.4 10.4 11.2 8.1 10.3 11.0 7.8 10.0 10.7 7.5 9.6 10.4 9.2 9.9 8.9 9.2 22
24 7.7 9.5 10.2 7.5 9.4 10.1 7.4 9.2 9.9 7.2 9.1 9.8 7.1 8.9 9.6 6.8 8.8 9.4 6.5 8.5 9.2 8.1 8.7 7.7 8.4 24
26 6.7 8.4 9.0 6.6 8.3 8.9 6.4 8.1 8.7 6.2 8.0 8.6 6.1 7.8 8.4 5.9 7.6 8.3 5.6 7.5 8.1 7.2 7.8 6.9 7.4 26
28 5.9 7.5 8.0 5.7 7.3 7.9 5.6 7.2 7.7 5.4 7.0 7.6 5.3 6.9 7.4 5.1 6.7 7.3 4.9 6.5 7.1 6.3 6.9 6.0 6.6 28
30 5.2 6.6 7.2 5.0 6.5 7.0 4.9 6.4 6.9 4.7 6.2 6.7 4.6 6.0 6.6 4.4 5.9 6.4 4.2 5.7 6.2 5.5 6.1 5.3 5.8 30
32 4.6 5.9 6.4 4.4 5.8 6.3 4.3 5.6 6.1 4.1 5.5 6.0 4.0 5.3 5.8 3.8 5.2 5.7 3.6 5.0 5.5 4.8 5.3 4.6 5.2 32
34 4.0 5.3 5.8 3.9 5.2 5.6 3.7 5.0 5.5 3.6 4.9 5.3 3.4 4.7 5.2 3.3 4.5 5.0 3.1 4.4 4.8 4.2 4.7 4.0 4.5 34
36 3.4 4.6 5.0 3.3 4.5 4.9 3.1 4.3 4.8 3.0 4.2 4.6 2.8 4.0 4.4 2.6 3.8 4.3 3.7 4.1 3.5 3.9 36
38 3.0 4.1 4.5 2.8 4.0 4.4 2.7 3.8 4.2 2.5 3.7 4.1 2.4 3.5 3.9 2.2 3.3 3.8 3.2 3.6 3.0 3.4 38
40 2.4 3.5 3.9 2.3 3.4 3.8 2.2 3.2 3.6 2.0 3.1 3.5 1.8 2.9 3.3 2.7 3.1 2.6 3.0 40
42 1.9 3.0 3.3 1.8 2.8 3.2 1.6 2.7 3.0 1.5 2.5 2.9 2.3 2.7 2.2 2.5 42
44 1.6 2.6 2.9 1.5 2.5 2.8 1.3 2.3 2.7 1.2 2.1 2.5 2.0 2.3 1.8 2.2 44
46 1.2 2.1 2.5 1.0 2.0 2.3 1.8 2.2 1.6 2.0 1.5 1.8 46
48 1.7 2.0 1.5 1.8 1.3 1.7 1.2 1.5 48
50 1.4 1.7 1.2 1.5 1.1 1.4 1.2 50
TLT 11910111 M00000 V2

Above load charts are for reference only. For actual lift duty please refer to load chart in operator’s cab or manual. Load charts for lifting operation
are valid with classification according to ISO 4301-1/1986, group A1.

12  HS 8100 HD – 8004.02

Self-assembly system

Unloading of basic machine (option)

Unloading and assembly of crawlers

Unloading of basic machine (standard)

Unloading and assembly of carbody counterweight Unloading and assembly of boom

Unloading and assembly of counterweight

Assembly of boom and reeving of hoist ropes

HS 8100 HD – 8004.02 13
14  HS 8100 HD – 8004.02
Notice

HS 8100 HD – 8004.02 15
 HS 8100 HD – 10098997 – Version 04 – 01/2017 Subject to change without notice.

Liebherr-Werk Nenzing GmbH

Dr. Hans Liebherr Str. 1, 6710 Nenzing/Austria
Tel.: +43 50809 41–473, Fax: +43 50809 41–499
[email protected], www.liebherr.com
facebook.com/LiebherrConstruction