Troubleshooting
Troubleshooting
Level 3 Repair
PBA ( Bottom )
PBA ( Top)
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
SAMSUNG
FCC ID : A3LSMA326B
CONFIDENTIAL
SM-A326B/BR/M326B
A32 5G BB Block Diagram Common
LPDDR4A/B_DQ(0~15),LPDDR4A_DQS_0/1_P/N
VS2_PMU_1P35
LDO RCAM1_DVDD_1P05
REAR CAMERA VUFS18_PMU,VEMC_PMU
TLV75511PDQNR
RCAM1_SENSOR_I2C_SDA/SCL
RCAM1_3_4_FCAM_EEP_SDA/SCL
LPDDR4A/B_CLK_P/N, LPDDR4A/B_CKE_0/1, LPDDR4A/B_CS_0/1,
LPDDR4A/B_CA(0~5), LPDDR4B_DMI_0/1 uMCP MEMORY
VS1_PMU_2P0 LDO CAM_VDDIO_1P8 RCAM1_MCLK
UFS_REFCLK,UFS_RST_N
EMI_VDD1,2
ET51518YB RCAM1_MIPI_D0~D3,CLK
VSYS
LDO RCAM1_AVDD1_2P8 48M(Wide) RCAM1_RST_N,FSYNC_MAIN_OUT UFS_TX_0/1_P/N,UFS_RX_D0/1_P/N
ET51529YB RCAM2_SENSOR_I2C_SDA/SCL
CARD
RCAM3_SENSOR_I2C_SDA/SCL VDD_VIM2_1P8_3P0
ET51512YB RCAM1_3_4_FCAM_EEP_SDA/SCL
SIM2_RST, SIM2_CLK
VSYS
LDO RCAM2_AVDD_2P8
RCAM3_MCLK
RCAM3_MIPI_D0~D3,CLK
SIM2_DATA
SIM2
ET51528YB 8M(UW) RCAM3_RST_N,FSYNC_MAIN_OUT VDD_NFC_SIM1_1P8_3P0
VS1_PMU_2P0
LDO RCAM3_DVDD_1P2
RCAM4_SENSOR_I2C_SDA/SCL
SIM1_RST, SIM1_CLK, NFC_SWP
SIM1_DATA
SIM1
ET51512YB
SIM_TRAY_DET
VSYS
LDO RCAM3_AVDD_2P8
5M(Macro)
RCAM4_MCLK
ET51528YB
RCAM4_MIPI_D0,CLK
RCAM4_RST_N,FSYNC_MAIN_OUT
TSP VDD_TSP_A3P0
ILI9882N(ILITEK)
VS1_PMU_2P0
LDO RCAM4_DVDD_1P2
ET51512YB
OCTA_MIPI_D0~D3, CLK
VSYS
LDO FCAM_AVDD_2P8 FCAM_MCLK
LCD
VDD_LCD_1P8
FCAM_RST_N
VDD_LCD_ELVSS_-4P4
6.5" HD+
VS2_PMU_1P35
LDO FCAM_DVDD_1P05
LCD DC/DC
VDD_LCD_ELAVDD_7P3
RP109L111D-TR
EL_ON1_DET
EL_ON1,EL_ON2 Vcut VDD_LCD_3P0
PWRKEY
VOL/DN
TXC
RCV
RCV_OUT_P/N SENSOR
AUD_NLE,DAT,CLK I2S
VDD_MAIN_MICBIAS_2P8 SENSOR_SPI_MISO
MAIN MIC MAIN_MIC_P/N
SYSRSTB,SRCLKENA0/1, WATCHDOG 6AXIS_INT,6AXIS_INT2
ACC + GRYO VDD_SENSOR_1P8
AP
SUB MIC SUB_MIC_P/N
SENSOR_SCL,SDA MAGNETIC
MMC5633NJ
EAR_MICBIAS_2P7
MT6853
SCP_VREQ_VAO
EAR_OUT_R/L_IN PROXY_INT PROXY
EAR_MIC_3.5_P
EAR_L_DET
STK33519
PWRAP_SPI0
VPROC1/2,VCORE,VPU,VS1/2,
VMODEM,VGPU11/12
PMIC #1 AP_PMIC_CLK_32K
VFE28,VAUX18,VBIF28,VUSB,VIBR,
VCN33_1/2,VEMC,VSIM1,VSIM2, MT6359 VSYS GRIP_INT1
GRIP (MAIN)
VIO28,VUFS,VCN18,VRF18,VIO18,
VEFUSE, VM18, VCAMIO, VAUD18 GRIP1_SCL,SDA_1P8
A96T356HF
VDD_GRIP_3P0
LDO VSYS
ET51530YB
GRIP_INT2
GRIP (SUB)
GRIP2_SCL,SDA
A96T356HF
VDD_BTP_3P3
Finger VDD_BTP_3P3
VSYS
NFC_EN
NFC
VDD_SIM1_1P8_3P3
NFC_FIRM
VBUCK1~4 NFC_IRQ
VDD_NFC_SIM1_1P8_3P0
SPMI_M_I2C NFC_CLK_REQ
S3NRN4VX
BUCKPMIC EINT_6315_1,EXT_PMIC_PG NFC_SCL/SDA_1P8
PVDD1~4
EXP_PMIC_EN2, SRCLKENA0/1,WATCHDOG
VSYS MT6315
CONN_TOP/WB/BT_CLK/DATA
WF0/BT_/Q_IP/IN MT6631
GPS_I/Q
FLASH
SUB_PMIC1_I2C_SCL/SDA_1P8 SPK
Type -C
CC1/2
SUB PMIC CC1/2
SPK_I2S3_DO/DI/WS/BCLK
SPK AMP VSYS
VSYS
SMA1303-W
Battery VIO18_PMU
V_BATTERY
5000mAh
VDD_VIB_3P3
M
FCC ID : A3LSMA326B
SAMSUNG
CONFIDENTIAL A32_5G RF BLOCK Diagram SM-A326B/BR/M326B
Common 2020.12.04
RFFE 3
MB PA SKY77652-31
TX0_PA_OUT_B3_N3
MT6190W TX0_TR_OUT_MB
TX0A0_MB0
Transceiver TX0_PA_OUT_B1_N1 MXD8648MS SAFFB2G65AA0F0A
SP4T PRX_LNA_IN_N7_4RX
RFFE0
MXD8018MS SAFFB2G59AA1F3K
PRX_LNA_IN_N41_4RX
B1 LNA SRS_OUT1_N41
RFFE 0
MXD8548E
DRX_TR_IN_B1_4RX
RXD_MHB_LNA11 SP4T
LNA MIPI_ANT0
MXD8018MS
DPX252690DT-5325A1K
SAHQV1G74BA0H3K Diplexer
B3 LNA (#S2-1-1)
B1/3
RFFE 0
DRX_TR_IN_B3_4RX (#S2-1-2)
RXD_MHB_LNA10
(#S2-1)
LNA
SUB ANT 2
LFD181G65MPUF177 MB TRX2
Diplexer DRX MIMO B1/3
MXD8625ES
(#S2) Embeded
PRX MIMO N7/41/78
RFFE 0 LFB213G50CT2E367 SPDT Coupler
PRX_TR_IN_N78_4RX SRS_OUT1_N78
RXP_UHB_LNA26
LNA (#S2-2)
BGS14MPA9 RXD_CB_LNA23
RFFE1
LFB213G50CT2E367 TX0_PA_OUT_GSMHB
SRS_OUT2_N79
DRX_TR_IN_N78
RXD_UHB_LNA22
TX : RFFE 2 TRX_B28
LNA
RX : RFFE 0
SKY58081-11
L PAMID
TX0_TR_OUT_GSMHB
TX0A0_MB1
TX0_TR_OUT_GSMLB
TX0A0_LB1
ANT LB (#M1-1)
CABLE_DET_MIMO
LFD181G65MPUF177
TX0A0_LB0
TX0_TR_OUT_LOW
Diplexer MXD8648MS
MXD8018US
N78 LNA
SP4T (#M3-1-1)
(#M3-1) RFFE1
(#M3) RFFE 2
CABLE_DET_LMB
DRX_TR_IN_N78_4RX
RXD_UHB_LNA20 PRX_TR_IN_B12_17_20_28 DPX252690DT-5075C1K DPX202690DT-4343A1K
RXP_LB_LNA03
Diplexer
LNA
SRS_OUT3_N79
LFB213G50CT2E367
PRX_TR_IN_B5_8_GLB Diplexer
RXP_LB_LNA02
ANT MB(#M1-2) MAIN ANT 1
MAIN ANT 3/4
SRS_OUT3_N78
(#M1) LB TRX
DRX MIMO N78/N79 RXD_CB_LNA21 MB TRX1
PRX MIMO 1/3 (#M3-1-2) N7,41 DRX
RFIC_PDET
MXD8018MS MRX0 (#M1-3)
B3 LNA
SFWG42CBB02
RFFE1
NR_CPL_OUT_TX1
MRX1
B1/3
(#M3-2-1) PRX_TR_IN_B3_4RX CPL_TX0_HB SAFFB2G65AA0F0A
RXP_MHB_LNA14
LNA RFFE 3
DRX_LNA_IN_N7_4RX
(#M3-2) CPL_TX1_MHB BGS14WMA9
RFFE4
SP4T
SRS_OUT2_N41
MXD8018MS TX0_PA_OUT_B2 TX0_PA_OUT_B40
SAFFB2G59AA1F3K
B1 LNA TX : RFFE 2
RFFE1 QM77048S RX : RFFE 0 DRX_LNA_IN_N41_4RX
GRIP 1
DRX_LNA_IN_B4_66
MXD8621E TRX_B2 TRX_B40 SRS_OUT1_N41
B41 Rx
SPDT
MXD8621E PRX_LNA_IN_N41_4RX
SPDT SRS_OUT3_N41
DRX_LNA_IN_B2_PCS PRX_LNA_IN_N7_4RX B7519
B40 Rx DRX_TR_IN_B2_3_GHB
Diplexer PRX_TR_IN_B7_41_N41_4RX
DRX L/M/HB B7 Rx
RXP_MHB_LNA16
SP4T
PRX_TR_IN_B1_4_66
RXP_MHB_LNA19
MIPI_ANT0 DRX_TR_IN_B5_8_GLB
RXD_LB_LNA00
B8 Rx
PRX_LNA_IN_G1900_B2
SAFFB742MAA0F3K DRX_LNA_IN_G850_B5_26
LB_TRX1
DRX_ANT_LB DRX_LNA_IN_EGSM_B8
SAYEY1G88BA0B3K
B7502
LB_TRX2
LB_TRX3 SFH806BA002
TX : RFFE 4 CPL
TX0_PA_OUT_B2
LB_TRX4 RX : RFFE 0 QM78207
5G L-PAMID(N78) QM12114
SP4T
RXP_CB_LNA27 TX1_TR_OUT_N78
RFFE5
SUB ANT 4
SRS_OUT1_N78
TX1A0_HB0
PA Tx-Rx
SW BPF
SRS_OUT2_N78
SRS_OUT3_N78
(#S4)
CPL
ANT N78 TRX
RXP_UHB_LNA24
PRX_TR_IN_N78 HPF
LNA
NR_CPL_OUT_N79
CPL_TX1_MHB
SUB PCB
SUB ANT 3
TX1A0_CB0
N79 TRX
GRIP_SENSOR_2
RXP_CB_LNA25
MAIN ANT 1
LB/MB TRX
QM133025
QM13324A
RFFE4 VIO
MT6631N/B
S/W SCLK
ANT S/W
SDATA
BT/WIFI/GPS
MXDLN16U
GPS LNA
GPS SFHG89BF302 RFFE1
MT6359
PMIC
XO_IN XO_WCN
WB_RF_2G
SFWG45AQE02 WB_RF_2G
2.4G(SAW)/5G DIPLEXER
BT/WIFI ANT
BT/WIFI MAIN ANT 4
N41 PRX MIMO
WLAN_RF_5G
WF_RF_5G
TP3016
R1003
TP3017
U3008
L1125
GAS6001
C3058
R3010
Common
C2077
C2007
L2004
L2047
C2015
C2014
C2013
C2078
C2012
CD6000
L2012
PAM2000
L2011
C2126 C2028
L2018
L2014
C2074
C2033
SM-A326B/BR/M326B
L2017 L2016
SC6000
R2011 L2015
U2003
R2010 C2010
C5149
ANT5006
C5144
ANT5005
TP_UB_GND
C6010
ZD4001
TP_UB
TP4002
TP4001
C5136
L1141
C2119 TP6000 R7009
TP7010
JTAG4002
ZD4000
R6000 R4003 R4002 TP_NFC_FIRM
R7002 R7000 R7001
L2058 TP5000
R7004
R4059 R3006
C1180
TP4000 TP_BCLK
R6034
R4031
R4029 R4032 TP_DI TP5026
F1005
R4030
R4039
C2089 R6036 TP5001
ANT6001
TP5021
R6023
TP3014 TP5023
C4012
TP5027
C7014
C7006
C7000
C7005
TP_WS TP_DO TP7006
R4038 R4041
R5020
R5017
HDC4000
C2091 L1077 L1071
R4040
L6010
C2101
Q5002
SC6002 L6006
C1142
C3060
C4017
U2005 R6003 C6014
C2105
C2019
C2099
C4082
U1038
C1125
R6002
C4037
TH4000
C2106
C2115
U3006
R4004
ANT6000
C5040
C2095
C2084
C2090
C2096
TP7008 TP7007 TP5022
C3059
L2061 C5039
U2015
C7051
R4001
C2121
C2107
R4056
TP2006
C4013 C4077
C4008
C4006
C6012
C5025 C6027 C7209
TP5019
C2102 TP5010 TP5009
C5023
C5026
C2113
C2114
U7009
C2087
C5072
C2112
L6002
C4015
C4016
L2060
ZD6002
ZD6000
C7052
C2104
C7053
C2117 C4035
R4000 R6001
C7049
TP5025
R5042
C5034
C5035
TP4003
C5070
C4080
C4001 L6001
TP4004
C4044 L5018
L1058
C1021
C1068
L5019
U7010
C1035
C1112
L1019
L1044
L1055
C1052
C1067
C1103
C4020 C5029 C7045
U1027
C4079 C5142 C5152
C5104
L6003
C4081
C1063
C5153
C1111
C5078
C4019 C5011
L1010
C2085
C4043
UCP4000 C6013 L1054 C1064 C1101
C5005
C5154
TP6008
L2063
R6016
C4038
R5005
C5015 R6004
C4042
C6015
R6005
C1151 C1149 C1102
C4000
U2007
C5086
L6005
R6029
C2098 C4062 C1043 L1026 L1047
C4045
C5107
C2017
C6017
R6007
R6006
C4011
C1051 L1029 L1048
C6016
R4019
C5097
F1015
C4014
C5014
C4036
U1017
C1161 L1135 L1067
C5019
R6022
R6008
L6013
C5016
L1136 C1158 L1066
R6027
C4007
R6025
R6033
C2083
L5015 C5000
L5006 C1136 L1113 L1122 L1110
C5176
Q6001 L1124
R6026
R6032 R6037 R6015
C6031 C6035
L1050
R4060
F1016
C5093 L1111
C6021 R6009 R6013
C6033 C6034
C5095
C5094
R1007
C6032
TP5018
C5179
C5018
C5160
C5161
L1052
R6011 R6030 R6031
C7032
C7027
C1086
L1123
L1121
U7005 R1004
CN4000
TP7011
R5016
C5186 U6001
TP7005
R1006
R6014
U7012
C7046
C7055
U1026
C5182
F1013
L1070
C1088
R1013
C7033
U7006
C7023
U1028
L1120
L1112
C5113
R1002
C5183
U7001
C7054
U7011 C1171 C1092 C1054
C7048
C5185 R7006
F1011
L1109
C1128
L1083 L1069
U5002
C5184
C5143
C7021
C7056
C7047
U7013 C1098 C1091
R5028
C5111
JTAG4001
C5036
TP7012
R5026
C5060
C5124
TH4003
C5106 C5059 C5057
C5055
C5181
C5117
L5013 ZD5000 C5061
MIC6000
C5058
C5150 C5146
C5180
C5056
TP3015
C5076
UME5000 C5073
TP3013
ZD5005
TP3012
C5067
TP3002
TP_3000
C5126 C5068
C5051 C5066
C5063
R7008
C5065
Q7000 C5064
TP5011 TP5007
Q5000
C3052
TP3009
TP5006 TP5008
TP3003
TP5005
C5169
R5027
TP4008
R5046
R5013
ZD5002
C7063
TP3008
TP5015
TP4007
U3003
TP7000
TP5014
C5087 C7058
C7064
ZD6006 C5079
TP7002
TP7013
R5003
R5007
R5004
C5085
R5030 C5081
C5050
C5054
C5048
C5047
R7011
C3051
C3057
R7005 U3007
U7002 TP5024 TP5012
ZD5003
C5172
C7028
C7025
C5080 C5049
SOC7002
SOC7004
C3046
Date :
C7007
Resin :
C1089
C2023
Model :
C2072
R4054 L2021 F2002
L1068
R4057
R4007
R4055
R4058
L2020
Charge :
Contact :
Routing :
TP4015
L2054
Revision :
C3039
C7010
U3002 U2002
C7030
C2008
C2016
U1001
R7012
C3036
C2111
L2029
L2019
L2023
U7003
C2100 C7022
L2030
L2062
C2029
C7029
C2097
C2103
TP4011
U2004
F1012
C2093
L2031
C2116
TP4012
C1122 C1119
C2109
C2110
L1057
C1131
C1124
U1040
C2120
C2088
C2094
U2006 L1108 L1130
L1102
TP7004
F1010
CON6001
L1105
L2059
C7031
C2092
ZD7001
U7004
SC6001
C1114 C1120 L1103
Manufacture Count :
TP4010
TP4009
C1123
C7011
U1034
C1144 C1141
C1160
SOC7001
C7013
C1140
C7012
C1127
C1146
C1153 F1014
C1152
C1138 C1135
U1030
U1032
ANT5003 ANT5004 ANT5002
GAS6000
Created date of PCB data : 2020/12/3 08:53:52
VX_SETUP(2020-11-25)_HHP
Model :
Revision :
Manufacture Count :
Charge :
Contact :
Date :
Routing :
Resin :
VX_SETUP(2020-11-25)_HHP
Created date of PCB data : 2020/12/3 08:53:52
C1097
ANT1004
C1079
ANT3002
ANT2002
ANT3003
C1182
ANT1005
C1099
L1081
R1018
R6012
C6024
U1008
L1089 C1100
R1017
C1069
L1061
C3030
ANT1003
ZD6001
R6017
C6026
C6025
L6009
L3008
C1093
L1090 L1091
C3026
L2026
C3067
C1183
C1181
L1088
C1105
L2024
L1082
U1006
C3021
L3015
L3016
L1062 L1063 C3027 L2027
C3020
L3012
F3000
C3038
TP_BT_DATA
TP_WB_CTRL3000
TP_BT_CLK
TP_WB_CTRL3001
TP_WB_CTRL3002
C3042 C3054 C3053 R4005 TH4002
U3000
L3001
C3037
C3043
F1018
L3000
C3029
L3006
L3013 L3002 C3044
F1006
C3015
C3016
U3012
C3034
U3005
TP2000 TP2001
C3041
SOC7003
C7009
L3011
L3021
L2025 C2018 L2028 L3010 L3017
C7015
C3050
L3019
C7008 TP7001
L3018
ANT2000
L2010 C3033
C3025
C1108
U1037
L1094
C3056
L2007 C2004 C1143 C1104
C1110
C3045
C1148
L2053
U1041 F1007
R7007
C1107
C3055
C2006 F1001
F1009
C1150
TP4005
L1134 L1093
TP4006
C1113
U1039
L2022 U1012
L1100
U1009
C1155
TP_TOP_DATA
TP_TOP_CLK
C1170
C1116
C1118
C2026 L1011
U2008 U1014 C1121
L1020 L1098
L2013
C1109
C1024
L1038
C7019
C2060
C2001
C1126
L2000
L1017
F1003 RFS1000 L1037 C1049
C7020
C2048
L1018
C2061
C1134
F1017
F2000
L2008
PAM2001 ANT1002
L2033
OSC5000
F2001
C2076
C7024
C1133
C2009
C1139 C1137
U7007
L1024
TP3001
C2047
C2075
L1022
C2020
L1078 C2011 C1044
C1087
C1096
C2021
L1027
R1016
C3061
C2022
C5139
C1036
L1045
C2073 L2001
C2049
L2032
U1024
R2000
R2005 C2003 C2054 L2035 L2034 C2125
C5028 U1002
L1039
C1037
L1032
C7034
C2024
L1046 L1043 C1168 L1035 L1031 L1036
C5167
C5151 U1020 U2001 U2000
C1046
C1042
TH2000
PAM1000
L1132
C5027
C6022
C5077
L6007
L1006
C5021
C2055
C1038
L2036
L1025
R5041
C1015
L1041
SC6004
ANT1001
L1119
C5175 C5024
R2009
L1117
C6023
C5100
L2003
L1138
L2006
C5013
L2045
L1106
C1041
L5005 L1074 L1096 L1129
C1006
C5053
C6036
C7062
L1131
L1118
C1045
C1040
L1126
L1095
L1116
U5000
L1028
L1034
C1034
U1003
L1084
C7061
L2002
L1101
R5002
C7018
L2009
C5052
L1073
U2009
L2044
L1104
L2040
C5030 L2038
L2043
L7001
C1066
C2086
L2046
C5001
L1040
R5038
C2034
R5000 L2039
C1065 C1005
C6038 C5004 C2039
C7059 C5083 C5082
L1033
C7036
L1086
C1060
L5003
C5003
C5002
R6028
U2010
C5091
C7035 C7043 C7060 C5046 C5020 C1162
U1023
L1030
SC6003
C5088
C2053
C7037
GAS6002 C5009 C5010
C2000
L1015
U7008
C7044 C5008
C2051
C1053
C1058
C5084 C5141 C1047
C7042 L1042 C1027
L5014
C1167
C2038
C5006 C5089 C2069
C1057
C1031
U1011 RFS2001
C7016
L7006 C2068
F1008
C5007 C2057
C5037 C2002
R2008
L7004
C3013
TP5016
C1026
L7005
C5017
C2071
C5012
C2058
C6006 C1007
TP_SWDIO
C7017
CON6000
C2059
U1031
C2037
L5001
C2064
C5110
L1013
TP_D3000
C3007
C1013
R5001
C2044
C2070
U1004
U3011
TP_NFC_CLK_REQ
L7002
C5098
C5103
C2036
C2063
L1014
C5062
C5042
C2066 L2042
D7000
F1002
TP_NFC_IRQ
C2042
L5004
L2037
C1010 L1004 L1000 C1056
ANT2004
C1009
L1012
C2050
C3028
L5007
C2027
L5008
L2041
L1140 C1011
C7040
C1003 U1025
L5002
C2067
C3011
R2003
C7038
C3023
LED5000
TP3000 C2056
R2001
L5000
C3002 R2004 C2035
U1021
C1022
C2030
R2006
C2031
C2052
C2041
C2040
R2007
C3008 C2046 C2032
C5140 L2005
C5099
C5101
C5102
C4004
C1117
L1064 L1059
C1095
L1075
C7041
TP3011 TP3010
C5118
C6007
C4061
C4033
C4060
ZD1000
C1164
C1173
C1081 C1075
ANT2005
C1059
L3004 L3007 C5022
L5011
TH4001
L1099
L1137 C1172
C5116
C4026
C4027
C4025
C2127
C4058
C4028
C4057
C1072
L1051
C3005
C3006
C3018
C3022
C5044
R3001
L5012
R3000
C4065
L1107
C1094
C5075
C1166
C4056
C4055
C1085
C1030
C4059
L1139
C5038
C5041
C4050
C6003
C4047
C4032 R1011
C5045
SOC7000
C7001
C7002
C1179
C1078
C1080
C4021
C5122
C5123
L1079
C4064 C1023
C5115
C4049
C4034
C4029
L1016
C4031
U5001
C4010 C1029
L1008
C5092
C4051
L6000 U1022
L1076
C1017
C4048
C4069 C4052
C4046 C1033
C3024 R1005 RFS1002
C5090
C5074
R5006
C4041 C6020
C1039
C4078
L1080
C1025
C3019 C4068
C1084
C5112
C5108
C5109
C1002
U6000
C4083
U1013
C1082
C1032
R3002 C4039
C6000
C5135
C5125
ANT3005
C4070
ANT3004
U1043
C4040
C5032
C1083
C4022
C6037
L5009
C4072
L5010
C1163
C1176
C1019
C4063
L1007 C1020
C1157
L1065
C1156
C1014
C5127
C4073
R4006
C5096
R1012
C4002
C6001
L1005 C1177
C5128 C4076
C4075
C1129
C5033
C6040 L6019
U1000
L6014
C6005
C1048
C4067
C4023
C4054
C4074
ZD7000
C1016
C6093
C6094
L6020
C6030
F1000
C4071
C4066 R1001
R5019
R5012
L1001
C7003
R7003
C1061
L1085
L1056
ZD3001
L1003
TP_MST_DATA_B
TP_MST_DATA_A
F1004
TP5004
RFS1001
C1055
C1000
C3035 TP7009
C1174
C1008 L1002
L1053
C3032
U3001
TP3021
TP3022
TP3020
TP3007
ANT1007
L1114
SOC3000
TA3000
C3031
ANT3001 SOC6000
ZD3000
C1130
L1115
R6035
TP5030
RFS1003
ANT3000
TP3005 TP3006
C1132
R5035
C1169
R5014 R5023
TP5013
TP5017
TP3004
C3066
C6042 R3008
R6021
R6020
R4048 R6024
C6028
C6029
C5170
C5069
Q6002
U3010
TP6002
R4053 R4010
U5004
C5105
R4009 R4050
ZD6003 ZD6004
ZD6007
R5021 R5018
SM-A326B/BR/M326B
CN4001 CN4002
TP_JTAG_MUIC_D_N TP_JTAG_MUIC_D_P
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-1. Power On
Yes
No
If the voltage has not reached over 3.5V,
No replace the battery first.
Check the Battery Voltage.
Is it more than 3.5V? Even if changed the battery, the battery
voltage has not reached, replace the PBA
Yes
No
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Initial
Initial Failure
Yes
No
Abnormal
No
Abnormal
Re Check "Power on" Check the U5000 and UCP4000 (Crack
Trouble shooting process etc)
Normal
Change UCP4000
Abnormal
Change PBA
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No
No
Check the SIM Voltage.
(C3013,C4005) 1.8V or 3.0V? Change the SIM card.
Yes
No
No
Check the SIM RST / IO / CLK. Check the MAIN PBA (UCP4000)
Is signal ok?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Insert TA / USB
Yes
No
Charging Sequence Start
VBUS_IF_5P0(C5170) = 5V or 9V Replace TA/USB
Yes
No
Check the
VBUS_IF(C5171)=5V or 9V Replace U5004
Yes
No
Battery is Charging? Replace U5002
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-5. OTG
Yes
No
Check the Check U5002
VBUS_5P0(C5171) = 5V (crack, open, damaged, etc.)
Yes
No
Check the Check U5004
VBUS_IF_5P0(C5170) = 5V
(crack, open, damaged, etc.)
Yes
No
Check OTG working ? Change SUB PCB
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C3057 =1.8V Replace C3057
Yes
No
No
Check TP3013, TP3015 Replace U3007
(I2C is OK?)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage Replace C3051, C3052
C3051, C3052 =1.8V
Yes
No
Yes
No
No
Check 6Axis SDA, SCL pin Replace U3003
(SPI is OK?)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check Touch Replace Front Assy
Yes
No
No
Check U3003 Replace U3003
Yes
No
No
Check U3007 Replace U3007
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check VT CAM Replace VT CAM Module
Yes
No
No
Check LCD
Window Status Replace Front Assy
Yes
No
No
Re-download Replace SET
SW version
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C3066 =1.8V Replace C3066
Yes
No
Check U3010 No
Replace U3010
(crack, damaged, etc.)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C1052 =1.8V Replace C1052
Yes
No
Check U1052 No
Replace U1052
(crack, damaged, etc.)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check BTP connector on Main
PBA Reconnect the SOC3000
Yes
No
No
Check the voltage
C23063 = 3.3V Replace : C3063
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
No
Check the MAIN_MIC_DATA
at C6022 Replace SUB PBA
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the No
SUB_MIC_DATA at Replace U5000
C6026
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
No
Check the PWM output
at ANT10004 / ANT1008 Replace U5000
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
NO
Check the connection of Reconnect SOC6000
SOC6000 (SUB PBA)
YES
Check NO
LED_A_24P = 24V( C7038~C7041) Resolder or Replace the SUB PBA
U7008 (Main PBA)
VDD_LCD_1P8 : 1.8V (C6039)
YES
Check
VSP_5P9 = 5.9V(C7059,C7060,C6036) NO
Resolder or Replace the main PBA U7008
VSN_-5P9 = -
5.9V(C7061,C7062,C6038)
YES
No
YES
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC7001
PBA
Yes
Yes
No
Check the CAM_MCLK is
Replace the PBA
19.2Mhz (C7005)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC7002
PBA
Yes
C7009 : 1.8V
Yes
No
Check the RCAM3_MCLK is
Replace the PBA
19.2Mhz
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC9001
PBA
Yes
Yes
No
Check the RCAM4_MCLK is
Replace the PBA
19.2Mhz
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector on Main
Reconnect the SOC9001
PBA
Yes
C7019 : 1.8V
Yes
No
Check the VTCAM_MCLK is
Replace the PBA
19.2Mhz (C7014)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
No
Check the voltage
Resolder or Replace U7008 (MAIN)
VDD_LCD_1P8 (R6036) = 1.8V
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. Motor
Replace Motor
No
Check if the Clip has distorted No Replace the ANT5005 and ANT5006 on MAIN
ANT5005 and ANT5006 on MAIN PCB PCB
Yes
No
Replace U5000
Check VDD_VIB_3P3(C5149) = 3.3V
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-17. GSM 850/900, WCDMA B5/8, LTE B5/8/12/17/20/26/28, NR_SUB6 N5/8/28 PRx
YES
Resolder or change
Check C1038(SUB PBA) ≥ -65dBm? SUB PBA : ANT1000, 1003, 1007,
C1012, L1031, L1032
MAIN PBA : RFS1001
NO
Resolder or change
Check C1000 ≥ -65dBm?
L1001, C1055, C1048
YES
NO
Check component soldering status OK at Resolder or change
F1000? F1000
YES
NO
Check component soldering status OK at Resolder or change
Check U1044? U1044
YES
NO Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-18. GSM1800, 1900, WCDMA B1/2/4, LTE B1/2/3/4/66, NR SUB6 N1/3 PRx
Check status OK at NO
Change
Caxial Cable(White) and mechanical Caxial Cable(White)
material
YES
NO Resolder or change
Check C1038(SUB PBA) ≥ -65dBm? SUB PBA : ANT1000, 1003, 1007,
C1012, L1031, L1032
MAIN PBA : RFS1001
YES
YES
NO
Check component soldering status OK at Resolder or change
U1000? L1002, U1000
YES
NO
Resolder or change
Check L1004 ≥ -65dBm? L1004
NO
Check component soldering status OK at Resolder or change
U1021 U1021
YES
NO
Resolder or change
Check L1028 or L1034≥-65dBm ?
L1028 or L1034
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Check status OK at Change
mechanical material mechanical material
YES
NO Resolder or change
Check C1050 ≥ -65dBm ? RFS100, L1039, L1032
YES
YES
NO Resolder or change
Check L1007, L1000 ≥-65dBm ? C1006, C1015, U1003, C1154,
L1007, L1000, C1003, C1004
YES
YES
NO
Check C1034, C1040 ≥-65dBm ? Resolder or change
L1040
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Check status OK at Change
mechanical material mechanical material
YES
NO Resolder or change
Check C1050 ≥ -65dBm ? RFS100, L1039, L1032
YES
YES
Resolder or change
Check L1007, L1000, C1029, C1034 ≥- NO
C1006, C1015, U1003, C1154,
65dBm ? L1007, L1000, C1003, C1004,
C1033, L1008, C1029, L1016, C1034
YES
YES
NO
Check component soldering status OK Resolder or change
at U1021 U1021
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Check status OK at Change
mechanical material mechanical material
YES
YES
NO Resolder or change
Check component soldering status OK at
U2003? U2003, L2018, C2074, L2015, L2016,
L2017
YES
NO
Check component soldering status OK at Resolder or change
PAM2000? PAM2000, L2011, L2004, C2007
YES
NO Resolder or change
Receiver is O.K?
U2010
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-22. GSM 850/900, WCDMA B5/8, LTE 5/8/26, NR_SUB6 N5/8 DRx
NO
Check status OK at Change
mechanical material mechanical material
YES
NO
Check the ANT and
Check C1093 ≥ -65dBm ? resolder or change C1093, L1081
YES
NO
Check component soldering status OK at Resolder or change
F1018, F1006 ? F1018, F1006
YES
NO
Resolder or change
Check L1083 ≥ -65dBm ?
L1083
YES
NO
Check component soldering status OK at Resolder or change
U1028? U1028
YES
NO
Check L1047, L1050 ≥ -65dBm ? Resolder or change
L1047, L1048, L1050, L1052
YES
NO
Check component soldering status OK at Resolder or change
U1017? U1017
YES
NO Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO
Check status OK at Change
mechanical material mechanical material
YES
NO
Check the ANT and
Check C1093 ≥ -65dBm ?
resolder or change C1093, L1081
YES
NO
Check component soldering status OK at Resolder or change
F1018, F1006 ? F1018, F1006
YES
NO Resolder or change
Check L1083 ≥ -65dBm ?
L1083
YES
NO Resolder or change
Check component soldering status OK at
U1028? U1028
YES
NO Resolder or change
Check L1110, L1113, L1122 ≥ -65dBm ? L1109, F1011, L1111, L1112, L1120,
F1013, C1136, L1113, L1121, F1016
L1122
YES
NO Resolder or change
Check component soldering status OK
at U1017? U1017
YES
NO Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO
Check L1069, L1083 ≥ -65dBm ? Resolder or change
L1069, L1091, L1083
YES
YES
NO Resolder or change
Check L1135 ≥ -65dBm ?
C1158, L1136, F1015, C1161, L1135
YES
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO
Check L1069, L1083 ≥ -65dBm ? Resolder or change
L1069, L1091, L1083
YES
YES
NO Resolder or change
Check L1029 ≥ -65dBm ?
L1029
YES
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO
Check L1069 ≥ -65dBm ? Resolder or change
L1069, L1091
YES
YES
NO Resolder or change
Check L1026 ≥ -65dBm ?
L1026
YES
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO
Check L1069 ≥ -65dBm ? Resolder or change
L1069, L1091
YES
YES
NO Resolder or change
Check C1149 ≥ -65dBm ?
C1158, L1136, F1015, C1149
YES
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO
Check L1069 ≥ -65dBm ? Resolder or change
L1069, L1091
YES
YES
NO Resolder or change
Check C1052, C1067 ≥ -65dBm ? C1052, C1063, C1068, U1027
C1067, L1055
YES
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
NO Change
Check status OK at mechanical material mechanical material
YES
YES
YES
NO Resolder or change
Check L2002 ≥ -65dBm ? L2000, F2000, L2001, C2073,
U2000, L2002
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
Resolder or change
Check C1038(SUB PBA) SUB PBA : ANT1000, 1003, 1007,
: About 0dBm ? C1012, L1031, L1032
MAIN PBA : RFS1001
NO
Resolder or change
Check C1000 : About 0dBm ?
C1000, L1001, C1055, C1048
YES
NO
Check component soldering status OK at Resolder or change
F1000? F1000
YES
NO Resolder or change
Check L1064, L1075 : About 0dBm ? L1064, C1076, C1081, L1075
C1090, C1095
YES
NO
Check component soldering status OK at Resolder or change
Check U1044? U1044
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
Resolder or change
Check C1038(SUB PBA) SUB PBA : ANT1000, 1003, 1007,
: About 0dBm ? C1012, L1031, L1032
MAIN PBA : RFS1001
NO
Resolder or change
Check C1000 : About 0dBm ?
L1001, C1055, C1048
YES
NO
Check component soldering status OK at Resolder or change
F1000? F1000
YES
NO Resolder or change
Check L1075, L1094 : About 0dBm ? L1075, C1090, C1095, C1094
L1076
YES
NO
Resolder or change
Check C1061 : About 0dBm ?
C1061, L1053, C1175, F1004
YES
NO
Check component soldering status OK at Resolder or change
Check U1044? U1044
YES
NO Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
Caxial Cable(White) and mechanical Caxial Cable(White)
material
YES
NO Resolder or change
Check C1038(SUB PBA) : About 0dBm ? SUB PBA : ANT1000, 1003, 1007,
C1012, L1031, L1032
MAIN PBA : RFS1001
YES
YES
NO
Check component soldering status OK at Resolder or change
U1000? U1000, L1002
YES
NO
Resolder or change
Check C1165, L1004 ≥ -65dBm? C1165, L1009, C1062, L1004
NO
Check component soldering status OK at Resolder or change
U1021 U1021
YES
NO
Resolder or change
Check L1034≥-65dBm ?
L1034
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
YES
Resolder or change
Check C1038(SUB PBA) SUB PBA : ANT1000, 1003, 1007,
: About 0dBm ? C1012, L1031, L1032
MAIN PBA : RFS1001
NO
Resolder or change
Check C1000 : About 0dBm ?
C1000, L1001, C1055, C1048
YES
NO
Check component soldering status OK at Resolder or change
F1000? F1000
YES
NO
Resolder or change
Check L1059, LC1084 : About 0dBm ?
L1059, C1075, C1070, C1043, C1084
YES
NO
Check component soldering status OK at Resolder or change
Check U1044? U1044
YES
NO
Check component soldering status OK at Resolder or change
Check U1021 ? U1021
YES
NO
Receiver is O.K? Resolder or change
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Check status OK at NO
Change
Caxial Cable(White) and mechanical Caxial Cable(White)
material
YES
NO Resolder or change
Check C1038(SUB PBA) : About 0dBm ? SUB PBA : ANT1000, 1003, 1007,
C1012, L1031, L1032
MAIN PBA : RFS1001
YES
YES
NO
Check component soldering status OK at Resolder or change
U1000? U1000, L1002
YES
NO
Resolder or change
Check C1165, L1004 : About 0dBm ? C1165, L1009, C1062, L1004
YES
NO Resolder or change
Check C1166 : About 0dBm ? C1166, L1051, C1059, U1031,
U1029, C1056
YES
NO
Check component soldering status OK at Resolder or change
U1021 U1021
YES
NO
Resolder or change
Check L1028 : About 0dBm ?
L1028
YES
NO
Resolder or change
Receiver is O.K?
U2010
YES
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-35. BT/WIFI
Yes
No
No
Check BT or WIFI fuction ON Enable BT or WIFI function.
Yes
No
No
1. Resolder or Replace ANT3002
Check the status of ANT3002 2. Replace REAR
Yes
No
No Resolder or Replace of
Check the Status of C3030,L3008,C3026,C3027
C3030,L3008,C3026,C3027 U3000,L3000,C3015
U3000,L3000,C3015
Yes
No
No Check AP PMIC(U5000)
Check the voltage on
C3043,C3044=3.3V (short, open, crack, etc.)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-36. GPS
Yes
No
No
Check GPS function ON Enable GPS Function in the setting.
Yes
No
No
Check the Antenna connect 1. Resolder or Replace ANT3003
ANT3003 2. Replace REAR
Yes
No
Check(crack,open,etc)
No
C3067,C3021,C3020,C3037, Resolder or change the wrong element
C3029,C3034,C3025,L3016,L3012, (open, crack, deviation, etc)
L3013,L3006,L3011
Yes
No
No Check OSC5000
Check 26MHz Clock at output
of OSC5000 (short, open, crack, etc.)
Yes
No
No Check AP PMIC(U5000)
Check the voltage on
C3045,L3010=1.8V (short, open, crack, etc.)
Yes
No
Resolder or change U3005
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-37. NFC
Yes
No
Check NFC function ON Enable NFC Function in the setting.
Yes
No
Check the Antenna contact 1. Resolder or Replace the ANT3004,ANT3005
2. Replace REAR
ANT3004,ANT3005
Yes
No
Check(crack,open,etc)
C3003,C3004,C3005,C3006,C3018, Resolder or change the wrong element
C3019,C3024,R3000,R3001,L3004,L3007 (open, crack, deviation, etc)
Yes
No
Check U3011 Replace the U3011
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.