All manuals and user guides at all-guides.

com

B102 plus

m
5.960-297 01/02
.co
es
uid
-g
all
 All manuals and user guides at all-guides.com

THANK YOU FOR PURCHASING A KARCHER

PRESSURE WASHER

PLEASE READ THIS LEAFLET CAREFULLY

BEFORE OPERATING YOUR MACHINE.

WHAT IS A PRESSURE WASHER?

A Pressure Washer is essentially a powerful electric motor driving a set
of pistons that force water through a small nozzle, thus creating a
pressurised jet of water. This provides the cleaning power behind the
Karcher Pressure Washer.

A Karcher Pressure Washer can be used for an endless list of applications

around the home and garden. It provides an efficient, economical and
labour saving way of cleaning with excellent results.

All Karcher domestic pressure washers are designed to run from a

suitable cold water supply although some models will accept a water inlet
temperature of between 40 °C and 60 °C.

Environmental Comment - Save water with high pressure.

The Karcher Pressure Washer is environmentally friendly enabling you
to reduce your water consumption compared to a normal garden hose.
A definite advantage with a metered water supply

OR
with the added benefit of suction mode, water can be drawn from an
open container such as a water butt.

2
 All manuals and user guides at all-guides.com

INDEX

1. APPLICATIONS

2. SAFETY INSTRUCTIONS

3. GETTING STARTED
3.1 Contents
3.2 Water Connection
3.3 Electrical Connection
3.4 Suction Mode
3.5 Detergent

4. OPERATING YOUR PRESSURE WASHER

4.1 High Pressure Operation
4.2 Low Pressure Operation Without Brush
4.3 Low Pressure Operation With Brush
4.4 End Of Operation

5. IMPORTANT – CARE AND MAINTENANCE

6. ACCESSORIES / SPARE PARTS

7. PROBLEM CHECKLIST / TROUBLESHOOTING

8. HELP-LINE

9. TECHNICAL DATA

10. ASSEMBLY

3
 All manuals and user guides at all-guides.com

1. APPLICATIONS
The main applications for this product are DOMESTIC
cleaning tasks:

• Cars, motorbikes, caravans, boats and bicycles

• Patio’s, fences, garden walls, pathways, driveways and house

facades – particularly useful for cleaning block driveways

• Removal of algae and moss from roofs, brickwork and

guttering

• Garden tools and machinery, furniture and barbecues

• Hygienic cleaning of animal pens and their surroundings

With the addition of Karcher accessories, the list

continues .............

• Clearing blocked drains and pipes

• Removal of old paint and rust from garden furniture and gates

• Spraying insecticide onto trees, plants and lawns

4
 All manuals and user guides at all-guides.com

2. SAFETY INSTRUCTIONS
BEFORE STARTING UP YOUR PRESSURE WASHER PLEASE
CHECK YOU HAVE THE FOLLOWING:

We recommend you purchase these items from a reputable store

• RCD plug and socket that will interrupt electrical supply in an

emergency

• A typical garden hose (minimum length 7.5 metres) with suitable

hose connection (Hoselock/Gardena type) to match the coupling
on the machine (hose and connector not supplied).

• The mains voltage and supply indicated on the Rating Plate of the
machine corresponds with that of the power source

• The insulation of the supply cable is not damaged

• Only earthed sockets should be used

• If you are using an extension cable it must be completely unwound

from the cable drum and be the correct diameter:

10 meter length of cable should have a cross section of 1.5 mm²

30 meter length of cable should have a cross section of 2.5 mm²

Safety Assurance
As an added precaution, your pressure washer is fitted with a safety
locking device on the Spray Gun.

AFTER USE, ALWAYS REMOVE THE PLUG FROM THE SOCKET

BEFORE CLEANING YOUR PRESSURE WASHER.

5
 All manuals and user guides at all-guides.com

3. GETTING STARTED
3.1 Contents
Upon opening the carton, if you do not have all the items as detailed
please contact the Customer Helpline.

m
.co
es Assembly see Page 19
uid

Assembly see Page 19

-g
all

1 Carry Handle 8 High Pressure Hose

2 On/Off Switch 9 Safety Lock Device
3 High Pressure Outlet 10 Spray Gun with Built-in
4 Inlet Water Connection (with Strainer) Low Pressure Jet
5 Hosepipe Connector 11 Mains Electric Lead with Plug
6 High Pressure Lance 12 Detergent Bottle
7 Dirtblaster Lance 13 Detergent Suction Tube

6
 All manuals and user guides at all-guides.com

Please follow these instructions carefully for

troublefree cleaning
Use the diagram on Page 6 for reference purposes

3.2 Water Connection

• The minimum length of supply hosepipe advised for maximum user
convenience is 7.5 metres with a diameter of 12.5 mm (1/2") to avoid
backpressure and any associated potential damage to your machine.

• Attach your supply hosepipe with its connector to the coupling on the
machine (No. 6) and the other end should be connected to a suitable
water supply

3.3 Electrical Connection

• Ensure the Power Switch (No.2) is in the “OFF” position before
connecting the factory fitted Plug attached to the Mains Electric Lead
(No.11) into an earthed socket.

If using an Extension Cable make sure it is completely unwound

from the cable drum and is the correct diameter.

7
 All manuals and user guides at all-guides.com

3.4 Detergent
Only cleaning agents recommended by Karcher (UK) Ltd.
should be used. Unsuitable detergents could damage your
Pressure Washer and the object being cleaned.

Recommended Detergents

1. The following cleaning agent may be used undiluted:

(But further dilution is practical but trial before application)
Universal Cleaner .............................. Profi RM 555 ASF

2. The following cleaning agents are available as concentrate

and must be diluted with 9 parts of water (1 : 9) before use:
Universal Cleaner .............................. Profi RM 555 ULTRA
Automotive Cleaner ........................... Profi RM 565 ULTRA
House & Garden Cleaner .................. Profi RM 570 ULTRA
Boat Cleaner ..................................... Profi RM 575 ULTRA

3. Detergent tablets are also available from some stores

Karcher Clean Tabs (10 tablets per box)
10 Tablets dissolved in clean water provide 5 litres of cleaning
detergent.

DETAILS OF THE FULL RANGE OF DETERGENTS AND

CHEMICALS ARE AVAILABLE BY CALLING THE KARCHER
CUSTOMER HELPLINE ON 0906 6800632

8
 All manuals and user guides at all-guides.com

4. OPERATING YOUR PRESSURE WASHER

If you have followed all the instructions so far, you are
now ready to have fun cleaning the KARCHER way!!!

• Turn on the supply water and press the Spray Gun lever (No.10) until
the water flows freely and removes all air locks from the hoses

• You may now attach the High Pressure Lance (No.6) or required
accessory to the Spray Gun

All accessories are bayonet fit, simply push in and twist

until they click into position !

• Once water is flowing through the machine, you may now switch
on your Karcher Pressure Washer using the Power Switch (No.2)

WHEN USING YOUR KARCHER PRESSURE WASHER ON

THE HIGH PRESSURE SETTING, THE RECOMMENDED
WORKING DISTANCE BETWEEN THE NOZZLE AND THE
OBJECT OR SURFACE TO BE CLEANED IS 30 CM.

IT CAN BE CLOSER IF REQUIRED FOR PATIOS OR MASONERY

It is your responsibility to check the suitability of the surface to be cleaned.

Karcher (UK) Ltd. cannot be held responsible for any damaged caused.

9
 All manuals and user guides at all-guides.com

4.1 High Pressure Operation

• Ensure the High Pressure Lance (No.6) is attached securely to the
Spray Gun (No.10).
• Aim the lance towards the object to be cleaned making sure the
recommended working distance is used for reference (See Page 9).
Release the Safety Lock Device (No.9) and squeeze the lever.
• Switch on the pressure washer (No.2)
Dirtblaster Lance (No.7)
A rapidly rotating pencil jet achieves a very high impact pressure so
that it has a very good cleaning effect. Use it to remove loose paint,
stubborn algae and moss from hard surfaces.

The pressurised water jet alone is capable of fulfilling most

cleaning tasks around the garden or on building work but
detergent and wash brush are advantageous when cleaning
vehicles or other paint finishes.

4.2 Low Pressure Operation

• Fill the Detergent Tank (No.12) with the selected detergent,
ensuring it is the correct concentration (See Page 8 or read
recommended dosage on label)
or
Dilute the detergent to the required concentration before filling the
Detergent Tank. (The correct dilution is dependent on the degree of
soiling of surface and is best determined by experience).
• Use the Spray Gun (10) without Spray Lance.
• Aim the Spray Gun towards the object to be cleaned, release the
Safety Lock Device (No.9) on the Spray Gun and squeeze the lever
to apply the detergent to the working area.
• Switch on the pressure washer (No.2)
• To rinse the detergent away, close the Spray Gun, attach the High
Pressure Lance (No.6). No detergent can be drawn in with a high
working pressure. Spray with the high pressure jet until no trace of
detergent can be found.

10
 All manuals and user guides at all-guides.com

4.3 Low Pressure Operation with Brush (not included)

When cleaning surfaces with a grease contamination - typically car
paintwork that always has a greasy traffic film covering. Follow the
procedure of:

• Washing loose dirt away with the clean water high pressure spray.
• Apply the detergent in low pressure mode by removing the bayonet fit
spray lance and fitting the Washing Brush (Part No. 6.903-275) to the

m
Spray Gun.
• Leave for 2-4 minutes for the detergent to have maximum effect.

.co
• With or without the pressure washer switched on, brush down the
surface being cleaned, this physical agitation removes all trace of
traffic film.
• Finally revert to the high pressure operation with the Spray Lance and
es
complete the wash down.

We recommend the following cleaning method:

uid

Step 1:
Remove loose dirt by washing over the surface to be cleaned with the
high pressure jet.
Step 2:
Spray on the detergent and leave for 1-4 minutes, so assisting the easy
-g

removal of fine dirt and associated greasy adhesions.

Step 3:
Finally, spray off the loosened dirt with the high pressure spray.
all

11
 All manuals and user guides at all-guides.com

4.4 End Of Operation

ALWAYS REMEMBER TO RINSE YOUR PRESSURE WASHER
AFTER USING DETERGENT BY FILLING THE DETERGENT
CONTAINER WITH CLEAN WATER AND RUN THE PUMP FOR
APPROXIMATELY ONE MINUTE

In the event of a break of 5 minutes in the operation of your

Karcher Pressure Washer, always switch off the pump to avoid
damage due to overheating.

• Switch off the pressure washer by the Power Switch (No.2) and
unplug the Mains Electric Lead (No.11) from the socket.
• Close the water inlet (tap) and disconnect the hosepipe.
• Squeeze the lever to remove all pressure from the machine.
Release the lever and then secure the lever with the Safety
Catch to prevent accidental opening.

5. IMPORTANT – CARE AND MAINTENANCE

To ensure prolonged life and trouble-free use of your
Karcher Pressure Washer we strongly recommend
that you always adopt the following procedures:
Water
• Before use, always check the inlet filter for dirt or debris.
• Visually check to see if the nozzle is blocked by dirt or grit, if so, re-
move the dirt from the nozzle hole with a needle and rinse with water
from the front.
Failure to do this will seriously damage your machine and invali-
date the warranty.

12
 All manuals and user guides at all-guides.com

• Connect the water supply hose and, without the lance attached,
squeeze the trigger gun to run water through your pressure washer
until the water flow is constant. Then plug in to the electric supply.
• Unless drawing water from an open water source such as a water
butt, always have a minimum of 10 metres (25 feet) of uncoiled hose
between the water tap and your machine. The internal diameter of the
feed water hose should be 12 mm (1/2”).
• Water Regulations require the use of a back-flow preventer valve at
the tap end of the supply hose.
Only use a full flow connector to connect the hose to the machine.

Electricity
• If using an electrical extension lead it must be rated at a minimum of
13 amps.
• Always fully uncoil any extension lead when used.

Chemicals
Use of chemicals other than those recommended by Karcher could
cause significant damage which may not be covered by your warranty.
• After using chemicals, always run fresh water through your machine.
• The high pressure hose of your Karcher Pressure Washer should not
be mistreated. It is designed to withstand high pressure operation so
vehicles should NOT run over it, nor should it be pulled across sharp
or abrasive edges. These actions may weaken the hose and cause
ballooning.

IMPORTANT
REMEMBER FROST WILL DAMAGE YOUR KARCHER
PRESSURE WASHER IF IT HAS NOT BEEN COMPLETELY
EMPTIED OF WATER AFTER USE. ALWAYS STORE IN A
FROST FREE AREA.

13
 All manuals and user guides at all-guides.com

6. ACCESSORIES
A wide range of popular accessories are available from your
local store selling Karcher Pressure Washers.

4.763-228 Dirt Blaster/Rotary Jet

A rapidly rotating pencil jet used to remove loose paint, stubborn algae and moss from hard surfaces.
4.760-269 Triple Nozzle Lance
An integral fan jet, pencil jet and low pressure chemical jet in one unit allows optimal nozzle selection.
4.760-212 Underbody Lance
Extended lance with angled end and upward firing jet for cleaning under cars, gutters etc.
6.903-276 Car Wash Brush
Simple bayonet fitting attaches the brush to the hand gun, used in conjunction with RM555.
4.762-065 Rotary Wash Brush
Ideal for car bodywork and windows as the water forces the brush to rotate enhancing cleaning power.
4.760-262 Extension Lance
To add length to the standard lance.
2.637-729 Drain Kit (7.5 m Hose)
2.637-767 Drain Kit (15 m Hose)
A flexible hose with backwards firing high pressure jet to create turbulence and dislodge blockages.
2.637-728 Sandblaster
Used to remove paint, rust and cement from metallic and stone surfaces by using a combination of high pres-
sure water and sand.
4.760-265 Flexi Lance
A lance which can be angled to any degree to clean hard to reach areas such as wheel arches etc.
2.637-755 Floor Cleaning Lance
An extended lance fitted with three shrouded high pressure nozzles to provide a wide area of cleaning power
without any splash back.
4.440-238 Suction Hose and Filter
Used to provide a water supply to the unit where a mains water supply is not available by placing the kit into a water butt.
6.541-040 Trolley
Eliminates the need to carry the pressure washer when the unit has no built in mobility.
6.964-006 Foam Nozzle
A bayonet fit accessory that generates a low pressure detergent foam. This allows longer detergent contact time
on the surface to be cleaned.
2.637-214 Water Pump Kit
9.300-051 25 Kg Grit
6.291-080 RM 555 (5 litre)
6.291-079 RM 555 (6 x 1 litre)

14
 All manuals and user guides at all-guides.com

6. SPARE PARTS
In the event that your Karcher Pressure Washer requires replacement
parts – please refer to the diagram below AND identify the particular
model of your machine by reference to the data plate on the underside.
Please write, email or fax Karcher (see page 17) with any parts order
you wish to place. A premium rate Help-line Number is available for
telephone enquires of any type.

15
 All manuals and user guides at all-guides.com

7. PROBLEM CHECKLIST
The machine you have chosen is of the highest quality. Correctly stored
away from frost it should operate without problems. If a problem does
arise, please check the following chart as a solution may be at hand.

PROBLEM POSSIBLE CAUSE CORRECTION

Machine refuses Plug not connected Connect plug

m
to start Defective socket Try another socket
Fuse blown Change the fuse
Defective extension cable Try without extension cable
Wrong mains voltage Check mains voltage corresponds to

.co
specifications of machin
Pump stops Fuse blown Change fuse and check size of extension
cable
Overheating due to poor Check inlet water flow rate - hose should
water Supply fill a 10 litre bucket in one minute
es
Strong pressure Nozzle partly blocked Clean dirt from nozzle hole with needle
fluctuations and rinse from the front
Machine does not Nozzle blocked/worn out Clean/replace nozzle
reach operating Inadequate mains water Check inlet water flow rate
uid

pressure Inlet hose squeezed Straighten out hose

Water filter clogged Clean filter
(3.1 item 5)
Inlet hose blocked Check hose for leaks or blockages
No detergent Wrong pressure Use Spray Gun without Spray Lance
-g

suction Blocked Detergent Filter Unblock Filter

all

In the unlikely event that you need to return your machine to your supplier,
please ensure that this is returned, complete with hose, gun and all
accessories.

16
 All manuals and user guides at all-guides.com

8. HELP - LINE
Karcher (UK) Limited operate a help-line allowing customers to discuss
any problems experienced with our products.
The help-line operates during normal business hours, if you have diffi-
culty getting through, please understand that there are peak periods
during the day when our consultants are unable to take all calls coming
in. In these circumstances we would ask that you try to contact us again
later in the day.
The help-line number is 0906 6800632.
It helps us if you have the model number and data plate details to
hand before making your call as there are very many different models of
Karcher Pressure Washers in use.
Alternatively you may write or e-mail to the address below:

Karcher (UK) Limited

Karcher House
Beaumont Road
Banbury
Oxon, OX16 1TB
FAX: 01295 752030
E-mail: [email protected]

17
 All manuals and user guides at all-guides.com

9. TECHNICAL DATA
Power Connection
Voltage ..................................................... 220-240 V -AC
Current ...................................................... 1~50/60 Hz
Connected/Load ............................................... 1.6 KW
Mains Fuse ........................................................ 13 AMP
Water Connection
Supply Temperature (Max) ................................ 40 °C
Supply Rate (Min) ............................................ 600 Litres per Hour
Supply Pressure (Max) ...................................... 12 bar
Supply Hose Length ......................................... 7.5 metres
Diameter ...................................... 1/2 inch
Performance Data
Max. Pressure ................................................. 100 bar
Rated Pressure .................................................. 90 bar
Flow Rate......................................................... 360 litres per hour
Detergent Intake ................................................ 25 litres per hour
Recoil Force of Hand Held Spray Gun
at Operating Pressure (Max) ............................. 12 N
Optimum Working Distance on High Pressure .. 30 cm
Unit vibrations ................................................... 0.8 m/s²
Noise LPA (EN 60704-1) .................................... 76 dB(A)
LWA (EN ISO 4871) .................................. 92 dB(A)
Dimensions
Length .............................................................. 430 mm
Width ............................................................... 145 mm
Height .............................................................. 240 mm
Weight .............................................................. 4.3 Kg
Circuit Diagram
M1 Motor
Q1 Appliance switch
S1 Pressure-operated switch
Z1 Suppressor

18
 All manuals and user guides at all-guides.com

10. ASSEMBLY
High Pressure Hose (No.8) and Spray Gun (No.10)

Detergent Bottle (No.12)

19
 All manuals and user guides at all-guides.com

EU Declaration of Conformity

We hereby declare that the equipment described below conforms to the relevant
fundamental safety and health requirements of the appropriate EU Directives, both
in its basic design and construction as well as in the version marketed by us. This
declaration will cease to be valid if any modifications are made to the machine
without our express approval.

Product: High-pressure cleaner

Model: 1.223-xxx

Relevant EU Directives:
EU Machinery Directive (98/37/EEC)
EU Low-Voltage Equipment Directive (73/23/EEC) amended by 93/68/EEC
EU Directive on Electromagnetic Compatibility (89/336/EEC)
amended by 91/263/EEC, 92/31/EEC, 93/68/EEC

Harmonised standards applied:

DIN EN 55014-1:1999 DIN EN 60335-1 DIN EN 61000-3-2:1995
DIN EN 55014-2:1997 DIN EN 60335-2-79 DIN EN 61000-3-3:2001
Appropriate internal measures have been taken to ensure that series-production
units conform at all times to the requirements of current EU Directives and relevant
standards. The signatories are empowered to represent and act on behalf of the
company management.

Alfred Kärcher GmbH & Co.

Cleaning Systems
Alfred-Kärcher-Str. 28–40
P.O. Box 160
D-71349 Winnenden
Tel.: ++ 49 71 95 14-0 Dr. B. Graf S. Reiser H. Jenner
Fax: ++ 49 71 95 22 12

Alfred Kärcher Kommanditgesellschaft. Sitz Winnenden. Registergericht: Waiblingen, HRA 169.

Persönlich haftende Gesellschafterin: Kärcher Reinigungstechnik GmbH. Sitz Winnenden, 2404 Registergericht Waiblingen, HRB
Geschäftsführer: Dr. Bernhard Graf, Hartmut Jenner, Herbert Konhäusner, Georg Metz, Thomas Schöbinger
5.957-422 05/01