Scribd
Upload
194 views

Asme Sec-II Part-D Data

The document lists the mechanical properties of various stainless steel alloys, structural steel, and mild steel, including minimum tensile strength, minimum yield strength, maximum allowable stress at 150°C, modulus of elasticity at 150°C, Poisson's ratio, and mean thermal expansion at 150°C. Properties are shown for different material geometries such as forgings, seamless pipes, seamless tubes, and plates. Stainless steels include types 304, 304L, and 316 in various product forms. Structural steel is grade IS 2062 and mild steel is grade SA-516.

Uploaded by

Sandip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
194 views

Asme Sec-II Part-D Data

The document lists the mechanical properties of various stainless steel alloys, structural steel, and mild steel, including minimum tensile strength, minimum yield strength, maximum allowable stress at 150°C, modulus of elasticity at 150°C, Poisson's ratio, and mean thermal expansion at 150°C. Properties are shown for different material geometries such as forgings, seamless pipes, seamless tubes, and plates. Stainless steels include types 304, 304L, and 316 in various product forms. Structural steel is grade IS 2062 and mild steel is grade SA-516.

Uploaded by

Sandip
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

MECHANICAL PROPERTIES

MOC SS 304 SS 304L SS 316


GEOMETRY FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE
MIN TENSILE STRENGTH (MPa) 485 485 515 515 515 450 485 485 485 485 485 515 515 515 515
MIN YEILD STRENGTH (MPa) 205 205 205 205 205 170 170 170 170 170 205 205 205 205 205
MAX ALLOWABLE STRESS AT 1500C-MIN (MPa) 103 103 103 103 103 107 107 107 107 107 107 107 107 107 107
S
IE
ER
MAX ALLOWABLE STRESS AT 1500C -MAX (MPa) 130 130 130 130 130 115 115 115 115 115 138 138 138 138 138
OP
PR

MODULUS OF ELASTICITY AT 1500C (MPa) 186 X 10^3 186 X 10^3 186 X 10^3
POISSIONS RATIO 0.31 0.31 0.31
MEAN THERMAL EXPANSSION AT 1500C ( / 0C) 16.6 X 10^(-6) 16.6 X 10^(-6) 16.6 X 10^(-6)

MOC SS316 L STRUCTURAL STEEL (IS 2062) MS (SA-516)


GEOMETRY FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE FORGING SMLS PIPE SMLS TUBE PLATE WLD TUBE
MIN TENSILE STRENGTH (MPa) 450 485 485 485 485 - - - 410 - - - - 380 -
MIN YEILD STRENGTH (MPa) 170 170 170 170 170 - - - 240 - - - - 205 -
MAX ALLOWABLE STRESS AT 1500C-MIN (MPa) 87.4 87.4 87.4 87.4 87.4 - - - 117 - - - - 108 -
S
IE
ER

MAX ALLOWABLE STRESS AT 1500C -MAX (MPa) 115 115 115 115 115 - - - 117 - - - - 108 -
OP
PR

MODULUS OF ELASTICITY AT 1500C (MPa) 186 X 10^3 195 X 10^3 195 X 10^3
POISSIONS RATIO 0.31 0.3 0.3
MEAN THERMAL EXPANSSION AT 1500C ( / 0C) 16.6 X 10^(-6) 12.4 X 10^(-6) 12.4 X 10^(-6)

You might also like