Scribd
Upload
412 views

What Are The Protocol Hierarchies in Computer Networks

A protocol is a set of rules that defines how communicating entities exchange data. It specifies the syntax, semantics, and timings of data transmission. The Internet uses the TCP/IP protocol suite, with TCP and IP being the main protocols that define communication. Protocols are organized in layers, with each layer offering services to higher layers while shielding them from implementation details. Common network models use five layers, with each layer communicating with its peer layer on other machines using a specific protocol. Data is passed down from higher to lower layers until reaching the physical transmission medium.

Uploaded by

atina tehreem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
412 views

What Are The Protocol Hierarchies in Computer Networks

A protocol is a set of rules that defines how communicating entities exchange data. It specifies the syntax, semantics, and timings of data transmission. The Internet uses the TCP/IP protocol suite, with TCP and IP being the main protocols that define communication. Protocols are organized in layers, with each layer offering services to higher layers while shielding them from implementation details. Common network models use five layers, with each layer communicating with its peer layer on other machines using a specific protocol. Data is passed down from higher to lower layers until reaching the physical transmission medium.

Uploaded by

atina tehreem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

A protocol is nothing but a set of rules which are followed by the communicating entities for

data communication.

The protocol depends on the following −


Syntax − Syntax is the format of data which is to be sent or received.

Semantics − Semantics is the meaning of every section of bits that are transferred.

Timings − It refers to the time at which data is transferred as well as the speed at which it
is transferred.

The communication between the computers in the Internet is defined by different protocols.
The protocols TCP (Transmission Control Protocol) and IP (Internet Protocol) build on the
basis of the communication in the Internet. The combination of the TCP and the IP protocol is
called the TCP/IP protocol which represents the standard system used in most large networks.

Before discussing every protocol in hierarchy, let us illustrate the position of each protocol
relative to the others in the protocol hierarchy.

Protocol Hierarchies
A protocol is a standard which controls or enables the connection, communication, and data
transfer between computing endpoints. Protocols can be implemented by hardware, software,
or a combination of the two.

Generally to reduce the complexity of network software design , most networks are organized
as a series of "layers" or "levels”. The different number of layers, the name of each layer, and
the function of every layer differ from network to network.

The purpose of every layer is to offer a certain service to the higher layers, shielding those
layers from the details of how the offered services are actually implemented.
Layer n in one machine carries on a conversation with layer n on another machine, the rules
and conventions used in this conversation are collectively known as layer n "protocol".

Protocol is an agreement between the communication parties and how communication is to


proceed.

Structure of Five Layer Protocol


The structure of five layer protocol is as follows −

Setp 1 − Generally the entities present on different layers are called peers who are
present on different machines.
Setp 2 − There is no data transferred directly from layer n on one machine to layer n on
another machine.

Setp 3 − Each layer passes data and control information to the layer below it, until the
lowest layer is reached.

Setp 4 − Below layer 1 there is a "physical medium" through which the actual
communication occurs.

Setp 5 − In the above figure the virtual communication is shown by dotted lines and
physical communication by solid line.

Setp 6 − Between each pair of adjacent layers there is an "interface", the interface defines
which operations and services that the lower layer offers to the upper layer through it.
Setp 7 − A list of protocols used by system one protocol per layer is called a "protocol
stack".

Now, consider how to provide communication to the top layer of five-layer network in below
figure −
Here,

A massage M is produced by an application process running in layer 5.and given to layer 4


for transmission.

Layer 4 puts a " header " in front of massage M to identify the massage and passes the
result to layer 3.

In many networks, there is no limit to the size of massage in layer 4-protocol, but there is
nearly always a limit imposed by layer 3 protocol.

Hence, layer 3 must break up the incoming message into small units (packets) prepending
layer 3 header to each packet.

In this example the message M is split into two parts, M1, and M2.

Layer 3 decides which of outgoing lines to use and passes the packet to layer 2.

Layer 2 adds a header and trailer to each packet and gives the result to layer 1 for
physical transmission.

At the receiving machine, the message moves up word from layer to layer with the header
being stripped off as it progresses till the message m arrives at application layer 5.

You might also like