Scribd
Upload
53 views3 pages

Product CI854A

CI854 modulo maestro

Uploaded by

victor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views3 pages

Product CI854A

CI854 modulo maestro

Uploaded by

victor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

—

DATA SHEET

CI854A Classic
System 800xA hardware selector

PROFIBUS DP is a high speed multipurpose bus protocol (up to


12Mbit/s) for interconnecting field devices, like remote I/O, drives,
low voltage electrical equipment, and controllers. PROFIBUS DP can
be connected to the AC 800M via the CI854A communication
interface. The Classic CI854A includes two PROFIBUS ports to realize
line redundancy and it also supports PROFIBUS master redundancy.
The CI854B is the new PROFIBUS-DP master that replaces CI854A in
new installations.
Master redundancy is supported in PROFIBUS-DP communication by
using two CI854A communication interface modules. The master
redundancy can be combined with CPU redundancy and CEXbus
redundancy (BC810). The modules are mounted on a DIN rail and
interface directly with the S800 I/O system, and other I/O systems as
well, including all PROFIBUS DP/DP-V1 and FOUNDATION Fieldbus
proficient systems.
The PROFIBUS DP must be terminated at the two outermost nodes.
This is usually done by using connectors with built-in termination. To
guarantee a correct working termination the connector has to be
plugged and power supplied.

Features and benefits


Used for connecting remote I/O and fieldbus instruments via PROFIBUS DP
Possible to connect PROFIBUS PA to the CI854A/ CI854B via the PROFIBUS linking device LD 800P
The CI854A and newer CI854B can be set redundant

General info
Protocol PROFIBUS DP-V1
Article number 3BSE030220R1 (CI854AK01)
Life cycle status Classic
Master or slave Master
Number of channels 2
Transmission speed 9.6 - 12 000 kbit/s
Line redundancy Yes
Module redundancy Yes
Hot Swap Yes
Used together with HI Controller Yes

Detailed data
Max units on CEX bus 12
Connector DB female (9-pin)
24 V consumption typ. 190 mA

DATA SHEET CI854A Classic | 2021-07-16 | Copyright © 2021 ABB 1


Environment and certification
Temperature, Operating +5 to +55 °C (+41 to +131 °F)
Temperature, Storage -40 to +70 °C (-40 to +158 °F)
Relative humidity 5 to 95 %, non-condensing
Protection class IP20 according to EN60529, IEC 529
CE- marking Yes
Marine certificates BV, DNV-GL, LR, RS, CCS
RoHS compliance -
WEEE compliance DIRECTIVE/2012/19/EU

Dimensions
Height 185 mm (7.3 in.)
Width 59 mm (2.3 in.)
Depth 127.5 mm (5.0 in.)
Weight (including base) 700 g (1.5 lbs)

2 DATA SHEET CI854A Classic | 2021-07-16 | Copyright © 2021 ABB


— —
solutions.abb/800xA 800xA is a registered or pending We reserve all rights to this
solutions.abb/controlsystems trademark of ABB. All rights to other document and the items and images
trademarks reside with their it contains. The reproduction,
respective owners. disclosure to third parties or the use
of the content of this document –
We reserve the right to make including parts thereof – are
technical changes to the products or prohibited without ABB’s prior
modify the contents of this written permission.
document without prior notice. With
regard to purchase orders, the Copyright© 2021 ABB All rights
agreed particulars shall prevail. ABB reserved
does not assume any responsibility
for any errors or incomplete
information in this document.

DATA SHEET | 2021-07-16 | Copyright © 2021 ABB 3

You might also like