T-101 Drilling Machine

Sizes: 1/2- to 4-inches

Bulletin No: 2000.001.10
Version: 05.2015
Cross Indexing No: n/a
Supersedes: 2000.001.09 (11.2014)

1/2" through 4" (DN 15 - DN 100) taps without Typical Setup

shutdown. It can be used to install 2" and 3"
completion plugs in tapping nipples to permit
recovery of tapping valves and to install
TDW PIG-SIG® Scraper Passage Indicators.

Features

The Model T-101B Drilling Machine is available

in two versions*: the standard T-101B with 18" of
travel and the XL Model with 28" of travel.
The T-101B and T-101B-XL Drilling Machines
meet NACE Standard MR0175-93, sulfide stress
cracking resistant metalic material for oilfield
equipment. The maximum working pressure is Bleeder
1,480 psi (100 bar) at 100°F (38°C). Its operating Valve
temperatures are -20°F (-29°C) to 700°F (371°C)
at 700 psi (48 bar) for intermittent service.
The maximum continuous rating is 350°F (177°C)
at 1,025 psi (70 bar). Other features include: Threaded Valve
Adapter
Lightweight - 32 pounds (XL is 50 pounds)
Hole Saw
Versatile - 1/2” through 4” taps (or drill)
Operates to 1,480 psi (2,220 psi for 904
Model)

Valve
T-101 Drilling Machine Options
Model T-101B

T.D. Williamson, Inc., is committed to

providing you with the exact product to assist
you in planning, budgeting and meeting the
Description specifications for your individual application
needs. The following options are available:
Drilling machines are used to make The T-101 Drilling Machine is furnished
connections to pipelines, tanks and plant piping with a ratchet crank for manual operation.
without shutdown and are used to make hot taps An optional hose-connected, hand-held air
ISO 9001 Certified
in preparation for plugging machine applications. motor can be easily added.
* The 904 Drilling Machine is a higher pressure (balanced) version of the
The T-101 Drilling Machine is a manual T101B XL machine. It is rated at 2,220 psi (150 bar) at 180°F (82°C).
or power-driven machine which taps into pipe For special requirements, such as higher pressure or temperature,
while under pressure. It is used for making consult the factory.

North & South America: +1 918 447 5000 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / © Copyright 2015 All rights reserved. T.D. Williamson, Inc.
 Dimensions and Part Numbers

T-101 Drilling Machine Models T-101B and T-101B-XL 2000.001.10 - p2

Drilling Machine Item Wt./ Lb. Wt./Kg. Part Number

T-1O1B Drilling Machine 32 15 05-1028-0000
T-101B-XL Drilling Machine 50 22 05-1029-0000
Includes: Crank Handle 00-1188-0004
Cap 05-1028-0046
Bleeder Valve 00-0774-0001
Nipple 00-0220-0001
Packing Wrench 05-0184-0020
Optional Equipment:
Air Motor (Pistol Grip) 6 3 00-1508-0001
Air Motor (Right Angle) 8 4 05-2160-0000
The cap locks the feed
Drive Socket 00-1509-0004
and rotation of machine
to set and retrieve Steel Carrying Case (Std.) 15 7 05-2100-0000
completion plugs. Steel Carrying Case (XL) 20 9 05-2101-0000
Plug Holder for 2" THREAD-O-RING™ Plug 05-0185-0001
Plug Holder for 2" and 3" SHORTSTOPP® Completion Plug 08-2120-0000

Operating Specifications
Maximum Operating Pressure 1,480 psi (100 bar) @ 100°F (38°C)
Maximum Operating Temperature 700°F (371°C) @ 700 psi (48 bar)*

* For intermittent service only. Maximum continuous rating is 350°F (177°C) at 1,025 psi (70 bar).

Standard Model XL Model

Drilling Machine Specifications Item Inches mm Inches mm
Boring Bar Travel 18 457 28 711
Overall Length 46-5/16 1176 66-5/16 1684
Boring Bar Extension/Revolution 0.125 3.2 0.125 3.2
Feed Mechanism Hand-Fed Machine Hand-Fed Machine

Accessories for PIG-SIG® IV and V Installation Item Part Number

Drill for wall thickness more than 3/8" (9.5 mm) 05-0193-0001
Valve Adapter for Cutter or Drill - for use on 2" (50 mm) threaded valve 00-0706-0016
2" (50 mm) THREAD-O-RING Plug Holder for use with PIG-SIG IV 05-0185-0001
®
™

PIG-SIG V Plug Holder 00-8138-0000

®

2" (50 mm) ASME CIass 600 conventional valve with 2-1/16" (53 mm) through-bore is recommended for

use in making taps for PIG-SIG® Scraper Passage Indicator installation.

North & South America: +1 918 447 5000 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / © Copyright 2015 All rights reserved. T.D. Williamson, Inc.
 Dimensions and Part Numbers

T-101 Drilling Machine Models T-101B and T-101B-XL 2000.001.10 - p3

Drill Diameter Drill Length Valve Size

Drills Inches DN Inches mm Inches mm Part Number
1/2 12.7 6 150 1-1/4 - 2 32-50 05-0203-0005
1/2 12.7 22-1/4 565 1 25 05-0189-0001
3/4 19.0 6 150 1-1/4 - 2 32-50 05-0203-0009
3/4 19.0 22-1/4 565 1 25 05-0189-0002
1 25.0 6 150 1-1/4 - 2 32-50 05-0203-0012
1-1/4 32.0 6 150 1-1/2 - 2 40-50 05-0203-0013
1-7/16 36.5 7-3/8 187 1-1/2 - 2 40-50 05-0193-0001

Size-on-Size Non Size-on-Size

Tap Size Cutter Diameter Hole Saw/ Cutter Holder Pilot Holder Pilot
Hole Saws/Cutters and Holder Pilots Inches DN Inches mm Part No. Part No. Part No.
1-1/4 32 1-5/16 33.3 00-1151-0005 05-0634-0000 05-0290-0000 *
1-1/2 38 1-9/16 39.7 00-1151-0009 05-0275-0000 05-0290-0000
2 50 1-7/8 47.6 05-0179-0002 05-0204-0000 05-0207-0000
3 80 2-7/8 73.0 05-0179-0003 05-0204-0000 05-0207-0000
4 100 3-7/8 98.4 05-0179-0004 05-0205-0000 05-0228-0000
*Use 05-0634-0000 pilot for 1-1/4" hot tap on 1-1/2" (38 mm) pipe only.

Maximum Pressure
Threaded Valve Adapters Inches DN Part Number psi Bar
1 25 06-1223-0001 1480 100
1-1/4 32 00-0757-0012 1480 100
1-1/2 38 00-0757-0011 1480 100
2 50 00-0706-0015 1480 100
3 80 06-1303-0001-02 1480 100

Flanged Valve Adapters - ASME Class Inches DN Class 150 RF Class 300 RF Class 600 RF
2 50 06-1305-0015 06-1305-0030 06-1305-0060
3 80 06-1318-0015 06-1318-0030 06-1318-0060
4 100 06-1302-0015 06-1302-0030 06-1302-0060 *
6" SANDWICH ® Valve 150 06-8872-0001 06-8872-0002 06-8872-0003
6" Gate Valve 150 06-8684-0001 06-8685-0001 06-8872-0004

*For 4-inch taps with the T-101 this adapter must be used with TDW 4-inch SANDWICH® Valve to ensure sufficient boring bar travel to complete the tap.

Nominal Size Minimum Bore

Valve Dimensions for Making Taps Inches DN Inches mm
2 50 2-1/16 52.4
3 80 3-1/16 72.8
4 100 4-1/32 102.4

North & South America: +1 918 447 5000 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / © Copyright 2015 All rights reserved. T.D. Williamson, Inc.
 2000.001.10 - p4

North & South America: +1 918 447 5000 Europe / Africa / Middle East: +32 67 28 3611 Asia Pacific: +65 6364 8520 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / © Copyright 2015 All rights reserved. T.D. Williamson, Inc.
 904 Drilling Machine
Sizes: 1/2- to 4-inches Model 904B Bulletin No: 2000.003.01
Date: October 2004
Cross Indexing No: n/a
Supersedes: January 2004

Features
Typical Setup
The Model 904B Drilling Machine is available in
the XL Model with 28-inches of travel.
The 904B Drilling Machine meets NACE
Standard MR0175-2002, sulfide stress cracking
resistant metalic material for oilfield equipment.
The maximum working pressure is 2,220 psi (153
bar) at 100°F (38°C). Its operating temperatures
are -20°F (-29°C) to 180°F (82°C) for intermittent
service. The maximum continuous rating is 180°F
(82°C) at 1,025 psi (48 bar).
The 904B Drilling Machine is a high pressure
balanced machine. At this high pressure, it is
limited to a maximum of 4-inch (DN 100) taps. For
special requirements, such as higher pressure or
temperature, consult the factory.
Bleeder
Other features include: 2-inch 900# Valve
RTJ Flanged
Lightweight 85 pounds (39 kg) Valve Adapter
Versatile 1/2- through 4-inch taps
Operates to 2,220 psi
Threaded Valve
Adapter

Options Hole Saw

(or drill)
904 Drilling Machine
Model 904B T.D. Williamson, Inc. is committed to
providing you with the exact product to
assist you in planning, budgeting and Valve
meeting the specifications for your individual
application needs. The following options are
Description available:
The 904B Drilling Machine is
Drilling machines are used to make furnished with a ratchet crank for
connections to pipelines, tanks and plant piping manual operation. An optional hose-
without shutdown and are used to make hot taps connected, hand-held air motor can be
in preparation for plugging machine applications. easily added or a hand held hydraulic
drive option is available
The 904 Drilling Machine is a manual or
power-driven machine which taps into pipe
while under pressure. It is used for making 1/2-
through 4-inches (DN 15 - DN 100) taps without
ISO 9001 Certified
shutdown. It can be used to install 2-inch and
3-inch completion plugs in tapping nipples to
permit recovery of tapping valves and to install 5PMM
'SFF
TDW PIG-SIG Scraper Passage Indicators.
®
1-888-TDWmSon (839-6766)

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / © Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA
 Dimensions and Part Numbers

904 Drilling Machine Model 904B 2000.003.00- p2

Drilling Machine Item Wt./ Lb. Wt./Kg. Part Number

904B XL Drilling Machine 85 39 05-1046-0000
Includes: Ratchet Crank 00-1443-0001
Cap 05-1028-0046
Bleeder Valve 00-0774-0001
Nipple 00-0220-0001
Packing Wrench 05-0184-0020
Optional Equipment:
Air Motor 8 4 00-1508-0004
Hydraulic Drive (w/ 60’ Hoses) 30 14 05-1026-0000
Drive Socket 00-1509-0004
The cap locks the feed
Steel Carrying Case (XL) 20 9 05-2152-0000
and rotation of machine
to set and retrieve Plug Holder for 2” THREAD-O-RING™ Plug 05-0185-0001
®
completion plugs. Plug Holder for 2” and 3” SHORTSTOPP Completion Plug 08-2120-0000

Operating Specifications
Maximum Operating Pressure 2220 psi (153 bar) @ 100°F (38°C )
Maximum Operating Temperature 180°F (82°C) @ 700 psi (48 bar)

Standard Model (XL)

Drilling Machine Specifications Item Inches mm
Boring Bar Travel 28 711
Overall Length 70 3/4 1797
Boring Bar Extension/Revolution 0.125 3.2
Feed Mechanism Hand-Fed Machine
2-inch 900# Flange Standard
2-inch NPT Adapter Standard

Accessories for PIG-SIG® IV Installation Item Part Number

Drill for wall thickness more than 3/8” (9.5mm) 05-0193-0001
Valve Adapter for Cutter or Drill - for use on 2” (50 mm) threaded valve 00-0706-0016
2” (50 mm) THREAD-O-RING™ Plug Holder 05-0185-0001
2” (50 mm) ASME CIass 600 conventional valve with 2-1/16” (53mm) through-bore is recommended for use in making

PIG-SIG® IV Taps.

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / © Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA
 Dimensions and Part Numbers

904 Drilling Machine Models 904B 2000.003.00- p3

Drill Diameter Drill Length Valve Size

Drills Inches DN Inches mm Inches mm Part Number
1/2 12.7 6 150 1-1/4 - 2 32-50 05-0203-0005
1/2 12.7 22-1/4 565 1 25 05-0189-0001
3/4 19.0 6 150 1-1/4 - 2 32-50 05-0203-0009
3/4 19.0 22-1/4 565 1 25 05-0189-0002
1 25.0 6 150 1-1/4 - 2 32-50 05-0203-0012
1-1/4 32.0 6 150 1-1/2 - 2 40-50 05-0203-0013
1-7/16 36.5 7-3/8 187 1-1/2 - 2 40-50 05-0193-0001

Size-on-Size Not Size-on-Size

Tap Size Cutter Diameter Hole Saw/Cutter Holder Pilot Holder Pilot
Hole Saws/Cutters and Holder Pilots Inch DN Inch mm Part No. Part No. Part No.
1-1/4 32 1-5/16 33.3 00-1151-0005 05-1094-0000 05-1064-0000
1-1/2 38 1-9/16 39.7 00-1151-0009 05-0275-0000 05-0290-0000
2 50 1-7/8 47.6 05-0179-0002 05-0204-0000 05-0207-0000
3 80 2-7/8 73.0 05-0179-0003 05-0204-0000 05-0207-0000
4 100 3-7/8 98.4 05-0179-0004 05-0205-0000 05-0228-0000

Maximum Pressure
Threaded Valve Adapters Inches DN Part Number psi Bar
1 25 06-1223-0001 1480 100
1-1/4 32 00-0757-0012 1480 100
1-1/2 38 00-0757-0011 1480 100
2 50 00-0706-0015 1480 100
3 80 06-1303-0001-02 1480 100

Flanged Valve Adapters - ASME Class Inches DN Class 150 RF Class 300 RF Class 600 RF Class 900 RJT
2 50 06-1305-0015 06-1305-0030 06-1305-0060 Standard
3 80 06-1318-0015 06-1318-0030 06-1318-0060 -*
4 100 06-1302-0015 06-1302-0030 06-1302-0060 -*
*Consult Factory

Nominal Size Minimum Bore

Valve Dimensions for Making Taps Inches DN Inches mm
2 50 2-1/16 52.4
3 80 3-1/16 72.8
4 100 4-1/32 102.4

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com
Data subject to change without notice. / Dimensions not for construction unless certified. / ® Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / © Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA