TECHNICAL DATA SHEET

CTW-602

Base material Polyolefin.

Color Black, others

Typical Properties

Physical Value Standard Test Method

Shrink ratio 2:1
Tensile strength 17 N/mm2 min. - IEC 60684-2-19
Elongation at break 400 % min. - IEC 60684-2-19
Longitudinal change +0/ -5 % - IEC 60684-2-9
Concentricity 70 % min. - IEC 60684-2-3
Secant Modulus 100 N/mm2 - IEC 60684-2-37
Relative Density 1.05 g/cm³ - IEC 60684-2-4
Shore Hardness 93 Shore A ASTM D-2240

Thermal Value Standard Test Method

Continuous Operating Temperature -55°C to +105°C - UL 224
-55°C to +130°C IEC 60684-2-37
Shrink Temperature 120°C min. 280 °C max.
Heat Shock 200 oC / 4 hrs - IEC 60684-2-6
Tensile strength N/mm2 min. - IEC 60684-2-19
Elongation at break % min. - IEC 60684-2-19
Heat Ageing 150 oC / 168 hrs - IEC 60684-2-39
Elongation at break 350 % min. - IEC 60684-2-19
Low Temperature Flexibility No cracking after bending - IEC 60684-2-14
Copper Corrosion No corrosion - IEC 60684-2-33
Flammability Self extinguishing - IEC 60684-2-26

Electrical Value Standard Test Method

Dielectric Strength 200 kV/cm - IEC 60684-2-21
Volume resistivity 1*10 15 Ohm/cm - IEC 60684-2-23
Comparative Tracking Index Min. 600 V - IEC 60112

Chemical Value Standard Test Method

Chemical Resistance Good - IEC 60684-2-36

Environmental Value Standard Test Method

RoHS compliant Yes 2002/95/EEC N/a
Incl. Exemption
Oct. 13, 2005
EU 2005/717/EC
Decabromo diphenylether (PBDE) Free No N/a
Halogen free No BS 6853 N/a

Technical Information provided consists of typical product data and should not be used for specification purposes.
Unless otherwise specified in the test method, all tests are performed at room temperature.

Important note to the purchaser.

All statements, technical information and recommendations contained herein are based on tests 3M believes
to be reliable, but their accuracy and completeness are not guaranteed.
The user shall be responsible for determining the suitability of the products for his particular application.
To discuss your application requirements please contact your representative Issue date 13/4/2006
Replacing 13/9/2005
BDB2033 8801 10/01 Page 1 of 2
 TECHNICAL DATA SHEET
CTW-602

Documentation
o
UL-224 105 C 600 V, File E48398
IEC 60684-3-212

Product Guide - Table 1

Part Expanded ID Recovered ID Total Recovered

Number (min.) (max.) Recovered Adhesive Wall
Wall Thickness Thickness
(nominal) (nominal)
mm. mm. mm. mm.
1.2 1.2 0.6 0.4
1.6 1.6 0.8 0.4
2.4 2.4 1.2 0.5
3.2 3.2 1.6 0.5
4.8 4.8 2.4 0.5
6.4 6.4 3.2 0.6
9.5 9.5 4.7 0.6
12.7 12.7 6.4 0.6
19.0 19.0 9.5 0.8
25.4 25.4 12.7 0.9
38.0 38.0 19.0 1.0
51.0 51.0 25.4 1.1
76.2* 76.2 38.0 1.3
102.0* 102.0 51.0 1.4
* only available in black

Storage Conditions IMDS ID 2487519/4

Temperature: min. -50 oC

max. +50 oC

Moisture: max. 75 %

Important note to the purchaser.

All statements, technical information and recommendations contained herein are based on tests 3M believes
to be reliable, but their accuracy and completeness are not guaranteed.
The user shall be responsible for determining the suitability of the products for his particular application.
To discuss your application requirements please contact your representative Issue date 13/4/2006
Replacing 13/9/2005
BDB2033 8801 10/01 Page 2 of 2