Scribd
Upload
979 views4 pages

Goel TMT Physical Report-Signed

The document reports the results of tests conducted on high strength deformed steel bars of diameters 16mm and 20mm. The tests were conducted to determine the mechanical properties including yield stress, tensile stress and elongation percentage as per Indian standards. All samples of both diameters met the property requirements for Fe 500D grade as specified in IS 1786-2008 including the bend test. The bars can be used for the named construction project.

Uploaded by

sitaramap10 sathupally
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
979 views4 pages

Goel TMT Physical Report-Signed

The document reports the results of tests conducted on high strength deformed steel bars of diameters 16mm and 20mm. The tests were conducted to determine the mechanical properties including yield stress, tensile stress and elongation percentage as per Indian standards. All samples of both diameters met the property requirements for Fe 500D grade as specified in IS 1786-2008 including the bend test. The bars can be used for the named construction project.

Uploaded by

sitaramap10 sathupally
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Test Report on Mechanical Properties of High Strength Deformed Steel Bar

TRF No :- TMT/20mm/20220611/004 Date of Report :- 13-06-2022


Report Ref No :- MCS-HYD/2022-23/Reports/Lab/Steel/20mm/20220613004

:- SRLIP-Package-10 Sathupally Trunts Earth Work, Excavation, Forming embankment and providing CC Lining
including construction of CM&CD works structure on of sathupally main canal from km 23.700 near cherukupally (V)
sathupally (M) in Khammam District to km 42.775 near Gandugulapally (V) Dammapeta (M) in Bhadradri Kothagudem
Name of Work District Bethupally branch canal from 0/0 to 1.740 in Gandugulapally (V) Dammapeta (M) and Dammapeta branch
canal from 0/0 to near Gandugulapally (V) to km 13.450 near Apparaopeta (V) of Dammapeta (M) in Bhadradri
Kothagudem District. Ramanthapur Pedda Cheruvu to Ramanthapur Chinna Cheruvu b) Ramanthapur Chinna Cheruvu
to Irrigation Channel in L.B Nagar Zone of GHMC Under Package V (E) of Strategic Nala Development Programme.
Agency :- M/S Prasad & Co. (Pw) LTD AVR. MAX (JV)

Material Received :- High Strength Deformed Steel Bar/Reinforcement Steel Bar Method of Test :- I.S.1608-2018 P-1
Sample Mark :- GOEL TMT Test Started :- 11-06-2022
Grade of Steel :- Fe 500 D Test Completed :- 11-06-2022

A) High Strength Deformed Steel Bar test Result.


Cross Sectional Area Proof Stress 0.2% / Yield Tensile Stress Bend/Re-Bend
S.NO Bar Dia (mm) Mass in Kg/m Elongation %
(mm2) Stress (Mpa) (Mpa) Stress
1 20.0 2.424 314.16 576.0 664.00 17.60 A

2 20.0 2.428 314.16 588.7 668.00 17.90 A

3 20.0 2.421 314.16 589.1 659.00 17.10 A


IS:1599-1985 RA
Method of Test IS: 1786:2008 RA-2013 IS: 1608-2018 P-1
2006
Bend/Rebend Stresses Type of Class A= Satisfaction, Type of Class B= Unsatisfaction

Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)


Property Fe 415 Fe 415D Fe 500 Fe 500D Fe 550 Fe 550D Fe 600
0.2% Proof 415 415 500 500 550 550 600
Max.tensile Stress N/mm2,
Min/% more than actual Yield 485/10% 485/12% 545/8% 565/10% 585/6% 600/8% 660/6%
Stress
Min Elongation % 14.8 18 12 16 10 14.5 10
Bend Test:- There Shall not be any transverse crack/fracture in the bent portion.
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Diameter in mm 8 10 12 16 20 25 28 32
Mass per meter(kg) 0.395 0.617 0.888 1.580 2.470 3.850 4.830 6.310
Tolerances on Nominal -8% -6% -4%
**End of Report**
Note:-
1. The Results are given only for the samples submitted by the Client.
2. Manglam Consultancy Services is not responsible for any interpretation of test results.
3. Reports are not supposed to be used for publicity.
For Manglam Consultancy Services Hyderabad

Tested By Authorised Signatory


Test Report on Mechanical Properties of High Strength Deformed Steel Bar
TRF No :- TMT/16mm/20220611/003 Date of Report :- 13-06-2022
Report Ref No :- MCS-HYD/2022-23/Reports/Lab/Steel/16mm/20220613003

:- SRLIP-Package-10 Sathupally Trunts Earth Work, Excavation, Forming embankment and providing CC Lining
including construction of CM&CD works structure on of sathupally main canal from km 23.700 near cherukupally (V)
sathupally (M) in Khammam District to km 42.775 near Gandugulapally (V) Dammapeta (M) in Bhadradri Kothagudem
Name of Work District Bethupally branch canal from 0/0 to 1.740 in Gandugulapally (V) Dammapeta (M) and Dammapeta branch
canal from 0/0 to near Gandugulapally (V) to km 13.450 near Apparaopeta (V) of Dammapeta (M) in Bhadradri
Kothagudem District. Ramanthapur Pedda Cheruvu to Ramanthapur Chinna Cheruvu b) Ramanthapur Chinna Cheruvu
to Irrigation Channel in L.B Nagar Zone of GHMC Under Package V (E) of Strategic Nala Development Programme.
Agency :- M/S Prasad & Co. (Pw) LTD AVR. MAX (JV)

Material Received :- High Strength Deformed Steel Bar/Reinforcement Steel Bar Method of Test :- I.S.1608-2018 P-1
Sample Mark :- GOEL TMT Test Started :- 11-06-2022
Grade of Steel :- Fe 500 D Test Completed :- 11-06-2022

A) High Strength Deformed Steel Bar test Result.


Cross Sectional Area Proof Stress 0.2% / Yield Tensile Stress Bend/Re-Bend
S.NO Bar Dia (mm) Mass in Kg/m Elongation %
(mm2) Stress (Mpa) (Mpa) Stress
1 16.0 1.558 201.06 518.0 612.00 18.2 A

2 16.0 1.560 201.06 522.0 615.00 18.8 A

3 16.0 1.549 201.06 512.0 609.00 17.9 A


IS:1599-1985 RA
Method of Test IS: 1786:2008 RA-2013 IS: 1608-2018 P-1
2006
Bend/Rebend Stresses Type of Class A= Satisfaction, Type of Class B= Unsatisfaction

Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)


Property Fe 415 Fe 415D Fe 500 Fe 500D Fe 550 Fe 550D Fe 600
0.2% Proof 415 415 500 500 550 550 600
Max.tensile Stress N/mm2,
Min/% more than actual Yield 485/10% 485/12% 545/8% 565/10% 585/6% 600/8% 660/6%
Stress
Min Elongation % 14.8 18 12 16 10 14.5 10
Bend Test:- There Shall not be any transverse crack/fracture in the bent portion.
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Diameter in mm 8 10 12 16 20 25 28 32
Mass per meter(kg) 0.395 0.617 0.888 1.580 2.470 3.850 4.830 6.310
Tolerances on Nominal -8% -6% -4%
**End of Report**
Note:-
1. The Results are given only for the samples submitted by the Client.
2. Manglam Consultancy Services is not responsible for any interpretation of test results.
3. Reports are not supposed to be used for publicity.
For Manglam Consultancy Services Hyderabad

Tested By Authorised Signatory


Test Report on Mechanical Properties of High Strength Deformed Steel Bar
TRF No :- TMT/12mm/20220611/002 Date of Report :- 13-06-2022
Report Ref No :- MCS-HYD/2022-23/Reports/Lab/Steel/12mm/20220613002

:- SRLIP-Package-10 Sathupally Trunts Earth Work, Excavation, Forming embankment and providing CC Lining
including construction of CM&CD works structure on of sathupally main canal from km 23.700 near cherukupally (V)
sathupally (M) in Khammam District to km 42.775 near Gandugulapally (V) Dammapeta (M) in Bhadradri
Name of Work Kothagudem District Bethupally branch canal from 0/0 to 1.740 in Gandugulapally (V) Dammapeta (M) and
Dammapeta branch canal from 0/0 to near Gandugulapally (V) to km 13.450 near Apparaopeta (V) of Dammapeta
(M) in Bhadradri Kothagudem District. Ramanthapur Pedda Cheruvu to Ramanthapur Chinna Cheruvu b)
Ramanthapur Chinna Cheruvu to Irrigation Channel in L.B Nagar Zone of GHMC Under Package V (E) of Strategic Nala
Agency :- M/S Prasad & Co. (Pw) LTD AVR. MAX (JV)

Material Received :- High Strength Deformed Steel Bar/Reinforcement Steel Bar Method of Test :- I.S.1608-2018 P-1
Sample Mark :- GOEL TMT Test Started :- 11-06-2022
Grade of Steel :- Fe 500 D Test Completed :- 11-06-2022

A) High Strength Deformed Steel Bar test Result.


Cross Sectional Area Proof Stress 0.2% / Yield Tensile Stress Bend/Re-Bend
S.NO Bar Dia (mm) Mass in Kg/m Elongation %
(mm2) Stress (Mpa) (Mpa) Stress
1 12.0 0.893 113.10 645.0 695.00 21.6 A

2 12.0 0.887 113.10 642.0 691.00 19.2 A

3 12.0 0.883 113.10 637.0 697.00 19.8 A


IS:1599-1985 RA
Method of Test IS: 1786:2008 RA-2013 IS: 1608-2018 P-1
2006
Bend/Rebend Stresses Type of Class A= Satisfaction, Type of Class B= Unsatisfaction
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Property Fe 415 Fe 415D Fe 500 Fe 500D Fe 550 Fe 550D Fe 600
0.2% Proof 415 415 500 500 550 550 600
Max.tensile Stress N/mm2,
Min/% more than actual 485/10% 485/12% 545/8% 565/10% 585/6% 600/8% 660/6%
Yield Stress
Min Elongation % 14.8 18 12 16 10 14.5 10
Bend Test:- There Shall not be any transverse crack/fracture in the bent portion.
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Diameter in mm 8 10 12 16 20 25 28 32
Mass per meter(kg) 0.395 0.617 0.888 1.580 2.470 3.850 4.830 6.310
Tolerances on Nominal -8% -6% -4%
**End of Report**
Note:-
1. The Results are given only for the samples submitted by the Client.
2. Manglam Consultancy Services is not responsible for any interpretation of test results.
3. Reports are not supposed to be used for publicity.
For Manglam Consultancy Services Hyderabad

Tested By Authorised Signatory


Test Report on Mechanical Properties of High Strength Deformed Steel Bar
TRF No :- TMT/10mm/20220611/001 Date of Report :- 13-06-2022
Report Ref No :- MCS-HYD/2022-23/Reports/Lab/Steel/10mm/20220613001

:- SRLIP-Package-10 Sathupally Trunts Earth Work, Excavation, Forming embankment and providing CC Lining
including construction of CM&CD works structure on of sathupally main canal from km 23.700 near cherukupally (V)
sathupally (M) in Khammam District to km 42.775 near Gandugulapally (V) Dammapeta (M) in Bhadradri
Name of Work Kothagudem District Bethupally branch canal from 0/0 to 1.740 in Gandugulapally (V) Dammapeta (M) and
Dammapeta branch canal from 0/0 to near Gandugulapally (V) to km 13.450 near Apparaopeta (V) of Dammapeta
(M) in Bhadradri Kothagudem District. Ramanthapur Pedda Cheruvu to Ramanthapur Chinna Cheruvu b)
Ramanthapur Chinna Cheruvu to Irrigation Channel in L.B Nagar Zone of GHMC Under Package V (E) of Strategic Nala
Agency :- M/S Prasad & Co. (Pw) LTD AVR. MAX (JV)

Material Received :- High Strength Deformed Steel Bar/Reinforcement Steel Bar Method of Test :- I.S.1608-2018 P-1
Sample Mark :- GOEL TMT Test Started :- 11-06-2022
Grade of Steel :- Fe 500 D Test Completed :- 11-06-2022

A) High Strength Deformed Steel Bar test Result.


Cross Sectional Area Proof Stress 0.2% / Yield Tensile Stress Bend/Re-Bend
S.NO Bar Dia (mm) Mass in Kg/m Elongation %
(mm2) Stress (Mpa) (Mpa) Stress
1 10.0 0.600 78.54 588.0 658.00 20.3 A

2 10.0 0.608 78.54 586.0 659.00 18.2 A

3 10.0 0.602 78.54 583.0 655.00 19.5 A


IS:1599-1985 RA
Method of Test IS: 1786:2008 RA-2013 IS: 1608-2018 P-1
2006
Bend/Rebend Stresses Type of Class A= Satisfaction, Type of Class B= Unsatisfaction
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Property Fe 415 Fe 415D Fe 500 Fe 500D Fe 550 Fe 550D Fe 600
0.2% Proof 415 415 500 500 550 550 600
Max.tensile Stress N/mm2,
Min/% more than actual 485/10% 485/12% 545/8% 565/10% 585/6% 600/8% 660/6%
Yield Stress
Min Elongation % 14.8 18 12 16 10 14.5 10
Bend Test:- There Shall not be any transverse crack/fracture in the bent portion.
Requirement as per IS 1786-2008 RA 2013, (Amend 4, 2019)
Diameter in mm 8 10 12 16 20 25 28 32
Mass per meter(kg) 0.395 0.617 0.888 1.580 2.470 3.850 4.830 6.310
Tolerances on Nominal -8% -6% -4%
**End of Report**
Note:-
1. The Results are given only for the samples submitted by the Client.
2. Manglam Consultancy Services is not responsible for any interpretation of test results.
3. Reports are not supposed to be used for publicity.
For Manglam Consultancy Services Hyderabad

Tested By Authorised Signatory

You might also like