DoW LDPE 2685G
DoW LDPE 2685G
DOWLEX™ 2685G
Polyethylene Resin
Overview DOWLEX™ 2685G Linear Low Polyethylene Resin is designed for the production of a wide variety of film applications.
Films made from this resin exhibit a combination of good toughness and tear resistance.
Complies with:
• U.S. FDA FCN 741
• Canadian HPFB No Objection
• EU, No 10/2011
Consult the regulations for complete details.
Notes
These are typical properties only and are not to be construed as specifications. Users should confirm results by their own tests.
1Base density is estimated using the assumption that every 1000 ppm of antiblock in the finished product raises the density of the polymer
by 0.0006 g/cm³. Base density is the estimated density of the polymer if it did not contain any antiblock.
Customer Dow strongly encourages its customers to review both their manufacturing processes and their
Notice applications of Dow products from the standpoint of human health and environmental quality to ensure
that Dow products are not used in ways for which they are not intended or tested. Dow personnel are
available to answer your questions and to provide reasonable technical support. Dow product literature,
including safety data sheets, should be consulted prior to use of Dow products. Current safety data sheets
are available from Dow.
Medical Any and all medical application use of Dow materials, whether a device, a component, or any type of
Applications primary or secondary packaging of a medically related object or substance, needs to be reviewed and
approved by Dow before any Dow material can be tested in such application.
Policy
Dow requests that customers considering use of Dow products in medical applications notify Dow so that
appropriate assessments may be conducted. Dow does not endorse or claim suitability of its products for
specific medical applications. It is the responsibility of the medical device or pharmaceutical manufacturer
to determine that the Dow product is safe, lawful, and technically suitable for the intended use. DOW
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SUITABILITY OF ANY DOW
PRODUCT FOR USE IN MEDICAL APPLICATIONS.
For further information contact your Dow sales or technical representative to request a Medical Application
Review Request Form.
Additional details of Dow’s Medical Applications Policy are available at: https://www.dow.com/en-us/
support/product-safety.html
Tobacco and Dow does not support or intend for its products to be used, directly or indirectly, in the production of
Marijuana Policy tobacco, the manufacture of tobacco products, the manufacture and use of electronic cigarettes (including
vaping devices), the production of marijuana, or the manufacture of marijuana products intended for
human consumption, where the Dow product (or its residues) may be present in the finished product or be
alleged to facilitate the delivery of nicotine, other tobacco components, marijuana, or marijuana
components.
Harmful Dow does not intend for its products to be used in applications specifically intended to harm humans.
Applications
Policy
Disclaimer NOTICE: No freedom from infringement of any patent owned by Dow or others is to be inferred. Because
use conditions and applicable laws may differ from one location to another and may change with time, the
Customer is responsible for determining whether products and the information in this document are
appropriate for the Customer’s use and for ensuring that the Customer’s workplace and disposal practices
are in compliance with applicable laws and other governmental enactments. Dow assumes no obligation
or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY EXCLUDED.
NOTICE: If products are described as “experimental” or “developmental”: (1) product specifications may not be fully determined;
(2) analysis of hazards and caution in handling and use are required; (3) there is greater potential for Dow to change specifications
and/or discontinue production; and (4) although Dow may from time to time provide samples of such products, Dow is not obligated
to supply or otherwise commercialize such products for any use or application whatsoever.
NOTICE: This data is based on information Dow believes to be reliable, as demonstrated in controlled
laboratory testing. They are offered in good faith, but without guarantee, as conditions and method of use
of Dow products are beyond Dow’s control. Dow recommends that the prospective user determine the
suitability of these materials and suggestions before adopting them on a commercial scale.
To the best of our knowledge, the information contained herein is accurate and reliable as of the date of
publication, however we do not assume any liability for the accuracy and completeness of such
information.
For additional information, not covered by the content of this document, contact us via our web site http://
www.dow.com/products_services/.
www.dow.com This document is intended for use within Asia Pacific, Latin America, North America
Published: 2005-11-17