Scribd
Upload
247 views2 pages

Ceridust TP 5091 For UV-curable Coatings With A Silk Finish: Exactly Your Chemistry

TP Ceridust 5091 is a micronized ester wax additive for UV-curable coatings that provides a silk finish and improves slip and antiblocking properties. It has UV-reactive functional groups that allow it to polymerize into the coating during curing, permanently linking the polymer and additive. Even small additions of 2-5% can produce better surface properties than conventional additives like silicic acid. It has an average particle size of 9.5 μm, drop point of around 113°C, and acid value and density of approximately 6 mg KOH/g and 1.02 g/cm3, respectively.

Uploaded by

Maximiliano Mackevicius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
247 views2 pages

Ceridust TP 5091 For UV-curable Coatings With A Silk Finish: Exactly Your Chemistry

TP Ceridust 5091 is a micronized ester wax additive for UV-curable coatings that provides a silk finish and improves slip and antiblocking properties. It has UV-reactive functional groups that allow it to polymerize into the coating during curing, permanently linking the polymer and additive. Even small additions of 2-5% can produce better surface properties than conventional additives like silicic acid. It has an average particle size of 9.5 μm, drop point of around 113°C, and acid value and density of approximately 6 mg KOH/g and 1.02 g/cm3, respectively.

Uploaded by

Maximiliano Mackevicius
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Exactly your chemistry.

Ceridust TP 5091 for


UV-curable coatings
with a silk finish
Additives

> Additive for improving


flatting and slip in
UV-curable systems

Clariant GmbH . Pigments & Additives Division . BU Additives/BL Waxes


P.O. Box 101562 . D-86005 Augsburg
Phone: +49 (821)479-2460 . Fax: +49 (821)479-2890 . www.pa.clariant.com
Exactly your chemistry.

Product description

TP Ceridust 5091 is a micronized stance to be achieved, among other Even relatively small additions of
ester wax with an average particle advantages. With this new wax, it is 2 - 5% based on the total formulation
size of 9.5 µm. also possible to give UV-curable coa- produce better surface properties
tings a matt finish, which is usually than conventional additives such as
UV-reactive functional groups are the difficult to achieve with conventional silicic acid. If highly matt surfaces
special feature of this wax. They ena- waxes because of the high film thik- are required, a certain amount of
ble the wax to be polymerized into the knesses. silicic acid can also be replaced by
UV-curable system during the curing this product.
process. This means that the polymer At the same time, slip and antiblok-
and additive are permanently linked, king properties are improved by addi-
so enabling excellent chemical resi- tion of TP Ceridust 5091.

Technical data

Drop point approx. 113°C

Acid value approx. 6 mg KOH/g

Density at 20°C approx. 1.02 g/cm3

Particle size, dV50 approx. 9 µm

This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not
therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing
industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.

Clariant GmbH . Pigments & Additives Division . BU Additives/BL Waxes


P.O. Box 101562 . D-86005 Augsburg
Phone: +49 (821)479-2460 . Fax: +49 (821)479-2890 . www.pa.clariant.com

You might also like