EN

• Do not open the housing of the product or take it apart. reference only and should not be used for medical Connecting fitness tracker with Fitness tracker menus
• Keep the product away from extremely high or low purposes. FitPro app 1. Home screen: Time, date (steps and pulse if
temperatures. applicable)
• Do not use the product in a sauna or steam bath. For initial use you have to pair the fitness tracker with the
2. Steps + distance + calories burned
• Do not leave the product exposed to the sun for a long app. After successful pairing, time will be automatically
3. Health: Pulse, blood pressure, blood oxygen level -
synced with the fitness tracker.
time. Tips before use • Launch the FitPro app - click “Set” in the app
press the control panel for approx. 2 sec. to start the
• Do not expose of the product by burning, the internal Please read this user manual carefully for correct use and measurements.
battery can explode. • Tap on the green bar „Connect devices to get more
keep it in a safe place for future reference. Please charge 4. Sport: Press the control panel for approx. 2 sec. to
• The product contains an internal battery that can not functions“ - click on the device, to start a connection.
the fitness tracker for 2 hours before first use. During the switch between the sports “running”, “jumping rope”
be changed by the user. • After successful pairing the app will automatically
charging process the battery symbol will appear on the and “situps” by tapping briefly. After your selection,
• Do not read any incoming call notifications or other save the Bluetooth address of the wristband. When
display. press the control panel approx. 2 sec. to start the timer.
information on the product display while driving a the app is launched or runs in the background, it will
Hold again to reset the time to zero. ATTENTION! The
automatically search for the wristband and connect to
Fitness Tracker FTY18 vehicle, or in any other situation where distraction can
lead to dangerous situations. it.
timer can not be paused!
5. Message: Launch the FitPro app - Set - Message
• Reading of distance traveled can be inaccurate. INSTALL “FITPRO” APP ON YOUR • Make sure, that the app runs in the background and
Push - turn on the permission, so that messages can
usER’s mANuAL This is only for reference and should not be used for SMARTPHONE all permissions have been granted in the phone’s
be pushed to your wristband after your phone has
Before operating this unit, navigation. Install the “FITPRO” app on your smart phone by scanning system settings, such as running in the background
please read this manual thoroughly received them. Only the last 3 messages received will
• The product should normally be worn one finger this QR code, or search for the app in the App Store (iOS) and reading contact information.
and retain it for future reference. be displayed.
width below the wrist. At the same location you would / Google Play (Android). 6. Music: Hold the control panel on your fitness tracker
normally wear an armband. for approx. 2 sec. to open the submenu. Here you can
Wristband functions control the music playing on your smartphone. You
• To switch the device on when it is switched off, press have the following choices: Back one song (left arrow),
the control panel (circle on display) for longer than 3 forward one song (right arrow), pause/play. Briefly
FIRST STEPS ATTENTION: This product can cause skin irritations. seconds. tap the control panel in the submenu for the chosen
ATTENTION: Please fully charge your smartwatch before Contact over a prolonged time can promote skin irritations • When the device is switched on, but the display is function. The symbol colored in red is the available
the first use, check that the product is complete and or allergies in some users. If signs of skin redness, off, press the control panel only briefly, to activate the function. To choose the function, hold the control panel
remove the protective films from display and back side swelling, itching or skin irritation are present, please display. for approx. 2 sec. Note: The red left arrow is to leave
(sensor area). discontinue the use of this product. Further use may • Press the control panel of the display for approx. 2 the menu.
Please read this user manual carefully before using the cause renewed or more severe irritation, even if previous seconds, to enter the submenu, if available. Lightly tap 7. More: a) sleep When you fall asleep, the wristband
product. It contains important information for your safety symptoms have subsided. on the control panel to move through the features of automatically switches to sleep monitoring mode,
as well as instructions for use and maintenance. Contact your dermatologist if symptoms persist. the submenu. automatically determining your sleep quality during the
Keep this user manual in a safe place. Android / iOS • ATTENTION! The wristband reset function deletes all night. You can check your sleep data on the app, after
data of the wristband (e.g. step counter). synchronization has been completed.
WARNING Compatible operating system and requirements: • In the home screen display, hold the control panel to Note: Please wear the wristband while sleeping, so data
Measurements for pulse and blood pressure should Bluetooth 4.2 switch between dial faces. After switching, the display can be recorded. Sleep will be recognized after 10:00 PM.
SAFETY MEASURES not be used for self diagnosis or treatment. Users with Android 5.0 and above will switch off if no further operation is performed Sleep data can be synchronized with the app after 4 hours
blood pressure or circulatory disorders should undergo iOS 9.0 and above within 5 seconds. of sleep. b) Weather, c) “Take a picture”, hold the control
• This product contains electrical components that can treatments only in consultation with a physician. The panel for approx. 2 sec. to start the process. Please note
cause injuries when used improperly. measurement results of this fitness tracker are for
that the app must be launched for this, d) “Search for”, Top symbol bar: Note for charging the fitness tracker SERVICE PROCESS EU CONFORMITY DECLARATION
hold the control panel for approx. 2 sec. and the wristband Please remove the wristband at the top of the housing.
If you have any reason for complaints or your device The company JAY-tech GmbH hereby declares that the
will search for your smartphone, which will answer with a Plug the connector in a regular USB charger (not included)
has a defect, please contact your retailer or the service described product complies with the directive 2014/53/
beep, e) “Reset”, hold the control panel for approx. 2 sec. or the USB port of a laptop. The charging process is
department of JAY-tech GmbH, to arrange for customer EU and others, applicable to the product.
and your smartwatch will reset and restart. ATTENTION: indicated on the display with a battery symbol. service. The full text of the EU conformity declaration is available
All data will be deleted!
F) QR code, g) information about the fitness tracker and 1. Lift your wrist: The fitness tracker‘s display is activated under the following internet address:
Service hours: Mon - Tue from 8:00AM to 5:00PM
hold the control panel to switch off the smartwatch. when you move your wrist. www.jay-tech.de
Friday from 8:00AM to 2:00PM
2. DND mode: Timer for not receiving messages.
Telephone no.: 02161 / 575 8950
3. My alarms: Setting of alarms The device carries the CE mark and
E-mail: [email protected]
APP functions and settings 4. Long sitting: Setting for reminders when sitting too complies with all required EU standards.
long.
Note: Some of the functions require you to log in. Please do not send the device to our address without
Please register for this on the home screen. You can skip being requested by our service team. Shipping cost and
the registration process by tapping “skip” in the top right risk of loss are borne by the sender. DIRECTIVE 2012/19/EU ON WASTE
corner. Tracking “Running”! At the top you can choose
We reserve the right to refuse acceptance of ELECTRICAL AND ELECTRONIC EQUIPMENT
between walking, running and bicycling. Tap “Start” to
Technical data: unauthorized shipments and send such shipments back (WEEE)
Explanation of the app bottom bar symbols: Battery: 90 mAh lithium-polymer to the sender freight collect or at the sender’s expense.
start the tracking (for this you must be registered and Waste equipment does not belong in
logged in). Display: 1.44“ / 3.66 cm with single touch (single touch household waste! If the device at some
control panel) point in time can not be used anymore,
User profile “Mine” Please set your personal data in the Bluetooth 4.2 each consumer is required by law to
user profile after launching the app. Operating temperature: -10°C ~ 50°C dispose of waste equipment separately
First page “Steps” Here you can check the number
System: iOS 9.0 and above / Android 5.0 and above from household waste, e.g. at a municipal/
of steps, distance traveled, calories burned, health
assessment, pulse, sleep and “healthy habits” district collection point. This ensures that
Setting “Set” If not already done so, you can connect to waste equipment is recycled properly and
(registration necessary)
your fitness tracker here. Press on the submenu “find” and negative effects on the environment are
the fitness tracker will vibrate. minimized. Thus electrical devices are
Under “Message push” you can choose, which messages marked with this symbol.
Tips for Android users:
you want to receive.
When using the reminder function, you must set that the
In “Dial settings” you can choose the dial design under
FitPro app can run in the background. We recommend to
“Recommended”. Choose a design and tap “Sync dial”.
grant the FitPro app all permissions.
The design is downloaded and updated.
“Reset device” - Attention, this will reset the device and
delete all data!
“Remove” - Data will be deleted and device removed.
“Others” - Vibration settings of the fitness tracker. JAY-tech GmbH
Krefelder Strasse 657 Tel. 02161/575 890
D-41066 Moenchengladbach www.jay-tech.de
Germany [email protected]

© 2022 JAY-tech GmbH. All rights reserved. FT-FTY18 l 03/2022