Scribd
Upload
26 views1 page

1971 Evinrude Fisherman 6HP Outboards Service Manual 4746 Page-3

Uploaded by

ZakiFroid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
26 views1 page

1971 Evinrude Fisherman 6HP Outboards Service Manual 4746 Page-3

Uploaded by

ZakiFroid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

b.

Install cam, making certain that side marked


"TOP" is up. See Figure 4-16.

LOCA TING RING 2.914

Figure 4-15. Coil Locating Ring

2.974

Figure 4-17. Flywheel Key Position

c. Apply a coat of OMC Type "A" lubricant to the


magneto support and retaining ring, and attach to
power head. Make certain retaining ring is installed
with tapered side down. Align screw holes of the
magneto support ring to correspond to the position
of the magneto. See Figure 4-18. DO NOT add oil
or grease to the oiler wick on the magneto.

Figure 4-16. Oiler Wick

REASSEMBLY OF
MAGNETO TO MOTOR
a. If flywheel key has been removed, reassemble to
crankshaft with outer edge vertical. See Figure 4-17. Figure 4-18. Magneto Support Position

E
o
u
...:
)(

...'ii
ii:

4-8 III
Download this Manual 60
o

You might also like