LADDER CROSS-REFERENCE CATALOG

CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS STEPLADDERS
7400 SERIES STEPLADDER
Patented EDGE® bracing provides enhanced bottom bracing strength and increased
ANSI IAA protection against damage. Aluminum external rail shields provide additional reinforcement
Load Capacity: 375 lbs to the bottom. Full set of large heavy duty aluminum knee braces on all front steps and all
rear horizontals. Heavy-duty aluminum Tool-Tra-Top® securely holds drills and other tools.
Internal spreader bars.
Ladder Height 4’, Approx. Shipping Weight 16.5 lbs.,
4XN71 4 FT Werner 7404
Base Spread 30-1/2”, Bottom Width 21-1/2”
Ladder Height 5’, Approx. Shipping Weight 20.0 lbs.,
3AZX4 5 FT Werner 7405
Base Spread 36-3/4”, Bottom Width 23-1/4”
Ladder Height 6’, Approx. Shipping Weight 23.5 lbs.,
4XN72 6 FT Werner 7406
Base Spread 42-7/8”, Bottom Width 25”’
Ladder Height 7’, Approx. Shipping Weight 28.0 lbs.,
3AZX5 7 FT Werner 7407
Base Spread 49”, Bottom Width 26-3/4”
Ladder Height 8’, Approx. Shipping Weight 32.0 lbs.,
4XN73 8 FT Werner 7408
Base Spread 55-1/4”, Bottom Width 28-1/2”
Ladder Height 10’, Approx. Shipping Weight 40.5 lbs.,
4XN74 10 FT Werner 7410
Base Spread 67-1/2”, Bottom Width 32”
Ladder Height 12’, Approx. Shipping Weight 49.5 lbs.,
4XN75 12 FT Werner 7412
Base Spread 79-7/8”, Bottom Width 35-1/2”
7300 SERIES STEPLADDER
Patented EDGE® bracing provides enhanced bottom bracing strength and increased
ANSI IAA protection against damage. Molded non-conductive external rail shields helps protect
Load Capacity: 375 lbs bottom from damage. Large heavy duty aluminum knee braces on all front steps and all
rear horizontals. Heavy-duty aluminum Tool-Tra-Top® securely holds drills and other tools.
Internal spreader bars.
Ladder Height 4’, Approx. Shipping Weight 16.0 lbs.,
6JJ81 4 FT Werner 7304
Base Spread 29-3/4”, Bottom Width 21-1/2”
Ladder Height 5’, Approx. Shipping Weight 19.5 lbs.,
3AZX3 5 FT Werner 7305
Base Spread 35-7/8”, Bottom Width 23-1/4”
Ladder Height 6’, Approx. Shipping Weight 22.5 lbs.,
6JJ82 6 FT Werner 7306
Base Spread 42”, Bottom Width 25”’
Ladder Height 8’, Approx. Shipping Weight 31.0 lbs.,
6JJ83 8 FT Werner 7308
Base Spread 54-3/4”, Bottom Width 28-1/2”
Ladder Height 10’, Approx. Shipping Weight 40.5 lbs.,
6JJ84 10 FT Werner 7310
Base Spread 66-5/8”, Bottom Width 32”
Ladder Height 12’, Approx. Shipping Weight 49.5 lbs.,
6JJ85 12 FT Werner 7312
Base Spread 79”, Bottom Width 35-1/2”
6300 SERIES STEPLADDER
Patented EDGE360TM feet provide protection from every angle with integrated rail shield,
ANSI IAA EDGE Bracing and Over-Sized feet and foot pads. Feature rich LOCKTOPTM with slots to
Load Capacity: 375 lbs accommodate Lock-In accessories such as the ToolLasso and JobBucket. Double riveted,
slip-resistant Traction-Tred® steps. All steps and are knee-braced. Full set of rear
horizontals. Internal Spreader Bars.
Ladder Height 4', Approx. Shipping Weight 16.0 lbs.,
29JV18 4 FT Werner 6304
Base Spread 29", Bottom Width 19 7/8"
Ladder Height 5', Approx. Shipping Weight 19.0 lbs.,
29JV20 5 FT Werner 6305
Base Spread 35-1/8", Bottom Width 21 5/8"
Ladder Height 6', Approx. Shipping Weight 22.0 lbs.,
29JV21 6 FT Werner 6306
Base Spread 41-1/4", Bottom Width 23 3/8"
Ladder Height 8', Approx. Shipping Weight 31.0 lbs.,
29JV23 8 FT Werner 6308
Base Spread 53-5/8", Bottom Width 27 7/8"
Ladder Height 10', Approx. Shipping Weight 39.0 lbs.,
29JV25 10 FT Werner 6310
Base Spread 65-7/8", Bottom Width 30 3/8"
Ladder Height 12', Approx. Shipping Weight 48.0 lbs.,
29JV27 12 FT Werner 6312
Base Spread 78-1/4", Bottom Width 33 7/8"

1
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS STEPLADDERS continued

6200 SERIES STEPLADDER
Patented EDGE360TM feet provide protection from every angle with integrated rail shield,
ANSI IA EDGE Bracing and Over-Sized feet and foot pads. Feature rich LOCKTOPTM with slots to
Load Capacity: 300 lbs accommodate Lock-In accessories such as he ToolLasso and JobBucket. Double riveted,
slip-resistant Traction-Tred® steps. All steps and are knee-braced. Full set of rear horizontals.
Internal Spreader Bars.

Ladder Height 3’, Approx. Shipping Weight 13.0#, Base

41D245 3 FT Werner 6203
Spread 23-1/8”, Bottom Width 18-1/8”

Ladder Height 4’, Approx. Shipping Weight 16.0 lbs.,

3W421 4 FT Werner 6204
Base Spread 29”, Bottom Width 19-7/8”

Ladder Height 5’, Approx. Shipping Weight 19.0 lbs.,

3AZX1 5 FT Werner 6205
Base Spread 35-1/8” , Bottom Width 21-5/8”

Ladder Height 6’, Approx. Shipping Weight 22.0 lbs.,

3W141 6 FT Werner 6206
Base Spread 41-1/4”, Bottom Width 23-3/8”’

Ladder Height 7’, Approx. Shipping Weight 26.0 lbs.,

3AZX2 7 FT Werner 6207
Base Spread 47-1/2”, Bottom Width 25-1/8”

Ladder Height 8’, Approx. Shipping Weight 30.0 lbs.,

3W142 8 FT Werner 6208
Base Spread 53-5/8”, Bottom Width 26-7/8”

Ladder Height 10’, Approx. Shipping Weight 39.0 lbs.,

3W183 10 FT Werner 6210
Base Spread 65-7/8”, Bottom Width 30-3/8”

Ladder Height 12’, Approx. Shipping Weight 48.0 lbs.,

3W422 12 FT Werner 6212
Base Spread 78-1/4”, Bottom Width 33-7/8”

6100 SERIES STEPLADDER

Patented, molded, versatile HolsterTop® securely holds drills and other tools. Top is designed
ANSI IA with sockets in back to accommodate Lock-In accessories such as he ToolLasso and
Load Capacity: 300 lbs JobBucket. Double riveted, slip-resistant Traction-Tred® steps. Full set of rear horizontals.
Oversized, molded PROGUARD BOOTSTM provide firm slip-resistant footing and protect
fiberglass rail. Internal spreader bars.

Ladder Height 4', Approx. Shipping Weight 15.0 lbs.,

29JV19 4 FT Werner 6104
Base Spread 28-7/8", Bottom Width 19"

Ladder Height 6', Approx. Shipping Weight 21.0 lbs.,

29JV22 6 FT Werner 6106
Base Spread 41-1/8", Bottom Width 22"

Ladder Height 8', Approx. Shipping Weight 30.0 lbs.,

29JV24 8 FT Werner 6108
Base Spread 53-1/2", Bottom Width 25"

Ladder Height 10', Approx. Shipping Weight 35.5 lbs.,

29JV26 10 FT Werner 6110
Base Spread 65-3/4", Bottom Width 28"

Ladder Height 12', Approx. Shipping Weight 44.0 lbs.,

29JV28 12 FT Werner 6112
Base Spread 78-1/8", Bottom Width 31"

6000 SERIES STEPLADDER

Patented EDGE® bracing provides enhanced bottom bracing strength and increased
ANSI I
protection against damage. Patented, molded, versatile HolsterTop® securely holds drills and
Load Capacity: 250 lbs
other tools. Top is designed with sockets in back to accommodate Lock-In Accessories such
as the ToolLasso® and JobBucket. External spreader bars.

Ladder Height 4’, Approx. Shipping Weight 13.0 lbs.,

4W077 4 FT Werner 6004
Base Spread 28-7/8”, Bottom Width 19”

Ladder Height 5’, Approx. Shipping Weight 16.0 lbs.,

6AZW9 5 FT Werner 6005
Base Spread 35”, Bottom Width 20-1/2”

Ladder Height 6’, Approx. Shipping Weight 18.0 lbs.,

4W078 6 FT Werner 6006
Base Spread 41-1/8”, Bottom Width 22”

Ladder Height 8’, Approx. Shipping Weight 25.5 lbs.,

4W079 8 FT Werner 6008
Base Spread 53-1/2”, Bottom Width 25”

2
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS TWIN STEPLADDERS

T7400 SERIES TWIN STEPLADDER
Twin Stepladders are great for two-person jobs. Patented EDGE® bracing provides enhanced
ANSI IAA / IA
bottom bracing strength and increased protection against damage. Aluminum external rail
Load Capacity: 375 / 300 lbs (per side)
shields provide additional reinforcement to the bottom. Large heavy duty aluminum knee
braces on all front and back steps. Heavy-duty aluminum Tool-Tra-Top®. Internal Spreader Bars.
4 FT Ladder Height 4’, Approx. Shipping Weight 21.5 lbs.,
4XP48 Werner T7404
375 lbs Base Spread 36-1/8”, Bottom Width 21-1/2”
5 FT Ladder Height 5’, Approx. Shipping Weight 29.0#, Base
41D242 Werner T7405
375 lbs Spread 43-1/8”, Bottom Width 23-1/2”
6 FT Ladder Height 6’, Approx. Shipping Weight 30.0 lbs.,
4XP49 Werner T7406
375 lbs Base Spread 50-1/8”, Bottom Width 25”
8 FT Ladder Height 8’, Approx. Shipping Weight 40.5 lbs.,
4XP50 Werner T7408
375 lbs Base Spread 64-1/8”, Bottom Width 28-1/2”
10 FT Ladder Height 10’, Approx. Shipping Weight 51.5 lbs.,
4XP51 Werner T7410
375 lbs Base Spread 78-1/4”, Bottom Width 32”
12 FT Ladder Height 12’, Approx. Shipping Weight 63.5 lbs.,
4XP52 Werner T7412
375 lbs Base Spread 92-1/4”, Bottom Width 35-1/2”
14 FT Ladder Height 14’, Approx. Shipping Weight 86.0 lbs.,
4XP53 Werner T7414
300 lbs Base Spread 106-1/4”, Bottom Width 39”
16 FT Ladder Height 16’, Approx. Shipping Weight 103.5 lbs.,
4XP54 Werner T7416
300 lbs Base Spread 120-1/4”, Bottom Width 42-1/8”
20 FT Ladder Height 20’, Approx. Shipping Weight 149.0 lbs.,
4XP55 Werner T7420
300 lbs Base Spread 150-1/8”, Bottom Width 49-1/2”
T6200 SERIES STEPLADDER
Twin Stepladders are great for two-person jobs. Patented moded versatile HolsterTop®
ANSI IA
securely holds drills and other tools. Slip-resistant Traction-Tred® steps are double riveted.
Load Capacity: 300 lbs (per side)
Patented EDGE360TM feet provide protection from every angle with integrated rail shield,
EDGE Bracing and over-sized feet and foot pads.
Ladder Height 4’, Approx. Shipping Weight 19.0 lbs.,
6YG79 4 FT Werner T6204
Base Spread 36-1/8”, Bottom Width 19-7/8”
Ladder Height 5’, Approx. Shipping Weight 23.0 lbs.,
3AZX6 5 FT Werner T6205
Base Spread 43-1/8”, Bottom Width 21-5/8”
Ladder Height 6’, Approx. Shipping Weight 27.0 lbs.,
6YG80 6 FT Werner T6206
Base Spread 50-1/8”, Bottom Width 23-3/8”
Ladder Height 8’, Approx. Shipping Weight 37.0 lbs.,
6YG81 8 FT Werner T6208
Base Spread 64-1/8”, Bottom Width 26-7/8”
Ladder Height 10’, Approx. Shipping Weight 54.5 lbs.,
3AZX7 10 FT Werner T6210
Base Spread 78-1/8”, Bottom Width 30-3/8”
Ladder Height 12’, Approx. Shipping Weight 68.5 lbs.,
3AZX8 12 FT Werner T6212
Base Spread 92-1/8”, Bottom Width 33-7/8”
PD7300 SERIES PODIUM LADDER
Ideal for working at fixed heights. Extra large platform for long standing comfort and allows
ANSI IAA
you to work safely in any direction. Waist high guard rail wraps around work zone and
Load Capacity: 375 lbs
securely holds tools. Slip-resistant steps are knee-braced and double riveted. The EDGE360®
bracing system gives protection from every angle and oversized foot pads.

Ladder Height 6', Platform Height is 3'. Approx. Ship

36FX50 6 FT Werner PD7303
Weight 22.5 lbs., Base Spread 36", Bottom Width 26 "

Ladder Height 7', Platform Height is 4'. Approx. Ship

36FX51 7 FT Werner PD7304
Weight 28.0 lbs., Base Spread 42", Bottom Width 27 "

Ladder Height 9', Platform Height is 6'. Approx. Ship

36FX52 9 FT Werner PD7306
Weight 34 lbs., Base Spread 55", Bottom Width 31"

Ladder Height 11', Platform Height is 8'. Approx. Ship

36FX53 11 FT Werner PD7308
Weight 46 lbs., Base Spread 69", Bottom Width 35 "

3
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS PODIUM LADDERS

PD6200 SERIES PODIUM LADDER
Ideal for working at fixed heights. Extra large platform for long standing comfort and allows
ANSI IA
you to work safely in any direction. Waist high guard rail wraps around work zone and
Load Capacity: 300 lbs
securely holds tools. Slip-resistant steps are knee-braced and double riveted. The EDGE360®
bracing system gives protection from every angle. Oversized foot pads.

Ladder Height 6', Platform Height is 3'. Approx. Ship

20KJ26 6 FT Werner PD6203
Weight 22.5#, Base Spread 36", Bottom Width 26 "

Ladder Height 7', Platform Height is 4'. Approx. Ship

20KJ27 7 FT Werner PD6204
Weight 28.0#, Base Spread 42", Bottom Width 27 "

Ladder Height 9', Platform Height is 6'. Approx. Ship

20KJ28 9 FT Werner PD6206
Weight 34#, Base Spread 55", Bottom Width 31"

Ladder Height 11', Platform Height is 8'. Approx. Ship

20KJ29 11 FT Werner PD6208
Weight 46#, Base Spread 69", Bottom Width 35 "

Ladder Height 13', Platform Height is 10'. Approx. Ship

20KJ30 13 FT Werner PD6210
Weight 57#, Base Spread 79", Bottom Width 38"

FIBERGLASS PLATFORM LADDERS

P7400 SERIES PLATFORM STEPLADDER
Safety guard rail encourages proper ladder use. Large platform provides secure and
ANSI IAA / IA
comfortable work area. Slip-resistant Traction-Tred® extra wide steps are knee-braced and
Load Capacity: 375 / 300 lbs
double riveted. The EDGE® bracing system helps to decrease damage to rail. Aluminum
external rail shields provide additional reinforcement to the bottom.

6 FT Ladder Height 6’, Platform Height 4’. Approx. Shipping

6W679 Werner P7404
375 lbs Weight 26.0 lbs., Base Spread 42”, Bottom Width 27”

Ladder Height 8’, Platform Height 6’. Approx. Shipping

8 FT
3W186 Werner P7406 Weight 34.0 lbs., Base Spread 54-3/8”, Bottom Width
375 lbs
30-1/2”

Ladder Height 10’, Platform Height 8’.

10 FT
6W680 Werner P7408 Approx. Shipping Weight 44.5 lbs., Base Spread 66-5/8”,
375 lbs
Bottom Width 34”

Ladder Height 12’, Platform Height 10’.

12 FT
4XP29 Werner P7410 Approx. Shipping Weight 54.5 lbs., Base Spread 79”,
300 lbs
Bottom Width 37-1/2 “

P6200 SERIES STEPLADDER

Safety guard rail encourages proper ladder use. Large platform provides secure and
ANSI IA
comfortable work area. Slip-resistant Traction-Tred® steps are double riveted. Patented
Load Capacity: 300 lbs
EDGE360TM feet provide protection from every angle with integrated rail shield, EDGE
Bracing and over-sized feet and foot pads.

Ladder Height 6’, Platform Height 4’, Approx. Shipping

4EB96 6 FT Werner P6204
Weight 24.0 lbs., Base Spread 42” , Bottom Width 26-7/8 “

Ladder Height 8’, Platform Height 6’, Approx. Shipping

4EB97 8 FT Werner P6206
Weight 32.0 lbs., Base Spread 54-3/4”, Bottom Width 30-3/8”

Ladder Height 10’, Platform Height 8’,

4EB98 10 FT Werner P6208 Approx. Shipping Weight 44.5 lbs., Base Spread 66-5/8”,
Bottom Width 33-78”

Ladder Height 12’, Platform Height 10’,

3AZY5 12 FT Werner P6210 Approx. Shipping Weight 55.0 lbs., Base Spread 79”,
Bottom Width 37-3/8”

4
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS STOCKR’S® LADDERS

PT7400-4C SERIES STOCKR’S LADDER®
ANSI IA Safety guard rail. Large platform. Slip-resistant Traction-Tred® steps on front and rear
Load Capacity: 300 lbs (per side) sections. Soft rubber wheels are easy on vinyl floors and designed to roll over thresholds.
4 spring-loaded casters allow easy 360° mobility.

Ladder Height 6’, Platform Height 4’, Approx. Shipping

3AZY6 6 FT Werner PT7404-4C
Weight 37.0 lbs., Base Spread 50”, Bottom Width 25-1/4”

Ladder Height 8’, Platform Height 6’, Approx. Shipping

4XP39 8 FT Werner PT7406-4C
Weight 53.0 lbs., Base Spread 64”, Bottom Width 28-3/4”

Ladder Height 10’, Platform Height 8’,

4XP40 10 FT Werner PT7408-4C Approx. Shipping Weight 60.5 lbs., Base Spread 78-1/4”,
Bottom Width 32-1/4”

Ladder Height 12’, Platform Height 10’,

4XP41 12 FT Werner PT7410-4C Approx. Shipping Weight 72.5 lbs., Base Spread 92-1/4”,
Bottom Width 35-3/4”

PT7400-4C SERIES STOCKR’S LADDER®

ANSI I Safety guard rail. Large platform. Slip-resistant Traction-Tred® steps on front and rear
Load Capacity: 250 lbs (per side) sections. Soft rubber wheels are easy on vinyl floors and designed to roll over thresholds.
4 spring-loaded casters allow easy 360° mobility.

Ladder Height 6’, Platform Height 4’, Approx. Shipping

4XP36 6 FT. Werner PT6004-4C
Weight 35.0 lbs., Base Spread 51”, Bottom Width is 23”

Ladder Height 8’, Platform Height 6’, Approx. Shipping

4XP37 8 FT. Werner PT6006-4C
Weight 47.0 lbs., Base Spread 65-1/2”, Bottom Width 26”

Ladder Height 10’, Platform Height 8’,

4XP38 10 FT. Werner PT6008-4C Approx. Shipping Weight 64.5 lbs., Base Spread 80”,
Bottom Width 29”

FIBERGLASS TRIPOD LADDER

FTP6200 SERIES TRIPOD STEPLADDER
ANSI IA Tripod ladders make it possible to work in tight areas, around corners, and through studs.
Load Capacity: 300 lbs 3-legged design stays stable on uneven surfaces. Molded, versatile top securely holds drills
and many other tools.

Ladder Height 4’, Approx. Shipping Weight 17.0 lbs.,

4ZY19 4 FT Werner FTP6204
Base Spread 30-1/2”, Bottom Width 31”

Ladder Height 6’, Approx. Shipping Weight 23.0 lbs.,

4EB99 6 FT Werner FTP6206
Base Spread 43-3/4”, Bottom Width 36”

Ladder Height 8’, Approx. Shipping Weight 31.0 lbs.,

4ZY20 8 FT Werner FTP6208
Base Spread 57”, Bottom Width 40”

Ladder Height 10', Approx. Ship Wt. 42.0#, Base Spread

41D249 10 FT Werner FTP6210
71", Bottom Width 51"

Ladder Height 12', Approx. Ship Wt. 51.0#, Base Spread

41D250 12 FT Werner FTP6212
77-3/4", Bottom Width 54"

5
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ELECTRICIAN’S JOBSTATION™
OBEL00 SERIES ELECTRICIAN’S JOBSTATION™
Specifically designed for the electrical contractor with integrated retractable conduit holder, wire
ANSI IAA
spool holders and multi-use hook. Custom designed HolsterTop® is equipped with groove to hold
Load Capacity: 375 lbs
pipes up to 1” diameter and includes measuring scale and tool slots. Top is designed with sockets
in back to accommodate Lock-In Accessories such as the ToolLasso® and JobBucket.

Ladder Height 4’, Approx. Shipping Weight

1FCF1 4 FT Werner OBEL04 16.0 lbs., Base Spread 29”, Base Width 19-7/8”
Note: Conduit holder not available on 4’ model

Ladder Height 6’, Approx. Shipping Weight 24.0 lbs.,

1FCF2 6 FT Werner OBEL06
Base Spread 41-1/4”, Bottom Width 23-3/8”

Ladder Height 8’, Approx. Shipping Weight 32.0 lbs.,

1FCF3 8 FT Werner OBEL08
Base Spread 53-5/8”, Bottom Width 26-7/8”

Ladder Height 10’, Approx. Shipping Weight 41.0 lbs.,

1FCF4 10 FT Werner OBEL10
Base Spread 65-7/8”, Bottom Width 30-3/8”

Ladder Height 12’, Approx. Shipping Weight 51.5 lbs.,

1FCF5 12 FT Werner OBEL12
Base Spread 78-1/4”, Bottom Width 33-7/8”

FIBERGLASS EXTENSION/TRESTLE LADDER

E7400 SERIES EXTENSION/TRESTLE LADDER
ANSI IA Twin stepladders with extendable trestle section. Patented EDGE® bracing provides enhanced
Load Capacity: 300 lbs (per side) bottom bracing strength and increased protection against damage. Aluminum external rail
shields provide additional reinforcement to the bottom.

Stepladder Height 8’, Extended Ladder Height 12’,

4XP05 8 FT Werner E7408
Base Section Width 32-3/4”, Spread 67-3/4”

Stepladder Height 10’, Extended Ladder Height 15’,

4XP06 10 ft. Werner E7410
Base Section Width 36-1/4”, Spread 81-7/8”

Stepladder Height 12’, Extended Ladder Height 19’,

4XP07 12 FT Werner E7412
Base Section Width 39-3/4”, Spread 95-7/8”

Stepladder Height 14’, Extended Ladder Height 22’,

4XP08 14 FT Werner E7414
Base Section Width 43-1/4”, Spread 109-3/4”

Stepladder Height 16’, Extended Ladder Height 26’,

4XP09 16 FT Werner E7416
Base Section Width 46-3/4”, Spread 123-3/4”

FIBERGLASS COMBINATION LADDERS

7800 SERIES FIBERGLASS COMBINATION STEP/EXTENSION LADDERS
ANSI IAA
Fiberglass combination ladders provide dual functionality in one ladder. Easily converts from
Load Capacity: 375 lbs
a stepladder to extension ladder and back. ALFLO® rung joint connections.

Stepladder Height 6’, Extended ladder working length

9-1/2’, Base Width 23-1/4’ at flared base, Stepladder
4XN76 6 FT Werner 7806
spread to outside of shoes 46-1/2”, Approx. Shipping
Weight 33.5 lbs.
Stepladder Height 7', Extended ladder working length
11-1/2'. Base Width 24-1/4" at flared base, Stepladder
6W679 7 FT Werner 7807
spread to outside of shoes 53-1/2", Approx. Shipping
Weight 37.0 lbs.
Stepladder Height 8’, Extended ladder working length
13-1/2’., Base Width 25-1/4” at flared base, Stepladder
4XN77 8 FT Werner 7808
spread to outside of shoes 60-1/2”, Approx. Shipping
Weight 40.5 lbs.

6
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ALUMINUM STEPLADDERS
400 SERIES STEPLADDER
ANSI IAA / IA Aluminum stepladder features heavy gauge aluminum Tool-Tra-Top®. All steps are knee
Load Capacity: 375 / 300 lbs braced. Slip-resistant Traction-Tred® steps. Full set of rear horizontals. Slip-resistant
foot pads.

4 FT Ladder Height 4’, Approx. Shipping Weight 16.0 lbs.,

4XN58 Werner 404
375 lbs Base Spread 30-1/8”, Bottom Width 21-1/4”

6 FT Ladder Height 6’, Approx. Shipping Weight 24.0 lbs.,

4XN59 Werner 406
375 lbs Base Spread 42-7/16”, Bottom Width 24-3/4”

8 FT Ladder Height 8’, Approx. Shipping Weight 33.5 lbs.,

4XN60 Werner 408
375 lbs Base Spread 54-3/4”, Bottom Width 28-1/4”

10 FT Ladder Height 10’, Approx. Shipping Weight 43.5 lbs.,

4XN61 Werner 410
375 lbs Base Spread 67”, Bottom Width 31-1/4”

12 FT Ladder Height 12’, Approx. Shipping Weight 54.5 lbs.,

4XN63 Werner 412
375 lbs Base Spread 79-3/8”, Bottom Width 35-1/4”

14 FT Ladder Height 14’, Approx. Shipping Weight 65.0 lbs.,

4XN64 Werner 414
300 lbs Base Spread 91-11/16”, Bottom Width 38-5/8”

16 FT Ladder Height 16’, Approx. Shipping Weight 77.5 lbs.,

4XN67 Werner 416
300 lbs Base Spread 104”, Bottom Width 42-1/8”

370 SERIES STEPLADDER

ANSI IA Aluminum stepladder features Tool-Tra-Top®. Sturdy Spill-Proof® pail shelf. Double riveted
Load Capacity: 300 lbs slip-resistant Traction-Tred® steps. Full set of rear horizontals. Unique “H” spreader with hand
grip on 4’, 5’ and 6’ for easy one-handed carry and close.

Ladder Height 3’, Approx. Shipping Weight 9.0 lbs.,

2EJG8 3 FT Werner 373
Base Spread 23-3/8”, Bottom Width 17-3/4”

Ladder Height 4’, Approx. Shipping Weight 11.0 lbs.,

4W074 4 FT Werner 374
Base Spread 29-1/2”, Bottom Width 19-1/2”

Ladder Height 5’, Approx. Shipping Weight 13.5 lbs.,

3AZX9 5 FT Werner 375
Base Spread 35-3/4”, Bottom Width 21-1/4”

Ladder Height 6’, Approx. Shipping Weight 15.5 lbs.,

3W423 6 FT Werner 376
Base Spread 41-7/8”, Bottom Width 23”

Ladder Height 8’, Approx. Shipping Weight 22.5 lbs.,

3W424 8 FT Werner 378
Base Spread 54-1/4”, Bottom Width 26-1/2”

Ladder Height 10’, Approx. Shipping Weight 31.0 lbs.,

4W172 10 FT Werner 310
Base Spread 66-1/2”, Bottom Width 30”

360 SERIES STEPLADDER

Aluminum stepladder features Tool-Tra-Top® with convenient tray for tools, paint can and
ANSI IAA
slots for paint roller tray and paint can hanger on back. Automatic Spill-Proof® pail shelf
Load Capacity: 375 lbs
that opens and closes with ladder and has slots to hold tools, rag bar and paint can. Slip-
resistant molded feet. External spreader bars.

Ladder Height 4' Approx. Ship Weight 10.5 lbs.,

41D304 4 FT Werner 364
Base Spread 29 1/4", Bottom Width 18 1/2"

Ladder Height 5' Approx. Ship Weight 12.5 lbs.,

41D305 5 FT Werner 365
Base Spread 35 1/2", Bottom Width 20"

Ladder Height 6' Approx. Ship Weight 14.5 lbs.,

41D306 6 FT Werner 366
Base Spread 41 5/8", Bottom Width 21 1/2 "

Ladder Height 8' Approx. Ship Weight 21.5 lbs.,

4GNK8 8 FT Werner 368
Base Spread 54", Bottom Width 24 1/2 "

7
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ALUMINUM TWIN STEPLADDERS

T370 SERIES TWIN STEPLADDER
ANSI IAA
Twin Stepladders are great for two-person jobs. Double riveted slip-resistant Traction-Tred®
Load Capacity: 300 lbs (per side)
steps. Full set of rear horizontals. Internal spreader bars.

Ladder Height 4', Approx. Shipping Weight 14.5 lbs.,

3AZY1 4 FT Werner T374
Base Spread 36", Bottom Width 21-1/4"

Ladder Height 6’, Approx. Shipping Weight 21.5 lbs.,

3AZY2 6 FT Werner T376
Base Spread 50”, Bottom Width 24-3/4”

Ladder Height 8’, Approx. Shipping Weight 31.0 lbs.,

3AZY3 8 FT Werner T378
Base Spread 64”, Bottom Width 28-1/4”

Ladder Height 10’, Approx. Shipping Weight 43.0 lbs.,

3AZY4 10 FT Werner T310
Base Spread 78”, Bottom Width 31-3/4”

ALUMINUM PLATFORM LADDERS

P400 SERIES PLATFORM STEPLADDER
ANSI IAA Large platform provides secure and comfortable work area with safety guard rail. Features
Load Capacity: 375 lbs 225 square inches of platform standing area. Heavy duty knee bracing on all front steps.
Shoulder bolt with locknut on top hinge.

Ladder Height 6’, Platform Height 4’, Approx. Shipping

6W686 6 FT Werner P404 Weight 25.0 lbs., Base Spread 42-1/16”, Bottom Width
24-3/4”

Ladder Height 8’, Platform Height 6’, Approx. Shipping

6W687 8 FT Werner P406 Weight 33.5 lbs., Base Spread 54-3/4”, Bottom Width
28-1/4”

Ladder Height 10’, Platform Height 8’,

6W688 10 FT Werner P408 Approx. Shipping Weight 45.5 lbs., Base Spread 79-1/2”,
Bottom Width 31-3/4”

ALUMINUM STOCKR’S® LADDERS

PT370 SERIES STOCK'RS LADDER®
ANSI IAA Large platform allows comfortable, secure work platform with safety guard rail. Pinch-
Load Capacity: 300 lbs (per side) Proof™ platform is designed for easy opening and folding. Easy to handle and folds to a
10” width for storage

Ladder Height 6’, Platform Height 4’, Approx. Shipping

3AZY7 6 FT Werner PT374 Weight 27.0 lbs., Base Spread 50-1/2”, Bottom Width
24-3/4”

Ladder Height 8’, Platform Height 6’, Approx. Shipping

3AZY8 8 FT Werner PT376 Weight 36.0 lbs., Base Spread 65-1/4”, Bottom Width
28-1/4”

Ladder Height 10’, Platform Height 8’,

3AZY9 10 FT Werner PT378 Approx. Shipping Weight 46.5 lbs., Base Spread 81-1/2”,
Bottom Width 34-1/4”

8
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ALUMINUM UTILITY LADDERS

MODEL 244 ALUMINUM UTILITY LADDER
ANSI III
Lightweight - easy to open and close. Features comfortable tubular rails, slip-resistant steps,
Load Capacity: 200 lbs
and mar-resistant feet. Compact for convenient storage - folds to 3”

4XN47 3.5 FT Werner 244 Rail Length is 3-1/2’; Second step is at 23”

ALUMINUM PLATFORM UTILITY

260 SERIES PLATFORM UTILITY LADDER
ANSI III
Spill-Proof® pail holder with rag rail. Large comfortable slip-resistant platform. Mar-resistant
Load Capacity: 200 lbs
feet. Compact for convenient storage - folds to 3-1/2”.

Ladder Height 4.5’, Platform Height

4XN54 4.5 FT Werner 264 22.5, Approx. Shipping Weight 11.5 lbs.
Base spread 25-1/2”, Bottom Width 20”

Ladder Height 5.5’, Platform Height

4XN55 5.5 FT Werner 265 33.5”, Approx. Shipping Weight 15.0 lbs.,
Base Spread 33-1/4”, Bottom Width 21-1/2”

ALUMINUM TELESCOPING MULTIPURPOSE LADDERS

MT SERIES TELESCOPING MULTILADDER
ANSI IA Easily converts into 4 positions - Twin Stepladder, Stairway Ladder, Extension Ladder,
Load Capacity: 300 lbs 2-Scaffold Bases. Smooth curved rails for comfortable climbing. Double riveted steps for
long lasting durability. Extra wide flared bottom for firm support. Slip-resistant feet.

Stepladder Height = 3’ to 5’
Extension Ladder Height = 7’ to 11’
2NKW6 13 FT Werner MT-13 Stairway Ladder Height = 3’ to 5’
Scaffold Position Length = 1’ to 2’
Weight = 31.6 lbs.

Stepladder Height = 4’ to 7’
Extension Ladder Height = 9’ to 15’
2NKW7 17 FT Werner MT-17 Stairway Ladder Height = 4’ to 7’
Scaffold Position Length = 1’ to 3’
Weight = 39.6 lbs.

Stepladder Height = 5’ to 9’
Extension Ladder Height = 11’ to 19’
2NKW8 22 FT Werner MT-22 Stairway Ladder Height = 5’ to 9’
Scaffold Position Length = 1’ to 4’
Weight = 47.0 lbs.

Stepladder Height = 6’ to 11’

Extension Ladder Height = 13’ to 23’
2NKW9 26 FT Werner MT-26 Stairway Ladder Height = 6’ to 11’
Scaffold Position Length = 1’ to 5’
Weight = 62.6 lbs.

9
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS EXTENSION LADDERS

D7100-2 SERIES EXTENSION LADDER
ALFLO® rung joints for Twist-Proof® performance. Rung plate connection for easy rung
ANSI IAA / IA
replacement. Slip-resistant Traction-Tred® D-rungs. Combination
CROSS-REFERENCE CATALOGshoes with slip-resistant
Load Capacity: (375 / 300 lbs as noted)
rubber pads for hard surfaces or swivel the shoe to use the spur plates for penetrable
Grainger
Item #
surfaces. Note:
Height Model16’
# No. 4XN97 is not equipped with rope and pulley.
Description

16 FT Ladder Height 16’, Maximum Working Length 13’,

4XN97 Werner D7116-2 ALUMINUM EXTENSION LADDERS
375 lbs Approx. Shipping Weight 41.0 lbs.

20 FT Ladder Height 20’, Maximum Working

D1500-2 SERIES Length
EXTENSION17’,LADDER
4XN98 Werner D7120-2 Aluminum extension ladders with ALFLO® direct rung-to-rail connections for Twist-Proof® performance.
375 lbs Approx.
ANSI IA Shipping Weight Stacked
50.0 lbs.
rail design so base and fly are same width and separate easily for use as an extension or two
Load Capacity: 300 lbs single sections. Rugged shoe rests flat or is held in spur position with Shu-Lok® feature. Ladder is
24 FT Ladder Height 24’, Maximum Working
constructed withLength 21’,and mar-resistant end caps. Extruded aluminum gravity spring locks.
I-beam rails
4XN99 Werner D7124-2
375 lbs Approx. Shipping Weight Note:
58.516'
lbs.
Item 4XN89 is not equipped with rope and pulley.

Rung-plate
28 FT Ladder Height 28’, Maximum
LadderWorking
Height 16',Length
Maximum25’, connection
4XP01 Werner D7128-2
4XN89 16 FT Werner D1516-2
Working Length 13', Approx. Shipping
375 lbs Approx. Shipping WeightWeight
67.0 30.5
lbs.lbs.

32 FT Ladder Height 32’, Maximum Working Length 29’,

4XP02 Werner D7132-2
375 lbs 4XN90 20 Approx.
FT Shipping WeightLadder
Werner D1520-2 82.5 Height
lbs. 20', Maximum Working Length 17', Approx. Shipping
Weight 37.0 lbs.

40 FT Ladder Height 40’, Maximum Working Length 35’,

3W621 Werner D7140-2
300 lbs Approx. Shipping Weight 126.5 lbs.
Ladder Height 24', Maximum Working Length 21', Approx. Shipping
4XN91 24 FT Werner D1524-2
Weight 45.0 lbs.
D6200-2 SERIES EXTENSION LADDER
ALFLO® rung joints for Twist-Proof® performance. Direct rung to rail connections. Slip-
ANSI IA
resistant Traction-Tred® Ladder
rungs. Combination
Height shoesLength
28', Maximum Working with 25',
slip-resistant
Approx. Shippingrubber pads for hard
Load Capacity: 300 lbs4XN92 28 FT Werner D1528-2
surfaces or swivel the shoe
Weightto use
56.0 lbs. the spur plates for penetrable surfaces.
Note: 16’ Item 3W620 CROSS-REFERENCE
is not equipped with rope and pulley.
CATALOG
Grainger
4XN93 Ladder
Item #
32 FT Height
Height
Werner 16’,
Model #
Maximum
D1532-2
LadderWorking
Height 32', Length13’,
Maximum Working Length 29', Approx. Shipping
Description

3W620 16 FT Werner D6216-2 Weight 67.0 lbs.

Approx. Shipping Weight
ALUMINUM EXTENSION LADDERS
36.5 lbs.

Ladder Height 20’, Maximum Working Length 17’,

D1500-2 SERIES EXTENSION LADDER
3W184 20 FT Werner D6220-2 36 Approx.
Ladder
Aluminum Height
extension 36',
ladders withMaximum
ALFLO® direct Working
rung-to-railLength 32',
connections for Approx. Shipping
Twist-Proof® performance.
4XN94 FT Shipping
Werner
ANSI IA
Load Capacity: 300 lbs Weight
D1536-2 44.5 lbs.lbs.
Stacked rail design so base and fly are same width and separate easily for use as an extension or two
singleWeight
sections. 80.0
Rugged shoe rests flat or is held in spur position with Shu-Lok® feature. Ladder is
constructed with I-beam rails and mar-resistant end caps. Extruded aluminum gravity spring locks.
Note: 16' Item 4XN89 is not equipped with rope and pulley.
Ladder Height 24’, Maximum Working Length 21’,
3W139 24 FT Werner D6224-2
4XN95
Approx.
4XN89
40 FT
16 FT Shipping Weight
Werner D1516-2 52.0 Height
Ladder
Werner D1540-2 Weight 30.5 lbs.
lbs. 40', Maximum Working Length 35', Approx. Shipping
Ladder Height 16', Maximum Working Length 13', Approx. Shipping

Weight 89.5 lbs. ALFLO®

Ladder Height 28’, Maximum Working Length 25’,Shipping Rung-to-Rail
3W140 28 FT Werner D6228-2 20 FT4XN90Werner D1520-2
Ladder Height 20', Maximum Working Length 17', Approx.
connection
Approx.
ALUMINUM Shipping
EXTENSION Weight
LADDERS 59.5 lbs.
Weight 37.0 lbs.

WITH LEVELERS
Ladder Height 32’, Maximum
Weight 45.0 lbs.Working Length 29’,
Ladder Height 24', Maximum Working Length 21', Approx. Shipping
4XN91 24 FT Werner D1524-2
3W185 32 FT Werner D6232-2
Approx. Shipping Weight D1800-2EQ 71.5 lbs. SERIES ALUMINUM EQUALIZER EXTENSION LADDER
ANSI Ladder Exclusive ALFLO® rung 25',joint
Approx. means
Shipping Twist-Proof® performance. Slip-resistant Traction-Tred® D-rungs.
28 IFT
Height 28', Maximum Working Length
4XN92 Werner D1528-2
Weight Factory
56.0 lbs. installed adjustable EverLevel® leveling system exceeds OSHA and ANSI requirements. Easily
Ladder Height 40’, Maximum
Load Capacity: 250 lbs
Working
adjustable in 3/8"Length
increments 35’,up to 8-1/4". Dual action foot for use on hard or penetrable surfaces.
4XP10 40 FT Werner D6240-2
Approx.
4XN93 32 FT
Shipping Weight
Werner D1532-2
Ladder 88.5
Height 32',lbs.
Note: 16' Item 1FCF6 is not equipped with rope and pulley.
Maximum Working Length 29', Approx. Shipping
Weight 67.0 lbs.

Ladder Height 36', Maximum Working Length 32', Approx. Shipping

4XN94 36 FT Werner D1536-2 Ladder Height 16', Maximum Working Length 13', Approx. Shipping
1FCF6 16 FT Werner D1816-2EQWeight 80.0 lbs.
ALUMINUM EXTENSION LADDERS WITH LEVELERS Weight 31.5 lbs. (Does not include rope & pulley)
Ladder Height 40', Maximum Working Length 35', Approx. Shipping
4XN95 40 FT Werner D1540-2
Weight 89.5 lbs.

D1800-2EQ SERIES ALUMINUM EQUALIZER EXTENSION LADDER

Exclusive WITHALFLO
®
ALUMINUM EXTENSION LADDERS
rung joint means Twist-Proof® performance. Slip-resistant Traction-Tred®
ANSI I 20 D-rungs.
LEVELERS
Ladder Height 20', Maximum Working ® Length 17', Approx. Shipping
1FCF7 FT Factory
Werner installed
D1820-2EQ adjustable EverLevel EXTENSION leveling system exceeds OSHA and ANSI
Load Capacity: 250 lbs Weight
D1800-2EQ 37.5
SERIES lbs. EQUALIZER
ALUMINUM LADDER

requirements.
ANSI I
Load Capacity: 250 lbs
Easily adjustable in 3/8” increments upOSHA to and
8-1/4” . Dual Easily
Exclusive ALFLO® rung joint means Twist-Proof® performance. Slip-resistant Traction-Tred® D-rungs.
Factory installed adjustable EverLevel® leveling system exceeds ANSI requirements. action foot for use on
hard or penetrable surfaces. Note:
Note: 16' Item 1FCF6 16’ Item
is not equipped 1FCF6
with rope and pulley. is not equipped with rope and pulley.
adjustable in 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces.

Ladder Height 16’, Maximum LadderWorking 24',Length 13’, Approx.

1FCF6 16 FT Werner D1816-2EQ
Ladder Height 16', Maximum Working Length 13', Approx. Shipping
1FCF6 16 FT Werner D1816-2EQ Height Maximum Working Length 21', Approx. Shipping
1FCF8 Shipping
24 FT
Weight 31.5 lbs.Weight (Does 45.5notlbs.include rope & pulley)
Werner D1824-2EQWeight 31.5 lbs. (Does not include rope & pulley)

Ladder Height 20’, Maximum Working Length 17’,Shipping

1FCF7 20 FT Werner D1820-2EQ 1FCF7 20 FT Werner D1820-2EQ
Ladder Height 20', Maximum Working Length 17', Approx.

Approx. Shipping Weight 37.5 lbs.

Weight 37.5 lbs.

Ladder Height 28', Maximum Working Length 25', Approx. Shipping

1FCF9 28 FT
Ladder Werner
HeightD1828-2EQ
24’, Maximum WeightWorking
56.0 lbs. Length 21’,
1FCF8 24 FT Werner D1824-2EQ Ladder Height 24', Maximum Working Length 21', Approx. Shipping
Approx. Shipping Weight 45.5 lbs.
1FCF8 24 FT Werner D1824-2EQ
Weight 45.5 lbs.

Ladder Height 28’, Maximum Working Length 25’,

1FCF9 28 FT Werner D1828-2EQ Ladder Height 28', Maximum Working Length 25', Approx. Shipping
Approx.
1FCF9 28 FT
Shipping Weight
Werner D1828-2EQ
Weight 56.0
56.0 lbs. lbs.

10
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ALUMINUM EXTENSION LADDERS

D1500-2 SERIES EXTENSION LADDER
Aluminum extension ladders with ALFLO® direct rung-to-rail connections for Twist-Proof®
ANSI IA performance. Stacked rail design so base and fly are same width and separate easily for use
Load Capacity: 300 lbs as an extension or two single sections. Rugged shoe rests flat or is held in spur position with
Shu-Lok® feature. Ladder is constructed with I-beam rails and mar-resistant end caps. Extruded
aluminum gravity spring locks. Note: 16’ Item 4XN89 is not equipped with rope and pulley.

Ladder Height 16’, Maximum Working Length 13’,

4XN89 16 FT Werner D1516-2
Approx. Shipping Weight 30.5 lbs.

Ladder Height 20’, Maximum Working Length 17’,

4XN90 20 FT Werner D1520-2
Approx. Shipping Weight 37.0 lbs.

Ladder Height 24’, Maximum Working Length 21’,

4XN91 24 FT Werner D1524-2
Approx. Shipping Weight 45.0 lbs.

Ladder Height 28’, Maximum Working Length 25’,

4XN92 28 FT Werner D1528-2
Approx. Shipping Weight 56.0 lbs.

Ladder Height 32’, Maximum Working Length 29’,

4XN93 32 FT Werner D1532-2
Approx. Shipping Weight 67.0 lbs.

Ladder Height 36’, Maximum Working Length 32’,

4XN94 36 FT Werner D1536-2
Approx. Shipping Weight 80.0 lbs.

Ladder Height 40’, Maximum Working Length 35’,

4XN95 40 FT Werner D1540-2
Approx. Shipping Weight 89.5 lbs.

FIBERGLASS LIGHTWEIGHT EXTENSION LADDERS

D7200-2 SERIES EXTENSION LADDER
Lightweight Fiberglass Extension Ladder provides same duty rating but lighter carryweight.
ANSI IAA
ALFLO® rung joints for Twist-Proof® performance. Rung plate connection for easy rung
Load Capacity: 375 lbs.
replacement. Slip-resistant Traction-Tred® D-Rungs. Combination shoes with slip-resistant
rubber pads for hard surfaces or swivel the shoes to use spur plates for penetrable surfaces.

Ladder Height 16', Maximum Working Length 13',

36FX58 16 FT Werner D7216-2
Approx. Ship Weight 36 lbs.

Ladder Height 20', Maximum Working Length 17',

36FX59 20 FT Werner D7220-2
Approx. Ship Weight 44 lbs.

Ladder Height 24', Maximum Working Length 21',

36FX60 24 FT Werner D7224-2
Approx. Ship Weight 51 lbs.

Ladder Height 28', Maximum Working Length 25',

36FX61 28 FT Werner D7228-2
Approx. Ship Weight 58 lbs.

D6400-2 SERIES EXTENSION LADDER

Lightweight Fiberglass Extension Ladder provides same duty rating but lighter carryweight.
ANSI IA
ALFLO® rung joints for Twist-Proof® performance. Direct Rung to Rail connections. Slip-resistant
Load Capacity: 300 lbs
Traction-Tred® D-Rungs. Combination shoes with slip-resistant rubber pads for hard surfaces or
swivel the shoes to use spur plates for penetrable surfaces.

Ladder Height 16', Maximum Working Length 13',

36FX54 16 FT Werner D6416-2
Approx. Ship Weight 32 lbs.

Ladder Height 20', Maximum Working Length 17',

36FX55 20 FT Werner D6420-2
Approx. Ship Weight 40 lbs.

Ladder Height 24', Maximum Working Length 21',

36FX56 24 FT Werner D6424-2
Approx. Ship Weight 46 lbs.

Ladder Height 28', Maximum Working Length 25',

36FX57 28 FT Werner D6428-2
Approx. Ship Weight 53 lbs.

11
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS EXTENSION LADDERS WITH LEVELERS

D7100-2LV SERIES EXTENSION LADDER
Fiberglass D-rung extension ladder with rung plate rung-to-rail connections. Factory
ANSI IAA installed LeveLok® Levelers enable ladder to adapt to uneven terrain with simple foot action,
Load Capacity: 375 lbs. Leveler extends up to 10” in 3/16” increments. Pre-pierced holes at top of ladder for easy field
installation of accessories. Base and fly separate easily to use base section as single ladder.
Ideal for utility and telecommunication industries.
Ladder Height 20’, Approx. Shipping Weight 58.0 lbs.
3AZT2 20 FT Werner D7120-2LV Maximum Working Length 17’, Outside Shoe Base
Width 22-3/4”
Ladder Height 24’, Approx. Shipping Weight 66.5 lbs.
3AZT3 24 FT Werner D7124-2LV Maximum Working Length 21’, Outside Shoe Base
Width 22-3/4”
Ladder Height 28’, Approx. Shipping Weight 75.0 lbs.
3AZT4 28 FT Werner D7128-2LV Maximum Working Length 25’, Outside Shoe Base
Width 22-3/4”

ALL FIBERGLASS EXTENSION LADDERS

9500 FIBERMAX EXTENSION LADDER
ANSI IA Fiberglass rungs connected to fiberglass box-beam rails. Rail and rung are connected with
Load Capacity: 300 lbs. reinforced nylon plugs that interlock the entire system. Thick rubber treads and convenient
spur plates.
Ladder Height 16’, Approx. Shipping Weight 41.0 lbs.
3AZT5 16 FT Werner 9516-2 Maximum Working Length 13’, Outside Shoe Base
Width 18-3/8”
Ladder Height 20’, Approx. Shipping Weight 49.0 lbs.
3AZT6 20 FT Werner 9520-2 Maximum Working Length 17’, Outside Shoe Base
Width 18-3/8”
Ladder Height 24’, Approx. Shipping Weight 56.0 lbs.
3AZT7 24 FT Werner 9524-2 Maximum Working Length 21’, Outside Shoe Base
Width 18-3/8”
Ladder Height 28’, Approx. Shipping Weight 64.0 lbs.
3AZT8 28 FT Werner 9528-2 Maximum Working Length 25’, Outside Shoe Base
Width 18-3/8”
Ladder Height 32’, Approx. Shipping Weight 72.0 lbs.
3AZT9 32 FT Werner 9532-2 Maximum Working Length 29’, Outside Shoe Base
Width 18-3/8”

FIBERGLASS 3-SECTION COMPACT EXTENSION LADDERS

D6200-3 SERIES FIBERGLASS COMPACT EXTENSION LADDER
Innovative 3 section design reduces to shorter than standard 2 section design. Convenient
ANSI IA to maneuver and carry around. Easy to transport on top of vehicles. ALFLO® rung joints for
Load Capacity: 300 lbs. Twist-Proof® performance. Spring locks operate smoothly. Shoe with slip-resistant pad and
spur plate. Retainer strap secures ladder for storage and transport.
Note: 16’ Item 22E977 is not equipped with rope and pulley.

Ladder Height 16', Total Length of sections 18', Maximum

22E977 16 FT Werner D6216-3
Working Length 13', Approx. shipping weight 40.5 lbs.

Ladder Height 20', Total Length of sections 23', Maximum

22E978 20 FT Werner D6220-3
Working Length 17', Approx. shipping weight 54 lbs.

Ladder Height 24', Total Length of sections 27', Maximum

22E979 24 FT Werner D6224-3
Working Length 21', Approx. shipping weight 61.0 lbs.

Ladder Height 28', Total Length of sections 31', Maximum

22E980 28 FT Werner D6228-3
Working Length 25', Approx. shipping weight 74.5 lbs.

Ladder Height 32', Total Length of sections 35',Maximum

22E981 32 FT Werner D6232-3
Working Length 29', Approx. shipping weight 81 lbs.

12
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

FIBERGLASS STRAIGHT LADDERS

D6200-1 SERIES FIBERGLASS STRAIGHT LADDERS
ANSI IA
ALFLO® rung joint means Twist-Proof® performance. Slip-resistant Traction-Tred® round
Load Capacity: 300 lbs
rungs. Double rail shield bracket and shoe with Shu-Lok® slip-resistant pad and spur plate.

Ladder Height 8’, Base Width 19”, Approx. Shipping

2EJG2 8 FT Werner D6208-1
Weight 19.5 lbs.
Ladder Height 10’, Base Width 19”, Approx. Shipping
2EJG3 10 FT Werner D6210-1
Weight 23.0 lbs.
Ladder Height 12’, Base Width 19”, Approx. Shipping
2EJG4 12 FT Werner D6212-1
Weight 27.0 lbs.
Ladder Height 14’, Base Width 19”, Approx. Shipping
2EJG5 14 FT Werner D6214-1
Weight 31.0 lbs.
Ladder Height 16’, Base Width 19”, Approx. Shipping
2EJG6 16 FT Werner D6216-1
Weight 37.0 lbs.
Ladder Height 20’, Base Width 19”, Approx. Shipping
2EJG7 20 FT Werner D6220-1
Weight 45.5 lbs.

ALUMINUM STRAIGHT LADDERS

D1500-1 SERIES SINGLE LADDER
ANSI IA Aluminum single ladders with ALFLO® direct rung-to-rail connections for Twist-Proof®
Load Capacity: 300 lbs performance. Rugged shoe rests flat or is held in spur position with Shu-Lok® feature.
Ladder is constructed with I-beam rails and mar-resistant end caps.

Ladder Height 8’, Approx. Shipping Weight 14.5 lbs.

3AZU7 8 FT Werner D1508-1
Base Width 18-1/8” outside rails
Ladder Height 10’, Approx. Shipping Weight 17.5 lbs.
3AZU8 10 FT Werner D1510-1
Base Width 18-1/8” outside rails
Ladder Height 12’, Approx. Shipping Weight 21.5 lbs.
3AZU9 12 FT Werner D1512-1
Base Width 18-1/8” outside rails
Ladder Height 14’, Approx. Shipping Weight 27.0 lbs.
3AZV1 14 FT Werner D1514-1
Base Width 18-1/8” outside rails
Ladder Height 16’, Approx. Shipping Weight 32.5 lbs.
3AZV2 16 FT Werner D1516-1
Base Width 18-1/8” outside rails
Ladder Height 18’, Approx. Shipping Weight 38.5 lbs.
3AZV3 18 FT Werner D1518-1
Base Width 18-1/8” outside rails

FIBERGLASS MANHOLE LADDERS

M7100 SERIES MANHOLE LADDER
Fiberglass straight ladders 12” wide. ALFLO® direct rung-to-rail connections for Twist-Proof®
ANSI IA
performance. Mar-resistant, vinyl coated aluminum hoop end caps for removing ladder from
Load Capacity: 300 lbs
manhole. 3’ replaceable plastic sleeves to avoid manhole rim damage to rail Combination
rail shield and shoe protects bottom of rail from damage.

Ladder Height 8’, Approx. Shipping Weight 20.0 lbs.

3AZV4 8 FT Werner M7108-1
Base Width 12-3/8”
Ladder Height 10’, Approx. Shipping Weight 24.0 lbs.
3AZV5 10 FT Werner M7110-1
Base Width 12-3/8”
Ladder Height 12’, Approx. Shipping Weight 28.0 lbs.
3AZV6 12 FT Werner M7112-1
Base Width 12-3/8”
Ladder Height 14’, Approx. Shipping Weight 32.0 lbs.
3AZV7 14 FT Werner M7114-1
Base Width 12-3/8”
Ladder Height 16’, Approx. Shipping Weight 39.5 lbs.
3AZV8 16 FT Werner M7116-1
Base Width 12-3/8”

13
 CROSS-REFERENCE CATALOG

CROSS-REFERENCE CATALOG
Grainger
CROSS-REFERENCE
CROSS-REFERENCE CATALOG
CATALOG
Grainger Height Model # Description
GraingerItem # Height
Item #
Model # Description
Grainger Height Model # Description
Item # Height Model # Description
Item #
STEP STOOLS
STEP STOOLS
STEP STOOLS
STEP STOOLS
ANSI IA
ANSI IA
ANSI IA ALUMINUM AND FIBERGLASS STEP STOOLS
Load Capacity:
ANSI IA 300 lbs ALUMINUM AND FIBERGLASS STEP STOOLS
Load Load Capacity:
Capacity: 300 lbs 300 lbs ALUMINUM
ALUMINUMAND
ANDFIBERGLASS
FIBERGLASSSTEP
STEPSTOOLS
STOOLS
Load Capacity: 300 lbs

Aluminum Step Stool

Aluminum
Large Aluminum
Step
molded
Aluminum Step Step Stool
topStool
provides
Stool large standing platform. Molded vinyl foot
4XN38 2 FT Werner 150B Large molded
4XN38 2 FT Werner 150B pads Largetotop
Largeriveted
molded
provides
molded
rail.
top toplarge
Spread
provides 19".
large
standing
provides
Width 17".platform.
large
standing platform.
Molded
standing
Molded
vinyl foot
platform. Mold-
vinyl foot
4XN38
4XN38 2 FT 2 FT Werner150B
Werner 150B pads riveted to rail.Weight
Spread5.5
19". Width 17".
Approx.edShipping
vinyl
pads riveted footSpread
to rail. pads riveted
lbs.
19". to 17".
Width rail. Spread 19”. Width 17”.
Approx. Shipping Weight 5.5 lbs.
Approx.Approx.
ShippingShipping
Weight 5.5Weight
lbs. 5.5 lbs.

Fiberglass
Fiberglass Step Stool
Step Stool
Large Large
Fiberglass
molded
Fiberglass molded
Step
topStool
Step top large
provides
Stool provides large
standing standing
platform. platform.rail
Combination
3AZU6 2 FT Werner 6202
3AZU6
3AZU6 2 FT 2 FT Werner
Werner 6202
6202
Large
end
Large Combination
molded
shield andtop
molded foot
top railslip-resistant
provides
with
provides end
largeshield
standingandplatform.
foot
large standing footSpread
pad. with
platform. slip-resistant
Combination
rail foot
is 19-1/2".rail
Combination
3AZU6 2 FT Werner 6202 end shield and foot with slip-resistant foot9.0
pad.
lbs.Spread is 19-1/2".
Width pad. Spread
17-1/4".
end shield and Approx.isShipping
foot with 19-1/2”. Width
Weight
slip-resistant foot17-1/4”.
pad. Approx.
Spread Shipping
is 19-1/2".
Width 17-1/4". Approx. Shipping Weight 9.0 lbs.
Weight Approx.
Width 17-1/4". 9.0 lbs.Shipping Weight 9.0 lbs.

AluminumAluminum
Twin StepTwin Step Stool
Stool 300 lbs. 300
Dutylbs. Duty(per
Rating Rating
side)(per
Aluminum
Designed
Aluminumside) Twin
for one
Twin Designed
Step
or two
Step for one
Stool
person
Stool
300 or
lbs.
jobs.
300 two
Duty
Ideal
lbs. person
DutyforRatingjobs.
(per
use with
Rating Ideal
side)
stage
(per for use
planks.
side)
4XP46 2 FT Werner T372
4XP46
4XP46 2 FT 2 FT Werner
Werner T372
T372
Designed
Folds with
to
Designed 7-forstage
one orplanks.
oneWide.
1/4"
for
or twoBase Folds
person jobs.
Spread
two person to23-3/8".
jobs. 7- 1/4”
Ideal
Ideal
for
forWide. Base
use with
Bottom
use with
stage
Width Spread
stage
planks.
21-1/4".
planks.
4XP46 2 FT Werner T372 Folds to23-3/8”.
Approx. 7- Bottom
1/4" Wide.
Shipping Width
Base
Weight lbs.21-1/4”.
Spread
9.0 23-3/8".Approx.
Bottom Shipping Weight
Width 21-1/4".
Folds to 7- 1/4" Wide. Base Spread 23-3/8". Bottom Width 21-1/4".
Approx.9.0
Shipping
lbs. Weight 9.0 lbs.
Approx. Shipping Weight 9.0 lbs.

Fiberglass
Fiberglass Twin
Twin Step Step Stool
Stool 300 lbs.300
Dutylbs.Rating
Duty Rating (per side)
(per side)
Designed
Fiberglass Twin fortwo
oneStep one
Stoolor two
300 person
lbs. Dutyjobs. Ideal
Rating forside)
(per use with
4XP47 2 FT 2 FT Werner
Werner T6202
T6202
Designed
Fiberglass forTwin or
Step person
Stool jobs.
300 Ideal
lbs. Dutyfor use with
Rating stage
(per planks.
side)
4XP47
2 FT Werner T6202
Designed
Folds stage
to
Designed 7for
1/2"
for planks.
one or two
Wide.
one or twoFolds
person
Base tojobs.
7 1/2”
Spread
person Wide.
Ideal
23-3/8",
jobs. Ideal Base
forBottom
use
for use Spread
with stage
Width
with 23-3/8”,
planks.
21-1/4".
stage planks.
4XP47
4XP47 2 FT Werner T6202 Folds toBottom
Approx. 7Shipping Width
1/2" Wide. 21-1/4”.
Base
Weight Approx.
Spread
11.5 lbs. 23-3/8", Shipping Weight
Bottom Width 11.5 lbs.
21-1/4".
Folds to 7 1/2" Wide. Base Spread 23-3/8", Bottom Width 21-1/4".
Approx. Shipping Weight 11.5 lbs.
Approx. Shipping Weight 11.5 lbs.

STEP STANDS
STEP STANDS
STEP STANDS
STEP STANDS
ANSI IAA ALUMINUM AND FIBERGLASS STEP STANDS
ALUMINUMduty AND FIBERGLASS STEP STANDS
ANSI IAA 375 lbs
Load Capacity:
ANSI ANSI
IAA IAA
Heavy ALUMINUM
ALUMINUM 6"
ANDwide AND
frontFIBERGLASS
rails and
FIBERGLASS STEP STEP
steps. ExtraSTANDS
STANDS wide top. Spreader bars lock permanently open.
Heavy
Extra duty
duty6"
large wide
feet front
for6”
use rails
on and
gratings.steps. Extra wide top.
top.Spreader bars lock
lockpermanently open.
Load Capacity:
LoadLoad
Capacity:
375 lbs
375 lbs375 lbs Heavy Heavy duty
6" wide wide
front front
rails andrails and
steps. steps.
Extra Extra
wide wide top.bars
Spreader Spreader bars lock permanently
permanently open.
Capacity: Extra large
largefeet
Extraopen. feet for use
useon
forlarge on gratings.
gratings.
Extra feet for use on gratings.

Aluminum. Ladder Height 2', Approx. Shipping Weight 16.0 lbs.

5W216 2 FT Werner SSA02 Aluminum. Ladder Height Width
2', Approx.
5W216 2 FT Werner SSA02 Base Spread
Aluminum. 21", Bottom
Ladder 17" Shipping
Height 2', Approx.
Weight 16.0 lbs.
Shipping Weight 16.0 lbs.
5W216 2 FT Werner SSA02 Base Spread 21", Bottom Width 17"
Aluminum. Ladder Height 2’, Approx. Shipping Weight
Base Spread 21", Bottom Width 17"
5W216 2 FT Werner SSA02
16.0 lbs. Base Spread 21”, Bottom Width 17”

Aluminum. Ladder Height 3'. Approx. Shipping Weight 21.0 lbs.

6W705 3FT Werner SSA03 Aluminum. Ladder Height 3'. Approx. Shipping Weight 21.0 lbs.
6W705 3FT Werner SSA03 Base Spread
Aluminum. 27-1/2",
Ladder Bottom
Height Width 18-3/4"
3'. Approx. Shipping Weight 21.0 lbs.
6W705 3FT Werner SSA03 Base Spread 27-1/2",
Aluminum. BottomHeight
Ladder Width 18-3/4"
Base Spread 27-1/2", Bottom Width 3’. Approx. Shipping Weight
18-3/4"
6W705 3FT Werner SSA03
21.0 lbs. Base Spread 27-1/2”, Bottom Width 18-3/4”

Fiberglass. Ladder Height 2'. Approx. Shipping Weight 15.0 lbs.

3LW39 22 FT2 Werner SSF02 Fiberglass. Ladder Height Width
2'. Approx.
3LW39 22 FT2 Werner SSF02 Base Spread
Fiberglass. 21", Bottom
Ladder 17" Shipping
Height 2'. Approx.
Weight 15.0 lbs.
Shipping Weight 15.0 lbs.
3LW39 22 FT2 Werner SSF02 Fiberglass.
Base Spread Ladder
21", Bottom WidthHeight
17" 2’. Approx. Shipping Weight
3LW39 22 FT Werner SSF02 Base Spread 21", Bottom Width 17"
15.0 lbs. Base Spread 21”, Bottom Width 17”

Fiberglass. Ladder Height 3'. Approx. Shipping Weight 19.5 lbs.

3LW40 33 FT Werner SSF03 Fiberglass. Ladder Height 3'. Approx. Shipping Weight 19.5 lbs.
Base Spread
Fiberglass. 27-1/2", Bottom
3'. Width 18-3/4"
3LW40
3LW40
33 FT Werner SSF03 Fiberglass.
27-1/2",Ladder
Ladder
Bottom Height
Height Approx.3’.Shipping
Approx. Shipping
Weight Weight
19.5 lbs.
3LW40 33 FT33 FT Werner
WernerSSF03
SSF03 Base Spread
Base Spread 27-1/2", Bottom
Width 18-3/4"
Width 18-3/4"
19.5 lbs. Base Spread 27-1/2”, Bottom Width 18-3/4”

14
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

PORTABLE WORK STANDS

ALUMINUM AND FIBERGLASS PORTABLE WORK STANDS

ANSI IA 30” wide work stands with double wide top steps to provide wide platform. External Pinch-
Load Capacity: 300 lbs (per side) Proof™ spreaders for easy opening and closing. Mar-resistant feet for slip-resistance on
concrete, wood and vinyl floors.

Aluminum. Ladder Height 2’. Approx. Shipping Weight

3AZU1 2 FT Werner TW372-30
12.5 lbs. Base Spread 22”, Bottom Width 23”

Aluminum. Ladder Height 3’. Approx. Shipping Weight

3AZU2 3 FT Werner TW373-30
17.5 lbs. Base Spread 29”, Bottom Width 34-3/4”

Aluminum. Ladder Height 4’. Approx. Shipping Weight

3AZU3 4 FT Werner TW374-30
24.0 lbs. Base Spread 36”, Bottom Width 36-1/2”

Fiberglass. Ladder Height 2’. Approx. Shipping Weight

3AZU4 2 FT Werner TW6202
17.0 lbs. Base Spread 22-1/4”, Bottom Width 31-1/4”

Fiberglass. Ladder Height 3’. Approx. Shipping Weight

3AZU5 3 FT Werner TW6203
24.0 lbs. Base Spread 29-3/4”, Bottom Width 31-3/4”

SCAFFOLDING
Aluminum and Steel Scaffolding

Rolling Portable Steel Scaffold

Folds easily for storage and portability. Rolls easily on 4”
4ZY17 4 FT Werner PS-48
non-marring hi-grade casters. Has 2 adjustable height
planks. 500 lbs. Duty Rating (250 lbs. per plank).

Narrow Span 6’ Adjustable Aluminum Base Section

6’ Long x 29” Wide. Height adjusts from 6’6” to 7’6”. Load
4XN62 6 FT Werner 4101 Capacity 25 lbs. per square foot or 500 lbs. maximum
per deck and scaffold. Includes walk board and 5” swivel
locking casters.

Narrow Span 6’ Aluminum Scaffold Guard Rail Section

4XP11 6 FT Werner 4110
6’ Long x 29” Wide x 3-1/2’ High.

15
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

SCAFFOLDING continued
Aluminum Scaffold Towers

12’ HIGH ALUMINUM SCAFFOLD TOWER

6’ Long x 29” Wide x 12’ High Aluminum Scaffold Tower.
4XP22 12 FT Werner GW401 Load Capacity 25 lbs. per square foot or 500 lbs.
maximum per deck and scaffold. Includes walk board,
5” swivel locking casters, outriggers and toeboards.

15’ HIGH ALUMINUM SCAFFOLD TOWER

6’ Long x 29” Wide x 15’ High Aluminum Scaffold Tower.
4XP23 15 FT Werner GW402 Load Capacity 25 lbs. per square foot or 500 lbs.
maximum per deck and scaffold. Includes walk board,
5” swivel locking casters, outriggers and toeboards.

Aluminum Work Platform. 225 lbs. Load Capacity

20 Portable and lightweight. Folds easily for storage. Highest
4ZY18 Werner AP-20-MP6
Inches Standing Level 20-9/16”. Width 16-5/8”, Length 40”.
Approx. Shipping Weight 75.0 lbs.(6)

Pro Deck Aluminum Platform. 300 lbs. Load Capacity

Extra large standing area with a rigid surface for working
from side to side. The Pro Deck is ideal for working along
walls and windows. Platform legs lock securely in place
21
36FX62 Werner AP-30 when in use and fold underneath platform for compact
Inches
storage. The 300 lbs load capacity provides addition-
al support for jobs requiring extra tools and supplies.
Highest Standing Level 20-9/16". Width 16". Length 48".
Approx. Shipping Weight 16.0 lbs.

PLANKS
ALUMINUM EXTENSION PLANKS
ANSI IA
Planks are 14” Wide. For use on stepladders, telescoping multiladders, extension trestle
Load Capacity: 250 lbs (1 person)
ladders, and extension and single ladders equipped with ladder jacks.

Closed Position 6’ Long. Extended Position 9’ Long.

4XP30 6 FT Werner PA206
Approx. Shipping Weight 31.0 lbs.

Closed Position 8’ Long. Extended Position 13’ Long.

4XP31 8 FT Werner PA208
Approx. Shipping Weight 40.5 lbs.

Closed Position 10’ Long. Extended Position 17’ Long.

4XP32 10 FT Werner PA210
Approx. Shipping Weight 56.5 lbs.

16
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

STAGES, HANDRAILS AND TOEBOARDS

ALUMINUM STAGE PLANKS, HANDRAILS AND TOEBOARDS

Aluminum Stage Planks

Ideal for ladder jack applications, swing stages, or cat-
See Red 8 - 39 Varies by Size walks. Strong design features double rungs on the ends
Book FT See Red Book for rigidity. Available in Lengths from 8’ - 39’ and Widths
from 12” to 28”. Load Capacity from 250 lbs.1-Man to
750 lbs. 3-Man. Vinyl-coated end caps.

Modular Guard Rail and Toe Board Systems

For use on Werner aluminum stage planks. Protects users
See Red 8 - 39 Varies by Size
and tools from falling off planks. Quick and easy to install,
Book FT See Red Book
store and transport. Available in Lengths from 8’ - 39’ and
Widths from 12” to 28”. (Stage planks sold separately)

TRUCK RACK
Load Capacity: 1000 lbs Steel Over Cab Pickup Truck Rack

Black. Approx. Shipping Weight 125 lbs. Vinyl protec-

tor strips to protect equipment against transit damage.
Includes adaptor plates that allow rack to mount over most
3AY77 Werner TR501-S
cabs (750 lbs. load capacity). Includes quick release rear
bar feature and predrilled uprights. Cargo positioners help
protect cargo in transit.

VAN RACK
Load Capacity: 600 lbs Steel Van Rack

White. Approx. Shipping Weight 40 lbs. Includes predrilled

3AY76 Werner VR401-W uprights. Cargo positions and vinyl strips help protect
cargo in transit.

17
 CROSS-REFERENCE CATALOG

Grainger
Height Model # Description
Item #

ACCESSORIES
Accessories designed to fit Werner ladders to increase productivity and safety

JobBucket Accessory, 25 lbs. Load Capacity.

Compatible with OBEL00, OBCN00, 6200 Series and 6000
1XGF7 Werner AC50-JB-3 Series. Increase ladder storage and maximize your work
space on top of your ladder. Over 600 cubic inch capaci-
ty. Shipped in boxes of 3.

ToolLasso® with Belt Clip Accessory

Secures tools from falling. Can be wrapped around the
1XGF8 Werner AC58-TL grip of power tools, hand tools or caulk guns. Keeps tools
within easy reach on top of your ladder or on a belt. Clip
attaches to belt and ToolLasso® fits into belt clip.

Extension Ladder Covers

Helps protect surfaces from scratch-
4XN86 Werner AC19-2
es and dents. Flexible and easy to install.
Made of soft rubber material.

QuickClick™ Stabilizer
Stabilizer with spring-loaded locking latch makes it
4XN88 Werner AC78 easier to install and remove than conventional stabilizers.
Modular 3 component design allows for compact storage.
Spans 44” and stands off 10”.

Aluminum Ladder Jacks

Lightweight, sturdy and easy to use. Accepts planks up to
4XN82 Werner AC10-20-02 20” wide. Platform clamps secure entire ladder jack sys-
tem. Jack mounts on either side of extension ladder. For
use on ladders of 250 lbs., Type I Duty Rating or higher.

Aluminum Ladder Leveler

Allows use on uneven surfaces and adjusts up to 8-1/2”.
Ladder Leveler with 2 base attachments. Base unit stays
4ZY21 Werner PK70-1
attached while leveler can be easily removed when not in
use. Use on either side of ladder. For Werner extension
ladders only.

Stabilizer and Surface Protector

Span adjustment is 49”, 57” or 65”. Stand-off distance
is 12” or 29-1/2”. Rectangular stabilizer spans double
4XN81 Werner 97P
windows. Quickly converts stand off distance for larger
overhangs. Mounts quickly and easily. Comes with rubber
pads and fleece bonnets.

NOTE: SEE RED BOOK FOR ADDITIONAL ITEMS AND INFORMATION

18
 www.wernerco.com

AVAILABLE THROUGH

For more information contact your Grainger

Representative or visit Grainger.com®

GM6767 REV D © 2015 Werner Co. 03/15

19 8SSP3652