Scribd
Upload
2K views4 pages

Cylinder Lube Oil Feed Rate Calculation From HMI R-Value

This document contains information about a ship's engine including the number of cylinders, engine type, builder, and lubricator settings. It lists the engine power at maximum continuous rating (MCR) as 12399 bhp (9119 kW) and calculates the actual cylinder oil feed rate as 1.47 g/bhph (2.00 g/kWh). Charts are shown predicting the feed rate and lubricator piston activations at various load percentages under different operating modes.

Uploaded by

Андрей Андреевич
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views4 pages

Cylinder Lube Oil Feed Rate Calculation From HMI R-Value

This document contains information about a ship's engine including the number of cylinders, engine type, builder, and lubricator settings. It lists the engine power at maximum continuous rating (MCR) as 12399 bhp (9119 kW) and calculates the actual cylinder oil feed rate as 1.47 g/bhph (2.00 g/kWh). Charts are shown predicting the feed rate and lubricator piston activations at various load percentages under different operating modes.

Uploaded by

Андрей Андреевич
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

12399

### Lloyds no.:


Number of cylinders: Eng. type: Builder/no.:
Date: Place: Visit by:

Insert values in the blue boxes:

r_value from HMI panel 225 [activations/minute]


(total no. of lubricator activations per. min.)
Engine power at MCR 12399 [bhp] 9119 [kW]
Actual power 12399 [bhp] 9119 [kW]
Lubricator piston diameter (fixed value) 4.5 [mm]
Lubricator stroke (fixed value) 15.06 [mm]
Number of pistons in lubricator (fixed value) 6
Specific density of cylinder oil 0.94 [kg/l]

Calculated values:

Actual cylinder oil feed rate 1.47 [g/bhph] 2.00 [g/kWh]

Actual cyl. oil consumption 466 [litres/24h]

Forecasted values at MCR at present HMI setting.

Note: Forecasts are only valid when LCD is inactive


Note: MEP and RPM mode calculation is only valid for fixed pitch propeller.

MEP proportional feed rate calculation algorithm (MEP mode) 1.47 [g/bhph] 2.00 [g/kWh]
(Standard algorithm)

RPM proportional feed rate calculation algorithm (RPM mode) 1.47 [g/bhph] 2.00 [g/kWh]

Power proportional feed rate calculation algorithm (Power mode) 1.47 [g/bhph] 2.00 [g/kWh]

2300/08/01/2022
g/bhph - function of load percent
4.00

3.50 MEP mode


RPM mode
3.00 Power mode

2.50
feed rate [g/bhph]

2.00

1.50

1.00

0.50

0.00
20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 120%

load percent
MEP mode RPM mode Power mode
load % mep inc f_rate g/bhph rpm inc f_rate g/bhph power inc f_rate
25% -60.3% 89 2.33 -37.0% 142 3.71 -75.0% 56
30% -55.2% 101 2.20 -33.1% 151 3.28 -70.0% 68
35% -50.3% 112 2.09 -29.5% 159 2.96 -65.0% 79
40% -45.7% 122 2.00 -26.3% 166 2.71 -60.0% 90
45% -41.3% 132 1.92 -23.4% 172 2.50 -55.0% 101
50% -37.0% 142 1.85 -20.6% 179 2.33 -50.0% 113
55% -32.9% 151 1.80 -18.1% 184 2.19 -45.0% 124
60% -28.9% 160 1.74 -15.7% 190 2.07 -40.0% 135
65% -25.0% 169 1.70 -13.4% 195 1.96 -35.0% 146
70% -21.2% 177 1.66 -11.2% 200 1.87 -30.0% 158
75% -17.5% 186 1.62 -9.1% 204 1.78 -25.0% 169
80% -13.8% 194 1.58 -7.2% 209 1.71 -20.0% 180
85% -10.3% 202 1.55 -5.3% 213 1.64 -15.0% 191
90% -6.8% 210 1.52 -3.5% 217 1.58 -10.0% 203
95% -3.4% 217 1.50 -1.7% 221 1.52 -5.0% 214
100% 0.0% 225 1.47 0.0% 225 1.47 0.0% 225
105% 3.3% 232 1.45 1.6% 229 1.42 5.0% 236
110% 6.6% 240 1.42 3.2% 232 1.38 10.0% 248
g/bhph
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47
1.47

You might also like