BITZER Output data

Created on : 13/11/2013 9:49:26

BITZER Software v6.4.0 rev1076 13/11/2013 / All data subject to change. 2/6

Table of content

Project survey............................................................................................................................................................ 3
Compressor Selection: Condensing Units................................................................................................................. 4
Technical Data: LH135/4PES-15Y............................................................................................................................. 5
Condensing Units...................................................................................................................................................... 6
 chiller

BITZER Software v6.4.0 rev1076 13/11/2013 / All data subject to change. 3/6

Project survey
Selected compressors
Condensing Units 1x LH135/4PES-15Y
 chiller

BITZER Software v6.4.0 rev1076 13/11/2013 / All data subject to change. 4/6

Compressor Selection: Condensing Units

Input Values
Unit type LH135/4PES-15Y
Series Standard
Refrigerant R404A
Reference temperature Dew point temp.
Evaporating SST -10,00 °C
Ambient temp. 32,0 °C
Suction gas temperature 20,00 °C
Useful superheat 100%
Operating mode Auto
Power supply 400V-3-50Hz
Capacity Control 100%

Result
Unit type LH135/4PES- 15Y-40P
Capacity steps 100%
Cooling capacity 25,8 kW
Evaporator capacity 25,8 kW
Power input * 10,00 kW
Current (400V) 18,33 A
Voltage range 380-420V
Mass flow 722 kg/h
Condensing SDT 42,9 °C
Liquid subcooling 3,00 K
Operating mode Standard

Tentative Data.
*Power input compressor, power input fan see ''T. Data''

Application Limits

Legend
additional cooling or suction gas
superheat ≤20K
additional cooling or max. toh
<0°C
M1: motor 1

M2: motor 2
 chiller

BITZER Software v6.4.0 rev1076 13/11/2013 / All data subject to change. 5/6

Technical Data: LH135/4PES- 15Y

Technical Data
Technical Data
Weight 331 kg
Total width 1591 mm
Total depth 1000 mm
Total height 998 mm
Connection suction line 42 mm - 1 5/8''
Connection liquid line 22 mm - 7/8''
Fans: Number 2
Voltage (more on request) 230VD / 400VY-3-50Hz (Standard)
Current / Power consumption of each fan 2,80 A 1,62 A / 750 W
Air flow condenser 50Hz 12650 m³/h
Voltage (more on request) 230VD / 400VY-3-60Hz (Option)
Current / Power consumption of each fan 3,40 A 1,95 A / 1050 W
Air flow condenser 60Hz 13900 m³/h
Coil Volume 22,0 dm3
Receiver type (Standard) F302H
Max. refrigerant charge 90% at 20°C
R22 32,7 kg
R134a 33,1 kg
R407C 31,3 kg
R404A/R507A 28,8 kg
Extent of delivery (Standard)
Discharge line Standard
Protective charge Standard
Available Options
Oil separator Option
Check valve Option
High & low pressure switch Option
Dressed unit Option
Weather protective housing Option
Sound measurement
Sound power level (-10°C / 45°C) 89,0 dB(A) @ 50Hz
Sound pressure level @ 1m (-10°C / 45°C) 81,0 dB(A) @ 50Hz
Data of compressors: see compressor program
 chiller

BITZER Software v6.4.0 rev1076 13/11/2013 / All data subject to change. 6/6

Condensing Units
Motor 1 = e.g. LH../4TES-12 (4T-12.2) with 12"HP", primary for air-conditioning (e.g. R22,R407C) and medium
temperature application (e.g. R134a, R407F, R407A, R404A, R507A, R22) and air-conditioning with R134a at high
ambient temperatures
Motor 2 = e.g. LH../4TES-8 (4T-8.2) with 8"HP", for medium and low temperature application (e.g. R134a, R407F,
R407A, R404A, R507A, R22) and air-conditioning with R134a.
For more information concerning the application range use the "limits" button.

Operation modes for LH../4VES-7 (4Z-5.2) to LH../6HE-25 (6H-25.2) with R22:

Specifications for sound emission Ecostar:

Legend of connection positions according to "Dimensions":

1 Suction valve
2 Discharge gas line
3 Cndensate line
4 Refrigerant outlet
5 Pressure relief valve connection