Scribd
Upload
1K views

Redragon Mechanical Keyboard K550 YAMA Software Operation Instruction

The software allows users to customize their Redragon K550 YAMA mechanical keyboard. It includes options to set up 3 profiles with macros and key bindings. Users can record macros by inputting key presses and assign them to keys. The software also enables customizing the keyboard's backlighting with 18 lighting modes. All settings can be restored to defaults and profiles can be imported or exported.

Uploaded by

Juan Gonell
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Redragon Mechanical Keyboard K550 YAMA Software Operation Instruction

The software allows users to customize their Redragon K550 YAMA mechanical keyboard. It includes options to set up 3 profiles with macros and key bindings. Users can record macros by inputting key presses and assign them to keys. The software also enables customizing the keyboard's backlighting with 18 lighting modes. All settings can be restored to defaults and profiles can be imported or exported.

Uploaded by

Juan Gonell
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Redragon Mechanical Keyboard K550 YAMA

Software Operation Instruction


Software’s installation:

1. Insert the CD driver into PC, or download the software from website(www.redragonzone.com).
2. Plug in the YAMA keyboard to PC until the system finishes driver installation automatically.
3. Run the Mechanical Gaming Keyboard.exe file. Finish each step as the instruction shows to complete the installation.
4. Select to create shortcut of the software on PC’s desktop in the installation.

Software interface:
1. The main interface shows as below:

2 The interfaces introduction:


It includes three profiles, macro editor, Light setting, keyboard graphical interface.
1) -Profiles: There are three profiles with same property of being edited.
2) -Marco: Marco editor Click right button of mouse to create a macro name, for example “ET”
2.1 Save Macro name by Click OK, then click Apply, now you can go ahead to macro recording.
2.2 Recording the macro content, for example ASD click ok Click apply to complete recording
2.3 The content of recording can be move up or move down to the top or bottom.
2.4 Each profile contains 5 macros. There are totally 3 profiles. The maximum of macro recording content is 800 bytes.

3)Key settings: Include Single key, Marco key, Multi-media key.


All keys edit & LED edit can be renewed to default status through “restore default”, click “Apply” to complete, then click “ok” to
save the current setting and the UI will be minimized to taskbar.
-Single key setting: To set the normal key function as needed. (For example: “Q” key can be set as F6)
Macro setting: Select the macro name(For example “ET”) Click OK then Click Apply to assign the macro on single key (For
example “A”)

How to record:
Click “+” add a macro, Click “-” remove a macro.
Click “Record” to start recording.
For example, Input AASSDD on Q key saved as macro name ‘ET’
Click “delete/clear” key to remove one single typing or the whole group recording under ‘ET’.
Select “Record delay” to record the press key time and release time. “Recycle times” means select the macro repeat time.
Interface introduction:
A, Move an input to the top
B, Move an input up
C, Move an input down
D, Move an input to the bottom
E, Record the delay for each input. If not selected, the delay value is recorded as default as 50 for each input.
F, Number of cycles: repeat times of inputs
G, Marco name: it is editable
H, Create or delete a macro, click”+” add a new macro. The default name is “marco01” “Marco02”, and so on, it is available for
rename, click- remove a macro.
I, Start recording.
J, Delete an input one by one
K, Clear all inputs at once.
I, “OK” to save the recording, press” Apply” to assign the macro to single key, “Cancel” to cancel the recording
Media: Set Media function on one single key. (like set “WWW Favorite” on A, then click “OK” and click “Apply” )
4) Lighting mode: Select the lighting effect by driver, over 18 backlight modes for options.

Remark: The Light mode setting menu must be close while keyboard is in the key setting.
5) Restore Default: All keys edit & LED edit can be renewed to default setting through “Restore Default”, click “Apply” to
complete, then click “ok” to save the current setting and the UI will be minimized to taskbar.
6) Menu key introduction：Import, Export, About, Close.
Import/Export: Import/export the profiles

You might also like