www.cyrusher.

com

LCD-S700 Pedal Assisted/Throttled

Ebike Smart Computer
User’s Manual
For Model:

Cyrusher XF660-1000w, XT750, XF500-G660

1 / 29
 www.cyrusher.com

Contents

Introduction:
1. Outside Drawing and Size Requirements.................................................................4
1.)Main materials and colors.....................................................................................5
2.)Appearance dimensions and installation dimensions（Unit:mm）.......................5
3.)External key graphics dimensions and installation dimensions（Unit:mm）........5
4.)Schematic diagram...............................................................................................6
5.) Physical installation schematic...........................................................................7
2.Product Introduction and Function Overview............................................................7
1.)The two-way communication protocol and external three-way button facilitate
the operation for customers..................................................................................7
2.)Speed display.......................................................................................................7
3.)Kilometer/mile display...........................................................................................7
4.)Intelligent battery display......................................................................................7
5.)Headlight control..................................................................................................7
6.)Backlight brightness 3 adjustment.....................................................................7
7.)5 Gears control.....................................................................................................8
8.)Mileage display.....................................................................................................8
9.)Fault code prompt.................................................................................................8
10.)6KM power-assisted mode...................................................................................8
11.)Parameters setting................................................................................................8
3.Liquid crystal display content and description...........................................................8
1.)Battery Indicator.....................................................................................................8
2.)Speed mode...........................................................................................................9
3.)Speed value display...............................................................................................9
4.)6KM power-assisted display...................................................................................9
5.)Gear display...........................................................................................................9
6.)Headlight display....................................................................................................9
7.)Mileage Mode.........................................................................................................9
8.)Riding Time............................................................................................................9
9.)Error code display..................................................................................................9
4.External key definition.................................................................................................9
5.Instructions for operating methods and functions.......................................................9
1.)Starting up shutdown.............................................................................................9
2.)Speed mode switching.........................................................................................10
3.)Mileage mode, riding time and error code
switching............................................11
4.)Power gear selection............................................................................................12
5.)Headlight switch...................................................................................................13
6.)6KM assistance pushing (Walking pattern)..........................................................13
6.System parameter setting........................................................................................14
2 / 29
 www.cyrusher.com

1.)Backlight brightness.............................................................................................15
2.)Metric/Inch system...............................................................................................15
3.)The working voltage meter supported..................................................................16
4.)Sleep time............................................................................................................16
5.)Steering gear........................................................................................................17
6.)Wheel diameter selection.....................................................................................18
7.)Measured number of magnetic steels..................................................................18
8.)Speed adjustment................................................................................................19
9.)Zero start and non-zero boot Settings.................................................................19
10.)Driver setting.......................................................................................................20
11.)Power sensitivity setting......................................................................................21
12.)Power start strength setting.................................................................................21
13.)Booster disk type setting.....................................................................................22
14.)Controller limited value stream setting................................................................23
15.)The controller undervoltage value display...........................................................23
16.)Accumulated mileage resetting............................................................................24
17.)Restore Factory Defaults.....................................................................................24
7.Meter specification parameter................................................................................25
8.Error code definition................................................................................................25
9.Using Tips...............................................................................................................26
10.Common questions and answers..........................................................................27
11.Quality commitment and warranty scope...............................................................27
12.Version changes....................................................................................................27

Introduction
Dear users, for your correct use of LCD - S700 LCD display instrument,please read
the user's manual and relevant notes carefully before using.We will help you to
understand and familiarize the instrument’s functions with the simplest language,
including how to operate the instrument, how to set system parameters, how to
achieve the optimal matching state of motor, controller and instrument and how to
improve the electric control performance of electric motor.The contents of this manual
contain the installation, operation, system parameter setting and proper use of the
instrument, which can help you to solve the problems and doubts in actual use.

1. Outside Drawing and Size Requirements.

1.)Main materials and colors

The material of LCD-S700 instrument shell and external key are mainly ABS,
liquid crystal clear window is Acrylic.

2.)Appearance dimensions and installation dimensions（Unit:mm）

3 / 29
 www.cyrusher.com

3.)External key graphics dimensions and installation dimensions（Unit:mm）

4.)Schematic diagram
4 / 29
 www.cyrusher.com

Red line: VCC

Blue line: Electric lock DS
Black line: GND
Green line: Data receiving line RX
Yellow line: Data sending line TX
Brown line: Headlight DD
White line: Headlight GND
Note: Specific wiring methods and line colors are customized according to customer
requirements.
5.) Physical installation schematic
Fix the instrument LCD display part and external key to the electric vehicle and
adjust the appropriate angles. Connect the instrumentation plug-in to the controller to the
application plug-in, in the case of bike without power. Turn on the power, the electric bike
and the instrument enter a normal operation condition, thus the instrument installation has
been completed.

2. Product Introduction and Function Overview

1.)The two-way communication protocol and external three-way button facilitate the
operation for customers
2.)Speed display: Including real-time speed, MAX SPEED, AVG SPEED.
3.)Kilometer/mile display: setting the kilometers(K/h) and miles( Mph) according to
customers’ habits.
5 / 29
 www.cyrusher.com

4.)Intelligent battery display: display the battery’s current power

5.)Headlight control: control the opening and closing of headlights through external
keys
6.)Backlight brightness three adjustment: set backlighting according to customers’
using habits, 1 grade means-darkest, 3 grade means-lightest.
7.)Five gears control: according to customers’ requirements, you can choose the
assisted gears 0-5 by the outer button, and 0 means neutral
gear, no assistance (The default is 5 gear).
8.)Mileage display: the cumulative mileage can be displayed is 0D0, single mileage
TRIP, riding time.
9.)Fault code prompt: the details is in the error code definitions and schedule 1
10.)6KM power-assisted mode: it displays cruising WALK in the 6KM power-assisted
mode
11.)Parameters setting: all parameters can be set by setting the interface, including
gear, wheel.
3.Liquid crystal display content and description

1.)Battery Indicator: 10 segments energy indicators, can set the voltage values of each
segment according to customers’ requirements.
2.)Speed mode: AVG SPEED, MAX SPEED, SPEED.
3.)Speed value display: Km/h, kilometres per hour, MPH miles per hour
4.)6KM power-assisted display: it displays cruising WALK in the 6KM
power-assisted mode
5.)Gear display: display the current assisted gear, 0-5, and 0 means neutral gear,
no assistance.
6.)Headlight display:it displays when the headlight and backlight is on.
6 / 29
 www.cyrusher.com

7.)Mileage Mode :including the single mileage TRIP and the cumulative mileage 0D0,
8.)Riding Time: displays the riding times
9.)Error code display: ERRO and error code are displayed when the fault is detected
4.External key definition.
LCD-S700 adopts the LCD part and external three - to - button separation in the form
of design, the communication is connected by the bottom lead.

There are three keys, using the key replaces “UP”, replaces

“MORE”, replaces “DOWN”.

5.Instructions for operating methods and functions
1.)Starting up shutdown
Long-press the MODE button for 3 seconds when the instrument is off, the instrument
fully shows and starts working, turn on the controller power; In boot state , long press

the button for 3 seconds, the cyclocomputer be power off and close the
controller power supply. If there is no riding or not any operations to the instrument in
10 minutes( set time by the user), the instrument will power off automatically. In the
shutdown state, the power consumption of the instrument and the controller is 0.
The instrument boot display interface is as the image 1 shown.

2）Speed Mode Switch

Long press the button and to change the display information of speed,
show the real-time speed → the max speed → the average speed cyclically.
Display interface of speed mode、riding time are as the image 2,3,4 shown.

7 / 29
 www.cyrusher.com

3) Mileage Mode、Riding Time、Error Code switch

Shortly press the button to switch the display of Mileage Mode、Riding Time、Error

Code, show the Trip → ODO → Riding Time → ERR cyclically.

The display interface of switch mode are as the Image 5,6,7,8
shown.

8 / 29
 www.cyrusher.com

4) Assistance Stall Chose

Shortly press the button and to switch the assistance stalls, change
the motor assistance power, min stall 1, max stall 5. It is stall 1 by default in boot state, stall 0 is
neutral, which can be seen as the image 9,10
shown.

9 / 29
 www.cyrusher.com

5) Headlight Switch

Long press the button for 3 seconds to open the bike light. Long press the

button for 3 seconds again to close the bike light. The headlight display interface are
as the image 11,12 shown.

6) 6KM Assistant Drive (walk mode)

Long press the button for 3 seconds when in bike is in still state, then the ebike
begin assistant drive state, speed presentation is according to the external conditions (Showing

10 / 29
 www.cyrusher.com

Figure is 4.5~7.5km/h), showing the symbol of WALK. Release the button (or long

press the button for 3 seconds or shortly press the button ), the
ebike would exit WALK mode. There are two ways of exiting WALK mode, Long press and shortly
press. The specific using method will be according to the customer’s request. As the Image 13

shows.
6. System Parameter Settings

In the boot state, long press the button and , the system
enters parameter setting state(image 14). Under this state, setting the cyclocomputer,

then long press the button and again to exit

the setting state or No Operation(10s) and to exit setting state automatically. In

the parameter setting state, shortly press the button / to

adjust the figure of parameter setting, press the button to switch setting

item and save the parameter figure of the last item.

11 / 29
 www.cyrusher.com

1) Back Brightness: Showing P01, shortly press the button

/ to show 1-3,1 is the darkest backlight, 3

is the brightest. 2 is the default state, as the image 14 shows.

2) Metric/Imperial : showing P02, shortly press the button

/ to switch the display of km/h or mph to set

metric/imperial, the default state is km/h, as the image 15,16

12 / 29
 www.cyrusher.com

shows.

3) Cyclocomputer Support Voltage: showing P03, shortly press the

button / , shows 24~28,each up step is 12, the

default is 36V, as the image 17 shows.

4) Sleep Time: showing P04,shortly press the button

/ ,and shows 0~60, which indicates the time of

13 / 29
 www.cyrusher.com

automatic shutdown when the bike is in still state or there is

no operation.0 presents “won’t automatic shutdown”. The
default sleep time are 5 minutes, as the image 18 shows.

5) Assistance Stall: showing P05, shortly press the button

/ and it displays 0,1,2.

0: the assistant stall is 3-stall mode, which are stall 1,2,3;
1: the assistant stall is 5-stall mode, which are stall
1,2,3,4,5.
2: the assistant stall is 9-stall mode, which are stall
1,2,3,4,5,6,7,8,9.
When the assistant stall is 1, there are 5 stall modes on the
operation interface, as the image 19、20 shows.

14 / 29
 www.cyrusher.com

6) Wheel Diameter Choose: showing P06, shortly press the button

/ , switch to corresponding wheel diameter, the unit

is inch, accuracy: 0.1, as the image 21 shows.

7) Number of Speed Magnet: showing P07, shortly press the button

/ to switch the display range 1-100, as the

image 22 shows.

15 / 29
 www.cyrusher.com

Shows the number of measured magnetic steel

16 / 29
 www.cyrusher.com

8）Speed adjustment：display P08 short press key /

key to switch display The speed limit range 0 ~

100KM/H, 100 indicates the speed limit, as shown in figure 23

Display speed limit

17 / 29
 www.cyrusher.com

9 ） Zero boot, non-zero boot setting: display P09, short

press key/ key to switch

display 0, 1. 0: zero start, 1: non-zero start, as shown in figure 24

Display startup mode

18 / 29
 www.cyrusher.com

10) Drive mode setting: display P10, short press key/

key to switch display 0, 1, 2, as shown in figure 25

0: power driver (which determines how much power the output is through the
power of the help gear, and then turns invalid);
1: electric drive (by turning the driver, the gear is invalid at this time);
2: power drive and electric drive coexist simultaneously (electrically driven zero-start
state is invalid).

Display drive mode

19 / 29
 www.cyrusher.com

11) Support sensitivity setting : display P11, short press

key/ key to switch display 1~24. as shown in figure 26

Display the support sensitivity mode

20 / 29
 www.cyrusher.com

12) Power start strength setting: display P12, short press

key/ key to switch display range from 0 to 5, as shown

in figure 27.

Display the power start strength mode

21 / 29
 www.cyrusher.com

13) Booster disk type setting, display P13, short press

key/ key to switch display 5,8,12 disk type, as shown in

figure 28

Display the booster disk type setting mode

22 / 29
 www.cyrusher.com

14) Controller limit flow setting, display P14 short press

key/ key to switch display range from 1~20A, as shown

in figure 29.

Display the controller limit flow mode press

23 / 29
 www.cyrusher.com

15) The controller undervoltage value display, display P15, display the controller
undervoltage value, shown as figure 30

display
the controller undervoltage value mode

24 / 29
 www.cyrusher.com

16) The cumulative mileage is zero: display P16, The speed position shows the

current cumulative mileage, long key(5s), when the

speed shows 0, the cumulative mileage is zero. shown as figure 31, 32.

25 / 29
 www.cyrusher.com

display0000
the cumulative mileage is zero

26 / 29
 www.cyrusher.com

17) restore factory settings: display P17, long key(5s),

when the speed shows SSSS, it means restore factory settings(except cumulative
mileage), shown as figure 33.

display SSSS

27 / 29
 www.cyrusher.com

7 Instrument specification parameter

1）24V，36V，48V power supply
2）Rated working current 10mA
3）Maximum working current of meter 30mA
4）Shutdown leakage current is less than 1uA
5）Supply controller side working current 50mA
6）Temperature: - 18 ~ 65 ℃

7）Storage temperature: - 30 ~ 80 ℃
vjh

8 Error code definition

S700 can provide warning for the vehicle fault, in the LCD shows the ERROR icon
when a failure is detected, the position ERROR code displayed ERROR code n, n = 0
~ 11 shows ERROR, ERROR code comparison table 1 table as shown below

Status code State Process mode

（decimalism）

0 normal

6 Battery under voltage Battery charge

7 Motor fault Check whether the power

line is loose

8 Handle fault Check the links, if it is

normal, then replace the
handle

9 Controller fault Check the links

10 Reception fault Check the links of the

instrument cable

11 Communication fault Check the links of the

instrument cable

28 / 29
 www.cyrusher.com

Table 1

9 maters needing attention

In use, the time interval between starting and shutdown should not be less than 3
seconds, and do not press the MODE key when it is turned off
Pay attention to safe driving in use and avoid instrument crashing. Try not to use it
in harsh conditions, such as heavy rain, heavy snow, and exposure. Try to avoid the
use of battery under voltage and avoid damage to electric car batteries.
When the temperature is under 10℃, the screen will turn dark with the reduce of
the temperature.
10 Frequently questions and answers
question: why it can not be started?
Answer: checking whether the wire harness of the instrument is in good contact
with the controller.
question: How should the fault code be handled?
Answer: coming to the ebike agent for maintenance.
11 Quality commitment and warranty scope
After the instrument is out of the factory, the shell being scratched or broken is not
repair. Lead line cuts, fracture is not repaired; Loss of circuit function, guarantee
period: within 12 months since the instrument out of the factory.
12 Version changes
This instrument specification is the universal version for S700, a part of the
instrument is different from this specification, both are based on the actual
version.

29 / 29