Machining Challenges - Simplified

HO R IZO N TA L M A C HI N I N G C EN TERS
 DESIGNED for . . .
Flexibility to produce parts with optimum
efficiency and precision . . .
The Horizontal G Series is the culmination of excellence in the
manufacture of high-performance machine tools that spans over 83
years. This dedication to excellence is grounded in our principles of
relentless innovation, state-of-the-art manufacturing techniques and
facilities and an unwavering commitment to absolute customer
satisfaction.

Kitamura G Series Horizontal Machining Centers provide these important

benefits:

n Made in Japan quality

n Designed using advanced materials with
ultra-high precision techniques
n Space saving footprints
n Operator convenience and ease of use

Mycenter-HX800G n High speed processing Arumatik ®-Mi

CNC Controller

2 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

Supercell-300G
Unmanned machining

Mycenter-HX250iG

HORIZONTAL MACHINING CENTERS

3
 Meticulously ASSEMBLED from
the Ground Up
Assurance for long-lasting performance
Mycenter G Series Machining Centers are built on the Kitamura
premise of TGA (True Geometric Accuracy). Our machines are designed
and built to the highest standards - no shortcuts. Premium grade
castings are meticulously hand-scraped and assembled to assure final
fit and finish unmatched in the industry. Result. Perfect parallelism and
perpendicularity that are so crucial for heavy-duty cutting performance,
superior accuracy and long-term reliability.

Kitamura castings provide critical

design benefits:

n Premium grade Meehanite cast iron

n Solid column construction

1 n Hand-scraped surfaces for absolute

perfect fit with no gaps
n Solid Induction Hardened Boxways
produced at our factories
n Zero overhang for guaranteed static
accuracies of +/- 0.002mm
(+/-0.000079") / full stroke

Only the highest grade Meehanite Cast Iron is

used in Kitamura construction. This in
2 combination with our induction hardened,
precision ground solid boxways provides the
mass, stability and damping necessary to offer
heavier cutting ability, superb surface finishes
3 and longer tool life.

4 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

Solid One-Piece Design

ATC
X-AXIS
1 Craftsmanship in
TABLE
Handscraping
Z-AXIS
All critical machine contact surfaces are PALLET STATION

extensively and meticulously hand-scraped

STATION
by some of the world’s most experienced
machine tool technicians to ensure that
X
machine components fit perfectly each and Z Y
every time. Hand scraping and hand fitting of TABLE

Spindle Mounting Surface components allow for true geometric

BASE
tolerances and long machine tool life.
2
Consistent accuracies of For optimum precision and reduction of
+/-0.002mm (+/-0.000079") / Full Stroke installation time, main casting components
and +/-0.001mm (+/-0.000039") are assembled, aligned and shipped
repeatability are able to be achieved as a complete. This ensures factory specified
result of this time honored tradition. accuracies are duplicated upon delivery. The
solid column is securely attached to the solid
one-piece base for optimum strength, rigidity
and vibration damping.

Conventional
Two-Piece Bed Design
X-AXIS
ATC

Saddle Mounting Surface TABLE

PALLET STATION
3 Z-AXIS

STATION

X Y Z
TABLE

BASE

Two-piece base construction is prone to

excessive vibration, adversely affecting
Ballscrew Mounting Surface accuracy and parts surface finishes. Overall
machine performance and accuracy
deteriorates over time.

HORIZONTAL MACHINING CENTERS

5
 BUILT to Endure
Premium grade components assure
long-term quality, precision and reliability.
The best components make for the best machine. That’s why Kitamura
uses only the finest available. Meehanite cast structures, drive systems
including precision fine pitch ballscrews and servomotors, award-
winning spindles, tool and chip handling systems. Every component –
from the ground up – must meet or surpass Kitamura’s commitment to
quality and performance.

In-house induction hardening assures total

process control.

The color of excellence.

Kitamura is the only
manufacturer that induction
hardens and precision grinds
their solid boxways.

6 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

All structure mating surfaces are precision hand-

scraped to assure absolutely perfect fit. No need
for geometry compensation to adjust for
squareness, parallelism and perpendicularity.

High-precision, pre-tensioned fine pitch Premium grade servomotors with 16 million

®

ACY®
ballscrews are precisely temperature regulated to pulse encoders deliver astounding
CCUR
RIC A
OMET
TRUE
GE eliminate accuracy robbing thermal growth. +/- 0.002mm (+/-0.000079”) / full stroke
positioning accuracies and powerful drive
capability for tough cutting conditions.

Solid Boxways
n 7 times more surface contact

n 7 times more vibration damping

n Heavier cutting capability

HORIZONTAL MACHINING CENTERS

7
 POWER for Every Application
Flexibility to produce parts with optimum
efficiency and precision . . .
The spindle is the powerplant of your HMC. Mycenter G Series HMCs
are available with a wide variety of spindle configurations to suit your
specific metalcutting requirements.

Our Dual contact spindle system provides simultaneous taper

and flange contact for optimum rigidity. Tight bearing preload
assures long-term spindle stiffness. Our gear driven design and
efficient oil chiller system dissipate heat. And they deliver
enhanced machining flexibility by delivering low-end heavy
torque and high-speed fine finish capability.

Delivering strong low-end torque and high-end

fine finish capability, Kitamura's Multi-Step Gear
Driven Spindles deliver unmatched power and
energy efficiency for increased productivity and
energy savings.

Kitamura has and continues to innovate "ecologically friendly"

technology into our machines. Our unique gear driven spindles "sip"
energy when compared to other spindle designs, yet deliver more cutting
power. This design has earned Kitamura the coveted “20th Japan
Industrial Machining Union Chairman Award” for the best energy-saving
machine tool technology.

Main Spindle Power and Torque Diagram Main Spindle Power and Torque Diagram
Machine Type HX500iG, HX630G, HX800G / 12000 min-1 Torque Machine Type HX500G, 630G, 800G / 8000 min-1 Power
Torque Power
Nm
●
KW
Nm KW
1225.9N m 311min-1
●

652min-1 ●

585.9N m
●
7070min-1 831min-1 3378min-1
1739min-1 1200
1250min-1 40kW
40kW
500 40 40
2600min-1 1000
35 22490min-1 35
400
22kW (Cont.) 30 800 30
322.3N m
●
674.2N m
●

25
300 25 22kW
600
20 20
200 15 400 15
15 MIN RATIO
CONTINUOUS RATIO
10 15 MIN RATIO
10
100 200
CONTINUOUS RATIO
5 5
0 0 0
0 2000 4000 6000 8000 10000 12000 0 1000 2000 3000 4000 5000 6000 7000 8000
Spindle Speed min-1 Spindle Speed min-1

8 HORIZONTAL MACHINING CENTERS

 #30 TAPER HSK-E40
Mycenter-HX250iG Mycenter-HX250iG
Machining Challenges - Simplified
Spindle Speed 150 ~ 15,000min-1 30,000min-1 Opt.
Drive Method Direct Drive Built In
Max. Spindle Torque 70.0 N m (51.6 ft lbs)
l l
14.6 N m (10.8 ft lbs)
l l

Main Spindle Power and Torque Diagram

Spindle Motor 11kW (15 HP AC/30 min) 18kW (24 HP AC /2 min) Machine Type HX250iG / 15000 min-1
Torque Power
1500 min-1 4000min-1
Nm KW
7.5kW (20HP AC/10 min) 15kW (20 HP AC /Cont.)
●

80
70.0N m
● 11kW (30 min.)

60 10
7.5kW (Cont.)
#40 TAPER (*HSK-A63) 47.7N m
●

40

5
Mycenter-HX300iG / 400iG Mycenter-HX300iG / 400iG 20
30 MIN RATIO
CONTINUOUS RATIO

Spindle Speed 40 ~ 15,000min-1 200 ~ 20,000min-1 Opt.*

0 0
0 2000 4000 6000 8000 10000 12000 14000 15000
Drive Method Direct Drive Built In Spindle Speed min-1

Max. Spindle Torque 95.5 N m (70.4 ft lbs)

l l
118 N m (87.0 ft lbs)
l l

Main Spindle Power and Torque Diagram

Spindle Motor 15kW (30HP AC/10 min) 22kW (30HP AC/15 min) Machine Type HX250iG / 30000 min-1
Torque Power
7.5kW (10HP AC/Cont.) 18.5kW (25HP AC/Cont.) Nm●
1740min-1 22490min-1 24960min-1 KW
1790min-1
20
15 18kW (2 min-1)
14.6N m
●

15kW (Cont.)
Mycenter-HX500iG Supercell-300G 12.1N m
●
15
10

Spindle Speed 20 ~ 20,000min-1 * 200 ~ 20,000min-1 10

5
Drive Method Gear Drive, 4 Step Built In 5
2 MIN RATIO
CONTINUOUS RATIO

Max. Spindle Torque 266.4 N m (196.5 ft lbs)

l l
118.0 N m (87.0 ft lbs)
l l
0 0
0 5000 10000 15000 12000 25000 30000
Spindle Motor 22kW (30HP AC/15 min) 22kW (30HP AC/15 min) Spindle Speed min-1

15kW (20HP AC/Cont.) 18.5kW (25HP AC/Cont.)

Main Spindle Power and Torque Diagram
Machine Type HX300iG, HX400iG / 15000 min-1
Torque Power
Nm 1500min-1 5850min-1 14000min-1 KW
Supercell-400 Supercell-400 5 MIN RATIO (4000min-1 ~)
●

10 MIN RATIO (0 ~ 4000min-1)

40001min-1 15 MIN RATIO ( 4000min-1 ~ 15000min-1)
30 MIN RATIO

Spindle Speed 20 ~ 15,000min-1 20 ~ 20,000min-1 Opt.* 200

95.5 m
●
CONTINUOUS RATIO 25

22kW (5 min.) 20
80
Drive Method Gear Drive, 4 Step Gear Drive, 4 Step 70N m
●

15kW (10 min., 15 min.)

60 15
Max. Spindle Torque 157.4 N m (116.1 ft lbs)
l l
157.4 N m (116.1 ft lbs)
l l
47.7N m
●
11kW (30 min.)
10
40 7.5kW (Cont.)

Spindle Motor 13kW (18HP AC/15 min) 13kW (18HP AC/15 min) 20 5

0 0
7.5kW (10HP AC/Cont.) 7.5kW (10HP AC/Cont.) 0 2000 4000 6000 8000 10000 12000 14000 15000

Spindle Speed min-1

#50 TAPER (*HSK-A100) Main Spindle Power and Torque Diagram

Machine Type HX300iG, HX400iG, SC300G / 20000 min-1
Torque Power
Mycenter-HX500iG / 630G / 800G Mycenter-HX500iG / 630G / 800G Nm ●

1500min-1 KW
2000min-1
118N m
Spindle Speed 35 ~ 12,000min-1 * 35 ~ 8,000min-1 Opt.* 1800min-1 5000min-1
●

22kW (15 min.)

18.5kW
100 (15 min.) 18.5kW (Cont.) 20
Drive Method Gear Drive, 4 Step Gear Drive, 4 Step 88.3N m
80
●

15kW
(Cont.)
76.9N m
●
15
25% ED
Max. Spindle Torque 585.9 N m (432.1 ft lbs)
l l
1225.9 N m (904.2 ft lbs)
l l 60 15 MIN RATIO
CONTINUOUS RATIO
47.7N m
● 10
40
Spindle Motor 40kW (53HP AC/15 min) 40kW (53HP AC/15 min)
20 5

22kW (30HP AC/30 Cont.) 22kW (30HP AC/30 Cont.) 0 0

0 5000 10000 15000 20000
Spindle Speed min-1

Main Spindle Power and Torque Diagram Main Spindle Power and Torque Diagram Main Spindle Power and Torque Diagram
Machine Type SC400 / 15000 min-1 Machine Type SC400 / 20000 min-1 Machine Type HX500iG / 20000 min-1
Torque Power Torque Power Torque 788min-1 Power
788min-1 -1 788min-1 8000min-1 22W (15 min.)
Nm● 8000min KW Nm●
KW Nm
●
KW
2101.7min -1 2101.7min -1
3000min-1 2101min-1
3000min-1 266.4N m 8000min-1
3000min-1
●

200 15 200 15 250

13kW (2 min-1) 25
13kW (15 min.)
224.1N m
●
15kW (Cont.)
157.48N m
●

11kW (Cont.) 157.48N m

●

150 150 11kW (30 min.) 200 20

133.2N m 133.2N m 181.4N m
●

●
10 ●
10
75kW (Cont.) 75kW (Cont.) 150 15
100 100 133.2N m
●

90.8N m
●
90.8N m
●

100 15 MIN RATIO 10

15 MIN RATIO 5 15 MIN RATIO 5 CONTINUOUS RATIO
50 30 MIN RATIO 50 30 MIN RATIO
CONTINUOUS RATIO CONTINUOUS RATIO
50 5

0 0 0 0 0 0
0 5000 10000 15000 0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000
Spindle Speed min -1
Spindle Speed min -1 Spindle Speed min-1

HORIZONTAL MACHINING CENTERS

9
 Control
Pioneering Icon CNC Operation . . .
Kitamura’s original Arumatik ®-Mi control is as powerful as it is user
friendly. By utilizing unique features such as visual work setting
screens, maintenance support functions and video guidance on the
19" LCD the Arumatik-Mi control has been designed to maximize
operator potential and performance. Advanced operation and ultra-
high speed CNC technology mean smoother and faster machining of
complex work pieces thanks to the power of High Precision Contour
Control with 1680-block look ahead, 2800/blocks per second
processing speeds. Designed to handle a variety of machining
applications from highly mixed lot, small runs to high volume
production work, the Arumatik-Mi offers the user the benefits of a
completely customizable and expandable control experience.

n Free Lifetime Software Upgrades

n Maximizes Operator Convenience

n Super-Smooth Control Process

n Customized for Ultimate Productivity

n High Speed Processing

n Fanuc User-Friendly

Unique features such as visual work setting Advanced operation and ultra-high speed CNC The Arumatik-Mi is loaded with a variety of
screens, maintenance support functions and video technology mean smoother and faster machining standard control features such as 1280M
guidance on the 19" LCD the Arumatik-Mi control of complex workpieces thanks to the power of Memory, 2GB CT/ USB Data Server, 700 Custom
have been designed to maximize operator potential High Precision Contour Control with 1680-block MacroVariables, Inverse Time feed, Coordinate
and performance. look ahead, 2800 /blocks per second processing System Rotation, 102 Pairs Workpiece
speeds. Coordinate System, 200 Tool Offsets - Just to
name a few.

Free lifetime software upgrades assure continued

optimum control features, functions and
performance.

10 HORIZONTAL MACHINING CENTERS

Standard Control Specifications
On Demand “HELP” Guidance Machining Challenges - Simplified
19” Color LCD
Fine Accel/Decel after Interpolation
Linear Interpolation (G01)
Circular/Helical/Spline Interpolation (G02, G03)
Conical Interpolation (G02.1, G03.1)
3-D Circular Interpolation (G02.4, G03.4)
Circular Cutting (G12, G13)
Dwell (G04)
Scaling (G50, G51)
Extended Workpiece Coordinate System
(102 Pairs)
Single Direction Positioning (G60)
Coordinate System Rotation (G68, G69)
Rigid Tapping
Deep-Hole Tapping Cycle
Pecking Tapping Cycle
Small-Diameter Deep-Hold Drilling Cycle
3-D Tool Compensation (G40, G41, G42)
High Speed, High Accuracy Control
Maintenance Support Function
High-Precision Contour Control
(1680 - block look ahead)
16-Million Pulse Encoder Feedback System
Background Editing
Corner Chamfering / Corner Rounding
Custom Macro B
Custom Macro Common Variables, 700 Pcs
2 GB CF/USB Data Server
Ethernet Interface
Extended Editing (Copy, Move, Change, Merge)
Registerable Programs, 1,000 Sets
1280M Memory
Inverse Time Feed
Operation Screen Display
Optional Block Skip
Playback Function
Program Restart
Tangential Speed Constant Control
Tool Life Management, 400 Sets
Tool Offset Memory C
Tool Offset Pairs, 200 Pairs
Tool Retract and Return
Tool Monitoring / Adaptive Control
Backlash Compensation

HORIZONTAL MACHINING CENTERS

11
 Control
Exciting new features and functions.
The latest in controller technology at your
fingertips.

NEW! User Customized Main Menu Touch Screen

HELP
Auto call-up of instructional information

Custom Action Buttons (CAB)

User customized Machine Actions

Convenient Visual Programming Screens

A variety of visual programming screens and functions offer the operator faster and easier methods of part
set-up and processing for increased productivity. Set-up icon screens, camera functions, data highlight
functions, remote monitoring screens, simplified probing interface and electronic manuals in PDF format
ensure all information required is at your fingertips.
12 HORIZONTAL MACHINING CENTERS
 Kitamura Monitor / Adaptive
Control
Detects tool wear and controls cutting feedrate
automatically by monitoring live spindle load
during machining. By adapting to the change in
cutting conditions tool life is maximized and
cycle time is shortened dramatically.

Maintenance Support Function

Kitamura's Maintenance Support Function offers
operator convenience in displaying methods of
machining maintenance, repair and parts
support on the NC Screen.

Collision Safety Function

Signals the machine to decelerate in any given
movement and lessens the impact should the
machine encounter a crash. Although this
feature does not avoid the effects of a crash
completely, it lessens the damage to the machine
as a result.

Should the machine crash, this feature

automatically reverses the direction of the machine
movement.

Video Guidance
Useful functions visually walk the user through
methods of battery replacement, alarm release,
APC recovery, PMC ladder and alarm
release/guidance making it easier to monitor
machine performance and ensure uptime.

HORIZONTAL MACHINING CENTERS

13
 HX250iG/HX300iG
Horizontal Machining Centers
Power and precision in an ultra-compact
footprint
If you produce moderate to long run small to medium size parts and
want higher levels of accuracy and productivity, the Mycenter-HX250iG
and HX300iG are the ideal choices. Both feature 15,000min -1 ultra-rigid
spindles standard, with 30,000min -1 (HX250iG) and 20,000min -1
(HX300iG) available. With their high levels of accuracy, these machines
are ideal for small hole drilling, highly detailed machining and a host of
artistic intricate machining applications.

Fast, efficient 2-station rotating APCs, full 4th axis DD motor driven
rotary tables, blazing feedrates and high-speed tool changes will boost
productivity to a whole new level. The HX250iG and HX300iG are
flexible in application. Smart fixturing options including 5th axis
capability on both pallets and “in-the-field” ATC expandability will
keep pace with your growing needs. Both are controlled by Kitamura’s
operator-friendly, powerful high-speed Arumatik ®-Mi CNC.

14 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

Standard 2-Station APC for drilling, milling, Field installed 5th axis capable on BOTH pallets. Standard is a powerful 15,000min-1 Dual Contact
boring, tapping, threading and more. Spindle, ideal for tougher cuts.

Interference Diagrams Mycenter-HX250iG

Max. Workpiece Size with Stroke Range
of ATC Arm

390 (15.4")
152.5 (6.0")

110 (4.3")

MAX Ø350
(Ø13.8")

82 (3.2") Tool Retract in ATC

MAX Tool Diameter 75 (3.0")

MAX Tool Length 200 (7.9")

HX250iG

620(26.8")
235 (9.3")

MAX Ø500
(Ø19.7")

115 (4.5") Tool Retract in ATC

MAX Tool Diameter 150 ( 5.9")

MAX Tool Length 350 (13.8")
HX300iG
(not pictured)

HORIZONTAL MACHINING CENTERS

15
 HX250iG/HX300iG
Horizontal Machining Centers

The HX250iG and HX300iG provide generous

work envelopes, high-speed DD motor driven full
4th Axis capability and world's fastest 60m/min
(2,362ipm) rapid feeds providing machining
flexibility for a wide variety of applications with
unwavering reliability.

The HX250iG and HX300iG feature standard 40

and 50 tool automatic tool changers respectively,
that minimize tool change times for maximum
cutting time. Kitamura’s exclusive fixed pot ATC
system assures tools are always returned to the
same pot and the next tool to be used is kept in a
“stand-by” pot. HIgher capacity ATCs can be
installed “in-the-field” - 102 tools for the
HX250iG and 200 tools for the HX300iG.

The Mycenter-HX250iG is available with an

optional 10-station APC system for flexibility in
just-in-time machining environments. The
HX300iG is available with 6 or 8 pallet APC
systems.

16 HORIZONTAL MACHINING CENTERS

 Mycenter-HX250iG Mycenter-HX300iG
Table
Table Size 254 x 254mm (10.0" x 10.0") 305 x 305mm (12.0" x 12.0")
Table Indexing 0.001 Degree (4th Axis) 0.001 Degree (4th Axis)
Tapped Hole (Size xQty.) M12 x 1.75 x 8 M16 x 2.0 x 16
Max.Table Load 100kg (220 lbs.) 250kg (550 lbs.)
Max. Workpiece Dia. Ø350mm (Ø13.8") Ø500mm (Ø19.7")
Max. Workpiece Height 400mm (15.7") 745mm (29.3")
Travels
X-Axis Travel 305mm (12.0") 460mm (18.1")
Y-Axis Travel 305mm (12.0") 510mm (20.0”)
Z-Axis Travel 330mm (13.0") 560mm (22.0”)
B-Axis Travel 0 to 360 Degrees Full 4th Axis 0 to 360 Degrees
Table Surf. to Spindle Center 60 to 365mm (2.4" to 14.4") 50 to 560mm (2.0" to 22.0")
Table Center to Spindle Nose 60 to 390mm (2.4" to 15.4") 60 to 620mm (2.4" to 24.4")
Spindle
Spindle Taper #30 NST (HSK-E40 Option / 30k) #40 NST (HSK-A63 Opt.)
Spindle Speed 150 ~ 15,000min-1 (30,000min-1 Opt.) 40 to 15,000min-1 (20,000min-1 Opt. )
Drive Method Direct Drive Direct Coupling
Maximum Spindle Torque 70.0 N m (51.6 ft lbs)
l l
95.5 N m (70.4 ft lbs)
l l­

Spindle Motor 11kW (15HP AC /30 min) 22kw (30HP AC/ 5 min)
7.5kW (10HP AC /Cont.) 15kw (20HP AC/10 min)
11kw (15HP AC/30 min)
7.5kw (10HP AC/Cont.)
Feed
Rapid Feed X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm)
Cutting Feed Rate X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm)
Rapid Feed (B-Axis) 108,000deg/min (300 min-1) 54,000deg/min (150 min-1)
APC
Number of Pallets 2 2
APC Change Time 7.9 seconds 8.5 seconds
ATC
Tool Storage Capacity 40 Tools (Opt. 52, 102) 50 Tools (Opt.100,150,200)
Tool Selection Method Random Bi-Directional, Fixed Pot Random Bi-Directional, Fixed Pot
Tool Holder Style BT 30 (HSK-E40 Opt.) CT (BT) 40 (HSK-A63 Opt.)
Max. Tool Dia. Ø50mm (Ø2.0") / Ø75mm (Ø3.0") Ø95mm (Ø3.7") / Ø150mm (5.9")
Max. Tool Length 200mm (7.9") 350mm (13.8")
Max. Tool Weight 2kg (4.4 lbs.) 10kg (22 lbs.)
Tool to Tool 1.2 seconds 1.3 seconds
Chip to Chip 2.8 seconds, min. 2.5 seconds, min.
Utilities
Power Requirement 30KVA, 200v AC, 3 Phase 45 KVA, 200v AC, 3 Phase
50 KVA, - Opt. 20,000rpm Spindle
Air Requirement 0.5 MPa, 150L/min (90psi, 6cfm) 0.5 MPa, 350L/min (90psi, 12cfm)
Machine Dimensions
Required Space (W x D) 2,330 x 2,948mm (91.7" x 116.1") 2,390 x 3,574mm (94.1" x 140.7")
Machine Height 2,470mm (97.2") 2,700mm (106.3")
Machine Net Weight 4,500kg (9,900 lbs.) 9,100kg (20,062 lbs.)
®
Control Arumatik -Mi Control Arumatik® -Mi Control

HORIZONTAL MACHINING CENTERS

Specifications subject to change without notice. 17
 HX400iG/ HX500iG
Horizontal Machining Centers
Setting the new standard in (mid-size) HMCs
The Mycenter-HX400iG is setting the new standard in 400mm
horizontal machining centers, delivering the ultimate in
state-of-the-art HMC performance. Solid box guideways are equipped
with linear scale feedback on all axes for unmatched accuracy and
optimum stability. A standard 2-station APC coupled with full 360
degree 4th axis capability means faster part turn around and more
production per pallet load. Standard features such as the world's
fastest 60m/min (2,362ipm) rapid feedrates, rear discharge hinge belt
chip conveyor and numerous high-tech Icon-Drive Arumatik ®-Mi
control features make this space-saving mid-size HMC your go to for a
variety of machining applications.

Highly efficient and productive with your choice of #40, 20,000min -1

and #50, 12,000min -1 geared configurations, the Mycenter-HX500iG
provides the power, speed and size to handle your larger and heavier
workpieces. Solid boxway construction, linear scales on all axes and a
patented twin ballscrew design in the X & Y axes deliver the highest
accuracy levels available on the market today along with the rigidity
necessary for true, heavy-duty, medium to large part machining.

18 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

Mycenter-HX400iG

Interference Diagrams
Max. Workpiece Size with Stroke Range
of ATC Arm
710 (28.0")

MAX Ø630
(Ø24.8")

115
(4.5") Tool Retract in ATC

MAX Tool Diameter 150 ( 5.9")

MAX Tool Length 370 (14.6")

HX400iG

#40 1,070 (43.1")

Mycenter-HX500iG
Available in #40 and #50 Geared Spindle Configurations

MAX Ø800
(Ø31.5")

115 (4.5") Tool Retract in ATC

MAX Tool Diameter 170 ( 6.7")

MAX Tool Length 600 (23.6")
HX500iG

#50
460 (18.1")

MAX Ø800
(Ø31.5")

165 (6.5") Tool Retract in ATC

MAX Tool Diameter 300 (11.8")

MAX Tool Length 600 (23.6")
HX500iG

HORIZONTAL MACHINING CENTERS

19
 HX400iG / HX500iG
Horizontal Machining Centers

Both the HX400iG and HX500iG feature our

exclusive standard 50 -Tool Fixed Pot ATC.
In-the-field tool capacity expansion up to 300
These machines are designed for total
tools depending on model is available.
convenience and optimum work flow. One piece
Ultra-fast tool-to-tool change times of 1.3
sliding front doors, larger windows and easy grip The two station APC offers the ability to add seconds (40 taper) and 2.1 seconds (50 taper)
door handles reduce operator work load and pallets and pallet pool systems in the field. optimizes machine performance.
promotes a safe work environment. The feature The large work envelope houses standard 4th
packed Arumatik®-Mi CNC swings toward the axis rotary tables that allow full 360° 4th axis
extra large operator window for convenient and capability simplifying machining of more
mobile work set-up and inspection. Even the complex, multi-sided parts.
maintenance cabinet is conveniently located next
to the operation station.

Linear Axes (X, Y, Z) Standard Rotary Table (B-Axis) Standard

State-of-the-art, fine resolution (10 nanometer) High resolution (0.02 Sec.)
Optical Linear Scale Feedback Direct Rotary Scale Feedback
Long-term, highest in-class accuracy. Minimum displacement even at outer
edges of table limit.
Kitamura uses only the highest quality world-class scale units available, while competitors claim to
deliver the same high level accuracy with lesser grade units.
Standard on Mycenter-HX400iG, HX500iG, HX630G and HX800G Models.
Insist on the best – Kitamura HMC’s.

20 HORIZONTAL MACHINING CENTERS

 Mycenter-HX400iG Mycenter-HX500iG #40 Mycenter-HX500iG #50
Table
Table Size 400 x 400mm (15.7" x 15.7") 500 x 500mm (19.7" x 19.7") 500 x 500mm (19.7" x 19.7")
Table Indexing 0.001 Degree (4th Axis) 0.001 Degree (4th Axis) 0.001 Degree (4th Axis)
Tapped Hole (Size xQty.) M16 x 2.0 x 25 M16 x 2.0 x 24 M16 x 2.0 x 24
Max.Table Load 350 /400kg (770 /880 lbs.) 800kg (1,760 lbs.) 800kg (1,760 lbs.)
Max.Workpiece Dia. Ø630mm (Ø24.8") Ø800mm (Ø31.5") Ø800mm (Ø31.5")
Max.Workpiece Height 745mm (29.3") 1,100mm (43.3") 1,100mm (43.3")
Travels
X-Axis Travel 610mm (24.0") 870mm (34.3")/Twin Ballscrew Design 870mm (34.3")/Twin Ballscrew Design
Y-Axis Travel 610mm (24.0") 800mm (31.5")/Twin Ballscrew Design 800mm (31.5")/Twin Ballscrew Design
Z-Axis Travel 610mm (24.0") 930mm (36.6") 930mm (36.6")
B-Axis Travel 0 to 360 Degrees Full 4th Axis 0 to 360 Degrees Full 4th Axis 0 to 360 Degrees Full 4th Axis
Table Surf. to Spindle Center 40 ~ 650mm (1.6" to 25.6") 50 ~ 850mm (2.0" ~ 33.5") 50 ~ 850mm (2.0" ~ 33.5")
Table Center to Spindle Nose 100 ~ 710mm (3.9" to 27.9") 140 ~ 1,070mm (5.5"~42.1") 60 ~ 990mm (2.4" ~ 39.0")
Spindle
Spindle Taper #40 NST (HSK-A63 Opt.) #40 NST (HSK-A63 Option) #50 NST (HSK-A100 Opt.)
Spindle Speed 40 ~ 15,000min-1 (20,000min-1 Opt.) 20 ~ 20,000min-1 35 ~ 12,000min-1 (8,000min-1 Opt.)
Drive Method Direct Drive System Gear Drive, 4-Step Gear Drive, 4-Step
Maximum Spindle Torque 95.5 N m (70.4 ft lbs)
l l­
266.4 N m (196.5 ft lbs)
l l
585.9 N m (432.1 ft lbs)
l l

Spindle Motor 15kW (20HP AC /10 min) 22kW (30HP AC /15 min) 40kW (53HP AC /15 min)
7.5kW (10HP AC /Cont.) 15kW (20HP AC /Cont.) 22kW (30HP AC / Cont.)
Feed
Rapid Feed X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm) 60m/min (2,362ipm)
Cutting Feed Rate X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm) 60m/min (2,362ipm)
Rapid Feed (B-Axis) 45,000 deg/min (125min-1 ) 43,200deg/min (120min-1 ) 43,200deg/min (120min-1 )
APC
Number of Pallets 2 2 2
APC Change Time 8.5 seconds 8.8 seconds 8.8 seconds
ATC
Tool Storage Capacity 50 Tools (Opt. 100,150, 200) 50 Tools (Opt. 100, 150, 200) 50 Tools (Opt. 62, 100, 150, 200)
Tool Selection Method Random bi-directional, Fixed Pot Random bi-directional, Fixed Pot Random bi-directional, Fixed Pot
Tool Holder Style CT (BT) 40 (HSK-A63 Opt.) CT (BT) 40 (HSK-A63 Opt.) CT (BT) 50 (HSK-A100 Opt.)
Max. Tool Dia. Ø95mm (Ø3.7") / Ø150mm (Ø5.9") Ø95mm (Ø3.7") / Ø170mm (Ø6.7") Ø125mm (Ø4.9") /Ø300mm (Ø11.8")
Max. Tool Length 370mm (14.6") 600mm (23.6") 600mm (23.6")
Max. Tool Weight 10kg (22 lbs.) 10kg (22 lbs.) 30kg (66 lbs.)
Tool to Tool 1.3 seconds 1.3 seconds 2.1 seconds
Chip to Chip 2.5 seconds, min. 3.8 seconds, min. 4.8 seconds, min.
Utilities
Power Requirement 50KVA, 200v AC, 3 Phase 55KVA, 200v AC, 3 Phase 55KVA, 200v AC, 3 Phase
Air Requirement 0.5 MPa, 350L/min (90psi, 12cfm) 0.5 MPa, 410L/min (90psi, 14cfm) 0.5 MPa, 410L/min (90psi, 14cfm)
Machine Dimensions
Required Space (W x D) 3,035 x 4,065mm (119.5" x 160.0") 3,585 x 4,957mm (141.1" x 195.2") 3,620 x 4,957mm (142.5" x 195.2")
Machine Height 2,739mm (107.8") 3,178mm (125.1" ) 3,499mm (137.8")
Machine Net Weight 9,800kg (21,560 lbs.) 16,100kg (35,420 lbs.) 16,500kg (36,300 lbs.)
Control Arumatik®-Mi Arumatik®-Mi Arumatik®-Mi

Specifications subject to change without notice.

HORIZONTAL MACHINING CENTERS

21
 HX630G / HX800G
Horizontal Machining Centers
Designed to tackle the toughest large part
machining challenges
The Mycenter-HX630G and HX800G are designed for high-value,
close-tolerance machining of large components and fixtured tombstones.
Extraordinary capacity, superior design and construction features and superb
accuracy make them the ideal choice in large capacity HMCs.
Use of proven techniques such as induction hardened solid boxway
construction, hand-scraping of all mating surfaces and geared spindles all
contribute to superior results and stability when machining larger heavy-duty
parts made of tough-to-cut materials.

n 53HP, gear driven spindles provide the

necessary torque for tough cuts and
high-end power for fine finishes
n Patented twin ballscrews on all axes are
driven by twin servo motors to deliver
blazing “world’s fastest” 60m/min
(2,362ipm) rapid feedrates on solid box ways
n Linear scale feedback is standard on all
axes delivering stellar accuracy and
repeatability
n Standard full 4th axis rotary table with
rotary scale
n Kitamura’s Intelligent Advanced Control
(IAC) System minimizes thermal
displacement to less than 5 microns
(0.0002")
n Standard Double Decker style chip
conveyor and filtration system and 15bar
(220psi) coolant thru the spindle

22 HORIZONTAL MACHINING CENTERS

 Interference Diagrams Machining Challenges - Simplified
Max. Workpiece Size with Stroke Range
of ATC Arm
1150 (45.2")
Mycenter-HX630G

MAX Ø1080
(Ø42.5")

168 (6.6") Tool Retract in ATC

MAX Tool Diameter 320 (12.6")

MAX Tool Length 650 (25.6")

HX630G

1550 (61.0")
770 (30.3")

MAX Ø1525
(Ø60.0")
168 (6.6") Tool Retract in ATC Mycenter-HX800G

MAX Tool Diameter 320 (12.6")

MAX Tool Length 800 (31.5")

HX800G

HORIZONTAL MACHINING CENTERS

23
 HX630G / HX800G
Horizontal Machining Centers

The Mycenter-HX630G and HX800G feature Expansive in both size and capability, the HX630G and HX800G come standard with full 360°
53HP, high-torque, 4-step gear driven 4th axis simultaneous machining capabilities needed to machine complex, multi-sided parts,
spindles that deliver high-efficiency cutting greatly reducing set-up time. In addition, the 2-station automatic pallet changer allows for the
performance with low energy consumption. loading of parts while machining, dramatically improving spindle cutting time while allowing
8,000min-1 and 12,000min-1 configurations for in-process verification of component quality. Large table capacities easily accommodate
are available. extra-large workpieces and complex fixturing.

Flexibility meets profitability with Kitamura’s

patented high-speed, fixed pot ATC system.
Accurate and effective tool changes and tool
identification are ensured – minimizing tool
change time. The 50 tool standard magazine can
easily be upgraded in the field with up to 200
tools for easy expandability as your needs grow.

The Mycenter-HX630G and HX800G are

designed to handle your largest part machining
requirements. They easily handle workpieces up
HX630G 1,300mm (51.2")

HX800G 1,550mm (61.0")

to ø1,080 x 1,300mm (ø42.5"x 51.2") and

HX630G Ø1,080mm (Ø42.5") ø1,525mm x 1,550mm (ø60.0 x 61.0")
HX800G Ø1,525mm (Ø60.0") respectively. The HX630G has a table load
capacity of 1,500kg (3,300Lbs), the HX800G
table load capacity is 3,000kgs (6,600Lbs).
HX630G & HX800G Work Envelopes

24 HORIZONTAL MACHINING CENTERS

HOR AKI REVS JAN4.qxp_Layout 1 1/4/17 3:48 PM Page 25

Mycenter-HX630G Mycenter-HX800G
Table
Table Size 630 x 630mm (24.8" x 24.8") 800 x 800mm (31.5" x 31.5")
Table Indexing 0.001 Degree (4th Axis) 0.001 Degree (4th Axis)
Tapped Hole (Size x Qty.) M16 x 2.0 x 25 M16 x 2.0 x 49
Max.Table Load 1,500kg / (3,300 lbs.) 3,000kg (6,600 lbs.) *With Limitations
Max.Workpiece Dia. Ø1,080mm (Ø42.5") Ø1,525mm (Ø60.0")
Max.Workpiece Height 1,300mm (51.2") 1,550mm (61.0")
Travels
X-Axis Travel 1,100mm (43.3") / Twin Ballscrew Design 1,550mm (61.0") / Twin Ballscrew Design
Y-Axis Travel 920mm (36.2") / Twin Ballscrew Design 1,300mm (51.2") / Twin Ballscrew Design
Z-Axis Travel 1,050mm (41.3") / Twin Ballscrew Design 1,400mm (55.1") / Twin Ballscrew Design
B-Axis Travel 0 to 360 Degrees Full 4th Axis 0 to 360 Degrees Full 4th Axis
Table Surf. to Spindle Center 100 ~ 1,020mm (3.9" ~ 40.2") 100 ~ 1,400mm (3.9" ~ 55.1")
Table Center to Spindle Nose 100 ~ 1,150mm (3.9" ~ 45.3") 150 ~ 1,550mm (5.9" ~ 61.0")
Spindle
Spindle Taper #50 NST (HSK-A100 Opt.) #50 NST (HSK-A100 Opt.)
Spindle Speed 35 ~ 12,000min-1 (8,000min-1 0pt.) 35 ~ 12,000min-1 (8,000min-1 0pt.)
Drive Method Gear Drive, 4 Step Gear Drive, 4 Step
Maximum Spindle Torque 585.9 N m (432.1 ft lbs)
l l
585.9 N m (432.1 ft lbs)
l l

Spindle Motor 40kW (53HP AC /15 min) 40kW (53HP AC /15 min)
22kW (30HP AC /Cont.) 22kW (30HP AC /Cont.)
Feed
Rapid Feed X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm)
Cutting Feed Rate X,Y,Z 60m/min (2,362ipm) 60m/min (2,362ipm)
Rapid Feed (B Axis) 12,000 deg/min (33.3min-1) 8,000 deg/min (22.2min-1)
APC
Number of Pallets 2 2
APC Change Time 14.7 seconds 23.0 seconds
ATC
Tool Storage Capacity 50 Tools 50 Tools
(Opt. 62,100,150, 200) (Opt. 62,100,150, 200)
Tool Selection Method Random bi-directional, Fixed Pot Random bi-directional, Fixed Pot
Tool Holder Style CT (BT) 50 CT (BT) 50
Max. Tool Dia. Ø125mm (Ø4.9") / Ø320mm (Ø12.6") Ø125mm (Ø4.9") / Ø320mm (Ø12.6")
Max. Tool Length 650mm (25.6") 650mm (25.6")
Max. Tool Weight 30kg (66 lbs.) 30kg (66 lbs.)
Tool to Tool 2.1 seconds 2.1 seconds
Chip to Chip 5.2 seconds, min. 5.9 seconds, min.
Utilities
Power Requirement 65KVA, 200v AC, 3 Phase 70KVA, 200v AC, 3 Phase
Air Requirement 0.5 MPa, 410L/min (90psi, 14cfm) 0.5 MPa, 410L/min (90psi, 14cfm)
Machine Dimensions
Required Space (W x D) 4,068 x 5,760mm (160.2" x 226.8") 4,295 x 7,119mm (69.1" x 280.3")
Machine Height 3,513mm (138.3") 3,554mm (139.9")
Machine Net Weight 21,000kg (46,200 lbs.) 28,400kg (62,480 lbs.)
Control Arumatik®-Mi Arumatik®-Mi

HORIZONTAL MACHINING CENTERS

Specifications subject to change without notice. 25
 SC300G / SC400
5-Axis Machining Cells
The solution to today's complex
production demands.
Kitamura’s Supercell Series is the perfect FMC for today’s fast-paced,
multi-part machining applications. The combination of Kitamura’s exclusive
high-speed Automatic Work Handling Robot (AWC), powerful control
capabilities and pallet ID recognition system enables 72 hour unmanned
operation. Efficient chip management is provided by a standard Double Decker
Style Chip Conveyor (Combination Caterpillar & Scraper).

n J.I.T. optimized
n Dramatically reduced set-up times
n Holder-style pallets simplify fixture
change-outs
n 3-5 Times improved parts accuracy
n Continuous unmanned operations
without use of a cell controller

26 HORIZONTAL MACHINING CENTERS

 Machining Challenges - Simplified

The Supercells’ extraordinary control and pallet

processing capabilities allow for streamlined
multi-part varied-lot machining.

To ensure proper machine operation, a

Work ID System employs an IC Chip on the
pallet allowing for storage and communication
of work data quickly and accurately.

Supercell-400

HORIZONTAL MACHINING CENTERS

27
 SC300G / SC400
5-Axis Machining Cells

The spindle travels in the X and Y axes while the table travels in the Z axis. This provides Supercells are designed to handle a wide variety
optimum tool approach to the workpiece. Absolute scale feedback is standard on all axes. of workpieces. The Supercell 300G has a
X, Y, Z Axes resolution is 0.0001mm, A & B Axes resolution is 0.0001 degree. maximum workpiece size of ø200 x 200mm H
The Supercell 300G is equipped with a standard high-speed 20,000min-1 spindle. The (ø7.9" x 7.9" H). The Supercell 400 handles
Supercell 400 has a standard powerful 15,0000min-1 spindle with a 20,000min-1 high-speed workpieces up to ø400 x 300mm H
spindle available as an option. (ø15.7" x 11.8" H).

Kitamura designed the original high-speed Generous work envelope houses trunnion style
Automatic Work Handling Robot (AWC) table for full simultaneous 5-axis machining.
exclusively for the Supercell. This system Supercells can be equipped with up to 120
reduces pallet load & unloading time, pallets and a 314 tool capacity as optional
allowing just-in-time operation, ideal for depending on model.
highly mixed production.

28 HORIZONTAL MACHINING CENTERS

 Mycenter-Supercell 300G Mycenter-Supercell 400
Table
Pallet Size Ø200mm (Ø7.9") Ø350mm (Ø13.8)
Table Indexing 0.001 Degree (4th / 5th Axes) 0.001 Degree (4th / 5th Axes)
Maximum Pallet Load 20kg (44 lbs.) 80 kg (176 lbs.)
Max. Workpiece Dia. x H Ø200 x 200mm (Ø7.9" x 7.9") Ø400 x 300mm (Ø15.7" x 11.8")
Travels
X-Axis Travel 460mm (18.1") 510mm (20.1")
Y-Axis Travel 410mm (16.1") 510mm (20.1")
Z- Axis Travel 460mm (18.1") 510mm (20.1")
A-Axis Travel +30 to -120 Degrees (*with some restrictions) 0 to -100 Degrees (*with some restrictions)
B-Axis Travel 0 to 360 Degree 0 to 360 Degree
B-Axis Ctr. to Spindle Nose 60mm ~ 520mm (2.4"~20.5") 100mm ~ 610mm (3.9" ~ 24.0")
Table Surface to Spindle Ctr. -100mm ~ 410mm (-3.9" ~ 16.1") -200mm ~ 310mm (-7.9" ~ 12.2")
Spindle
Spindle Taper NST. No. 40 NST. No. 40
Spindle Speed 200 ~ 20,000min-1 20 ~ 15,000min-1 (20 ~ 20,000min-1 Opt.)
Drive Method Built-In Gear Drive, 4 Step
Maximum Spindle Torque 118.0 N m (87.0 ft lbs)
l l
157.4 N m (116.1 ft lbs)
l l

Spindle Motor 22kw (30 HP AC) /15 min 13kw (18 HP AC) / 15 min
18.5kw (25 HP AC) / Cont. 11kw (15 HP AC) / 30 min.
Feed
Rapid Feeds X, Y, Z 60m/min (2,362ipm) 50m/min (1,969ipm)
Feed Rates A-Axis / B-Axis 18,000 deg/min (50min-1) / 18,000 deg/min (50min-1) 2,400 deg/min (6.7min-1) / 12,000deg/min (33.3 min-1)
Cutting Feed Rates 60m/min (2,362ipm) 50m/min (1,969ipm)
APC
Number of Pallets 20 (40, 80 Opt.) 20 (40, 80 Opt.)
ATC
Tool Storage Capacity 174 Tools (230, 258, 314 Opt. ) 140 Tools (190, 290 Opt. )
Tool Selection Method Random bi-directional, Fixed Pot Random bi-directional, Fixed Pot
Tool Holder Style MAS CT (BT) 40 MAS CT (BT) 40
Max. Tool Diameter Ø95mm (Ø3.7") / Ø150mm (Ø5.9") Ø95mm (Ø3.7") / Ø150mm (Ø5.9")
Max. Tool Length 350mm (13.7") 350mm (13.7")
Max. Tool Weight 10kg (22.0 lbs.) 10kg (22.0 lbs.)
Tool to Tool Change Time 1.3 seconds 2.1 seconds
Chip to Chip Change Time 2.5 seconds, min. 5.0 seconds, min.
Utilities
Power Requirement 55 KVA, 200v AC, 3 Phase 45 KVA, 200v AC, 3 Phase
Air Requirement 0.5MPa, 350 L/min (90 psi, 13 cfm) 0.5MPa, 350 L / min (90 psi, 13 cfm)
Required Space (W x D) 3,835 x 6,006mm (151.0" x 236.5") 4,107 x 6,042mm (161.7" x 237.9")
Machine Height 2,682mm (105.6") 2,712mm (106.8")
Machine Net Weight 14,280kg (31,416 lbs.) 18,800kg (41,360 lbs.)
Control Arumatik -Mi ®
Kitamura-Fanuc 30iB

HORIZONTAL MACHINING CENTERS

Specifications subject to change without notice. 29
 OPTIONS
Flexibility to produce parts with optimum
efficiency and precision . . .
Expand machining capability with a wide variety of optional accessories
to meet your exacting machining requirements.

Laser Non-Contact Tool Probe

High Capacity, Double-Decker Chip

Conveyor
(Standard on HX500G, HX630G, HX800G,
SC300G / SC400)

Primary conveyor removes all chip types

and sizes including strings and balls.

Lower drag-type separator conveyor

removes fines that are passed
Spindle Probe through or carried back into the
system by the primary conveyor
Field Retrofittable 5th Axis Rotary
Permanent self-cleaning
Tables media drum separates fines
from the coolant to 100
micro nominal

30 HORIZONTAL MACHINING CENTERS

Production Monitoring Software
Machining Challenges - Simplified

Field Expandable Options Factory Installed Option

Kitamura Flexible Manufacturing

Systems

Kitamura Multi-Pallet Systems

Available in 8, 10, 14 and 21 APC configurations

Available Matrix Style

Tool Changer

100 Tool ATC 150 Tool ATC

HORIZONTAL MACHINING CENTERS

31
 Mycenter-HX250 iG

252.6
(9.9")
DOOR OPEN RANGE DOOR OPEN RANGE
390
850 (33.5") (15.4")

(3")
75
Ø350

1073 (42.2")
998 (39.3")
(Ø13.8")

1253 (49.3")
Y STROKE

(15.7")
(12")
305

400
2160 (85.0")
2469.6 (97.2")

1955 (77")
330 60

(2.4")
1134 (44.6")
812 (32")

60
(13") (2.4")
Z STROKE

879 (34.6")
(9.9")
252
152.5 152.5
(2.8")
(6") (6") 70 1484.3 (58.4") 1463.5 (57.6")
(1.9")
47

305
(12") 2947.8 (116.1")
X STROKE 96.5
30.8
(1.2") 1743 (68.6") (3.8")
294.2
(11.6")
2164.5 (85.2")
(12.8")
325

(40.2")
1020

1377 (54.2")
1650 (65")
1818 (71.6")
2830.3 (111.4")

152.5 152.5
(6") (6")

X STROKE
305 (12")
(18.7")
475

254
( 10")
(17.4")
(6.1")
155

443

127 330
(6.6")

60
168

(5") (13") (2.4")

P0WER SUPPLY
687.4 (27.1")

Z STROKE

52.3 100
(3.9") 10.5
(2.1") 1335 (52.6") 1450 (57.1") (0.4")
2947.8 (116.1")

Move-In Dimensions
Required Space W x D: 1,871 x 2,948mm (73.7" x 116.1")
Machine Height: 2,170mm (85.4")
Machine Net Weight: 4,500kg (9,900Lbs)
Power Requirement: 30KVA
Specifications subject to change without notice.

32 MYCENTER - HX250iG
Mycenter-HX300 iG
850 (33.5")
X-AXIS STROKE
460 DOOR OPEN RANGE
235 (18.1") 225 682.4(26.9")
50ATC (9.3") (8.9")
MAGAZINE

(16.9")
(16.9")

430

(13.3")
430

338
Ø500
(Ø19.7")

745 (29.3")
2700 (106.3")

STROKE
Y-AXIS
(20.1")
305
2270 (89.4")

510
1938 (76.3")
( 12")

2270 (89.4")
2264 (89.1")

(2")
50
1473 (58")

1192 (46.9")
525 (20.7")

(13.1")
332
150 60
(3.5")
89
1050 (41.3") 835 (32.9") (5.9") 560 (22") (2.4")
2200 (86.6") Z-AXIS STROKE
183 100
(7.2") 2390 (94.1") (3.9") 1773.5 (69.8") 1700 (66.9")
2573 (101.3") 3573.5 (140.7")

105 450
(4.1") (17.7") 1441 (56.7") 1577.5 (62.1")

(7.2")
183
(7.2")

350
183

(13.8") CHIP CONVEYOR

COOLANT TANK
(14")
355

MAGAZINE
50ATC

1405 (55.3")
1050 (41.3")

POWER SUPPLY
(Ø5.9")
Ø150

305
(9.3")

( 12")
2573 (101.3")

235
1885 (74.2")
2390 (94.1")

X-AXIS STROKE
(18.1")
460
(Ø43.30")0
835(32.9")

985(38.8")
Ø11

(8.9")
(Ø19.70")

225
Ø50

CONTROL BOX
(5.9")
150

Z-AXIS STROKE 60
560 (22") (2.4")
105 290 300 300 MAINTENANCE AREA
(4.1") (11.4") (11.8") (11.8") 620 (24.4")
459.1
1878.5 (74") 1695 (66.7") (18.1")
3573.5 (140.7") 896.5 (35.3")

Move-In Dimensions
Required Space W x D: 2,200 x 3,574mm (86.6" x 140.7")
Machine Height: 2,265mm (89.1")
Machine Net Weight: 9,100kg (20,062 lbs.)
Power Requirement: 45KVA
Specifications subject to change without notice.

MYCENTER-HX300iG
33
 Mycenter-HX400 iG
DOOR OPEN RANGE
793 (31.2")
X-AXIS STROKE
610 (24")
DOOR OPEN RANGE
305 305
480

(14.9")
(14.1")
357

379
(12") (12")
(12.8")
(2.1")
326

(18.9")
53

50 ATC MAGAZINE

Ø630
(Ø24.8")
2686 (105.7")

745 (29.3")

Y-AXIS STROKE
610 (24")
2739 (107.8")
2360 (92.9")

400
( 15.7")

860 (33.9")
2028 (79.8")
1335 (52.6")

(1.6")
1227 (48.3")

40
995 (39.2")
1092 (42.99")

(13.1")
332
(1.9")
47

610 (24") 100 (3.9")

960 (37.8") 960 (37.8")
515 Z-AXIS STROKE
105
(20.3") 165 (4.1") 2047 (80.6") 1913 (75.3")
468 (6.5")
(18.43") 2600 (102.4") 4065 (160")
207
(8.1") 3068 (120.79")
3275 (128.9")

4517.6 (177.9")
100
517.6
(8.1")
207

(3.9") 3900 (153.5") (20.4") COOLANT TANK

500L
POWER SUPPLY

200V
837 (33") 1441(56.7") 1622 (63.9") 45KVA
(1.6")
(18.4")
40
468

(18.43")
468
515(20.3")

MAGAZINE
50ATC

(24")
610

1943 (76.5")
3275 (128.9")

3068 (120.8")

2600 (102.4")

960 (37.8")

865 (34.1")

400
( 15.7")
1920 (75.6")

CONTROL BOX
960 (37.8")

1125 (44.29")
1125 (44.3")
(Ø56.3")
Ø1430

(Ø24.8")
Ø630
(6.5")
165

Z-AXIS STROKE 100 MAINTENANCE AREA

610 (24") (3.9")
100 387 400 400
(3.9") (15.2") (15.7") (15.7") 710 (28") 65
(2.6")
4000 (157.5") 1000 (39.4")

OPERATION PANEL
Move-In Dimensions
Required Space W x D: 2,085 x 4,000mm (82.7" x 157.5")
Machine Height: 2,335mm (91.9")
Machine Net Weight: 9,800kg (21,560Lbs)
Power Requirement: 45KVA
Specifications subject to change without notice.

34 MYCENTER - HX400iG
Mycenter-HX500 iG #40/#50 TAPER

X-AXIS STROKE DOOR OPEN RANGE

870 (34.2") 615
465 405 (24.2)
(18.3") (15.9") DOOR OPEN RANGE

850 (33.5")

Ø800
(Ø31.5")
3499 (137.8")

1100 (43.3")
Y-AXIS STROKE

3177.5 (125.1")
800 (31.5")
500
( 19.7")

2854 (112.4")
(2")
50

1285 (50.6")
Z-AXIS STROKE 60
(1.9")

930 (36.6") (2.4")

47

2678.7 (105.5") 2097.3 (82.6")

1100 (43.3") 1100 (43.3") 105 77
430 (4.1") 4775 (188") (3")
990 (39") 2200 (86.6") (16.9")
4957 (195.2")
3620 (142.5")

5397.6 (212.5")
105 517.6
(4.1") 4775 (188") (20.4")
1674 (65.9") 1311 (51.6") COOLANT TANK
500L

878 (34.6")
990 (39")

2090 (82.3")
1212 (47.7")
(Ø701800
.9")
3190 (125.6")

Ø
3620 (142.5")

(15.9") (18.3")

X-AXIS STROKE
870 (34.2")
405 465
2200 (86.6")

CONTROL BOX
(Ø3 Ø800
)
1.5"

1317.3 (51.9")

POWER SUPPLY
(16.9")
430

Z-AXIS STROKE
POWER SUPPLY
930 (36.6") 60 (2.4") 0.5 MPa
410 l/min(ANR) 55KVA
445 (17.5") 500 (19.7") 500 (19.7") 990 (38.9")
105 77
(4.1") 2678.7 (105.5") 2096.3 (82.5") (3")
1013
4957 (195.16") (39.9")

OPERATION PANEL

Move-In Dimensions
Required Space W x D: 2,810 x 4,880mm (110.6" x 192.1")
Machine Height: 2,854mm (112.4")
Machine Net Weight: #40 16,100kg (34,250Lbs); #50 16,500kg (36,300Lbs) #50 Taper drawings shown.
Power Requirement: 55KVA
Specifications subject to change without notice.

MYCENTER-HX500iG #40 / #50

35
 Mycenter-HX630 G
X-AXIS STROKE
1100 (43.3") DOOR OPEN RANGE
DOOR OPEN RANGE 700
550 550 (27.6")
(21.7") (21.7")

1200 (47.2")

Ø1080
3513 (138.3")

(Ø42.5")

Y-AXIS STROKE
1300 (51.2")

920 (36.2")
3214.5 (126.6")
630

2891 (113.8")
( 24.8")

1172 (46.1")

(3.9")
100
3258 (128.3") Z-AXIS STROKE 100
(1.9") 1050 (41.3") (3.9")
47

1375 (54.1") 1375 (54.1")

810 508 3430 (135") 2060 (81.1")
(31.9") 2750 (108.3") (20") 140 130
(5.5") 5490 (216.1") (5.1")
4068 (160.2")
5760 (226.8")

6182.6 (243.4")
140 552.6
(5.5") 5490 (216.1") (21.8")
2294 (90.3") 1441 (56.7") 1895 (74.6")

878.9 (34.6")
810 (31.9")

MAGAZINE

COOLANT TANK
50ATC

2185 (86")
1306.1 (51.4")
(Ø972480
.6")
Ø

POWER SUPPLY
3560 (140.2")
4068 (160.2")

(21.7")
550
X-AXIS STROKE
1100 (43.3")
2750 (108.3")

(21.7")
550

3258 (128.3")
(Ø42.5080
")

CONTROL BOX
Ø1

1883 (74.1")
(20")
508

Z-AXIS STROKE 100

1050 (41.3") (3.9")
600 700 700
(23.6") (27.6") (27.6") 1150 (45.3")
140 130
(5.5") 3430 (135") 2060(81.1") (5.1")
5760 (226.8") #50 50ATC DDC

OPERATION PANEL
Move-In Dimensions
Required Space W x D: 3,258 x 5,630mm (128.3" x 221.7")
Machine Height: 2,891mm (113.8")
Machine Net Weight: 21,000kg (46,200Lbs)
Power Requirement: 65KVA

Specifications subject to change without notice.

36 MYCENTER - HX630G
Mycenter-HX800 G
DOOR OPEN RANGE
1610 (63.4")
X-STROKE
1550 (61")
775 775 DOOR OPEN RANGE
(30.5") (30.5") 780

(17.5")
(17.5")

444.5
444.5
(30.7")
50 ATC MAGAZINE

Ø1525 (Ø60")

1400 (55.1")
1550 (61")

1300 (51.2")
Y-STROKE
3553.5 (139.9")
800
3513 (138.3")

2777 (109.3")

3062 (120.6")
( 31.5")

(37.8")
960

(46.9")
1192 (46.9")

1192
(3.9")
100
(34.6")
880

(1.9")
(13.1")

Z-STROKE 150

47
332

1400 (55.1") (5.9")

1855 (73") 1855 (73")
29.8 555
(1.2") (21.9") 3710 (146.1") 404
6715 (264.4") (15.9")
4294.8 (169.1")
7119 (280.3")

7267.6 (286.1")
148.6
(1.2")
29.8

3230 (127.2") 1441 (56.7") 50ATC MAGAZINE 2448 (96.4") (5.9")

(21.9")
555

834 (32.8")
(Ø60") 5
Ø152
1855 (73")
4294.8 (169.1")

(30.5")
775
3710 (146.1")

X-STROKE
( 31.5")

1550(61")
800

(30.5")
775

CONTROL BOX
1855 (73")

(Ø1283275
.9")

Ø1525
(Ø60")
Ø

POWER SUPPLY
(17.4")

342
441

(13.5")

Z-STROKE 150
1400 (55.1") (5.9") 4140 (163")
925 (36.4") 875 (34.4") 875 (34.4") 1550 (61")
404
4480.5 (176.4") 2234.5 (88") (15.9")
7119 (280.3")

Move-In Dimensions
Required Space W x D: 2,990 x 5,553mm (117.7" x 218.6")
Machine Height: 3,145mm (123.8")
Machine Net Weight: 28,400kg (62,480Lbs)
Power Requirement: 70KVA

Specifications subject to change without notice.

MYCENTER-HX800G
37
 Mycenter-SC300 G
X-STROKE

454 (17.9")
460 (18.1")

120 (4.7")
174 ATC MAGAZINE 305 (12") 155(6.1")

230.2
(9.1")

(13.1")
334
30° 120°

(10.2")
260
Ø200

200 (7.9")
(Ø7.9")

Y-STROKE
(18.1")

2682 (105.6")
460
2682.2 (105.6")

2228 (87.7")
2221 (87.4")
1997.8 (78.7")

(7.9")
200

1005.3
(39.6")
(55.1)
1018 (40.1")

1400
460 60
(18.1") (2.4")

(1.9")
47
AREA SENSOR Z-STROKE
1500 (59.1") 2270 (89.4") 925.9 (36.5") 1605 (63.2") 1955 (77") 1050 (41.3")
436.5
3770(148.4") 5535.9 (217.9") (17.2")
5972.4 (235.1")
SUB-CONTROL PANEL

5875.6 (231.3")
428.6 225
920(36.2")

(16.9") 5222 (205.6") (8.9")

(3.9")
100

1485 (58.5")
1413.1 (55.6")

1360 (53.5")

1360 (53.5")
174 ATC MAGAZINE (0.8")
20

(4.9")
125
3785 (149")
5227.6 (205.8")

AWC ROBOT
(3.9")
100

3685 (145.1")
1285 (50.6")
1356.9 (53.4")

305 (12")
(Ø6.7")

350 (13.8")
Ø170
MAGAZINE
20 PALLET

2200 (86.6")
2045 (80.5")
2271.9 (89.4")

(18.1")
460

X-STROKE

915 (36")
(Ø7.9")0
915(36")

Ø20

135(5.3")
155 (6.1")

460 (18.1") 60 (2.4")

Z-STROKE

1100 452.3 600 209.2

855 (33.7") (43.3") (17.8") (23.6") (8.2") CHIP CONVEYOR

925.9 (36.5") 1605 (63.2") 1955 (77") 1261.5 (49.7")

(20.6")
522.6

5972.4 (235.1")

SUB-CONTROL PANEL

Specifications subject to change without notice.

38 MYCENTER -Supercell 300G

Mycenter-SC400

3844.3 (151.4")
262.3
(10.3") 2595 (102.2") 987 (38.9")

(6.7")
170
Ø400

(3.4")
(Ø15.7")

85.2
AREA SENSOR

(17.9")
455

(11.8")
300

(12.2")
310
100
1092 (43")

Y STROKE
2712 (106.8")

(20.1")
510

2627.2 (103.4")
2495 (98.2")
(7.9")
200
995 (39.2")
Z STROKE
28.4 510 100
2857.3 (112.5") 1249.1 (49.2") (1.1") (20.1") (3.9")

(1.9")
47
610 (24")
4134.8 (162.8") 1832.6 (72.1") 736 (29") 1525(60") 1480 (58.3") 260 208
5573.6 (219.4") (10.2") (8.2")
6041.6 (237.9")

COOLANT TANK
CHIP CONVEYOR
ATC MAGAZINE 140ATC MAGAZINE
SUB PANEL
1018.5 (40.1")

492
(19.4") 1336.2 (52.6") 1513 (59.6") 2492 (98.1")
1613.1 (63.5")

(10.3")
262.3
381.5
(15")

20APC MAGAZINE

(27.6")
700
(20.5")
5534.8 (217.9")

520
2857.3 (112.5")
4516.3 (177.8")

3395 (133.7")
4106.4 (161.7")

1375 (54.1")
X STROKE
510(20.1")
Ø40 15.7")
(Ø

5227.6 (205.8")
0

(12")
305

800 (31.5")
(8.1")
1249.1 (49.2")

205

300
(11.8")
(7.4")
187

Z STROKE
510 100
(20.1") (3.9")
640 275
(1.1")
28.4

(25.2") 610 (24") (10.8") AIR

1525 (60") 1480 (58.3")
LOADING STATION 744.7 260 208
1823.9 (71.8") (29.3") 3005 (118.3") (10.2") (8.2")

6041.6 (237.9")

Specifications subject to change without notice.

MYCENTER-SuperCell 400
39
 US CORPORATE
Kitamura GmbH HEADQUARTERS
Düsseldorf, Wheeling, IL
HEADQUARTERS
Germany
Takaoka City,
Toyama Pref.,
Japan

Kitamura Machinery Co., Ltd. (Headquarters) Kitamura Machinery of U.S.A., Inc. (Chicago) Kitamura Machinery GmbH (Düsseldorf)
1870-Toide, Takaoka-City, Toyama Pref., Japan 78 East Century Drive, Wheeling, Illinois 60090 U.S.A. Wahlerstrasse 39, 40472 Düsseldorf, Germany
TEL: (0766) 63-1100 FAX: (0766) 63-1128 TEL: (847) 520-7755 FAX: (847) 520-7763 TEL: (0211) 65-6077 FAX: (0211) 904-7916
www.kitamura-machinery.co.jp www.kitamura-machinery.com www.kitamura-machinery.eu
E-mail: [email protected] E-mail: [email protected] Email: [email protected]

PRINTED IN USA 12/16 REV 1 3M