ALMANSOORI INSPECTION SERVICES

RIG EQUIPMENT INSPECTION REPORT

CUSTOMER Advance Energy Systems REPORT NO. 5010051899-MT-001 DATE 01-Mar-2022 PAGE 1

LOCATION ADES-158 WORK ORDER NO./PURCHASE ORDER NO 5010051899

INSPECTION CATEGORY ACCEPTANCE API RP 7L/ OEM/CLIENT PN 70370-D -
INSPECTION STANDARD ASTM E 709/API RP 7L OEM PROC. NO.
Cat.lll Cat.lV X Client NA STANDARD Revision: 10

TYPE OF INSPECTION X MAGNETIC PARTICLE INSPECTION X DIMENSIONAL INSPECTION X VISUAL INSPECTION

DESCRIPTION OF ITEM BV-100 Manual Tong Assembly IDENTIFICATION NUMBER Asset No: 266046

MEASURED ACCEPT.LIMIT
PART / SECTION RESULT/ COMMENT
VALUE MIN/MAX
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PLAY BETWEEN LEVER & JAW (B) N/A MAX 1.12 mm N/A

Manufacturer: B+V(Forum) Size & Model : BV-100 Capacity: N/A INSPECTION RESULT/ COMMENTS

Photo of item section with ID No. Manual tong rejected, Field welding found on the Jaw parts and Found parts from

other OEMs (NOV & Rutong)

INSPECTED AREA HIGHLIGHTED AS; Full Body
EQUIPMENT & TECHNICAL DETAILS PERSONNEL DETAILS
WHITE MAG.PARTICLE INSPECTOR
MOHAMED YASIR
EQUIPMENT AC YOKE CONT.MODEL MR72 MODEL # MR76S NAME: CUSTOMER NAME:
W.CONTRAST MAG.PARTICLE
MODEL Ferrous Probe 72/2103 768/3102 QUALIFICATION: NDT LEVEL II SIGN:
BATCH # BATCH #

SER.NO. ACY-050 CALIPER SER.NO. VCG-1043 SIGNATURE & DATE:

INSPECTION TECHNIQUE Wet Visible Magnetic Particles Inspection STAMP
Abbreviations: SER.No= Serial Number,CONT= Contrast,MAG.PARTICLE= Magnetic Particle,W.CONTRAST= White Contrast
P.O. Box 109442 - Abu Dhabi - U.A.E. - Tel: +971-2-5543602 |Fax: +971-2-5543718 | E- Mail: [email protected]

F.1461
Rev.0
05.06.2017
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION CHECKLIST
EQUIPMENT NAME Manual Tong

CUSTOMER : ADES REPORT REF NO : 5010051899-MT-001

LOCATION : ADES-158 DATE : 01-Mar-2022

EQUIPMENT MODEL , CAPACITY & SIZE : BV-100 Manual Tong Assembly-B+V

IDENTIFICATION NO. : Asset No: 266046

COMPLIANCE TO THE
SR# INSPECTION CHECK POINTS STANDARDS/PROCEDURE VALUES / DESCRIPTION
YES NO N/A OBS

Documentation Review

1 Do we have access to review Documentation delivered by the OEM? YES

2 Do we have OEM Manual to locate Wear data dimensional tolerance? YES

3 Do we have a Critical area diagram or instructions to locate critical areas? YES

4 Do we have OEM Manual to locate to General visual inspection requirements ? YES

Activity Records (Previous inspection records)

1 Have you verified the Records of previous CAT III and CAT IV inspection? YES

2 Have you checked for significant defects recorded in the drawing or the previous inspection? YES

3 Have you checked for any actions recommended in the previous report? YES

4 Have you checked the location and extent of the repairs given in the previous report? YES

5 Have you checked for NDT inspection performed and the results of the inspection? YES

6 Have you checked for the records if there is any Primary load-carrying components replaced or manufactured? YES

General Visual Inspection

1 Have you identified the Identification number and OEM Identification on the equipment? YES

2 Have you identified the Size, Capacity & Model using COC or marking on the Equipment? YES

3 Have you identified the category of inspection to be carried out based on previous inspection? YES

4 Have you checked the Adequate dismantling to access all critical areas for CAT III as per OEM Manual? YES

5 Have you checked the Adequate dismantling to access all critical areas for CAT IV as per OEM Manual? YES

6 Have you checked for any Visual Cracks, loose fits or connections & elongation? YES

7 Have you checked for any Signs of wear, corrosion, over loading & evidence of unauthorized field welding? YES

8 Have you checked for any Potential dropped objects or damaged missing retention devices? YES

9 Have you checked for the Missing components, deterioration & Lubrication? YES

Magnetic Particle Inspection

1 Have you verified the surface to confirm adequate paint and foreign material removal? YES

2 Have you taken the photo as evidence of proper surface preparation? YES

Dimensional inspection

MIN MAX Measured Dimensions

1 PIN CLEARANCE (A) MAX 1.14 mm N/A

2 PIN CLEARANCE (A) MAX 1.14 mm N/A

3 PIN CLEARANCE (A) MAX 1.14 mm N/A

4 PIN CLEARANCE (A) MAX 1.14 mm N/A

5 PIN CLEARANCE (A) MAX 1.14 mm N/A

6 PLAY BETWEEN LEVER & JAW (B) MAX 1.12 mm N/A

Others ( Specify the method)

1 Did you notify the customer when the equipment rejected? YES

2 Have you received the client acknowledgement particularly for the rejected equipment? YES

COMMENTS :

Manual tong rejected, Field welding found on the Jaw parts and Found parts from other OEMs (NOV & Rutong)
NEAR MISS OBSERVATION ,IF ANY:

INSPECTOR NAME & SIGNATURE DATE: 01-Mar-2022

Mohamed Yasir
F.1620
AlMansoori Inspection Services ,P.O.Box: 3599 ,Al Khobar 31952 ,KSA, Email:[email protected], Web: www.almansoori.biz Rev.0
28.05.2020
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION REPORT

CUSTOMER Advance Energy Systems REPORT NO. 5010051899-MT-002 DATE 01-Mar-2022 PAGE 1

LOCATION ADES-158 WORK ORDER NO./PURCHASE ORDER NO 5010051899

INSPECTION CATEGORY ACCEPTANCE API RP 7L/ OEM/CLIENT PN 70370-D -
INSPECTION STANDARD ASTM E 709/API RP 7L OEM PROC. NO.
Cat.lll Cat.lV X Client NA STANDARD Revision: 10

TYPE OF INSPECTION X MAGNETIC PARTICLE INSPECTION X DIMENSIONAL INSPECTION X VISUAL INSPECTION

DESCRIPTION OF ITEM BV-100 Manual Tong Assembly IDENTIFICATION NUMBER Asset No: 266045

MEASURED ACCEPT.LIMIT
PART / SECTION RESULT/ COMMENT
VALUE MIN/MAX
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PLAY BETWEEN LEVER & JAW (B) N/A MAX 1.12 mm N/A

Manufacturer: B+V(Forum) Size & Model : BV-100 Capacity: N/A INSPECTION RESULT/ COMMENTS

Photo of item section with ID No. Manual tong rejected, Field welding found on the Jaw parts and Found parts from

other OEMs (NOV & Rutong)

INSPECTED AREA HIGHLIGHTED AS; Full Body
EQUIPMENT & TECHNICAL DETAILS PERSONNEL DETAILS
WHITE MAG.PARTICLE INSPECTOR
MOHAMED YASIR
EQUIPMENT AC YOKE CONT.MODEL MR72 MODEL # MR76S NAME: CUSTOMER NAME:
W.CONTRAST MAG.PARTICLE
MODEL Ferrous Probe 72/2103 768/3102 QUALIFICATION: NDT LEVEL II SIGN:
BATCH # BATCH #

SER.NO. ACY-050 CALIPER SER.NO. VCG-1043 SIGNATURE & DATE:

INSPECTION TECHNIQUE Wet Visible Magnetic Particles Inspection STAMP
Abbreviations: SER.No= Serial Number,CONT= Contrast,MAG.PARTICLE= Magnetic Particle,W.CONTRAST= White Contrast
P.O. Box 109442 - Abu Dhabi - U.A.E. - Tel: +971-2-5543602 |Fax: +971-2-5543718 | E- Mail: [email protected]

F.1461
Rev.0
05.06.2017
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION CHECKLIST
EQUIPMENT NAME Manual Tong

CUSTOMER : ADES REPORT REF NO : 5010051899-MT-002

LOCATION : ADES-158 DATE : 01-Mar-2022

EQUIPMENT MODEL , CAPACITY & SIZE : BV-100 Manual Tong Assembly-B+V

IDENTIFICATION NO. : Asset No: 266045

COMPLIANCE TO THE
SR# INSPECTION CHECK POINTS STANDARDS/PROCEDURE VALUES / DESCRIPTION
YES NO N/A OBS

Documentation Review

1 Do we have access to review Documentation delivered by the OEM? YES

2 Do we have OEM Manual to locate Wear data dimensional tolerance? YES

3 Do we have a Critical area diagram or instructions to locate critical areas? YES

4 Do we have OEM Manual to locate to General visual inspection requirements ? YES

Activity Records (Previous inspection records)

1 Have you verified the Records of previous CAT III and CAT IV inspection? YES

2 Have you checked for significant defects recorded in the drawing or the previous inspection? YES

3 Have you checked for any actions recommended in the previous report? YES

4 Have you checked the location and extent of the repairs given in the previous report? YES

5 Have you checked for NDT inspection performed and the results of the inspection? YES

6 Have you checked for the records if there is any Primary load-carrying components replaced or manufactured? YES

General Visual Inspection

1 Have you identified the Identification number and OEM Identification on the equipment? YES

2 Have you identified the Size, Capacity & Model using COC or marking on the Equipment? YES

3 Have you identified the category of inspection to be carried out based on previous inspection? YES

4 Have you checked the Adequate dismantling to access all critical areas for CAT III as per OEM Manual? YES

5 Have you checked the Adequate dismantling to access all critical areas for CAT IV as per OEM Manual? YES

6 Have you checked for any Visual Cracks, loose fits or connections & elongation? YES

7 Have you checked for any Signs of wear, corrosion, over loading & evidence of unauthorized field welding? YES

8 Have you checked for any Potential dropped objects or damaged missing retention devices? YES

9 Have you checked for the Missing components, deterioration & Lubrication? YES

Magnetic Particle Inspection

1 Have you verified the surface to confirm adequate paint and foreign material removal? YES

2 Have you taken the photo as evidence of proper surface preparation? YES

Dimensional inspection

MIN MAX Measured Dimensions

1 PIN CLEARANCE (A) MAX 1.14 mm N/A

2 PIN CLEARANCE (A) MAX 1.14 mm N/A

3 PIN CLEARANCE (A) MAX 1.14 mm N/A

4 PIN CLEARANCE (A) MAX 1.14 mm N/A

5 PIN CLEARANCE (A) MAX 1.14 mm N/A

6 PLAY BETWEEN LEVER & JAW (B) MAX 1.12 mm N/A

Others ( Specify the method)

1 Did you notify the customer when the equipment rejected? YES

2 Have you received the client acknowledgement particularly for the rejected equipment? YES

COMMENTS :

Manual tong rejected, Field welding found on the Jaw parts and Found parts from other OEMs (NOV & Rutong)
NEAR MISS OBSERVATION ,IF ANY:

INSPECTOR NAME & SIGNATURE DATE: 01-Mar-2022

Mohamed Yasir
F.1620
AlMansoori Inspection Services ,P.O.Box: 3599 ,Al Khobar 31952 ,KSA, Email:[email protected], Web: www.almansoori.biz Rev.0
28.05.2020
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION REPORT

CUSTOMER Advance Energy Systems REPORT NO. 5010051899-MT-003 DATE 01-Mar-2022 PAGE 1

LOCATION ADES-158 WORK ORDER NO./PURCHASE ORDER NO 5010051899

INSPECTION CATEGORY ACCEPTANCE API RP 7L/ OEM/CLIENT PN 70370-D -
INSPECTION STANDARD ASTM E 709/API RP 7L OEM PROC. NO.
Cat.lll Cat.lV X Client NA STANDARD Revision: 10

TYPE OF INSPECTION X MAGNETIC PARTICLE INSPECTION X DIMENSIONAL INSPECTION X VISUAL INSPECTION

DESCRIPTION OF ITEM BV-100 Manual Tong Assembly IDENTIFICATION NUMBER Asset No: 282638

MEASURED ACCEPT.LIMIT
PART / SECTION RESULT/ COMMENT
VALUE MIN/MAX
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PLAY BETWEEN LEVER & JAW (B) N/A MAX 1.12 mm N/A

Manufacturer: B+V(Forum) Size & Model : BV-100 Capacity: N/A INSPECTION RESULT/ COMMENTS

Photo of item section with ID No. Manual tong rejected, Field welding found on the Jaw parts and Found parts from

other OEMs (NOV)

INSPECTED AREA HIGHLIGHTED AS; Full Body
EQUIPMENT & TECHNICAL DETAILS PERSONNEL DETAILS
WHITE MAG.PARTICLE INSPECTOR
MOHAMED YASIR
EQUIPMENT AC YOKE CONT.MODEL MR72 MODEL # MR76S NAME: CUSTOMER NAME:
W.CONTRAST MAG.PARTICLE
MODEL Ferrous Probe 72/2103 768/3102 QUALIFICATION: NDT LEVEL II SIGN:
BATCH # BATCH #

SER.NO. ACY-050 CALIPER SER.NO. VCG-1043 SIGNATURE & DATE:

INSPECTION TECHNIQUE Wet Visible Magnetic Particles Inspection STAMP
Abbreviations: SER.No= Serial Number,CONT= Contrast,MAG.PARTICLE= Magnetic Particle,W.CONTRAST= White Contrast
P.O. Box 109442 - Abu Dhabi - U.A.E. - Tel: +971-2-5543602 |Fax: +971-2-5543718 | E- Mail: [email protected]

F.1461
Rev.0
05.06.2017
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION CHECKLIST
EQUIPMENT NAME Manual Tong

CUSTOMER : ADES REPORT REF NO : 5010051899-MT-003

LOCATION : ADES-158 DATE : 03-Mar-2022

EQUIPMENT MODEL , CAPACITY & SIZE : BV-100 Manual Tong Assembly-B+V

IDENTIFICATION NO. : Asset No: 282638

COMPLIANCE TO THE
SR# INSPECTION CHECK POINTS STANDARDS/PROCEDURE VALUES / DESCRIPTION
YES NO N/A OBS

Documentation Review

1 Do we have access to review Documentation delivered by the OEM? YES

2 Do we have OEM Manual to locate Wear data dimensional tolerance? YES

3 Do we have a Critical area diagram or instructions to locate critical areas? YES

4 Do we have OEM Manual to locate to General visual inspection requirements ? YES

Activity Records (Previous inspection records)

1 Have you verified the Records of previous CAT III and CAT IV inspection? YES

2 Have you checked for significant defects recorded in the drawing or the previous inspection? YES

3 Have you checked for any actions recommended in the previous report? YES

4 Have you checked the location and extent of the repairs given in the previous report? YES

5 Have you checked for NDT inspection performed and the results of the inspection? YES

6 Have you checked for the records if there is any Primary load-carrying components replaced or manufactured? YES

General Visual Inspection

1 Have you identified the Identification number and OEM Identification on the equipment? YES

2 Have you identified the Size, Capacity & Model using COC or marking on the Equipment? YES

3 Have you identified the category of inspection to be carried out based on previous inspection? YES

4 Have you checked the Adequate dismantling to access all critical areas for CAT III as per OEM Manual? YES

5 Have you checked the Adequate dismantling to access all critical areas for CAT IV as per OEM Manual? YES

6 Have you checked for any Visual Cracks, loose fits or connections & elongation? YES

7 Have you checked for any Signs of wear, corrosion, over loading & evidence of unauthorized field welding? YES

8 Have you checked for any Potential dropped objects or damaged missing retention devices? YES

9 Have you checked for the Missing components, deterioration & Lubrication? YES

Magnetic Particle Inspection

1 Have you verified the surface to confirm adequate paint and foreign material removal? YES

2 Have you taken the photo as evidence of proper surface preparation? YES

Dimensional inspection

MIN MAX Measured Dimensions

1 PIN CLEARANCE (A) MAX 1.14 mm N/A

2 PIN CLEARANCE (A) MAX 1.14 mm N/A

3 PIN CLEARANCE (A) MAX 1.14 mm N/A

4 PIN CLEARANCE (A) MAX 1.14 mm N/A

5 PIN CLEARANCE (A) MAX 1.14 mm N/A

6 PLAY BETWEEN LEVER & JAW (B) MAX 1.12 mm N/A

Others ( Specify the method)

1 Did you notify the customer when the equipment rejected? YES

2 Have you received the client acknowledgement particularly for the rejected equipment? YES

COMMENTS :

Manual tong rejected, Field welding found on the Jaw parts and Found parts from other OEMs (NOV)
NEAR MISS OBSERVATION ,IF ANY:

INSPECTOR NAME & SIGNATURE DATE: 03-Mar-2022

Mohamed Yasir
F.1620
AlMansoori Inspection Services ,P.O.Box: 3599 ,Al Khobar 31952 ,KSA, Email:[email protected], Web: www.almansoori.biz Rev.0
28.05.2020
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION REPORT

CUSTOMER Advance Energy Systems REPORT NO. 5010051899-MT-004 DATE 01-Mar-2022 PAGE 1

LOCATION ADES-158 WORK ORDER NO./PURCHASE ORDER NO 5010051899

INSPECTION CATEGORY ACCEPTANCE API RP 7L/ OEM/CLIENT PN 70370-D -
INSPECTION STANDARD ASTM E 709/API RP 7L OEM PROC. NO.
Cat.lll Cat.lV X Client NA STANDARD Revision: 10

TYPE OF INSPECTION X MAGNETIC PARTICLE INSPECTION X DIMENSIONAL INSPECTION X VISUAL INSPECTION

DESCRIPTION OF ITEM BV-100 Manual Tong Assembly IDENTIFICATION NUMBER Asset No: 167007

MEASURED ACCEPT.LIMIT
PART / SECTION RESULT/ COMMENT
VALUE MIN/MAX
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PIN CLEARANCE (A) N/A MAX 1.14 mm N/A
PLAY BETWEEN LEVER & JAW (B) N/A MAX 1.12 mm N/A

Manufacturer: B+V(Forum) Size & Model : BV-100 Capacity: N/A INSPECTION RESULT/ COMMENTS

Photo of item section with ID No.

Manual tong rejected, Found parts from other OEMs (NOV)
INSPECTED AREA HIGHLIGHTED AS; Full Body
EQUIPMENT & TECHNICAL DETAILS PERSONNEL DETAILS
WHITE MAG.PARTICLE INSPECTOR
MOHAMED YASIR
EQUIPMENT AC YOKE CONT.MODEL MR72 MODEL # MR76S NAME: CUSTOMER NAME:
W.CONTRAST MAG.PARTICLE
MODEL Ferrous Probe 72/2103 768/3102 QUALIFICATION: NDT LEVEL II SIGN:
BATCH # BATCH #

SER.NO. ACY-050 CALIPER SER.NO. VCG-1043 SIGNATURE & DATE:

INSPECTION TECHNIQUE Wet Visible Magnetic Particles Inspection STAMP
Abbreviations: SER.No= Serial Number,CONT= Contrast,MAG.PARTICLE= Magnetic Particle,W.CONTRAST= White Contrast
P.O. Box 109442 - Abu Dhabi - U.A.E. - Tel: +971-2-5543602 |Fax: +971-2-5543718 | E- Mail: [email protected]

F.1461
Rev.0
05.06.2017
 ALMANSOORI INSPECTION SERVICES
RIG EQUIPMENT INSPECTION CHECKLIST
EQUIPMENT NAME Manual Tong

CUSTOMER : ADES REPORT REF NO : 5010051899-MT-004

LOCATION : ADES-158 DATE : 03-Mar-2022

EQUIPMENT MODEL , CAPACITY & SIZE : BV-100 Manual Tong Assembly-B+V

IDENTIFICATION NO. : Asset No: 167007

COMPLIANCE TO THE
SR# INSPECTION CHECK POINTS STANDARDS/PROCEDURE VALUES / DESCRIPTION
YES NO N/A OBS

Documentation Review

1 Do we have access to review Documentation delivered by the OEM? YES

2 Do we have OEM Manual to locate Wear data dimensional tolerance? YES

3 Do we have a Critical area diagram or instructions to locate critical areas? YES

4 Do we have OEM Manual to locate to General visual inspection requirements ? YES

Activity Records (Previous inspection records)

1 Have you verified the Records of previous CAT III and CAT IV inspection? YES

2 Have you checked for significant defects recorded in the drawing or the previous inspection? YES

3 Have you checked for any actions recommended in the previous report? YES

4 Have you checked the location and extent of the repairs given in the previous report? YES

5 Have you checked for NDT inspection performed and the results of the inspection? YES

6 Have you checked for the records if there is any Primary load-carrying components replaced or manufactured? YES

General Visual Inspection

1 Have you identified the Identification number and OEM Identification on the equipment? YES

2 Have you identified the Size, Capacity & Model using COC or marking on the Equipment? YES

3 Have you identified the category of inspection to be carried out based on previous inspection? YES

4 Have you checked the Adequate dismantling to access all critical areas for CAT III as per OEM Manual? YES

5 Have you checked the Adequate dismantling to access all critical areas for CAT IV as per OEM Manual? YES

6 Have you checked for any Visual Cracks, loose fits or connections & elongation? YES

7 Have you checked for any Signs of wear, corrosion, over loading & evidence of unauthorized field welding? YES

8 Have you checked for any Potential dropped objects or damaged missing retention devices? YES

9 Have you checked for the Missing components, deterioration & Lubrication? YES

Magnetic Particle Inspection

1 Have you verified the surface to confirm adequate paint and foreign material removal? YES

2 Have you taken the photo as evidence of proper surface preparation? YES

Dimensional inspection

MIN MAX Measured Dimensions

1 PIN CLEARANCE (A) MAX 1.14 mm N/A

2 PIN CLEARANCE (A) MAX 1.14 mm N/A

3 PIN CLEARANCE (A) MAX 1.14 mm N/A

4 PIN CLEARANCE (A) MAX 1.14 mm N/A

5 PIN CLEARANCE (A) MAX 1.14 mm N/A

6 PLAY BETWEEN LEVER & JAW (B) MAX 1.12 mm N/A

Others ( Specify the method)

1 Did you notify the customer when the equipment rejected? YES

2 Have you received the client acknowledgement particularly for the rejected equipment? YES

COMMENTS :

Manual tong rejected, Found parts from other OEMs (NOV)

NEAR MISS OBSERVATION ,IF ANY:

INSPECTOR NAME & SIGNATURE DATE: 03-Mar-2022

Mohamed Yasir
F.1620
AlMansoori Inspection Services ,P.O.Box: 3599 ,Al Khobar 31952 ,KSA, Email:[email protected], Web: www.almansoori.biz Rev.0
28.05.2020