Electrically Actuated Ball Valve
Type 127
General Sample Speciation
• Size: ⅜”-2” The Type 127 Ball Valve shall be used in open/close applica-
• Material: PVC, CPVC, ABS tions. The actuator shall be a Type EA15 with integrated adjust-
• Seat: PTFE able heating element and open/close position feedback via two
• Seals: EPDM or FPM bistable relays. The ball valve shall be true union and utilize a
• End Connection: Solvent cement socket, threaded, flanged floating ball design. A 7-segment display shall communicate
• Actuator Housing: Glass-filled PP specific fault status. The ball shall be fully molded and full port
• Voltage: 100-230VAC with two way blocking capability. The stem shall be blowout
• Protection Class: IP67 proof, utilizing a double o-ring seal and a predetermined break
• Mounting: Stainless steel threaded inserts point opposite the media side of the stem seals. The seat carrier
• Manual Override: Integrated shall be adjustable and reverse threaded. The valve nut threads
• Position Feedback: Open/close, bistable relay shall be of buttress type. Ball seats shall have an elastomeric
• Optical Position Indicator: Integrated, LED enforced backing o-ring and all elastomeric seals shall be of like mate-
rial. ANSI flanged versions shall meet ANSI B16.5 150lb stan-
Key Valve Certifications dards. All valves shall be tested in accordance to ISO9393 and
• NSF 61: PVC and CPVC designed to ISO16135 standards. All valves shall be manufac-
• FDA CFR 21 177.2600: EPDM and FPM tured under ISO9001 for Quality and ISO14001 for Environmental
• FDA CFR 21 177.1550: PTFE Management. Following assembly, every valve shall be tested
• ABS: All materials and certified bubble tight exceeding Class VI standards.
• USP Class VI (physiological non-toxic): EPDM, FPM, PTFE,
PP and PVDF
89
Material Specification Components
PVC valves shall meet ASTM D1784 cell classification 12454
standards. CPVC valves shall meet ASTM D1784 cell classifi-
cation 23447-B standards. ABS valves shall meet ASTM D3965
cell classification 42222 standards. Valves of all materials
EA15 Electric Actuator
shall be RoHS compliant.
Optional Features
• Fail Safe Return: Battery back-up, internal or external
• Manual Loading Station: Local control box
• Vented Ball: For sodium hypochlorite use Intermediate Kit
• Voltage: 24VAC/DC
Multifunction Module
Key Actuator Certifications
• CE 2006/42/EC, Annex II B: EA15
Type 546 Ball Valve
• CE 2004/108/CE: EA15
• CE 2006/95/CE: EA15
• UL 61010-1: EA15
• CSA C22.2 N0. 61010-1: EA15
Actuator Technical Data
EA 15
Cycle Time 5s/90°
Cycles at 70°F 150,000
Housing Material Glass-filled PP
Position Indicator Optical, integrated LED for visual communication of position and actuator status
Emergency Manual Override Integrated
Rated Voltage 100–230VAC, 50/60 Hz
Rated Voltage Tolerance +/- 15%
Nominal Output 35VA
Calculated Current Draw 0.3A @ 100VAC
0.13A @ 230VAC
Duty Cycle 40%
Position Feedback Bi-stable, 250V, 2A
Protection Class IP67 per EN 60529 UL/CSA
NEMA 4X
Overload Protection Resetting (1)
Overvoltage Category Category II according to DIN EN 61010-1
Power Connection Connector plug 3 P+ E per DIN EN 175301-03
Pollution Grade Grade 2 according to DIN EN 61010-1
Maximum Elevation 6561 feet
Ambient Temperature 14°F to 122°F (2)
Allowable Humidity 90% relative humidity, non condensing
(1) Overload protection of the motor is dimensioned so that the motor and the power supply board are protected. As soon as the load is within the torque range, the
actuator will begin operating again.
(2) At temperatures below 14°F and if there is condensation, the heating element should be activated.
90
Technical Data
Pressure Temperature Curves
The following graphs are based on a 25 year lifetime water or similar media application
PVC CPVC
165 165
150 150
135 135
120 120
105 105
Pressure (psi)
Pressure (psi)
90 90
75 75
60 60
45 45
30 30
15 15
0 0
20 40 60 80 100 120 140 160 20 40 60 80 100 120 140 160 180
Temperature (°F) Temperature (°F)
ABS Pressure-Temperature
165
Material Temperature Range (ºF) Max Pressure (psi)
150
PVC 32 to 140 150
135
CPVC 32 to 176 150
120
ABS -40 to 140 150
105
Pressure (psi)
90 Vacuum Service
75 The Type 127 is rated for full vacuum service. Maximum
60 differential pressure of 15psi at 122ºF.
45
30
15 Wiring
0
-60 -40 -20 0 20 40 60 80 100 120 140 160 Control
Temperature (°F)
Flow
The following information is based on water applications at 68º F
Cv Value
Size (inch) d (mm) Cv (gal/min)
Feedback
⅜ 16 5
½ 20 13
¾ 25 25
1 32 49
1¼ 40 70
1½ 50 112
2 63 217
91
Dimensions
The following tables are shown in millimeters unless otherwise specified
All Materials
Size (inch) d (mm) D H H1 H2 L4 M
⅜ 16 50 201 27 12 25 M6
½ 20 50 201 27 12 25 M6
¾ 25 58 210 30 12 25 M6
1 32 68 210 36 12 25 M6
1¼ 40 84 221 44 16 45 M8
1½ 50 97 221 51 16 45 M8
2 63 124 243 64 16 45 M8
PVC/CPVC ABS
IPS Socket Threaded NPT ANSI Flanged Metric Socket
Size
(inch) L z L z L D1 (inch) D4 (inch) D5 (inch) R (inch) d (mm) L z
⅜ 105 67 98 69 - - - - - 16 92 64
½ 105 61 98 65 149 3.5 2.38 0.63 0.57 20 95 64
¾ 121 70 111 74 165 3.88 2.75 0.63 0.58 25 110 72
1 133 76 127 82 184 4.25 3.13 0.63 0.66 32 123 79
1¼ 154 90 147 98 206 4.63 3.5 0.63 0.69 40 146 94
1½ 164 94 157 110 221 5 3.88 0.63 0.76 50 157 95
2 183 107 183 135 251 6 4.75 0.75 0.82 63 183 107
92
