Scribd
Upload
132 views

Command File Ericsson

This document contains a list of commands for checking alarms, frequencies, sites, traffic, and performing resets for 2G and 4G networks. It includes commands for checking cell status, frequencies, sites, alarms, traffic, hopping status, channel configuration, faults, sectors, TGs, TRXs, timeslots, TEI values, and resetting TGs and TRXs. It also includes commands for checking E1 status, errors, and resetting error counters. For 4G it includes commands for resetting RRUs, checking TRXs, RRU serial numbers, sync status, RRU types, RILINKs, clocks, BTS types, and alarm histories. It also lists commands for G+

Uploaded by

Rafi Sheikh
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
132 views

Command File Ericsson

This document contains a list of commands for checking alarms, frequencies, sites, traffic, and performing resets for 2G and 4G networks. It includes commands for checking cell status, frequencies, sites, alarms, traffic, hopping status, channel configuration, faults, sectors, TGs, TRXs, timeslots, TEI values, and resetting TGs and TRXs. It also includes commands for checking E1 status, errors, and resetting error counters. For 4G it includes commands for resetting RRUs, checking TRXs, RRU serial numbers, sync status, RRU types, RILINKs, clocks, BTS types, and alarm histories. It also lists commands for G+

Uploaded by

Rafi Sheikh
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

get .

fingerprint 2G
Alarm command list

A-allip:acl=a1;For site down and critical alarm

B-allip:acl=a2;For major alarm

C-allip:acl=a3;For minor alarm

2-To check BCCH frequency=rldep:cell=cellname;

3-To get the list of all the sites in the BSC=rldep:cell=all;

4-To check the frequency of a site=rlcfp:cell=cellname;

5-To check hopping status=rlchp:cell=cellname;

6-To check the traffic

n(get TG value)
rxmsp:mo=rxocf-122,subord;

7-Signalling and status of channel configration=rlcrp:cell=cellname;

8-To lock the site=


rxbli:mo=rxocf-TG/CF No.,subord,force;

9-To unlock the site=rxble:mo=rxocf-TG/CF No.,subord;

10-To lock the TRX=rxbli:mo=rxotrx-TG/CF No.-TRX no.,subord,force;

11-To unlock the trx=rxble:mo=rxotrx-TG/CF No.-trx no.,subord;

12-To lock the time slot=rxbli:mo=rxotrx-TG/CF No.-TRX no-Ts no,subord,force;

13-To unlock the time slot=


rxble:mo=rxotrx-TG/CF No.-TRX no-Ts no,subord;

14-Alarm in TG=RXASP:MO=RXOTG-TG N0;

15-Check site status=RXCDP:MO=RXOTG-TG N0;

16-Find the TRX in which sector=rxmop:mo=rxotrx-12-1;

17-External alarm in BTS=allip:alcat=BTS;

18-Fault code in CF=rxmfp:mo=rxotg-TG NO;

19-Fault code in TRX=rxmfp:mo=rxotrx-12-3;

20-How to find sector=rxtcp:mo=rxotg-TG No;

21-How to find TG value=rxtcp:moty=rxotg,cell=cellname;

22-Check Traffic=rlcrp:cell=cellname;

23-To check TEI Value=rxmop:mo=rxocf-TG NO;


24-To check internal alarm in BSC=rxasp:moty=rxotg;

25-How to find sector restore time=rxelp:mo=rxotg-TG NO;

26-Reset TG=rxbu:mo=rxotg-528,subord,force;
rxese:mo=rxotg-24,subord;
rxesi:mo=rxotg-24,subord;
rxble:mo=rxotg-24,subord;

27-To reset Trx=rxbu:mo=rxotrx-119-5,subord,force;


rxese:mo=rxotrx-241-5,subord;
rxesi:mo=rxotrx-241-5,subord;
rxble:mo=rxotrx-241-5,subord;

28-To check E1 status=dtstp:dip=dip no;

29-To check error in E1=dtqup:dip=dip no;

30-Reset error counter=dtqsr:dip=dip no,unacc,degr;

31-E1 block and unblock=dtble:dip=dip no;


dtbli:dip=dip no;

32-How many E1 at site-rxapp:mo=rxotg-tg no;

33-To check site type-rrscp:scgr=TG NO;


To get PSTU NO-rrsgp:scgr=TG NO;
rrptp:pstu=PSTU NO;

34-To login TCU-ssh admin@tcu oam IP

35-To check Media status in TCU-getmoattribute

36-To check media status in TCU-getneighbors

37-2G site alarm log-aploc;


alogfind -a 0100 -b 0130 -s "GIGWTGGWORI" -e 20220213 -g 20220213

38. rxmsp:mo=rxotg-35,subord; 142393

n
4G Site command list

RRU reset: st rru


Block- bl 108(proxy number)
y
deblock-deb 108
y

To get IP of O&M and UP : get address address


1-To reset RRU-accn 1846 restartunit 2 2 2

2-To check Trx in G+L site-hget trx abistss

3-To check RRU Serial no-hget rru prod

4-To check sync status-st sync


5-To check RRU type -lhlist

6-To check RILINK-st rilink

7-To checl clock-get . clock

8-To check 4G BTS Type-gwt 0

9-To check sync staus for DUS-st sync

10-To check alarm history=lga -m 1d

11-To check all CV=cvls

G+L site command


list

1-To get TG no for G+L site in 2G-rxtcp:moty=rxstg,cell=cellname;(get TG value)

2-To check cell status=rxmsp:mo=rxstg-TG NO,subord;

3-To check 2G media status=st abisip

4-To check TRX status-st trx

You might also like