Double Acting Cylinders

HD Series - General Purpose

Capacity:
10 - 500 Tons

Stroke:
5.90 - 24.00 Inches

Pressure:
10,000 psi

Min. - Max. Height:

10.56 - 60.13 Inches

HD20013 HD3008

• Rod wiper seals out dirt and contamination

• High strength steel construction from gun
drilled solid bar
• High flow 3/8″ NPTF female couplers
• One piece high grade alloy bearing for side load protec-
tion and long life
• Ideal for pushing and pulling
• Maximum working pressure: 10,000 psi / 700 bar
• Threaded cylinders, removable saddle, thicker cylinder
walls
• Retract under hydraulic power for faster operation

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Clevis and Tangs

Install a clevis or a tang
to your double acting
cylinder for a pulling
pg 34
application.

HD cylinders can be
used in pushing and
pulling applications.
In this photo, we
see a HD2506 HD
cylinder set up for
a pull application
using a Rod Clevis
cylinder accessory

1-888-332-6419
www.BVAhydraulics.com
 HD Series

Cylinders
Relief Valve Related Product: Gauges
All double acting cylinders are equipped with a Reduce the risk of overloading
pressure relief valve located
your product by using a gauge.
next to the retract port.
A variety of graduations and
60.13” These pressure relief valves
types to suit any need.
help prevent cylinder over
pressurization on the return pg 69
port side of the cylinder.

Cylinder Accessories
See the assortment
of accessories designed
to work with our products.
pg 34

Combo Kits
With a variety of tonnage Most cylinders are available
and sizes, you can apply our in easy to order kits: Cylinder,
cylinders to a large variety Gauge, Couplers, Hose
10.56” of applications. Custom and Pump. pg 64

tonnages and stroke lengths

are available upon request.

HD20024 HD2506 Safety Instructions

Visit our DO’S and DON’TS
Quick Selection Guide section to review the best
methods of operation.
pg 92
Always be prepared.

Oil Capacity
Cylinder Collapsed
Stroke Model Weight
Capacity Height High-Flow Couplers
(in) Number Push Pull (lbs)
(tons) (in) High-Flow Coupler: CH38F is
(in3) (in3) included on all models (except
where specified).
10.04 HD1010 16.12 22.41 7.47 26.7
10
11.97 HD1012 18.03 26.71 8.90 30.0
25 5.90 HD2506 10.56 30.35 15.81 24.8 HUD Series – Aluminum Cylinders
8.15 HD3008 15.31 52.93 26.02 43.0 Aluminum cylinders make a
30 great lightweight alternative
14.49 HD3014 21.65 94.09 46.26 60.6 being up to 60% lighter
6.18 HD5506‡ 13.03 67.93 19.74 70.5 than comparable
steel models. pg 16

55 13.19 HD5513‡ 20.04 144.94 42.11 104.0

20.12 HD5520‡ 28.86 221.09 64.24 146.2
6.10 HD7506 ‡
13.70 98.10 31.21 93.7
75
13.11 HD7513‡ 20.71 210.93 67.06 136.8
6.57 HD10006‡ 14.06 135.23 62.98 138.6
10.13 HD10010‡ 17.67 208.30 97.10 169.2
100
13.11 HD10013 ‡
20.63 269.66 125.58 193.6
18.15 HD10018‡ 27.05 373.31 173.86 248.3
6.00 HD20006 16.94 265.28 135.00 325.0
200 13.00 HD20013 23.94 574.78 293.00 440.0
24.02 HD20024 36.13 1061.00 528.00 616.0
300 6.00 HD30006 19.13 425.56 228.00 441.0

500 6.00 HD50006 22.75 678.92 378.00 953.0

See pages (pg.14-15) for detailed specifications.

Double Acting Cylinders
HD Series - General Purpose

Cylinder Accessories
See the assortment
of accessories designed
to work with our products.
pg 34

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need.
pg 69

HD7513
Combo Kits HD20013
Most cylinders are available
in easy to order kits: Cylinder,
Gauge, Couplers, Hose
pg 64
and Pump.

Safety Instructions
Visit our DO’S and DON’TS
section to review the best
methods of operation.
pg 92
Always be prepared. HD10018

HD3008

Maximum Cylinder
Oil Capacity Collapsed Extended Cylinder
Cylinder Cylinder Capacity Effective Area
Stroke Model Weight Height Height Bore Dia.
Capacity
(in) Number Push Pull Push Pull Push Pull (lbs) A B C
(tons)
(ton) (ton) (in2) (in2) (in3) (in3) (in) (in) (in)

10.04 HD1010 11.40 3.80 2.24 0.74 22.41 7.47 26.7 16.12 26.19 1.69
10
11.97 HD1012 11.40 3.80 2.24 0.74 26.71 8.90 30.0 18.03 30.00 1.69
25 5.90 HD2506 25.70 13.39 5.14 2.68 30.35 15.81 24.8 10.56 16.46 2.56
8.15 HD3008 32.90 16.20 6.49 3.19 52.93 26.02 43.0 15.31 23.46 2.87
30
14.49 HD3014 32.90 16.20 6.49 3.19 94.09 46.26 60.6 21.65 36.14 2.87
6.18 HD5506* 55.70 16.20 10.99 3.19 67.93 19.74 70.5 13.03 19.21 3.74
55 13.19 HD5513* 55.70 16.20 10.99 3.19 144.94 42.11 104.0 20.04 33.23 3.74
20.12 HD5520* 55.70 16.20 10.99 3.19 221.09 64.24 146.2 28.86 49.98 3.74
6.10 HD7506* 81.70 25.90 16.09 5.12 98.10 31.21 93.7 13.70 19.80 4.53
75
13.11 HD7513* 81.70 25.90 16.09 5.12 210.93 67.06 136.8 20.71 33.82 4.53
6.57 HD10006* 104.40 48.60 20.57 9.58 135.23 62.98 138.6 14.06 20.63 5.12
10.13 HD10010* 104.40 48.60 20.57 9.58 208.30 97.10 169.2 17.67 27.80 5.12
100
13.11 HD10013* 104.40 48.60 20.57 9.58 269.66 125.58 193.6 20.63 33.74 5.12
18.15 HD10018* 104.40 48.60 20.57 9.58 373.31 173.86 248.3 27.05 45.20 5.12
6.57 HD20006 221.00 112.50 44.21 22.50 265.28 135.00 325.0 16.94 22.94 7.50
200 13.11 HD20013 221.00 112.50 44.21 22.50 574.78 293.00 440.0 23.94 36.94 7.50
24.00 HD20024 221.00 112.50 44.21 22.50 1061.00 528.00 616.0 36.13 60.13 7.50
300 6.57 HD30006 354.60 190.00 70.93 38.00 425.56 228.00 441.0 19.13 25.13 9.50

500 6.57 HD50006 565.70 315.00 113.15 63.00 678.92 378.00 953.0 22.75 28.75 12.00

1-888-332-6419
www.BVAhydraulics.com
 HD Series

Cylinders
Safety Practices
Y
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.
X
H
G

3/8"-18NPTF Relief Valve

All double acting cylinders are equipped with a
pressure relief valve located
next to the retract port.
These pressure relief valves
help prevent cylinder over
pressurization on the return
port side of the cylinder.
F E C D

J High-Flow Couplers
K High-Flow Coupler: CH38F is
included on all models (except
L where specified).
M Z
A

Base to Top to Rod Rod Collar Base Mounting Hole

Outside Rod Saddle Collar
Adv. Return Internal Thread Thread
Model Dia. Dia. Dia. Thread Bolt Thread
Port Port Thread Length Length Thread
Number D E F L Circle Depth
G H J K M Y
(in) (in) (in) (in) X Z
(in) (in) (in) (in) (in) (in)
(in) (in)
HD1010 2.87 1.38 1.38 1.42 2.09 1”-8 0.98 2¼”-14 1.02 1.30 ”-18 0.60

HD1012 2.87 1.37 1.38 1.42 2.09 1”-8 0.98 2¼”-14 1.02 1.30 ”-18 0.60
HD2506 3.62 1.77 1.50 0.98 1.93 1’-8 1.18 3 ”-12 0.98 2.30 ½”-13 0.70
HD3008 3.98 2.13 1.97 1.65 2.91 1½”-16 0.98 3 ”-12 1.93 2.20 ½”-13 0.70
HD3014 3.98 2.13 1.97 1.65 2.91 1½”-16 0.98 3 ”-12 1.93 2.20 ½”-13 0.70
HD5506* 5.00 3.14 2.76 1.14 2.87 1”-12 0.98 5”-12 1.73 3.70 ½”-13 0.70
HD5513* 5.00 3.14 2.76 1.14 2.87 1”-12 0.98 5”-12 1.73 3.70 ½”-13 0.70
HD5520* 5.00 3.14 2.76 1.14 2.87 1”-12 0.98 5”-12 1.73 3.70 ½”-13 0.70
HD7506* 5.75 3.75 2.76 1.18 2.80 1”-12 1.50 5¾”-12 1.50 4.00 ¾”-10 0.90
HD7513* 5.75 3.75 2.76 1.18 2.80 1”-12 1.50 5¾”-12 1.50 4.00 ¾”-10 0.90
HD10006* 6.97 3.75 2.95 1.22 2.95 1¾”-12 1.38 6⅞”-12 1.97 5.47 ¾”-10 0.98
HD10010* 6.97 3.74 2.95 1.22 2.95 1¾”-12 1.50 6⅞”-12 2.01 5.50 ¾”-10 0.98
HD10013* 6.97 3.75 2.95 1.22 2.95 1¾”-12 1.38 6⅞”-12 1.97 5.47 ¾”-10 0.98
HD10018* 6.97 3.75 2.95 1.50 2.95 1¾”-12 1.38 6⅞”-12 1.97 5.47 ¾”-10 0.98
HD20006 9.75 5.25 5.25 2.25 3.81 - - - - 5.00 1-8 1.00
HD20013 9.75 5.25 5.25 2.25 3.81 2½”-12 2.50 9¾”-12 2.13 5.00 1-8 1.00
HD20024 9.75 5.25 5.25 3.38 4.00 2½”-12 2.50 9¾”-12 2.13 5.00 1-8 1.00

HD30006 12.25 6.50 6.50 3.50 4.50 2½”-12 3.25 12¼”-12 2.31 6.25 1¼-7 1.75

HD50006 15.63 8.00 8.00 4.75 6.00 3¼”-12 4.25 15 ”-8 3.13 8.00 1¾-5 2.12

* 55-100 ton cylinders are equipped with carrying handles.