Scribd
Upload
71 views1 page

SH-53001-53004 Spring Support S-00-1360-244J Caracteristicas de Diseño

This document provides specifications for four types of spring support assemblies (SH-53001 through SH-53004). It lists key details for each including quantity, type, size, insulation thickness, operating temperature, load rating, spring constant, piping displacement coordinates, and dimensions. Notes provide additional context on quantities, reference documents, load and spring constant calculations, and displacement and dimension definitions.

Uploaded by

DAVID SOTO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views1 page

SH-53001-53004 Spring Support S-00-1360-244J Caracteristicas de Diseño

This document provides specifications for four types of spring support assemblies (SH-53001 through SH-53004). It lists key details for each including quantity, type, size, insulation thickness, operating temperature, load rating, spring constant, piping displacement coordinates, and dimensions. Notes provide additional context on quantities, reference documents, load and spring constant calculations, and displacement and dimension definitions.

Uploaded by

DAVID SOTO
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

JOB No. DOC. No. REV.

DATA SHEET 0-1100 S-00-1360-244J 4


SHEET 61 OF 64

TYPE OF SPRING SUPPORT ASSEMBLY


indication is given for material, manufacturer’s standard shall be applied.

ITEM No. SH-53001 SH-53002 SH-53003 SH-53004

QUANTITY (1) 1 1 1 1

TYPE (VS or CS) VS VS VS VS


TYPE OF SPRING SUPPORT
T T T T
ASSEMBLY (2)
SIZE NPS 18” 18” 18” 14”
INSULATION
PIPING mm 50 50 50 100
THICKNESS
TEMPERATURE °F(OPE.) 150 150 150 150

DESIGN CONDITIONS
3
OPERATING
Y LOAD ( ) kgf 680 689 729 985
4
SPRING CONSTANT ( ) kgf/mm 12.0 12.0 12.0 16.0
COORDINATION PIPING
Y Y Y Y
AXIAL DIRECTION
Z X 5
PIPING DISPLACEMENT ( )
COORDINA
-TION X mm -0.2 -0.2 +0.2 -4.0

Y mm +0.7 +0.7 +0.7 +0.8

Z mm +0.2 +0.3 +0.2 +1.1


SETTING
PIPING ELEVATION
DIMEN- EL.28705 EL.28705 EL.28705 EL.28628
SIONS (6)
a mm - - - -

h mm 1295 1295 1295 1372

l mm 1300 1300 1300 1300

ACCESSORY AND MATERIAL (7) ①③⑥ ①③⑥ ①③⑥ ①③⑥

LINE No. P535004 P535005 P535006 P530003


CAL’N SKETCH No. 100502-50 (I01) 100502-50 (Q01) 100502-50 (X01) 100501-50 (M01)
LINE CL. (PIPE MAT’L)
1CB2P (CS) 1CB2P (CS) 1CB2P (CS) 3CB2P (CS)
53-P-5301A 53-P-5301B 53-P-5301C 53-P-5301A
REMARKS 53-202J 53-202J 53-202J 53-202J
W/UNIVERSAL LOCK W/UNIVERSAL LOCK W/UNIVERSAL LOCK W/UNIVERSAL LOCK

Notes ( 1) Quantities required in cases E, F, H, K, Q, and R of “Type of Spring Support Assembly” are indicated by the
number of sets.
2
() Refer to Appendix-1.
3
() Loads in operation are shown by the total weight.
( 4) The spring constant with a value between 90%∼100% of the above-specified figure can be selected.
5
() Displacement of piping due to thermal expansion or contraction is calculated based on the erection
temperature.
6
() Dimensions “a”, “h” and “l” are shown in “Type of Spring Support Assembly”
( 7) Accessories are indicated by parts numbers shown in “Type of Spring Support Assembly”. Where no

D:\Documents and Settings\fuenteslj.PDVSA2000\Mis documentos\PARADA 2017\SPRINGHANGERS SUPORT\SPRING SUPPORT


S-00-1360-244J .doc FORM 2640-2 0

You might also like