SUGGESTED DESIGN SISTEMA F153.

10N
1 X 15” FULL RANGE CABINET

WAF153.00 DN10.17T HD1004

500 W AES 80 W AES 90° X 60°

WWW.LAVOCESPEAKERS.COM Lavoce Italiana

[email protected]
 CABINET CONSTRUCTION
OVERVIEW

- NET CABINET VOLUME l (ft3): 84 (2.97)

- SUGGESTED TYPE OF WOOD: BALTIC BIRCH PLYWOOD (18mm thickness)
- OTHER CONSTRUCTION DETAILS (CONNECTORS, HANDLING, WHEELS,…)
ARE USER’S CHOICE
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 1 / 21

 CABINET CONSTRUCTION
EXPLODED VIEW

7
9 11
4

5
3

2
12

10

1
8

NOTE: the project has been conceived to ITEM N° QTY DESCRIPTION PAGE
maximize the performance of the cabinet, 1 1 FRONT BAFFLE 3
therefore the coupling of the panels is
2 1 FRONT STIFFENER 4
made by milling. If a different coupling
method is used, the size of the internal 3 1 SIDE PANEL - RIGHT 5
panels must be recalculated 4 1 BACK PANEL A 6

5 1 BACK PANEL B 7

6 1 SIDE PANEL - LEFT 8

7 1 TOP PANEL 9

8 1 BOTTOM PANEL 10

9 2 VERTICAL DUCT 11

10 1 BRACKET 12

11 1 HORIZONTAL DUCT A 13

12 1 HORIZONTAL DUCT B 14
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 2 / 21

 CABINET CONSTRUCTION
ITEM 1 - FRONT BAFFLE

62 [2,44] 272 [10,71]

DRILL FOR WOODEN
147 [5,79] THREADED INSERT M6

]
588,2 [23,16] ,35
R0
R 9[
451,8 [17,79]

414,3 [16,31]

692 [27,24]
n357 [n14,06]

579 [22,78]
n395 [n15,55]

313,4 [12,34] 473 [18,62]

462 [18,17]

242,0 [9,53]
170,6 [6,72]

69,7 [2,74]

15 [0,59]
25,7 [1,01]

116,8 [4,60]
126,6 [4,99]
198,0 [7,80]
269,4 [10,61]

279,2 [10,99]

370,3 [14,58]

18 [0,71]

396 [15,59]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 3 / 21

 CABINET CONSTRUCTION
ITEM 2 - FRONT STIFFENER

269,4 [10,61]

370,3 [14,58]
126,6 [4,99]

198,0 [7,80]
25,7 [1,01]

18 [0,71]

15 [0,59]

414,3 [16,31]

18 [0,71]
°
45

313,4 [12,34]
443 [17,44]

242,0 [9,53]
DRILL FOR WOODEN
THREADED INSERT M6
170,6 [6,72]

69,7 [2,74]

n373 [n14,69]

396 [15,59]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 4 / 21

 CABINET CONSTRUCTION
ITEM 3 - SIDE PANEL - RIGHT

692 [27,24]

425 [16,73] 18 [0,71]

] °
35 65
R 0,
[

305 [12,01]
R9
36 [1,42]

150 [5,91] R9
[ R0
15 [0,59] ,35
18 [0,71]

455 [17,91] 18 [0,71] ]

18 [0,71]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 5 / 21

 CABINET CONSTRUCTION
ITEM 4 - BACK PANEL A

692 [27,24] 18 [0,71]

249 [9,80] 18 [0,71] 15 [0,59]

°
65
250 [9,85]

55
°

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 6 / 21

 CABINET CONSTRUCTION
ITEM 5 - BACK PANEL B

692 [27,24]
18 [0,71]

425 [16,73] 18 [0,71]

15 [0,59]

°
60
271 [10,65]

55
°

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 7 / 21

 CABINET CONSTRUCTION
ITEM 6 - SIDE PANEL - LEFT

692 [27,24]
18 [0,71]
18 [0,71] 425 [16,73]
15 [0,59]

°
60
331 [13,01]

36 [1,42]
150 [5,91]

R9
[R
0,
18 [0,71]

18 [0,71] 455 [17,91] 35

]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 8 / 21

 CABINET CONSTRUCTION
ITEM 7 - TOP PANEL

426 [16,77]

, 05]
18 [0,71]
77 [3,03] 236 [9,29] 77 [3,03]

R 45
44 [
18 [0,71] 18 [0,71] 15 [0,59]

R 11
20 [0,79]

150 [5,91]
18 [0,71]

305 [12,01]
331 [13,01]

5]
486 [19,13]

466 [18,34]

0, 3
[R
R9

°
130
12
0°

110° 18 [0,71]

18 [0,71]

234 [9,23]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 9 / 21

 CABINET CONSTRUCTION
ITEM 8 - BOTTOM PANEL

426 [16,77]
18 [0,71]

234 [9,23] 15 [0,59]

18 [0,71]

18 [0,71]
110°
°

130
0
12
486 [19,13]

°
331 [13,01]

305 [12,01]
36 [1,42]

R114
20 [0,79]

4 [R 4
5,
05]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 10 / 21

 CABINET CONSTRUCTION
ITEM 9 - VERTICAL DUCT

]
219 [8,62] 35
0,
[R
R9
132 [5,20]

18 [0,71]

QTY: 2 OFF

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 11 / 21

 CABINET CONSTRUCTION
ITEM 10 - BRACKET

218 [8,57] 18 [0,71]

33 [1,30]
110°
0°
415 [16,32]

12

130
289 [11,37]

265 [10,43]

4]
0,2
[R
R6

33 [1,30] 330 [12,99]

396 [15,59]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 12 / 21

 CABINET CONSTRUCTION
ITEM 11 - HORIZONTAL DUCT A

5]

]
35
,3

0,
0
[R

[R
R9

R9

132 [5,20]
80 [3,15]
18 [0,71]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 13 / 21

 CABINET CONSTRUCTION
ITEM 12 - HORIZONTAL DUCT B

R9

R9
[R

[R
0,

0,
35

35
]

]
132 [5,20]

80 [3,15] 18 [0,71]

7
9
4 11

5
3

12

6 10 8 1
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 14 / 21

 CABINET CONSTRUCTION
FRONT VIEW

426 [16,77]

390 [15,35]
59 [2,32]

216 [8,50]

246 [9,69]

686 [27,01]

722 [28,43]
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 15 / 21

 CABINET CONSTRUCTION
SIDE & TOP SECTION VIEW

486 [19,13]

448 [17,63] 38 [1,50]

279 [10,97]
132 [5,20]
486 [19,13]
216 [8,50]

246 [9,69]

A A
426 [16,77]
686 [27,01]

722 [28,43]

A-A
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 16 / 21

 CABINET CONSTRUCTION
DAMPING MATERIAL

NOTE: Damping material needs to be fixed DAMPING MATERIAL SPECIFICATIONS

to the cabinet, in a way that it always keeps
SYMBOL WIDTH HEIGHT THICKNESS NOTE
enough distance from the X-over PCB
P1 900 mm 240 mm 25 mm Polyester wool 500 g/m^2
and the magnet systems of the speakers. P2 900 mm 750 mm 25 mm Polyester wool 500 g/m^2
Distance from the magnets has to be at P3 900 mm 750 mm 25 mm Polyester wool 500 g/m^2
least 20mm to avoid over-heating of the
motors and reduce risk of fire. The X-over
PCB should be mounted into an open steel
housing to always keep the safety distance
from the damping material.
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 17 / 21

 CROSSOVER FILTER
CONSTRUCTION

SCHEMATIC

PTC1 C2 C3
R1
HF+
1.6 A 2.35 Ω
5.6 µF 8.2 µF R2 5Ω

L4 0.39 mH
L2 0.39 mH L3 0.68 mH

C4 4.7 µF
HF−

L1
IN+ LF+
1.8 mH
C1 22 µF

IN− LF−

BILL OF MATERIALS
RESISTORS
SYMBOL VALUE POWER TOLERANCE NOTE
R1 2.35 Ohm 60 W 5% Resistance can be split over parallel resistor to get the desired power rating
R2 5 Ohm 50 W 5% Resistance can be split over parallel resistor to get the desired power rating
CAPACITORS
SYMBOL VALUE VOLTAGE TYPE TOLERANCE NOTE
C1 22 uF 400 V MKP 5% Metallized Plastic Polypropylene Capacitor. High current/low loss
C2 5.6 uF 250 V MKT 5% Metallized Plastic Polyester Capacitor
C3 8.2 uF 250 V MKT 5% Metallized Plastic Polyester Capacitor
C4 4.7 uF 250 V MKT 5% Metallized Plastic Polyester Capacitor
INDUCTORS
SYMBOL VALUE WIRE DIAMETER TYPE TOLERANCE MAX RESISTANCE NOTE
L1 1.8 mH 1.4 mm IRON CORE 5% 0.3 Ohm High temperature coil body with core required
L2 0.39 mH 1 mm AIR CORE 3% 0.35 Ohm -
L3 0.68 mH 1 mm AIR CORE 3% 0.5 Ohm -
L4 0.39 mH 1 mm AIR CORE 3% 0.35 Ohm -
POSITIVE TEMPERATURE COEFFICIENT THERMISTOR
SYMBOL HOLD CURRENT MAXIMUM NOTE
VOLTAGE
PTC1 1.6 A 60 V Protection for compression driver DN10.17T
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 18 / 21

 PERFORMANCE
HF HORN
DN10.17T HD1004
LF
WAF153.00

FREQUENCY RESPONCE
110

100
@ Znom

90
@ 1W/1m

80
1W/1m
(dB)

70
SPL(dB)
SPL

60

50

40
20 100 500 1000 10000 20000

Frequency
Frequency(Hz)
(Hz)
Measurement hardware: Four Audio ROBO3 with WinMF software.
Smoothing 1/6 oct.

TOTAL HARMONIC DISTORTION

110 SPL 1W
THD 1W
100 THD 100W
(dB)
@ 10% THD

90
Distortion

80
Max SPL (dB)
Total Harmonic

70

60

50

40
20 100 500 1000 10000 20000
Frequency
Frequency(Hz)
(Hz)
Measurement hardware: Four Audio ROBO3 with WinMF software.
Crown IT12000 amplifier.

All measurements in class 1 semi-anechoic chamber using ground plane

technique, with microphone placed on-axis at 4m distance; measurements are
then normalized to 1w/1m in free-field condition.
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 19 / 21

 PERFORMANCE
HF HORN
DN10.17T HD1004
LF
WAF153.00

IMPEDANCE
60
@ Znom

40
Impedance
SPL (Ohm)
(dB) 1W/1m

20

0
10 100 500 1000 10000 20000
Frequency (Hz)
Frequency (Hz)

Measurement hardware: Four Audio ROBO3 with WinMF software.

Smoothing 1/6 oct.

MAX SPL
140

135
- Znom - 10% THD

130
SPL (dB) @ 10% THD

125

120

115
1000W

110
SPL (dB) @Max

105

100

95

90
50 100 500 1000 10000
Frequency (Hz)
Frequency (Hz)
Measurement hardware: Four Audio ROBO3 with WinMF software.
Crown IT12000 amplifier

All measurements in class 1 semi-anechoic chamber using ground plane

technique, with microphone placed on-axis at 4m distance.
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 20 / 21

 PERFORMANCE
HF HORN
DN10.17T HD1004
LF
WAF153.00

HORIZONTAL PLANE
POLAR PLOT DIRECTIVITY CONTOUR PLOT
0
30 330
0

60 −10 300

−20

90 270
−30

120 240

150 210
180

500 Hz 1 kHz 5 kHz 10 kHz 20 kHz

Measurement hardware: Four Audio ROBO3 with WinMF software.

VERTICAL PLANE
POLAR PLOT DIRECTIVITY CONTOUR PLOT
0
30 330
0

60 300
−10

−20

90 270
−30

120 240

150 210
180

500 Hz 1 kHz 5 kHz 10 kHz 20 kHz

Measurement hardware: Four Audio ROBO3 with WinMF software.

All measurements in class 1 semi-anechoic chamber; measurements are then

normalized with respect to on axis values. Smoothing 1/12 oct.
rev_B.a

SUGGESTED DESIGN SISTEMA F153.10N 21 / 21

 WWW.LAVOCESPEAKERS.COM

International sales dept - Italy - T +39 0733 870 840 - M +39 349 4760452 - F +39 0733 870 880 - [email protected]
Sales office - China - T +86 573 8910 5856 - M +86 186 2181 7905 - F +86 573 8910 5859 - [email protected]
[email protected]