Scribd
Upload
228 views

Project Format For 8th Sem

The document outlines the typical format and structure for a project report, including: 1. Cover page, certificates, acknowledgements, table of contents, lists of tables/figures 2. 10 chapters covering the introduction, requirements, design, implementation, testing, conclusions 3. Instructions for formatting the report with specifics on font, margins, page numbering, and other layout details. The report format provides a standardized template for students to document their project work, with an emphasis on proper formatting and organization of content.

Uploaded by

ayush negi
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
228 views

Project Format For 8th Sem

The document outlines the typical format and structure for a project report, including: 1. Cover page, certificates, acknowledgements, table of contents, lists of tables/figures 2. 10 chapters covering the introduction, requirements, design, implementation, testing, conclusions 3. Instructions for formatting the report with specifics on font, margins, page numbering, and other layout details. The report format provides a standardized template for students to document their project work, with an emphasis on proper formatting and organization of content.

Uploaded by

ayush negi
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 7

Project Report Format

I Cover Page
II Inner Pages
a) Certificate by Company/Industry/Institute
b) Declaration by student
c) Acknowledgement
III About Company/Industry/Institute
IV Table of Contents
V List of Tables
VI List of Figures
VII Abbreviations and Nomenclature (If any)

Chapters
1 Introduction to Project Feasibility Analysis
2 Software Requirement Specification
3 Introduction and detail of software used
4 System Design(DFD, ER, Database diagram, etc)
5 System Implementation And Testing
6 Implementation(Modules)
7 Testing(Test Cases)
8 Screenshots
9 Conclusions and Future Scope
10 References/ Bibliography

External viva training report shall be hard bound with cover page in Black color.
The name of the students, degree, duration of training period, name of the
university including institute name shall be printed in Golden letters on the cover
page.

Students have to upload soft copy of report, ppt of project, Internship Completion
Letter from company, Offer letters save with Rollno_Name_ Company.
(If u have multiple offers upload ZIP file Save with Rollno) by 5 th June
INSTRUCTIONS FOR TRAINING REPORT

1. A chapter may be further divided into several divisions and sub - divisions
depending on type & volume of work. This contains the text & related to
hardware & software implementation.

2. The project report must be submitted in Two Copies (one for department and
2nd for library) duly signed by the HOD. Students should also submit the soft
copy on CD in PDF and word format in the library (2 Copies of CD).

3. The length of the report may be about 70-80 pages.


4. The Project report shall be computer typed (English- British, Font - Times
Roman, Size-12 point) and printed on A4 size paper.
5. The Project report shall be typed with 1.5 line spacing with a margin 3.5 cm on
the left, 2.5 cm on the top, and 1.25 cm on the right and at bottom. Every page
in the report must be numbered. The page numbering, starting from
acknowledgements and till the beginning of the introductory chapter, should be
printed in small Roman numbers, i.e, i, ii, iii, iv...... The page number of the
first page of each chapter should not be printed (but must be accounted for).
All page numbers from the second page of each chapter should be printed
using Arabic numerals, i.e. 2,3,4,5... All printed page numbers should be
located at the bottom centre of the page.
6. In the Project report, the title page should be given first and printed
in black letters.
8. The table of contents should list all headings and sub-headings.
The title page and certificates will not find a place among the
items listed in the Table of Contents. One and a half line spacing
should be adopted for typing the matter under this head.
9. The list of tables should use exactly the same captions as they
appear above the tables in the text. One and a half spacing should
be adopted for typing the matter under this head.
10. The list of figures should use exactly the same captions as they
appear below the figures in the text. One and a half spacing should
be adopted for typing the matter under this head.
11. The list of symbols, abbreviation & nomenclature should be
typed with one and a half line spacing. Standard symbols,
abbreviation etc should be used.
12. Subject matter must be typed on single side of the page.
13. All the pages must be numbered properly.
SEMESTER TRAINING REPORT
(Times New Roman, 24 pt. Bold)

On
TITLE OF PROJECT
(Times New Roman, 16 pt. Bold)

Submitted in partial fulfillment of requirements


for the award of the degree

Bachelor of Technology
In
Computer Science and Engineering

To
Punjab Technical University, Jalandhar

SUBMITTED BY:
Name:
Roll no.:
Semester:
Batch:

Under the guidance of


Dr./Mr/Ms____

DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING


Chandigarh Engineering College –Landran
Mohali, Punjab - 140307
CERTIFICATE
(16 Times New Roman, bold)

This is to certify that Mr. / Ms.___________________________ has partially completed /


completed / not completed the Semester Training during the period from_______
to_______ in our Organization / Industry as a Partial Fulfillment of Degree of Bachelor
of Technology in Computer Science & Engineering.

(Signature of Project supervisor )

Date: ____________________
DECLARATION (16 Times New Roman)

I hereby declare that the Project Report entitled ("Title of the project") is an authentic
record of my own work as requirements of 8th sem academic during the period from
______ to _____ for the award of degree of B. Tech. ( Computer Science & Engineering ,
College name under the guidance of (Name of Project Guide/CCs).
(12 size)

(Signature of student)
(Name of Student)
(University Roll No.)
Date: ____________________

Certified that the above statement made by the student is correct to the best of our
knowledge and belief.

Signatures

Examined by:

1. 2. 3. 4.

Head of Department
(Signature and Seal)
ACKNOWLEDGMENT
I take this opportunity to express my sincere gratitude to the Director- Principal Dr.
Rajdeep Singh Chandigarh Engineering College, Landran for providing this opportunity
to carry out the present work.
I am highly grateful to the Dr. Sukhpreet Kaur HOD CSE, Chandigarh Engineering
College, Landran (Mohali). I would like to expresses my gratitude to other faculty
members of Computer Science & Engineering department of CEC, Landran for providing
academic inputs, guidance & Encouragement throughout the training period. The help
rendered by Mr. Rajeev Sharma , Supervisor for Experimentation is greatly
acknowledged. Finally, I express my indebtedness to all who have directly or indirectly
contributed to the successful completion of my software training.

You might also like