Safety Data Sheet

MAPEFLUID N 190
Safety Data Sheet dated: 23/01/2021 - version 1
Date of first edition: 23/01/2021

1: Identification
GHS Product Identifier
Mixture identification:
Trade name: MAPEFLUID N 190
Trade code: 9008649
Recommended use of the chemical and restrictions on use
Recommended use: Admixture for concrete
Uses advised against: Data not available
Supplier's details
Company: MAPEI CONSTRUCTION CHEMICALS L.L.C
P.O. BOX 73869 DUBAI - United Arab Emirates
Responsible: [email protected]
Emergency phone number
Office: 00971 4 8156666
Office: 00971 4 8156666
Factory : 00971 4 8858428

2: Hazard identification
Classification of the substance or mixture

0 The product is not classified as dangerous according to GHS - Seventh revised edition.
Adverse physicochemical, human health and environmental effects:
No other hazards
GHS label elements, including precautionary statements

The product is not classified as dangerous according to GHS - Seventh revised edition.
Other hazards which do not result in a classification
No other hazards

3: Composition/information on ingredients
Substances
Not available
Mixtures

Hazardous components within the meaning of GHS and related classification:

None

4: First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Wash with plenty of water and soap.
In case of eyes contact:
Wash immediately with water.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
Remove casualty to fresh air and keep warm and at rest.
Most important symptoms/effects, acute and delayed
Not available
Indication of immediate medical attention and special treatment needed, if necessary
Treatment: Not available
(see paragraph 4.1)

5: Fire-fighting measures
Extinguishing media
Suitable extinguishing media:
Print date 29/03/2022 Production Name MAPEFLUID N 190 Page n. 1 of 5
Suitable extinguishing media:
Water.
Carbon dioxide (CO2).
Unsuitable extinguishing media:
None in particular.
Special hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: Not available
Explosive properties: ==
Oxidizing properties: Not available
Special protective actions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.

6: Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Remove persons to safety.
Environmental precautions
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Limit leakages with earth or sand.
Methods and material for containment and cleaning up
Suitable material for taking up: absorbing material, organic, sand
Retain contaminated washing water and dispose it.

7: Handling and storage

Precautions for safe handling
Avoid contact with skin and eyes, inhalation of vapours and mists.
Do not eat or drink while working.
See also section 8 for recommended protective equipment.
Conditions for safe storage, including any incompatibilities
Keep away from food, drink and feed.
Incompatible materials:
None in particular.
Instructions as regards storage premises:
Adequately ventilated premises.

8: Exposure controls/personal protection

Control parameters

No data available
Appropriate engineering controls: Not available
Individual protection measures, such as personal protective equipment (PPE)
Eye protection:
Not needed for normal use. Anyway, operate according good working practices.
Protection for skin:
No special precaution must be adopted for normal use.
Protection for hands:
Suitable materials for safety gloves; EN ISO 374:
Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min.
Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time >=480min.
Butyl rubber - IIR: thickness >=0,5mm; breakthrough time >=480min.
Fluorinated rubber - FKM: thickness >=0,4mm; breakthrough time >=480min.
Respiratory protection:
Personal Protective Equipment should comply with relevant CE standards (as EN ISO 374 for gloves and EN ISO 166 for goggles),
correctly maintained and stored. Consult the supplier to check the suitability of equipment against specific chemicals and for user
information.

9: Physical and chemical properties

Physical state Liquid
Print date 29/03/2022 Production Name MAPEFLUID N 190 Page n. 2 of 5
 Physical state Liquid
Color: light brown
Appearance: liquid
Odour: Characteristic
Odour threshold: Not available
pH: 5.10
Melting point / freezing point: Not available
Initial boiling point and boiling range: 100 °C (212 °F)
Flash point: Not available
Evaporation rate: Not available
Solid/gas flammability: Not available
Upper/lower flammability or explosive limits: Not available
Vapour pressure: Not available
Vapour density: ==
Relative density: 1.08 g/cm3
Solubility in water: Soluble
Solubility in oil: Insoluble
Partition coefficient (n-octanol/water): Not available
Auto-ignition temperature: Not available
Decomposition temperature: Not available
Viscosity: Not available

10: Stability and reactivity

Reactivity
Stable under normal conditions
Chemical stability
Data not available.
Possibility of hazardous reactions
None.
Conditions to avoid
Stable under normal conditions.
Incompatible materials
None in particular.
Hazardous decomposition products

11: Toxicological information

Information on toxicological effects

Toxicological information of the product: No data available

12: Ecological information

Ecotoxicity
Adopt good working practices, so that the product is not released into the environment.
Eco-Toxicological Information:

List of Eco-Toxicological properties of the product

No data available
Persistence and degradability

Not available
Bioaccumulative potential

Not available
Mobility in soil

Not available
Other adverse effects

No Components with evironmental hazard properties found.

13: Disposal considerations

Disposal methods
The generation of waste should be avoided or minimized wherever possible. Recover if possible.
Methods of disposal:
Print date 29/03/2022 Production Name MAPEFLUID N 190 Page n. 3 of 5
Methods of disposal:
Disposal of this product, solutions, packaging and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local authority requirements.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor.
Do not dispose of waste into sewers.
Clean waste packaging should be recycled when possible and authorized by the authority.
Disposal considerations:
Do not allow to enter drains or watercourses.
Dispose of product according to all federal, state and local applicable regulations.
If this product is mixed with other wastes, the original waste product code may no longer apply and the appropriate code should be
assigned.
Dispose of containers contaminated by the product in accordance with local or national legal provisions. For further information,
contact your local waste authority.
Special precautions:
This material and its container must be disposed of in a safe way. Care should be taken when handling untreated empty containers.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Empty containers or liners may retain some product residues. Do not re-use empty containers.

14: Transport information

Not classified as dangerous in the meaning of transport regulations.
UN number
Not available
UN proper shipping name
Not available
Transport hazard class(es)
Not available
Packing group, if applicable
Road and Rail ( ADR-RID ) :
Not available
Air ( IATA ) :
Not available
Sea ( IMDG ) :
Not available
Environmental hazards
Marine pollutant: No
Environmental Pollutant: Not available
Special precautions for user
Not available
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Not available

15: Regulatory information

Safety, health and environmental regulations specific for the product in question
This Safety Data Sheet has been prepared according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS),
Fifth revised edition.
SCAQMD Rule 1113 : NA
SCAQMD Rule 1168: NA

16: Other information

This document was prepared by a competent person who has received appropriate training.
Main bibliographic sources:
ECDIN - Environmental Chemicals Data and Information Network - Joint Research Centre, Commission of the European
Communities
SAX's DANGEROUS PROPERTIES OF INDUSTRIAL MATERIALS - Eight Edition - Van Nostrand Reinold
Insert here further consulted bibliography
The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and
constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to the specific use intended.
This SDS cancels and replaces any preceding release.
Legend to abbreviations and acronyms used in the safety data sheet:
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road.
RID: Regulation Concerning the International Transport of Dangerous Goods by Rail.
Print date 29/03/2022 Production Name MAPEFLUID N 190 Page n. 4 of 5
 RID: Regulation Concerning the International Transport of Dangerous Goods by Rail.
IMDG: International Maritime Code for Dangerous Goods.
IATA: International Air Transport Association.
IATA-DGR: Dangerous Goods Regulation by the "International Air Transport Association" (IATA).
ICAO: International Civil Aviation Organization.
ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO).
GHS: Globally Harmonized System of Classification and Labeling of Chemicals.
CLP: Classification, Labeling, Packaging.
EINECS: European Inventory of Existing Commercial Chemical Substances.
INCI: International Nomenclature of Cosmetic Ingredients.
CAS: Chemical Abstracts Service (division of the American Chemical Society).
GefStoffVO: Ordinance on Hazardous Substances, Germany.
LC50: Lethal concentration, for 50 percent of test population.
LD50: Lethal dose, for 50 percent of test population.
DNEL: Derived No Effect Level.
PNEC: Predicted No Effect Concentration.
TLV: Threshold Limiting Value.
TWATLV: Threshold Limit Value for the Time Weighted Average 8 hour day. (ACGIH Standard).
STEL: Short Term Exposure limit.
STOT: Specific Target Organ Toxicity.
WGK: German Water Hazard Class.
KSt: Explosion coefficient.

Print date 29/03/2022 Production Name MAPEFLUID N 190 Page n. 5 of 5