Scribd
Upload
113 views2 pages

Half Bridge Driver Based On: C2 1uF/25V CN1 C5 10uF/25V D1 MBRS140T3G C3 220uF/63V

Uploaded by

ratna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views2 pages

Half Bridge Driver Based On: C2 1uF/25V CN1 C5 10uF/25V D1 MBRS140T3G C3 220uF/63V

Uploaded by

ratna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Half Bridge Driver based on ir2104

This Half-bridge driver based on IR2104 gate driver IC and N channel Dpak MOSFET , The IR2104 is a high
voltage, high speed power MOSFET driver with independent high and low side referenced output channels.
HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is
compatible with standard COMOS or LSTTL output, down to 3.3V logic. A gate IR2104 driver is a power amplifier
that accepts a low-power input from a controller IC and produces a high-current drive input for the gate of a high-
power transistor such as a power MOSFET. In essence, a gate driver consists of a level shifter in combination
with an amplifier.
This drive has many application, ranging from DC-DC power supply for high power density and efficiency, This
project simplifies the design of control systems for a wide range of motor applications such as home appliances,
industrial drives, DC brushed motors , Brushless motors, fans, Tesla Coil driver, Induction coil driver, LED driver,

Features
Load Supply 12 to 36V DC
Load Current 10Amps (Peak 20Amps)
Logic Supply 12 To 15V DC
Input Signals 3.3V to 15V
SMD based tiny design
Required Single PWM input
Shutdown Input
Screw Terminals for Load and Load Supply
Header Connector for Logic supply and inputs Top Bottom

Required : Single PWM input and Shutdown C5


C2
+

10uF/25V 1uF/25V CN1


D1 +V

0.22uF MBRS140T3G + C3 C1 GND


C4 220uF/63V 0.1uF
CN3 U1 DIP8 12 T O 36V DC
1 VCC 1 8
2 SIN/HIN VCC VB Q1 CN2
3 SDN/LIN 2 7 R1 22E LR024N DPAK GND
4 GND IN HO
3 6 +LD
SIP4 SD VS
4 5 R2 Load
GND LO 22E Q2
IR2104 LR024N DPAK

03038

www.twovolt.com www.youtube.com/thetwovolt Author Rajkumar Sharma www.koteq.com ©


Half Bridge Driver based on ir2104

1 1 CN1 2 PIN SCREW TERMINAL


2 1 CN2 2 PIN SCREW TERMINAL
3 1 CN3 4 PIN HEADER
4 1 C1 0.1uF SMD 1206
5 1 C2 1uF/25V SMD 1206
6 1 C3 220uF/63V
7 1 C4 0.22uF SMD 1206
8 1 C5 10uF/25V
9 1 D1 MBRS140T3G
10 2 Q1,Q2 LR024N DPAK
11 2 R1,R2 22E SMD 1206
12 1 U1 IR2104 SMD SO8

VCC 12-15V
PWM IN
Shutdown
GND

Shutdown-H=Enable
Shutdown-L= Disable

03038

www.twovolt.com www.youtube.com/thetwovolt Author Rajkumar Sharma www.koteq.com ©

You might also like