Stand Alone

DVR SYSTEM

USER’S
MANUAL

Revision Date : 2004. 12. 31.

Firmware 2.0 Version
Ex-Factory Date : 2005. 01. 29
• Supplement List

F/W VER. 1.6

Amend Date : 2004.11.30

♦ Manual is Updated as Below.

1. Server DVR
① PTZ Control (p.62)
* PRESET Function Add : PELCO-D PROTOCOL
* SWING Function Add : DONGYANG CAMERA (D-MAX)

F/W VER. 2.0

Amend Date : 2004.12.31

1. Server DVR
① 2 Way Audio Conference (p.64)

* 2 Way Audio Supply between Remote Client

② Dynamic IP (DHCP) support (p.65)

* DHCP Network IP Supply

③ CD-RW Backup (by AVI) (p.66)

* CD Backup Supply

2. Remote PC
① Web Client (p.60)

* Remote Agent Viewer (Live only)

② Multi Client User (p.57)

* Max 4 people

③ Remote Setup (p.56)

④ 2 Way Audio Conference (p.46)

* 2 Way Audio Supply between DVR Server

• INDEX
• CHAPTER 1 Specification & System organization
1. Specification ------------------------------------------------------- 5
2. Product Contents List ------------------------------------------------- 8
3. System Organization -------------------------------------------------- 9
• CHAPTER 2 Description
1. Front Panel ------------------------------------------------------- 11
2. Rear Panel -------------------------------------------------------- 13
3. Remote Controller --------------------------------------------------- 14
• CHAPTER 3 Installation
1. Hard Disk Installation ------------------------------------------------ 15
2. Camera Connection ------------------------------------------------- 19
3. Monitor Connection ------------------------------------------------- 19
4. Computer Connection ------------------------------------------------ 19
5. Network Connection ------------------------------------------------- 19
6. Alarm/Relay/PTZ Connection ------------------------------------------ 20
7. Power Connection -------------------------------------------------- 20
8. Finishing Installation ------------------------------------------------- 21
※. Hard Disk Format ----------------------------------------------- 21
• CHAPTER 4 Display
1. System Power On -------------------------------------------------- 22
2. Screen View Selection ------------------------------------------------ 22
3. Screen Rotation Mode (SCR MODE) -------------------------------------- 23
4. PTZ/FOCUS Control ------------------------------------------------ 23
5. System Power Off -------------------------------------------------- 24
• CHAPTER 5 Search
⊙ Go to Search Mode -------------------------------------------------- 25
1. Search by Date/Time ------------------------------------------------ 25
2. Search by Event ---------------------------------------------------- 26
• CHAPTER 6 MENU
⊙ Go to Menu --------------------------------------------------- 28
⊙ Initial Menu --------------------------------------------------- 28
1. Display ----------------------------------------------------------- 29
2. Record ----------------------------------------------------------- 29
3. Camera ---------------------------------------------------------- 34
4. Audio ------------------------------------------------------------ 35
5. Alarm ------------------------------------------------------------ 36
6. System ----------------------------------------------------------- 37
• CHAPTER 7 Client
⊙ Remote Program Install ----------------------------------------------- 41
1. Display ---------------------------------------------------------- 44
2. Search ---------------------------------------------------------- 47
3. Setting ---------------------------------------------------------- 54
4. Web-Client ------------------------------------------------------ 58
• Supplement List
1. PTZ Control
1.1 PTZ Control ------------------------------------------------- 60
1.2 FOCUS/IRIS Control ------------------------------------------- 60
1.3 PRESET Control ----------------------------------------------- 61
1.4 SWING Control ----------------------------------------------- 61
2. 2 Way Audio Conference -------------------------------------- 62
3. Dynamic IP (DHCP) Support ----------------------------------- 63
• Specification & Organization

1. Specification

5
• Specification & Organization

1. Specification

Video standard PAL/NTSC

Audio 2-way Audio conference
Monitor display Real time:25 Fps (PAL), 30Fps(NTSC) per camera
Covert camera operation Programmable
Event/Log search Up to 1,000,000 for user login/out, config changes,
remote access, connects/disconnects
Record Scheduling Daily, Weekly adjust specific Hr per channel
Remote Access Web Monitoring (IE), Remote Viewer,
Simultaneously 4 users support
Playback Single and quad picture
Pre/Post alarm recording 5 secs(Pre), 3 mins(Post), programmable per camera

VGA For monitors with Multi Sync Function only

Activity detection 12x12 grid, Sensitivity levels: 10
Simplex/Duplex operation Triplex
Video inputs 4 x 1Vp-p, CVBS, 75ohms, BNC, looping inputs
Monitor outputs 1 x CVBS/S-VHS, VGA (option)
Spot output 1 x 1Vp-p, CVBS, 75ohms, BNC
Audio inputs 4 x line-in, RCA sockets
Audio output 1 x line-out, RCA socket
Resolution 352x240,704x240,704x480(NTSC)
352x288,704x288,704x576(PAL)
Compression standard Modified Mpeg4
Recording speed 352x240 : 120/100 (NTSC/PAL)
704x240 : 60/50 (NTSC/PAL)
704x480 : 30/25 (NTSC/PAL)
Image size 3-5 Kbyte (352x240, 352x288)
5-10 Kbyte (704x240, 704x288)
6-16 Kbyte (704x480, 704x576)
Hard disk capacity Unlimited within 4 x HDD
Secondary Storage (Option) USB 1.1 memory stick or LG CD-RW
Alarm inputs 4 x TTL, programmable as NC/NO

6
• Specification & Organization

Alarm outputs 1 x Relay with NO/NC contact;

30VDC/1A, 125VAC/0.5A resistive
Back-up file formats AVI, JPG, BMP
Network Speed Control 8 levels
Pre-alarm recording Up to 5 sec., programmable per camera
Firmware Version Ver 2.0
Menu languages English, Other languages (Option)
Ethernet interface 10/100-Base-TX, RJ-45
Remote Function Live View, Live Recording, Search, Set-up, Back-up
PTZ Control RS-485 interface
Supply voltage 100VAC-240VAC, 1/0.5A, 60/50Hz
Power consumption Approx. 60watts
Temperature range 5℃ to 50℃
Housing Steel metal
Color Black
Dimensions (HxWxD) 44x360x360mm
Weight 5kg

The reference recording time table

Quality Highest High Standard Low

Record
4Ch (CIF/30Fps) 352x240 41Hr 58Hr 93Hr 154Hr
4Ch (2CIF/15Fps) 704x240 37Hr 46Hr 74Hr 123Hr

4Ch (D1/7Fps) 704x480 19Hr 23Hr 38Hr 61Hr

4Ch (D1/1Fps) 704x480 93Hr 132Hr 154Hr 185Hr

7
• Specification & Organization

2. Product contents List

Please Confirm the Contents When open Package.

① Basic Contents

Stand Alone DVR 12V Adaptor Power Cable

User’s Manual Remote Controller Remote Client AAA Battery X 2

Program Install CD

① Option Contents

HDD VGA OUT Install Kit

8
• Specification & Organization

3. Organization

Alarm Sensor #1-4 Relay Out

Remote Client PC

Camera #1-4 Alarm Input/Out

NETWORK
TCP/IP

Video In

Image Printer
Video Out

Remote
Controller

VGA
VCR AV Monitor
Monitor

9
• Description

1. Front panel

① ④

② ⑤ ⑦ ⑨ ⑪

① Power : System Power On/Off

② Led indicator : Indicate Present System Status information.
( POWER: System On/Off , RECORD: Record On/Off , NETWORK: Client Network Connection Status
ALARM: Alarm Sensor Detection Status )

③ Channel Select button : Select Channel or Input Password.

④ SCR MODE : Select Screen Division Mode or Rotation Mode.
⑤ MENU : Go to System Menu.
⑥ SEARCH : Go to Search Mode for Searching Recorded Data.
⑦ PTZ/FOCUS : Go to Camera PTZ/FOCUS Control.
⑧ Remote Controller Sensor Input.
⑨ Search Controller : Searching Recorded Data or Control menu & PTZ/FOCUS.
⑩ ENTER : Apply Changing Setup.
⑪ RETURN : Cancel Setup or Return Previous Mode.

Tip
• Power Button is Soft Style to Prevent System Failure by Wrong Operation.
• Channel Selection Button is Prior to SCR Mode.
• When Remote Controller Sensor Input is Blocked by Something, it Cause
1 Remote Controller do NOT Work Properly.
• When Press any Button, it Operate with Beep Sound.

11
• Description

2. Rear Panel

① ③ ⑥ ⑨ ⑪ ⑫

② ④ ⑤ ⑦ ⑧ ⑩ ⑬

① Video In : BNC Port for Connection of DVR & Camera. (4 Camera Connectable)
② Loop Back : Output DVR Camera Video to Loop Back Port. (4 BNC Port)
③ Monitor Out : Output DVR Video to AV Monitor.
④ Spot Out : Output Spot-out Video to AV Monitor.
⑤ NTSC/PAL : Select NTSC or PAL Type.
⑥ VGA OUT : Output Video to a Computer Monitor by Connected VGA.
⑦ SVHS : Output Video by Connected SVHS.
⑧ Audio Out : Output Audio Data.
⑨ Audio In : Audio Input Terminal Related with #1~4 Camera.
⑩ Ethernet (TCP/IP) : Port for Cross cable. (Possible to Remote Surveillance.)
⑪ Alarm/Relay/RS-485 : Connect Port for Sensor, Relay, & PTZ.
⑫ RS-232C : Connect Port for Program Debug.
⑬ DC Power Input : Power Supply by DC 12V Adaptor.

Tip
• When System Installation, Please Install under System Power Off Status.
• Please Use Specific Adaptor when Power Supply.

13
 • Description

3. Remote Controller

POWER MENU: Open Menu

System
ON/OFF Channel Selection Button
(4ch Available, #1~4 Button)

RETURN ENTER: Apply Setup Change

Cancel Setup
or Return to Search Controller : Control Playback Option,
Previous Menu Movement, PTZ/Focus Control

Change Open PTZ/IRIS Mode

Screen Mode Search Mode

• Unused Button’s Description is Omitted.

• Every Button is Operated Same as Front Panel Button.
• Remote Controller can Operate when Remote Controller Sensor Input Part Reacted Each Other.
※ If there are many DVR at the same place, they are reacted together when press remote controller.

14
• Installation

1. Hard Disk Installation

① Jumper Setup as Master or Slave

• Jumper Setup as master or Slave, Following the

` Direction of Surface of Hard Disk.

• Jumper Located at Hard Disk Data Cable or

1 Rear Side of Hard Disk.

• If One Hard Disk Installation, Setup as Master

If Two Hard Disk Installation, Second One Setup as Slave.

‼ When Hard Disk Add or Exchange, Must System Off

Properly (System Off by Power Button). If not, it’s a
Cause of Fatal Hard Disk Error.‼

※ Example of Samsung HDD Jumper Setup

• Refer to General Pin Setting in Jumper Pin Setting on HDD Surface.

• When One HDD Install, Setup Pin as Master and Connect Pin
1 at the Left End of Jumper.
• When Two HDD Install or Additional Install, First One Setup as
1 Master and the Other is for Slave. Slave Setup has No Pin.
• When More than Two HDD install, Setup as Master or Slave
1 to Connect One IDE Cable at the Same Method of Above.

!!Please Use Hard Disk which Possible to Supply Higher than

UDMA66.!!

② IDE Cable Connection to Main Board

• Confirm the IDE Cable Inside of Product

• Among the Three Connector, Indicated Blue Color

1 Connector Must be Connected with Main Board. Other
1 Connectors Connected with HDD

15
• Installation

② Connect IDE Cable to Hard Disk

• Insert Disk, Red Cable Head to Power Cable Plug

• Connect Power Cable to Hard Disk in the Same Way

※ If One HDD Install, Connect with End of Connector (Black)

Recommended.

If Add HDD, Connect with Middle Connector (Gray)

Recommended.

One HDD Installation Two HDD Installation Bracket Installation

③ After Finishing Cable Connection, Attach Hard Disk with Screw & Bracket

Tip ㅡMaster, Slave?

• IDE Hard Disk can connect two equipment at one

cable (port). For the purpose of prevent
confusing, two equipment named ‘Master’ &
‘Slave’. ’Master’ is one hard disk or first hard
disk and ‘Slave’ is below second hard disk.

16
• Installation

2. Camera Connection
Connect Camera at BNC Port in Back Side Panel.

3. Monitor Connection
Connect Monitor Terminal or S-VHS Terminal to Monitor

4. Computer Connection
Connect VGA OUT Terminal to Computer Monitor

5. Network Connection
Connect Ethernet Terminal and Network Cable

19
• Installation

6. Alarm/Relay/PTZ Connection

③
① ②

① ALARM
Alarm Input - ‘IN1, IN2, IN3, IN4’ : Connect Sensor Input by Channel
‘GND’ : Connect Ground System
② RELAY
Alarm Output – ‘NO, NC’ : After Checking Alarm Output Type (Normal Open or Normal Close)
and Connect to ‘NO, NC’
‘COM’ : Connect Remain Grounding Conductor
③ RS-485
Connect PTZ Camera – ‘D+, D-’ : Connect PTZ Camera Control Line (+ , – Terminal)

RS485 PTZ 14 Pin Cable

D+ ⑨ R+
D- ⑩ R-
⑪ T+
⑫ T-

Example of Connection PTZ Camera No. 14 Pin Connector

7. Power Connection
Connect DC Power Input Terminal and Specific Adaptor

20
• Hardware Install

8. Finishing Installation
System Start by Power Button after Finishing Installation

※ Hard Disk Format

- If Do Not New Hard Disk Format, System Can’t Recognize the HDD.
So it’s Same Situation of No HDD. Please Format HDD when Insert New HDD.
(Only Display Possible, Not Work Menu & Search)

2. New HDD Format

(Select By Play , Backward
Play Key)
1. Power On

3. System Start
(Initial Mode)

21
• Display

1. System Power ON

• Press Power Button to Start System

• After Checking Hard Disk, Need input Password to
1 Operation
• Initial Screen View Mode is Quad Division Mode
1 and Recording Mode

CAMERA

2004/01/01
00:00:00

Picture for Power On

after Finishing Installation • Each Channel Indicate Camera Name & Recording Status
• Present Time & Date Indicate at Monitor Central Lower Side

Tip • Check System Condition at LED

POWER : Showing System On/Off
RECORD : Showing Record On/Off
NETWORK : Showing Client Connection Status
ALARM : Lighting when Sensor Alarm Activate

2. Select Screen Mode

• Select One Channel among 4 Channels

• Move to One Enlargement Watch Mode when Quad Screen Division Mode
• Move to One Enlargement Watch Mode when Rotation Mode

22
• Display

3. Screen Rotation Mode (SCR MODE)

• User can Select 3 Kinds Watch Mode

SCR MODE
① Quad (4CH) Division Watch Mode
② Selected 1CH Watch Mode
③ 4CH Rotation Watch Mode
• Quad (4CH) Watch Mode is Initial Mode when System Start

Quad (4CH) Division Selected 1CH 4CH Rotation Mode

Watch Mode Watch Mode

4. PTZ/FOCUS Control

• Control Camera PTZ (Pan/Tilt/Zoom) & Focus (Only Useable for Proper Camera)
• Press PTZ/FOCUS Button to Open PTZ Menu at Right-Under Side and Control by
PTZ/FOCUS
1 Search Controller
• Press PTZ/FOCUS Button Second Time to Open FOCUS/IRIS Menu and Control by
1 Search Controller

PTZ CTL
UP
LEFT RIGHT Control Camera PTZ &
DOWN Focus by Search
Controller on PTZ Menu
FOCUS/IRISCTL
UP
LEFT RIGHT
DOWN Search Controller

23
• Display

5. System Power OFF

• Press Power Button to System Off

• Input Password and Press Enter to Shutdown System

Tip
• System Log-On Possible ID : ‘Administrator’, ‘Manager’, ‘Operator’
Administrator: All Function Access (System On, Shutdown, Setup, Search)
Manager: System On and Search
Operator: System On

24
• SEARCH

⊙ Go to Search Mode
SEARCH • Press Search Button and Log-In
Administrator or Manager

• Use Direction Key to Move Menu

ENTER • To Open Each Menu Press Enter

1 or Press Play Button

Search Recorded Data RETURN • Return to Previous.

(Move to Previous Menu or Exit Search
1 Mode and Return to Watch Mode)

1. Search by Date/Time
- Possible to Search Recorded Date & Time

① Move Cursor to Selected Date in Calendar

(Recorded Date & Time Indicated by Gray Color)
② Press Enter to Open Selected Date
③ Recorded Time Appear to Under Side
④ Press Enter at Selected Time
(One Scale is 15 Minutes)
⑤ Menu Disappear and Output Recorded Video

• Showing Recorded Date & Time at Left-Upper Side

1 as Watch Mode.
1 Showing Playing Condition at Right-Under Side.
• Channel Selection Button in Watch Mode & SCR Mode
1 Button are Apply the Same as Search Mode.
(But Menu, Search, and PTZ/Focus Buttons are Exception) 2004/01/01
00:00:00 >

25
• SEARCH

• Control Playing Video

① : Basic Playing Mode (Normal Speed (1X) Forward Playing)

② : Normal Speed Backward Playing

③ : Pause Video

④ : Fast Forward (2 ~ 64 Speed)

⑤ : Fast Backward (2 ~ 64 Speed)

⑥ : Same Function as # ④,⑤

※ Press Normal Forward/Backward Button in Pause, Move to Next/Previous Frame.

2. Search by Event
- Searching Video with Event Occurrence to Set up Period

Set up Period to Select Start Date & Finish Date

for Searching Event

Alarm : Searching Alarm Event during the Selected

1 Period
Motion : Searching Motion Detected Event during
1 the Selected period .
Timer : Searching Schedule Change or Recording
1 Setup Change Event
System : Searching Power On/Off Event (etc.)
1 Concerned System Event
Event List Showing at Below Output Window

Tip • Alarm, Motion, System can be Select plural by Check (V)-(ENTER)

• To Change Setup, Press Enter and Press Direction Key
After Changing Setup, Press Enter to Exit.

26
• SEARCH

• Date : Indicate Event Occurrence Order & Date

Time : Indicate Event Occurrence Time
Event : Indicate Event Contents & Camera No.

• Event Searching Method

① User can Search Event Using by Direction key
② Search Event to Press Enter at Selected Event
from Event Occurrence Time
③ Control Video is the same way as Time Mode Control

Tip • The Search by Event is not Base on Video, but Event Occurrence Time.

27
• MENU

⊙ Go to Menu

① Press Menu Button on Front Panel in Watch Mode

② Ask Password
③ Input Password Using by Channel Select Button
1 [1][2][3][4])
④ After Input Password Press Enter to See Menu

Tip • Initial Administrator, User, Network Password is 1234.

• Showing Password as *
• Changing Password (MENU->6.System->4.Password )
• Only Watch Mode can go to Menu.
(Search & PTZ/Focus Mode can’t move to Menu)

⊙ Menu Initial

• Every System Setup can Change or Maintain

1 at Menu (6 Setup)

• Move to Menu Using by Up

& Down Button

• ENTER

To Open Detail Menu or to Apply Input

•
RETURN

Return to Previous Menu or Return to Watch Mode

28
• MENU

1.Display
- Video Setup for Watch Mode

1. Date/Time : Date & Time Mark On/Off

2. Title : Camera Name On/Off
3. Status : Record Condition Mark On/Off
(Recording: Red, Pre-recording : Green)
4. Border : Border Mark On/Off
when 4CH Division Watch Mode
5. Border Color : Select Border Color
(White, Blue, Red, Yellow, Green, Gray)
6. Sequence Dwell : Setup Rotation Cycle Time
(1~60 Sec.) when 4CH Rotation Mode at Watch Mode
7. Spot-Out Dwell : Setup Spot-Out Time Cycle
(1~60 Sec.) to Transmit Video
8. Deinterlace Mode : Remove Screen Spread on High
Resolution , Low Frame
※Only Applying When D1(704X480)

2.Record
- Setup Image Record

2.1 Size/Rec.Rate/Quality – Setup Recording Resolution, Compression Rate, Quality

-Camera : Indicate Camera No. to Setup

-Size : Setup Resolution
-Rec.Rate : Setup Compression Rate
-Quality : Setup Quality of Recording Video

29
• MENU

• Size : 352*240, 704*240, 704*480

Rec.Rate : Possible to Select (1~30)
Quality : Possible to Select 3 levels (High, Low, Standard)

• Indicate Frame No. to Control Size & Rec. Rate

• If Frame Over, Showing a Message ‘Overlimit Recording

Overlimit Recording Capacity 1 Capacity’ and Impossible to Change Size & Rec. Rate

Tip • When Setup Refer to Below NTSC, PAL Type

NTSC : 352*240(120fps), 704*240(60fps), 704*480(30fps)
PAL : 352*288(100fps), 704*288(50fps), 704*576(30fps)
• Possible to Setup Size & Rec. Rate, Quality per Each Channel
• When Applying Change Setup, Press Enter,
1 When Cancel Change Setup, Press Return.

2.2 Timer Recording Setup – Record On/Off or Time, Motion Setup

• Camera : Indicate Camera No. to Setup

• Record : Record On/Off
• Start : Setup Recording Start Time (0~24 hr)
• Stop : Setup Recording Finish Time (0~24 hr)
* Recording Time is between Start Time and Finish Time.
• Motion : Motion Detection Recording On/Off
(Record Setup must be ‘On’, when Motion Detection
1 Recording.)

30
• MENU
2.3 Motion Detection Setup – Motion Detection Area & Sensitivity

• Camera : Indicate Camera No. to Setup

• Sensitivity : Control Sensitivity (1~100)

Large No. is More Sensitive.

• Region : Setup Motion Detect Range

Entirely – Setup Entire Screen
Partially – Setup Partial Screen

• When Choose Region as Partially, Move to Partial

1 Range Setup. Press Enter After Partial Range Setup
1 to Finish Region Setup.
• Pre-Motion Duration : Setup Pre-Motion Duration Time.
1 (1~5 sec)
• Post-Motion Duration : Setup Motion Detect Recording
1 Time after Motion Detected (5sec~3min)

2.4 Alarm Recording Setup – Recording Setup for Alarm Activated

• Camera : Indicate Camera No. to Setup

• Record : Setup Record On/Off when Alarm Activated
• Start : Setup Alarm Recording Start Time (0~24 hr)
• Stop : Setup Alarm Recording Finish Time (0~24 hr)
• Pre-Alarm Duration : When Alarm Recording, Setup
1 Start Recording Time before Alarm Activate (1~5sec)
• Post-Alarm Duration : Setup Alarm Recording Time
1 after Alarm Activate (5sec~3min)

Tip • Motion Setup Work by Time Schedule and Alarm Schedule Work Independently.

31
• MENU

⊙ Time Recording Weekly Setup

① ②

Weekly mode Setup at Record Setup Scheduled Region Indicated Yellow

③ ④

After ‘Deselect’ Schedule, Activated Region by After Selecting Region and Press ‘ENTER’ Again
Press ‘ENTER’ and Select Date & Time to Move to Finish Schedule Setup (Red)
Cursor

⑤ ⑥

• Select All : Entire Region Select

Setup Date & Time Schedule in the Same Way.
• Deselect All : Cancel Region
After Finishing Schedule Setup,
Press ‘Return’ for Save & Exit • Save&Exit : Save Changing Setup & Exit
• Cancel : Cancel Changing Setup & Exit

32
 • MENU

⊙ Partial Motion Region Setup

:Non-Activate Move Cursor :Activate Partial Setup Cursor :Partial Setup Finish Cursor :Non-Activated Region

① ② ③

Region Initial View Move Cursor by Direction Key and Press Enter again to see
Press Enter at Selected Region Region as a Blue Color and
Setup Non-Activate Region

④ ⑤ ⑥

When Select Multi Region, Press Enter to Select Multi Same Method as ④⑤, Possible
Using Direction Key in ② to Non-Activate Region to Expand Non-Activated
Expand Non-Activate Region Region

⑦ ⑧
• Select All : Select Entire Region
• Deselect All : Cancel Region Setup
• Save&Exit : Save the Change Setup & Exit
• Cancel : Cancel Change Setup & Exit

For Reducing Partial Region,

When Finishing Partial
Cancel Non-Activate Region
Region Setup, Press Enter
in Same Way as ④⑤
to Save & Exit

33
• MENU

3.Camera
- Setup Camera

3.1 Status/Title Setup – Camera Connection Status & Camera Name Setup

• Camera : Indicate Camera No. to Setup

• Status : Indicate Camera Status
(Connected/Disconnected)

• Title : Setup Camera Name to Show Left-Upper Side

Tip • Title Input Method

Using Direction Key, Up & Down Keys for Alphabet A~Z, Numerical No. 0~9
1 Left-Right Keys for Move to another Letter.

3.2 Covert/PTZ Setup • Camera : Indicate Camera No. to Setup

• Covert : Setup Covert On/Off
*What’s Covert?
When Covert On Watch Mode, Display Video is 1
1 Hidden, but Recording is On.
• PTZ Address : Select PTZ Camera Address
• PTZ Protocol : Select Kind of PTZ Camera
• Baud Rate : Setup PTZ Communication Speed
(2400, 4800, 9600 BPS)
※PTZ Supplied Protocol :
Samsung(MRX-1000), HoneyWell(GC/GMC-755 Zoom)
Kalatel(KTD-312), Panasonic(WV-CS850),
Panasonic(WV-CSR604), PELCO-D, PELCO-P,
Sensormatic-ADPT8, Vicon(surveyor99), Sunin DSC-230
1 D-MAX , HoneyWell(GC-655N)

34
• MENU

3.3 Color Setup – Control Video Color

• Camera : Indicate Camera No. to Setup

• Bright : Control Monitor Bright
• Contrast : Control Monitor Contrast
• Color : Control Monitor Color
• Tint : Control Monitor Tint
* All Setup Possible to Control 0~100

4.Audio
- Setup Audio

4.1 Audio Recording Setup – Audio In Setup

• Camera : Indicate Camera No. for Setup

• Audio Rec. : Setup Recording On/Off from External
1 Audio In Terminal
• Audio Ch. : Setup Audio In Terminal Channel &
1 Audio Output Camera

Tip • User can Listen Saved Audio with Saved Video

• Audio Check in Search is Possible Only Normal Speed (1X) Forward
1 Playing at 1CH Mode (Audio Recorded Channel)

35
• MENU

4.2 Live Audio Setup – Audio Out Setup

• Live Audio : Audio Output ON/OFF

Live Audio Output from Audio In Terminal
• Monitoring Ch. : Select Channel for Audio Output
1 Nr. 1~4 Audio In

5.Alarm
- Setup Alarm & Relay

5.1 Alarm Input Setup – Alarm Sensor Setup

• Alarm : Indicate Alarm Input Terminal No.

• Status : Setup Alarm Sensor Connection Status
(Connected/Disconnected)

• Camera : Input Camera No.1~4 to Connect Alarm

• Type : Setup Alarm Sensor N/Open, N/Close Type

Tip • Generally Alarm Sensor can be Divided Two Types.

Normal Open Type is Open Sensor Electrically and Reacted when
1 Signal is Connected.
Normal Close Type is Close Sensor Electrically and Reacted when
1 Signal is Disconnected.

36
• MENU
5.2 Relay Output Setup – Alarm Relay Setup

• Alarm : Indicate Alarm Input Terminal No.

• Relay Out : Setup Relay Connect with Alarm Sensor
• Mode : Setup Reacted Relay as Latched/Transparent Mode
• Duration : Setup Reacted Relay Time
1 (5sec~5min or Until key-in)
• Relay Type : Setup Relay Type N/Open or N/Close

Tip • Latched/Transparent
Latched – When Sensor Alarm Activated, Relay Reacted in Setup Duration
Transparent – Relay Reacted Temporary During Sensor Alarm Activate

6.System
- Basic Environment Setup
6.1 Date/Time – Date & Time Setup

• Date : Setup Present Date (YYYY-MM-DD).

(If Time Setup to Past Date, Ask Delete Data for the Past Date.
NO->Date/Time No Change, YES->After Delete Past Data and Change Date/Time )
• Date Format : Select Date Output Type (Ex: 2004-00-00, 2004/00/00)
• Time : Setup Present Time
• Time Format : Setup Time Type as 12 Hour Base or 24 Hour Base
• Daylight Saving : Summer Time Applying Status

37
• MENU
6.2 Network – Setup TCP/IP

• IP Address : Input IP Address

• Gateway : Input Gateway IP for Internet Server
• Subnet Mask : Input Subnet Mask IP
• Network Speed : Setup Network Speed
(Network Speed from System, Depend on Network Status)
※ If Change Network Setup, New Change Apply
when after Rebooting.

6.3 Buzzer Setup – Setup Key Sound to Speaker

• Alarm Input : Alarm On/Off when Alarm Activate

• Videoloss : Alarm On/Off when Camera Disconnected
• Disk Full : Alarm On/Off when Hard Disk Full
• Disk Error : Alarm On when Hard Disk Error
• Key Input : Setup Key Input Sound

6.4 Password – Setup Password

6.4.1 Administrator Password – Setup Menu & System On/Off

• Current Password : Input Current Password (Initial Password : 1234)

• New Password : Input New Password
• Re-enter the Password : Re-Confirm New Password
• Save&Exit : Applying New Password

38
• MENU

6.4.2 Manager Password – Possible System On & Search, But Can’t Change Setup

• Current Password : Input Current Password

(Initial Password : 1234)
• New Password : Input New Password
• Re-enter the Password : Re-Confirm New Password
• Save&Exit : Applying New Password

6.4.3 Operator Password – Possible System On, But Can’t Change Setup and Search

• Current Password : Input Current Password

(Initial Password : 1234)
• New Password : Input New Password
• Re-enter the Password : Re-Confirm New Password
• Save&Exit : Applying New Password

39
• MENU

6.5 Disk Write Mode – Setup Hard Disk

• Disk Overwrite : Select Overwrite Permission when

1 Hard Disk Full
O N: Overwrite Hard Disk from Oldest Data
OFF: When Hard Disk Full, Stop Recording and
1 Buzzer Activate (Refer to Menu 6.3 Buzzer Setup)

• Disk Initialize Now : Refreshment Hard Disk

All Recorded Data Deleted

• When Select Disk Initialize, Alarm Message Showing.

1 Select ‘Yes’ to Start Disk Initialize.

※When Change Disk Overwrite ON/OFF Mode, the Change will be Applied from Changing Time.
For Example When Overwrite On Mode & HDD Full, Change to Overwrite Off Mode and then it will be Applied New Data
Fill HDD Full after Changing Time.

6.6 System Information – Product information (Version etc)

• S/W Version : Indicate S/W Version of the Product

• H/W Version : Indicate H/W Version of the Product
• Video Signal Type : Indicate Video Signal Type
• Disk Size : Indicate Hard Disk Capacity
• Number of HDD : Indicate Present Installed HDD No.
• IP Address
• MAC Address

6.7 Factory Default – Every Setup Initializing

• Press Enter to Start Initialize

• Showing Warning Message and Press OK to Run Initialize
• If do Factory Default, Every Setup is Initialized, but
1 Saving Image is Not Erase.

40
• CLIENT

• System Requirement

① Main Board (CPU): Celeron 500-700(Minimum), Pentium 4 recommend

② OS: Higher than Windows 98,DirectX 7.0A
③ Memory (RAM): More than 128 M
④ VGA: Overlay YV12 Format Graphic Card
All Radeon, Nvidia (Higher than Geforce) Matrox (Higher than G400) Compatible Video Card
※ Higher than DIVX Codec 5.1, IMM4 Codec (When Playback Backup File)

• DVR Remote Agent 1.0 Install

① Open CD-ROM Drive and Run DvrRemoteAgentSetup.exe and then Appear Setup Menu

② Close All Running Software and Press Next to Move Next Step

41
• CLIENT

③ Ask designate Folder to Install DvrRemoteAgent 1.0,

Recommend Basic setup c:₩program files:₩DvrRemote Agent 1.0
Click Next

④ Showing Progress of Copy of Files

⑤ Appear DirectX 7.0a Install Menu. If DirectX Version Lower than 7.0a, Press Yes to Start Install

42
• CLIENT

⑥ When Finishing Installation, System must be Restarted. Click ‘Yes’

⑦ Finish DvrRemoteAgent 1.0 Program Installation

43
• CLIENT

1. Monitoring Mode

1.1 Function Introduction

③

①
④

⑪
②
⑫
⑬

① Main Screen Image : Showing Present Surveillance Camera Image

② Camera Selection Button : Indicate Connected Camera No. & Select Image to Click Camera No.
③ Hidden/Exit : Hide DVR Client Window or Exit Program
④ Time Output : Showing Present Time & Date
⑤ SEARCH : Move to Search Mode to Play Video
SETUP : Move to Setup to Change Network Setup or Option
⑥ I/D Selection : Select I/D to Connect Server
⑦ Connect : Connect Server
Disconnect : Disconnect from Server
⑧ Screen Division Selection : Change Screen Division Mode
⑨ Save by AVI file : Transmission Live Image Save by AVI File
⑩ Color Adjustment : Adjust Color of Live Transmission Image
⑪ PTZ Control Button : Control Camera PTZ & Focus
⑫ Audio Button : Control Two Way Audio & Mute
⑬ Exit : Exit DVR Client

44
• CLIENT

1.2 Screen Division Selection

• 1*1 View : Showing One (1) Video which User Selected

(Selection Video by Camera Selection Button)
• 4*4 View : Quad Screen Division Mode

• Scenario View : One Large Screen Mode Showing One by One (1*1 View)
1 Depend on User Selection Time (Not Work Screen Division Mode)

• Full Screen View : Present Video Move to Full Screen Mode

Mouse Double Click when Return Previous

*Mouse Double Click Make the Same Function as Full Screen.

1.3 P/T/Z Control

• P/T/Z Controller : Camera P/T/Z Control by Direction Keys

• FOCUS/ZOOM Select Button : Focus or Zoom Control by +,- Button

• +,- Control Button : Focus or Zoom Control

1.4 Selection Network I/D

Network Information Icon

• Select I/D to Connect Server. • Click Network Information Icon, to See a

• I/D can be Add, Change, and Delete at Setup 1 Popup Window for Connected Server I/D,
1 IP, and Port Information.

45
• CLIENT

1.5 AVI File Conversion

• Click AVI Conversion Button to Start AVI File Conversion.

• During AVI Conversion Showing a Message and before
1 Click ‘Stop” Save AVI File continuously .

• ‘Press ‘Stop’ to Open Designate File Name

1 & Saving Location, and Save AVI File.
• Saved AVI File can Open Ordinary Moving
1 Picture Player or Backup Player.
• Moving Picture Player Codec Version Need
1 Higher than Divx 5.1 & IMM4 Codec.

1.6 Color Adjustment

• Click Controller Possible to Control Color

• Change Brightness, Contrast, Saturation from 0 to 100
• Click OK to Finish Changing Setup

1.7 Audio

• Two Way Audio : During Press Mouse, Possible to Two-Way Communicate

1 Between DVR Server & Remote Client.
(Transmission Remote Audio to DVR Server.)
* Only Possible when Connected Administrator ID.
• Mute : Mute Remote Audio Volume.

46
• CLIENT

2.Search Mode

2.1 Function Introduction

②
⑧

① Search Screen : Playing Selected Video

② Search Bar : Search & Indicate Camera Recording Situation by Time Bar
③ LIVE : Return to Watch Mode
SETUP : Open Setup to Change Network Setup or Option
④ Screen Division Selection : Change Playing Screen Division Mode
⑤ SEARCH Option : Backup Video or Search Event
⑥ Camera Selection Button : Select Camera at the 1*1 View
⑦ Quick Search : Find Image to Designate Date & Time
⑧ Search Controller : Control Playing Video

47
• CLIENT

2.2 Search Method

① ⑤

② ③ ④ ⑥

① Indicate 0~24 Hour

② Indicate Recording Situation (Blue : No Record, Yellow : Recorded Image at the Time)
③ Search Bar : Select Video to Drag Mouse Search Controller in Recorded Area
④ Indicate Camera Channel to Confirm Camera Recording Situation
⑤ Refreshment Recording Information Situation Window by Camera Channel
⑥ If Connected Channel is 5 or More, Another Channel will be Scroll.

Click Date Setup and

Select Date on Calendar

Search Bar will Move,

if Input Date & Time
Play Video as Normal
Speed (1X)

Stop Play Video

Program Exit

48
• CLIENT

2.3 SEARCH Option

③Save Image

①Backup ⑤Log Search

②Backup Play ⑥Event Viewer

④Print Image

① Backup – Backup Image from Server to Remote PC

• Backup Time : Designate Backup Time (Now or Later)

• Designate Backup Date & Time when Later

• Source :

Designate Backup Image Data Length to

1 Input Start Time & End Time.

• Channel : Check Camera Channel for Backup

• Include Audio : Check Audio Including when Backup

• Select All
Deselect All

• Press OK to Open Backup Status & Start Backup.

• When Finish Backup, Back Status Window Disappear & Backup Data Save at Hard Disk
1 Root Folder in Remote PC.

49
• CLIENT

② Backup Play (DVR Player) – Transfer to DVR Player

②
④ ③

① Showing Image (Possible to Only 1*1View Mode)

② Backup File Open to Play First Video
Ex. : ch02_04131730_04131735.rec ( Backup File for # 2 ch. Apr.13, 17H30M ~17H35M )
③ Indicate Present Playing Video Camera Channel No.

④ Indicate Present Time & Date and Possible to Search Time & Date
⑤ Search Controller, the Same Way of Previous Search

Tip • Backup Play Setup in Search Mode is the Same as DVR Player, 1
1 so it can be Run Independently without Running Remote Program.
• Backup Player & Ordinary Moving Picture Player Possible to Playback,
1 Real Time AVI Backup File can Display as the Same Format.

50
• CLIENT

③ Save Image – Capture Image & Saving Image at Hard Disk or Removable Disk

• Click ‘Save Image’ Icon During Playing Video

• Designate File name, File Type (JPG,BMP), and Location and Press Saving
• Conversion and Saving Image from Remote Viewer

③ Print Image – Present Image Capture and Print Out Image

• During Play Video, Click ‘Print Image’

• After Selecting Printer, Start Image Printing
• Print Out Remote Viewer Image

51
• CLIENT

③ Log Search – Find Video Centering around Event Log at Server

② ③ ④ ⑤

⑥ ⑧ ⑦ ⑨ ⑩

① Input Start Time and End Time at the Selected Date to Search Event
When Press Search Button, Event Output at the Below Window
② Indicate Event Log Order No. ( Max Event Log No. of 1 Page is 100 )
③ Indicate Event Occurred Camera No.
④ Indicate Event Occurred Time & Date
⑤ Indicate Event Detail Description
⑥ Move to Previous Page
⑦ Move to Next Page
⑧ Move to User Select Page
⑨ After Select Event, Move Search Bar in Search Mode
⑩ Return to Search Main to Play Event Image

52
• CLIENT

④ Event Viewer – Showing Present Event in Server & Find Image

① Indicate Event Occurred Order No.

② Indicate Event Occurred Camera No.
③ Indicate Event Occurred Time & Date
④ Indicate Event Detail Description
⑤ After Select Event, Move Search Bar
1 in Search Mode
⑥ Return to Search Main to Play
1 Selected Event Image

① ② ③ ④

⑤ ⑥

53
• CLIENT

3. Setting

①
②
③
④
⑤
⑥

⑦ ⑧ ⑨ ⑩
⑪

3.1 Connection ID Setup

① ID Status : Indicate Present Saving ID & ID Information.

② Input Name to Add or Amend ID.
③ Input Server IP Address to Add or Amend.
④ Indicate Port No.
⑤ Input ID for Connecting Server.
⑥ Input Password for Connecting Server.
⑦ Click to Input New ID Information.
⑧ After Input All ID Information, Add ID Information at ID Status.
⑨ After Amend All ID Information, Applying Change ID Information.
⑩ Selected ID Delete at ID Status.
⑪ Option : Each Option Setup Change
⑫ System Setup : Setup DVR Server from Remote Client, Only Possible when Connected Administrator

Tip
• When Change DVR Setup at the Remote Client, DVR Server Setup must be
1 Non-Activated.
• Administrator ID Max 1, Connectable No of People Max 4
1 (Including Manager, Operator, and Web-Client).

54
• CLIENT

3.2 Option Setting

① ④

② ⑤
③

① Receive Event : Select Kinds of Event as Multiple. Remote Client Only Receive Selected Event.
(System, HDD, Alarm, Video, REC)
② Screen Switching Interval (sec) : During the Monitoring, Select Screen Rotation Interval Time
(From 1 sec. to 300 sec.)
③ Live Audio Monitoring Channel : Select Channel for Listening Audio at Remote Among 4Ch Audio.
④ OSD Display : Select Screen Information Display.
(Name, Date, Resolution)
⑤ Saving Directory : Designate Remote PC Backup Image Saving Folder.

3.3 DVR Server Remote Setup

• Click DVR System Setup Tap, Password Input Window Open

After Input Password, Setup Window Pop-up.
• DVR System Tap Indicated Only when Connect as Administrator.
• DVR System Setup Possible to Control Almost Every Setup at the Remote.
• When Activate Setup or Changing Setup at the DVR Server,
1 It’s Impossible to Change Setup at the Remote.
• During System Setup at the Remote, DVR Server Setup Start Make to
1 Close Remote System Setup Automatically.

Tip • Remote Connection ID Authority

Administrator : All Authority for Remote & Possible to Change DVR System Setup
Manager : All Authority for Remote, But Impossible to Change DVR System Setup
Operator : Monitoring & Setup For Live Screen
Web Client : Only Live Image Monitoring
• Max. 4 People Connection Including Every ID, Administrator ID Supply Only One.

55
• CLIENT

① Record Setup

• Record Size/Rate/Quality Setup

- Setup Each Channel
1 Resolution & Compression Rate.
• Timer Recording Setup
- Setup Time Schedule for Each Channel.
• Alarm Recording Setup
- Setup for Alarm Recording.
• Motion Detection Setup
- Setup for Motion Detection Recording.

② Camera Setup

• Status/Title Setup
- Setup for Each Camera
(Connection Status or Camera Name).
• Color Setup
- Setup Color for Each Screen.
• Covert/PTZ Setup
- Setup Each Camera Covert
1 Function & PTZ Protocol.

Tip • Refer to DVR Server Setup for Each Setup Detail.

56
• CLIENT
③ Audio Setup

• Audio Recording Setup

- Setup for Each Channel Audio Recording.
• Live Audio Setup
- Live Audio & Two Way Audio Setup for Server.

④ Alarm Setup

• Alarm Input Setup

- Setup for Each Channel
1 Alarm Connection & Type.
• Relay Output Setup
- Setup for Each Channel
1 Relay Connection & Mode.

⑤ System Setup

• System Info
- Possible to Watch DVR Server
1 System Status.
• Buzzer Setup
- Setup DVR Buzzer Sound On/Off.
• Password Setup
- Change Password for
1 Administrator, Manager, Operator.
• Disk Write Mode
- Setup DVR HDD Overwrite On/Off.
• Connection Status
- Indicate Currently Connected All
1 Remote Client Connection Status.

57
• CLIENT

4.WEB Client

• WEB Client Connection

① Input IP Address for DVR Server at the Internet Explorer Address Input Place.
② When Appear Active-X Warning Message, Please Click Confirm or Continue.

③ Showing Web Client Window at Internet Explorer.

④
Click Connection Button and Pop-up ‘Log In’ Window.

58
• CLIENT

⑤ IP Address (or URL) : Input DVR Server IP or URL Address

Port : DVR Client Connection Port is 6100
ID : Select ID (Administrator, Manager, Operator).
(No Difference Authority on Web Client.)
Password : Input Password.

⑥ Only Possible to Monitoring Live Video As soon as Connection.

59
• Supplement – PTZ CONTROL

1. PTZ Control
• Press PTZ/FOCUS Button to Open PTZ Menu at Right-Under Side and Control by
1 Search Controller

PTZ/FOCUS
• When Press PTZ/FOCUS Button by Turns, Focus/Iris, Preset, Swing Menu will
1 Appear at the Right-Under Side and possible to Control by Search Controller.

PTZ CTL
UP
LEFT RIGHT
DOWN
Fast Backward Play Fast
FOCUS/IRISCTL Backward Play Forward
UP
LEFT RIGHT
DOWN Search Controller

PRESET
NUMBER:1
NUMBER CHANGE:UP/DOWN
SET:F1 GOTO:F2

SWING
MODE:PAN SWING
NUMBER CHANGE:UP/DOWN
FIELD CHANGE:LEFT/RIGHT
SET:F1 RUN:F2

1.1 PTZ Control

① Control Camera Movement by ‘Faster’, ‘Slower’, ‘Backward Play’, ‘Play’ Button (Up,Down.Left,Right).
② Zoom In & Out by ‘Fast Backward’, ‘Fast Forward’ Button.
③ Keep Press Button Make Continuous Movement.

1.2 FOCUS/IRIS Control

① Control Iris by ‘Faster’, ‘Slower’ Button.

② Focus On by ‘Backward Play’, ‘Play’ Button.
③ Zoom In & Out by ‘Fast Backward’, ‘Fast Forward’ Button.
④ Keep Press Button Make Continuous Movement.

60
• Supplement – PTZ CONTROL

1.3 PRESET Control

PRESET ① By Preset Function, Possible to Setup Direction and Focus of PTZ Camera.
NUMBER:1
NUMBER CHANGE:UP/DOWN ② After Selecting Position at PTZ Control Mode, Save Data at Preset Mode.
SET:F1 GOTO:F2
③ Setup ‘NUMBER’ from 1 to 128 by ‘Faster’ & ‘Slower’ Button.

④ Save by Front Panel Key No.1 Button or F1 Button on Remote Controller.

⑤ To Move to Saved Location, Press Front Panel Key Button No.2 or F2 Button on Remote Controller.

1.4 SWING Control

① SWING Function Dedicate Each No. of Saved Preset and Swing as Pan or
SWING Tilt.
MODE:PAN SWING
NUMBER CHANGE:UP/DOWN ② Changing Mode by Backward Play Button.
FIELD CHANGE:LEFT/RIGHT
SET:F1 RUN:F2 Changing Setup by Faster, Slower Button.

③ PAN SWING MODE : Rotate Left , Right Side.

TILT SWING MODE : Rotate Up, Down Side.
START PRESET : Select Starting Point. (1~128)
END PRESET : Select End Point. (1~128)
SWING TIME : Select Halt Time as Each Point. (1~64sec)
SWING SPEED : Select Moving Speed of Camera. (1~64)

④ Save by Front Panel Key No. 1 Button or F1 Button on Remote Controller.

⑤ For Start SWING Mode, Press Front Panel Key No.2 or F2 Button on Remote Controller.

61
• Supplement – Duplex Audio

2. Two Way Audio

One-way Two-way

① Enter ‘4.Audio -> 4.2 Live Audio Setup’ at the Menu.

② Select ‘One-way’ or ‘Two-way’ at the Network Audio.
③ One Way : Transfer Audio from DVR to Remote Client.
Remote Client Possible to Receive Audio with Video.
④ Two Way : Communicate Audio between DVR and Remote Client.
Remote Client Possible to Receive & Send Audio to DVR Server.
⑤ Network Audio Possible to Operate even Live Audio Off.

62
• Supplement – DHCP

3. DHCP

DHCP Off DHCP On

① Enter to ‘6.System -> 6.2 Network’ on the Menu.

② Setup DHCP On/Off.
③ DHCP Off : User Input IP Address by Himself.
④ DHCP On : After DHCP On, Reboot the System.
※ DHCP (Dynamic Host Configuration Protocol) : Indicate IP Address for the DVR Automatically.

Possible to Confirm IP Address for the DVR

at the System Information.

63