Scribd
Upload
174 views2 pages

Touch Screen Numerical Control: SIAX A100

The SIAX A100 is a numerical control system that can control up to 4 axes of motion with motors producing 0.33 to 68 Nm of torque. It has options for CAN-Open or Ethercat communication and features a 7-inch touch screen, Ethernet and USB ports, serial interfaces, 64MB RAM and Flash storage, and 18Vac or 24Vdc power supply. The software can manage axes, configurable S-curves, axis tracking, electronic cams, packaging functions, and includes a programmable interface, external testing, remote assistance, and PLC functionality.

Uploaded by

Mounir Belala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
174 views2 pages

Touch Screen Numerical Control: SIAX A100

The SIAX A100 is a numerical control system that can control up to 4 axes of motion with motors producing 0.33 to 68 Nm of torque. It has options for CAN-Open or Ethercat communication and features a 7-inch touch screen, Ethernet and USB ports, serial interfaces, 64MB RAM and Flash storage, and 18Vac or 24Vdc power supply. The software can manage axes, configurable S-curves, axis tracking, electronic cams, packaging functions, and includes a programmable interface, external testing, remote assistance, and PLC functionality.

Uploaded by

Mounir Belala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Touch Screen

Numerical Control

SIAX A100
Can-Open Can-Open

or Ethercat or Ethercat

MAX 512 IN + 512 OUT - INPUT 24Vdc - OUTPUT 24Vdc/2A


Motors RELAY OUTPUT - 8 ANALOG INPUT - 4 ANALOG OUTPUT
from 0.33 to 68 Nm Up to 4 Axes

Hardware Optional
ýý Display: LCD TFT 7” WIDE 262.000 colori ýý 16 ingressi digitali 24Vdc e
Risoluzione 800 x 480 - Touch Screen. 16 uscite digitali 24Vdc / 2A a bordo.
ýý 1 Porta Ethernet per collegamento TCP-IP. ýý 2 Linee CAN-OPEN.
ýý 1 Porta USB. ýý 1 Porta Ethernet con protocollo Ethercat.
ýý 3 Linee seriali RS232 (1 configurabile RS422/485). ýý 4 Ingressi interrupt 24Vdc.
ýý Memoria utente: 64 MByte RAM e 64 MByte Flash. ýý 4 Letture encoder incrementali 5/12V
ýý Alimentazione: 18Vac oppure 24Vdc. Push Pull - Line Driver - 500 KHz.
ýý Dimensioni: L 208 mm - H 135 mm - P 49 mm. ýý 4 Uscite analogiche 16 bit ±10V.
ýý 2 Ingressi analogici 12 bit 0÷5V / 0÷10V / 4÷20mA.
• Display: LCD TFT 7” WIDE 262.000 colors
Resolution 800 x 480 - Touch Screen. • 16 digital input 24Vdc and
• 1 Ethernet line for TCP-IP connection. 16 digital output 24Vdc / 2A on board.
• 1 USB line. • 2 CAN-OPEN lines.
• 3 RS232 serial lines (or 2 RS232 + 1 RS422/485). • 1 Ethernet line with Ethercat protocol.
• User memory: 64 MByte RAM and 64 MByte Flash. • 4 Interrupt input 24Vdc.
• Power supply: 18Vac or 24Vdc. • 4 Incremental encoder input 5/12V
• Dimensions: W 208 mm - H 135 mm - D 49 mm. Push Pull - Line Driver - 500 KHz.
• 4 Analog output 16 bit ±10V.
• 2 Analog input 12 bit 0÷5V / 0÷10V / 4÷20mA.
Software
ýý Gestione fino a 4 assi.
ýý Curve a “S” configurabili.
ýý Inseguimento tra assi.
ýý Gestione camme.
ýý Funzioni packaging.
ýý Interfaccia grafica programmabile.
ýý Test completi verso il mondo esterno.
ýý Teleassistenza.
ýý PLC IEC 61131.

• Up to 4 axes.
• Configurable “S” curves.
• Axis tracking functions.
• Electronic cams.
• Packaging functions.
• Programmable graphic interface.
• Complete external loopback testing.
• Remote assistance.
• PLC IEC 61131.

Sipro S.r.l. Sistemi Programmabili


Viale dell’Industria, 7 - 37135 Verona (Italy)
tel. +39 (0)45 50 88 22 r.a - fax +39 (0)45 58 54 77 Solutions in motion.
[email protected] - www.sipro.vr.it

You might also like