Scribd
Upload
76 views3 pages

Short Name: FD.S : DW DN D D S PN

The document describes rubber coated steel gaskets with EPDM or NBR material. It provides a technical product sheet listing various diameter and pressure class options. Key details include vulcanized rubber and steel ring construction, temperature and pressure ratings, and material approvals. Advantages noted are sealing ability, shape stability, and corrosion protection from the steel core.

Uploaded by

Dinh Nguyen Dao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
76 views3 pages

Short Name: FD.S : DW DN D D S PN

The document describes rubber coated steel gaskets with EPDM or NBR material. It provides a technical product sheet listing various diameter and pressure class options. Key details include vulcanized rubber and steel ring construction, temperature and pressure ratings, and material approvals. Advantages noted are sealing ability, shape stability, and corrosion protection from the steel core.

Uploaded by

Dinh Nguyen Dao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

rubber coated steel gasket short name: FD.

S*
DIN 2690/ EN 1514-1 type IBC

technical product sheet

DW DN D d S PN
EPDM 15 50 22 4,0 10-40
EPDM 20 60 28 4,0 10-40
EPDM 25 70 35 4,0 10/16
EPDM 32 82 43 4,0 10/16
EPDM 40 92 49 4,0 10/16
EPDM 50 107 61 4,0 10/16
EPDM 65 127 77 4,0 10/16
EPDM 80 142 90 4,0 10/16
EPDM 100 162 115 5,0 10/16
EPDM 125 192 141 5,0 10/16
EPDM 150 224 169 5,0 10/16
EPDM 200 273 220 6,0 10/16
EPDM 250 328 274 6,0 10
EPDM 300 378 324 6,0 10
EPDM 350 438 356 6,0 10
EPDM 400 489 407 7,0 10
EPDM 450 539 458 7,0 10
EPDM 500 594 508 7,0 10
EPDM 600 695 610 7,0 10
EPDM 700 810 720 8,0 10
EPDM 800 917 813 8,0 10
NBR 15 50 22 4,0 10/16
NBR 20 60 28 4,0 10/16
NBR 25 70 35 4,0 10/16
NBR 32 82 43 4,0 10/16
NBR 40 92 49 4,0 10/16
NBR 50 107 61 4,0 10/16
NBR 65 127 77 4,0 10/16
NBR 80 142 90 4,0 10/16
NBR 100 162 115 5,0 10/16
NBR 125 192 141 5,0 10/16
NBR 150 218 169 5,0 10/16
NBR 200 273 220 6,0 10/16
NBR 250 328 274 6,0 10
NBR 300 378 324 6,0 10
NBR 350 438 356 6,0 10
created 21.05.2022 02:06 1/3
DW DN D d S PN
NBR 400 489 407 7,0 10
NBR 450 539 458 7,0 10
NBR 500 594 508 7,0 10
NBR 600 695 610 7,0 10
NBR 700 810 720 8,0 10
NBR 800 917 813 8,0 10
NBR 900 1015 920 8,0 10

available material: St 37.0/ P235TR1

Flanges › other › gaskets › rubber steel

created 21.05.2022 02:06 2/3


Version

Vulcanized rubber seal shaped like a lens, rounded corners, self-centeringsteel ring vulcanized
in rubber that is enclosed on all sides by the selected elastomer and is therefore fully protected
against corrosion and media.

Advantages

• Small leakage values for uneven surfaces due to the smoothing effect of the elastomer
• Even at low torque values, relatively small leakage rates are achieved
• Simple handling, especially in comparison to non-reinforced rubber seals
• High shape stability and prevents from being pressed out due to the steel core

Materials

Elastomer Temperature range Approvals Shore/ Hardness


EPDM -30°C to +120 °C TA-air, KTW, FDA 70 (+/-5)
NBR -25°C to + 70°C TA-air, DVGW, KTW, FDA 80 (+/-5)
FPM (Viton) -20°C to + 200°C TA-air 75 (+/-5)

Pressure
max. 25 bar (depending on nominal width)

The technical data are only guidelines and not assured properties.
Please contact us when in doubt.

created 21.05.2022 02:06 3/3

You might also like