Scribd
Upload
66 views1 page

Soil Pressure Determination For Irregular Footing: Input Data & Analysis Results

This document summarizes the soil pressure determination and analysis results for an irregular footing. It provides the input data including the footing edge points and reaction pressures, column locations and base loads, and wall locations and uniform loads. The maximum soil pressure is 215 psf at point 2. Key results of the analysis include the footing area, centroid and center of gravity locations, moments of inertia, and notes on assumptions made in the analysis.

Uploaded by

Jorge Felix
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
66 views1 page

Soil Pressure Determination For Irregular Footing: Input Data & Analysis Results

This document summarizes the soil pressure determination and analysis results for an irregular footing. It provides the input data including the footing edge points and reaction pressures, column locations and base loads, and wall locations and uniform loads. The maximum soil pressure is 215 psf at point 2. Key results of the analysis include the footing area, centroid and center of gravity locations, moments of inertia, and notes on assumptions made in the analysis.

Uploaded by

Jorge Felix
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECT : PAGE :

CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Soil Pressure Determination for Irregular Footing

INPUT DATA & ANALYSIS RESULTS


FOOTING EDGE POINT & REACTION PRESSURE COLUMN LOCATION & BASE LOAD
EDGE X Y R COL. X Y P Mx My
POINT (ft) (ft) (psf) NO. (ft) (ft) (kips) (ft-k) (ft-k)
1 0 0 47 1 9.33 4.47 10.6
2 0 21.5 215 2 13 4.47 20
3 38 21.5 196 3 25 4.47 20
4 38 0 28 4 28.67 4.47 10.6
5 17.6 10.5 7
6 21.2 10.5 7
7 9.33 19.73 20
8 16 19.73 20
9 25 19.73 10.6
10 28.67 19.73 20

WALL LOCATION & UNIFORM LOAD


WALL START END w
NO. X (ft) Y (ft) X (ft) Y (ft) (k/ft)

NET PRESSURE OF FOOTING SELF WEIGHT = 0.3 k/ft2

THE MAXIMUM SOIL PRESSURE 215 psf @ POINT 2

ANALYSIS

Footing Area
A= -817.0 ft2
Qmax
Centroid of Footing (COF)
Xc = 19.0 ft
Yc = 10.8 ft

Center of Gravity (COG)


Xg = 19.0 ft
Yg = 8.3 ft
SP = -99.3 kips
COF
Moment of Inertia
COG
Ixc = 31472 ft4
Iyc = 98312 ft4

Moment of Inertia for Principle Axes


Iu = 31472 ft4
Iv = 98312 ft4
q= 0.00 deg

Notes: 1. Assume that the footing is rigid without any deformation.


2. The footing self pressure should be net pressure, (0.15 kcf - 0.11 kcf) (Thk.), to check allowable soil capacity.
3. Use two end columns, uplift & download, to input the shear wall bending load.
4. To design concrete, may use 1.5 time section forces of ADS level.

You might also like