CLIENT MAERSK OLIE OG GAS AS

VALVE DATA SHEET PROJECT HALFDAN PHASE III DEVELOPMENT

SITE DANISH SECTOR (NORTH SEA)

UNIT HALFDAN A PLATFORM

1 MANUFACTURER: IV VALVES SERVICE: SOUR PROCESS & UTILITY (SEA WATER) & FIRE WATER
2 QUANTITY : AS PER MTO DOC NO. HDA-PI-BM-008 LOCATION: OFFSHORE - NORTHSEA
3 VALVE SIZE : MINIMUM 2" MAXIMUM 24"
4 DESIGN REQUIREMENTS
5 VALVE RATING : ASME CLASS 150
6 DESIGN TEMPERATURE RANGE : -10°C TO 93°C
7 END STYLE : WAFER TYPE (NON-LUGGED DESIGN) TO BE
8 INSTALLED BETWEEN ASME B16.5 RF FLANGES
9 PIPING CLASS : AM,AN
10 BORE : MANUFACTURER'S STANDARD
11 FACE TO FACE STANDARD : API 609
12 DESIGN/CONSTRUCTION : API 609
13 WAFER TYPE, SEAT TO SUIT SEA WATER SERVICE
14 CONCENTRIC SEAT (CATERGORY-A OF API 609)
15 ANTI STATIC ; FIRE SAFE DESIGN
16
17 MATERIAL REQUIREMENT
18 BODY : CAST - ASTM A744 GR. CK-3MCu.N
19 DISC : CAST - ASTM A744 GR. CK-3MCu.N
20 SHAFT / DISC SCREWS : UNS S32760
21 SEAT RING : NBR
22 STEM SEALS / PACKING : MANUFACTURER'S STANDARD FOR INTENDED SERVICE
23 OPERATOR : LEVER : 8" AND BELOW
24 : GEAR BOX WITH HANDWHEEL : 10" AND ABOVE
25
26
27 SUPPLEMENTARY REQUIREMENTS:
28 PROTECTION
29 FIRE SAFE (API 6FA / API 607 OR BS 6755 PART-2) : N/A
30 PAINTING (as per valve specification) : FOR GEAR BOX ONLY
31 SPECIAL REQUIREMENTS : NACE MR-01-75
32 CERTIFICATION REQUIREMENTS : EN 10204-3.1B
33
34 INSPECTION AND TESTING REQUIREMENTS
35 TYPE OF INSPECTION REQUIRED INSPECTION AND TESTING NOTES
36 VISUAL EXAMINATION (NOTE A) 100% A WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
37 MAGNETIC PARTICLE EXAMINATION NONE CONCERN LPI EXAMINATION SHALL BE PERFORMED AS PER
38 LIQUID PENETRANT EXAMINATION (NOTE A) NONE VALVE SPECIFICATION HDY-PI-SP-002.
39 RADIOGRAPHIC EXAMINATION NONE B TEST PRESSURE SHALL BE IN ACCORDANCE WITH ASME B 16.34
40 AND VALVE INSPECTION AND TESTING PROCEDURE SHALL BE IN
41 PRESSURE TEST (NOTE B) REQ'D ACCORDANCE WITH API 598 / BS 6755, PART-1. TEST DURATION
42 AND ACCEPTANCE CRITERIA SHALL BE IN ACCORDANCE WITH
43 VALVE SPECIFICATION NO. HDY-PI-SP-002.
44 NOTES
45 1 IN ADDITION TO NAME PLATE, VALVE SHALL BE SUPPLIED WITH A STAINLESS STEEL TAG STAMPED VAM 8W SECURELY
46 FIXED TO THE VALVE WITH NON-CORROSIVE WIRE.
47
48
49
50
51
52
THIS DATA SHEET SHALL BE READ IN CONJUNCTION WITH VALVE SPECIFICATION NO. HDY-PI-SP-002

VALVE TAG VAM 8W

VALVE TYPE BUTTERFLY
DOCUMENT No REV. SHEET
REV DATE DESCRIPTION BY CHKD APPD HDY-PI-DS-004.19 0 1 OF 1
 CLIENT MAERSK OLIE OG GAS AS

VALVE DATA SHEET PROJECT HALFDAN PHASE III DEVELOPMENT

SITE DANISH SECTOR (NORTH SEA)

UNIT HALFDAN A PLATFORM

1 MANUFACTURER: IV VALVES SERVICE: LOW TEMP. SOUR PROCESS AND UTILITY
2 QUANTITY : AS PER MTO DOC NO. HDA-PI-BM-008 LOCATION: OFFSHORE - NORTHSEA
3 VALVE SIZE : MINIMUM 2" MAXIMUM 24"
4 DESIGN REQUIREMENTS
5 VALVE RATING : ASME CLASS 150
6 DESIGN TEMPERATURE RANGE : -10°C TO 93°C
7 END STYLE : WAFER TYPE (NON-LUGGED DESIGN) TO BE
8 INSTALLED BETWEEN ASME B16.5 RF FLANGES
9 PIPING CLASS : AS
10 BORE : MANUFACTURER'S STANDARD
11 FACE TO FACE STANDARD : API 609
12 DESIGN/CONSTRUCTION : API 609
13 WAFER TYPE, SEAT TO SUIT WATER SERVICE
14 CONCENTRIC SEAT (CATERGORY-A OF API 609)
15 ANTI STATIC ; FIRE SAFE DESIGN
16
17 MATERIAL REQUIREMENT
18 BODY : CAST - ASTM A351 GR. CF8M / FORGED A182 F316
19 DISC : CAST - ASTM A351 GR. CF8M / FORGED A182 F316
20 SHAFT / DISC SCREWS : A276 Gr. TP 316
21 SEAT RING : NBR
22 STEM SEALS / PACKING : MANUFACTURER'S STANDARD FOR INTENDED SERVICE
23 OPERATOR : LEVER : 8" AND BELOW
24 : GEAR BOX WITH HANDWHEEL : 10" AND ABOVE
25
26 SUPPLEMENTARY REQUIREMENTS:
27 PROTECTION
28 FIRE SAFE (API 6FA / API 607 OR BS 6755 PART-2) : N/A
29 PAINTING (as per valve specification) : FOR GEAR BOX ONLY
30 SPECIAL REQUIREMENTS : NACE MR-01-75
31 CERTIFICATION REQUIREMENTS : EN 10204-3.1B
32
33
34 INSPECTION AND TESTING REQUIREMENTS
35 TYPE OF INSPECTION REQUIRED INSPECTION AND TESTING NOTES
36 VISUAL EXAMINATION (NOTE A) 100% A WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
37 MAGNETIC PARTICLE EXAMINATION NONE CONCERN LPI EXAMINATION SHALL BE PERFORMED AS
38 LIQUID PENETRANT EXAMINATION (NOTE A) NONE PER VALVE SPECIFICATION HDY-PI-SP-002.
39 RADIOGRAPHIC EXAMINATION NONE B TEST PRESSURE SHALL BE IN ACCORDANCE WITH ASME B 16.34
40 AND VALVE INSPECTION AND TESTING PROCEDURE SHALL BE IN
41 PRESSURE TEST (NOTE B) REQ'D ACCORDANCE WITH API 598 / BS 6755, PART-1. TEST DURATION
42 AND ACCEPTANCE CRITERIA SHALL BE IN ACCORDANCE WITH
43 VALVE SPECIFICATION NO. HDY-PI-SP-002.
44 NOTES
45 1 IN ADDITION TO NAME PLATE, VALVE SHALL BE SUPPLIED WITH A STAINLESS STEEL TAG STAMPED VAS 8W SECURELY
46 FIXED TO THE VALVE WITH NON-CORROSIVE WIRE.
47
48
49
50
51
52
THIS DATA SHEET SHALL BE READ IN CONJUNCTION WITH VALVE SPECIFICATION NO. HDY-PI-SP-002

VALVE TAG VAS 8W

VALVE TYPE BUTTERFLY
DOCUMENT No REV. SHEET
REV DATE DESCRIPTION BY CHKD APPD HDY-PI-DS-004.20 0 1 OF 1