Installation Guide SAMSUNG PROPRIETARY

둣최대
Samsung Magician 7
The software included in this product contains copyrighted software that is licensed under the GNU Lesser General License
(LGPL), BSD, OpenSSL and MIT.

Below is the list of components covered under LGPL. You may obtain the complete Corresponding Source code from us for a
period of three years after our last shipment of this product by sending email to: [email protected]

If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically
Installation Guide
performing source distribution may be charged. This offer is valid to anyone in receipt of this information.

Component License
Revision 1.3
Judy Array LGPL 2.1

DISCLAIMER
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS
WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed herein
may change without notice and is provided on an “AS IS” basis, without warranties of any kind. This document and
all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any
patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the
other party under this document, by implication, estoppels or otherwise. Samsung products are not intended for
use in life support, critical care, medical, safety equipment, or similar applications where product failure could
result in loss of life or personal or physical harm, or any military or defense application, or any governmental
procurement to which special terms or provisions may apply. For updates or additional information about
Samsung products, contact your nearest Samsung office. All brand names, trademarks and registered trademarks
belong to their respective owners.

COPYRIGHT © 2022
This material is copyrighted by Samsung Electronics. Any unauthorized reproductions, use or disclosure of this
material, or any part thereof, is strictly prohibited and is a violation under copyright law.

TRADEMARKS & SERVICE MARKS

The Samsung Logo is the trademark of Samsung Electronics. Adobe is a trademark and Adobe Acrobat is a
registered trademark of Adobe Systems Incorporated. All other company and product names may be trademarks
of the respective companies with which they are associated.

For more information, please visit www.samsung.com/magician

Revision 1.3

1
 Installation Guide SAMSUNG PROPRIETARY

Revision History
Revision
Description Revision Date
Number
1.0 Initial Release Sep 2021
1.1 Bug fix, Security improvement Dec 2021
1.2 New features included, User Instructions Improved Mar 2022
1.3 Bug fix May 2022

Revision 1.3

2
 Installation Guide SAMSUNG PROPRIETARY

1. Introduction
New Samsung Magician 7

Experience the new user-friendly GUI of Samsung Magician. Try our new features and enhanced
functions for better user experience. Samsung Magician provides an integrated convenient solution for
SSD with advanced capabilities.

Samsung Magician software is developed and distributed exclusively for users of Samsung Solid Sate
Drives (SSDs).

New Features

New Samsung Magician features a number of improvements over the previous versions.

- New features include:

 Security Setting – added for managing Samsung Portable SSD.

 Help Center – added for your convenience in using Samsung Magician.
 Chatbot – added for helping you with solving a question about Samsung Magician.

Revision 1.3

3
 Installation Guide SAMSUNG PROPRIETARY

2. Requirements and Support

System Requirements
Component Requirements
Windows 7 (32/64bit)
Windows 8 & 8.1 (32/64bit)
Operating System
Windows 10 (32/64bit)
Windows 11 (32/64bit)

Disk Capacity Minimum 400MB available for installation

Supported Partition Types MBR, GPT

English, Korean, Spanish, German, Japanese,

Supported Languages Chinese(Simplified), French, Italian,

Portuguese, Russian
The following Samsung SSDs are supported*:
Samsung SSD 980 PRO with Heatsink(M.2)
Samsung SSD 980 (M.2)
Samsung SSD 980 PRO (M.2)
Samsung SSD 970 PRO (M.2)
Samsung SSD 970 EVO (M.2)
Samsung SSD 970 EVO Plus (M.2)
Samsung SSD 960 PRO (M.2)
Samsung SSD 960 EVO (M.2)
Samsung SSD 950 PRO (M.2)
Samsung SSD 870 QVO
Samsung SSD 870 EVO
SSD
Samsung SSD 860 PRO
Samsung SSD 860 EVO (2.5”, mSATA, M.2)
Samsung SSD 860 QVO
Samsung SSD 850 PRO
Samsung SSD 850
Samsung SSD 850 EVO (2.5”, mSATA, M.2)
Samsung SSD 840 PRO
Samsung SSD 840 EVO (2.5”, mSATA)
Samsung SSD 840 Series
Samsung SSD 830 Series
Samsung SSD 750 EVO
Samsung Portable SSD Series

Supported Features by model

There are some limitations that exist depending on the type of storage and model.

Revision 1.3

4
 Installation Guide SAMSUNG PROPRIETARY

Features
Perfor
Perfor
Model mance Diagno Over
Drive mance PSID Encrypte Secure Security
SMART RAPID Optimi stic provisio
Info. Bench Revert d Drive Erase Setting
zation Scan ning
mark
(TRIM)
840 PRO √ √ √ √ √ √

840 √ √ √ √ √ √

840 EVO √ √ √ √ √ √ √ √

750 EVO √ √ √ √ √ √ √ √

850 PRO √ √ √ √ √ √ √ √

850 EVO √ √ √ √ √ √ √ √

950 PRO √ √ √ √ √ √ √

960 PRO √ √ √ √ √ √ √

960 EVO √ √ √ √ √ √ √

850 √ √ √ √ √ √ √ √

860 PRO √ √ √ √ √ √ √ √ √ √

860 EVO √ √ √ √ √ √ √ √ √ √

970 PRO √ √ √ √ √ √ √

970 EVO √ √ √ √ √ √ √

860 QVO √ √ √ √ √ √ √ √ √ √
970 EVO
Plus √ √ √ √ √ √ √ √ √

870 EVO √ √ √ √ √ √ √ √ √ √

870 QVO √ √ √ √ √ √ √ √ √ √

980 √ √ √ √ √ √ √ √ √

980 PRO √ √ √ √ √ √ √ √ √
980 PRO
with √ √ √ √ √ √ √ √ √
Heatsink
Samsung
√ √ √
PSSD T1
Samsung
PSSD T3 √ √ √
Samsung √ √ √
PSSD T5
Samsung √ √ √ √ √ √
PSSD T7
Samsung √ √ √ √ √ √
PSSD T7

Revision 1.3

5
 Installation Guide SAMSUNG PROPRIETARY

Touch

Samsung √ √ √ √ √ √
PSSD T7
Shield
Samsung √ √ √ √
PSSD X5

Revision 1.3

6
 Installation Guide SAMSUNG PROPRIETARY

RAPID mode Requirements

Component Requirements
Windows 7 (32/64bit)
Windows 8 & 8.1 (32/64bit)
Operating System
Windows 10 (32/64bit)
Windows 11 (32/64bit)
Samsung SSD 870 EVO
Samsung SSD 870 QVO
Samsung SSD 860 PRO
Samsung SSD 860 EVO (2.5”, mSATA, M.2)
Samsung SSD 860 QVO
SSD Samsung SSD 850 PRO
Samsung SSD 850 EVO (2.5”, mSATA, M.2),
Samsung SSD 850
Samsung SSD 840 PRO
Samsung SSD 840 EVO (2.5”, mSATA),
Samsung SSD 750 EVO
Processor 1GHz or faster

System memory(DRAM) 2GB RAM or more

Free Disk Space Minimum 50MB

File System NTFS

Driver Support
1) SATA

Chipset Driver Supported

Microsoft Yes
Intel
Intel Yes
Microsoft Yes
AMD AMD Yes(With Latest Driver)
NVIDIA Yes

2) NVMe

Driver Supported
Samsung Yes
Microsoft Yes

Revision 1.3

7
 Installation Guide SAMSUNG PROPRIETARY

1) Samsung Magician does not require internet connection to run. However, the internet connection is
required to get updates for the latest Firmware, Feature modules or application and to authenticate
the SSDs.
2) If you delete some files of New Samsung Magician without internet connection, some features like
certification or configuration may not work properly and cause limitations in use of New Samsung
Magician.
3) The SSD should not be disconnected from the system while FW Update, Benchmarking, Secure Erase,
Over Provisioning, Data Security, PSID Revert, Diagnostic scan, Performance Optimization or RAPID
features are in progress. Doing so could result in data corruption.
4) All parallel operations should be terminated before executing Diagnostic scan, Performance
Optimization or Benchmarking features.
5) Data corruption may result if the user terminates the Magician application abnormally while
Benchmarking, FW Update, Secure Erase, Diagnostic scan, Over Provisioning, Data Security, PSID
Revert or RAPID features are in progress.
6) There is always the risk of data loss when updating SSD firmware. It is imperative that the user back
up any important data before performing a firmware update.
7) If there are some system issues for Magician to perform functions, System Compatibility in
Information tab will provide guide to fix the issues.
8) If Samsung Magician is under a proxy network environment, it may not provide the full functionality
such as firmware update.
9) In order for Samsung Magician to function properly, the time of the PC needs to be correctly set.

Revision 1.3

8
 Installation Guide SAMSUNG PROPRIETARY

3. General Limitations
Overall

1) Magician does not work with SSDs connected via the SCSI controller interface.
2) Only MBR and GPT partition types are supported. Magician may not work with other partition types.
3) Magician shows only volumes mounted with letter.
4) Magician will not work on SSDs that are locked with a user password.
5) The user may need to manually refresh for Magician to accurately reflect all connected/removed
disks.
6) RAID on mode in SATA configuration is not supported by Samsung Magician and USB bootable
solution.
7) If you are using any custom storage driver, then Magician may not work properly. Please always use
the latest storage driver or Microsoft driver.
8) In Windows 7, the Samsung NVMe Driver is required for Magician to fully support Samsung’s NVMe
device.
9) In Windows 7, the GUI of the Samsung Magician application may not seem normal intermittently.
10) In the case of the function where the progress time is displayed – Performance benchmark,
Diagnostic scan, and Performance optimization, changing the system time during the function
execution may cause the elapsed time to not appear normally.
11) Magician is signed using SHA-2 to provide a safer service. Windows updates or patches may be
required to use Magician in Windows 7.
12) Depending on the resolution or ratio setting of your display, bottom and right side of Samsung
Magician may be out of screen.
13) For the performance benchmark record that was performed in the previous version of Magician 7.0,
some values may be marked as Unknown.
14) Magician might have compatibility issues with a certain IRST Driver.
15) When RAPID is activated, Restore point warning message is only available in English.
16) If Magician gets connected to or disconnected from the PSSD while performing some feature,
Magician may not work properly.
17) If you try changing the name of security enabled PSSD T1 / T3, the name won’t be changed without
additional guidance when the wrong password is entered.
18) For Windows 8.1, update is required in order of KB2919442, KB2919355, and KB2999226.
19) For Windows 8.1 with update, KB2999226 update is required.
20) Magician icon may appear unchanged until the icon is updated by the system.
21) It may take up to a few seconds for to installer to start.
22) It may take time to move from one screen to the next screen in installer.
23) In rare cases Magician may appear hang. In this case, please restart your PC.
24) In certain environments anti-virus processes may cause unusually slow start up of Magician Program.

Performance Benchmark

1) Benchmarking may not work with some removable storage devices.

2) Performance Benchmark may get timed-out on ASMedia controllers if the driver does not handle
multi thread operations (IOs)

Revision 1.3

9
 Installation Guide SAMSUNG PROPRIETARY

Performance Optimization

1) Performance Optimization supports only the NTFS file system.

2) Magician does not support TRIM operation for Standard Performance Optimization on
Windows 8 and above, as they support native TRIM.

Diagnostic Scan

1) Short scan supports only the NTFS file system.

2) If the device is locked, both short scan and full scan are not supported.
3) When performing Short scan, secure sufficient space of 5GB or more.
4) Samsung NVMe driver v3.3 is required to use SMART Self-test in 970 EVO Plus. In case of 980, 980
PRO, 980 PRO with Heatsink NVMe driver is not required for it.

PSID Revert

1) SSD supporting PSID Revert is 860 EVO 860 EVO M.2, 860 EVO MSATA, 860 PRO, 860 QVO, 970 EVO
Plus, 870 QVO, 870 EVO, 980, 980 PRO, 980 PRO with Heatsink, PSSD T7, PSSD T7 Touch, PSSD T7
Shield.
2) The PSID Revert function can release the encrypted drive using the PSID of the label. After
performing PSID Revert, all data on the drive is deleted.

Secure Erase & Linux Bootable Solution

1) While making a bootable solution for Secure Erase, please make sure the Device Manager window is
closed.
2) In some of the PCs, Bootable Solution may not work properly as expected because of compatibility
issue.
3) The Bootable solution is not compatible with pure SCSI or SATA NVIDIA/LSI/AMD chipset drivers.
4) AHCI or ATA mode must be enabled in the BIOS during PC boot up.
5) The Bootable solution may hang if the SSD is removed on PCs that do not support the hot plug feature
(e.g. ICH5/6 chipsets).
6) The Bootable solution will not work with devices attached via SATA 6Gbps (SATA III) operating in
IDE mode.
7) Secure Erase may not work on systems where SECURITY FREEZE LOCK is issued by the BIOS.
8) Secure Erase may have compatibility issue with some of integrated graphics card or some of discrete
graphics card.

Encrypted Drive

1) Class 0, TCG Opal and Encrypted Drive cannot be enabled simultaneously. Only one mode can be
enabled at a time and all other modes must be disabled.
2) Security mode (Class 0, TCG/Opal or Encrypted Drive) must be disabled (unlocked) before removing
and installing onto another PC.

Revision 1.3

10
 Installation Guide SAMSUNG PROPRIETARY

Over Provisioning

1) Over Provisioning only supports NTFS and raw (Unformatted) partitions.

2) Over Provisioning does not support dynamic disks or disks that require ‘Chkdsk’ operation.
3) Magician cannot guarantee that Over Provisioning scans disk’s partition layout properly, if partition
information had been changed during scanning.
4) Over Provisioning may fail, even though enough free space is available, if your system suffers from
cluster misalignment.
5) If user cannot span or shrink volume size through disk management of OS administration tool, it is
possible not to work dynamic over-provisioning properly.
6) Windows ‘Disk Partition Service’ and ‘Virtual disk Service’ should not be disabled in order to perform
Over Provisioning.
7) Over Provisioning can only be performed on the last accessible partition (NTFS or raw)
8) If a device with more than 4TB applied to the MBR partition is used, the function may not operate
normally.

Security Setting

1) Finding my password is unavailable on Samsung Magician.

2) Up to four fingerprints can be registered on Samsung Magician.

Firmware Update

1) PC will be shut down automatically after firmware update (Magician counts down 20 seconds before
shutdown).
2) Firmware Update may fail on Samsung brand SSDs connected to AMD Controller. Please retry using
default SATA AHCI controller (Microsoft drivers).

Settings

1) When booting the PC, users can decide whether to auto run Samsung Magician. If auto run is turned
off, updates cannot be received in real time.
2) The device scan proceeds immediately after the language is changed.
3) Scaling size varies depending on the resolution.

4. RAPID mode Limitations

1) RAPID mode accelerates only one SSD even though user has several Samsung SSDs (870 QVO, 870
EVO, 860 QVO, 860 EVO, 860 PRO, 850 PRO, 850 EVO, 850, 750 EVO, 840 EVO, and 840 PRO
regardless of form factor).
2) If there are two identical SSDs connected, RAPID mode may accelerate the incorrect SSD.
3) RAID Mode sets is not supported as an accelerated drive.
4) After uninstalling RAPID mode, if the system is restored to a prior state in which RAPID mode was
installed, RAPID mode will be started in a disabled state.
5) NVIDIA Storage controller is not supported.
Revision 1.3

11
 Installation Guide SAMSUNG PROPRIETARY

6) During RAPID mode Enable/Disable operation: Do not disconnect the target SSD, Do not kill the
application.
7) If fast startup is enabled on windows 8, 8.1 and 10 machines, RAPID mode enable/disable requires
system restart. Shutdown followed by turning-on the power will not activate RAPID mode
enable/disable. By default fast startup is enabled.
8) Flush command of operating system and/or application may cause variation in performance when
RAPID mode is enabled.
9) Sometimes on AMD PC with AMD and ASMedia storage controllers it was found that the IOs takes a
longer time to complete. In such cases if Rapid was enabled, it may get automatically disabled due to
such IO errors. It may display "Rapid is in inactive state". User has to reboot the PC to enable the
Rapid back.
10) If multiple iterations of Read and Write are performed, RAPID mode may become inactive due to
system internal errors on some of the AMD / ASMedia Controller or Driver.
11) RAPID mode can't be guaranteed on the target SSD with non-NTFS file system.
12) If user deletes some files on RAPID folder, RAPID may not be uninstalled properly.
13) If the msiexec.exe is either unstable or corrupted, RAPID mode enable fails with the error message
“The Windows Installer service failed to start. Start the Windows Installer service manually, upgrade
the Windows Installer service, and check if the last updated or installed program in Windows was
successful. If the problem persists, contact the A/S center.”

The issue can be fixed by:

- Unregister and reregister Windows Installer service / MSI service.
 On the Start menu, click Run.
 In the Open box, type “msiexec /unreg”. And then press ENTER.
 On the Start menu, click Run
 In the Open box, type “msiexec /regserver”. And then press ENTER.
 Try enabling RAPID mode again.
If RAPID mode does not enable, follow the steps below.
- Updating Windows Installer
 If your Windows Installer is not the latest version, corrupted or msiexec is
missing, please install the latest version of Windows Installer, then try
enabling RAPID mode again.
- If none of the above procedures work, we recommend reinstalling Windows.

Revision 1.3

12
 Installation Guide SAMSUNG PROPRIETARY

Operational Check of RAPID mode

RAPID mode starts its operation 45 seconds after OS booting. Please make sure the increased size of non-
paged pool using “task manager → performance → memory tab” to ensure it is fully operational.

* Before RAPID mode enabling

* After RAPID mode enabling

Revision 1.3

13
 Installation Guide SAMSUNG PROPRIETARY

May 2022

www.samsung.com/magician

Design and contents of this manual are subject to change without notice.

© 2022 Samsung Electronics, Co., Ltd. All rights reserved.

Revision 1.3

14