Scribd
Upload
238 views

PLC Programming Traffic Light

This document provides information about designing a ladder logic program for a 4-way traffic light control system using LogixPro. It lists the inputs and outputs needed, including start, stop, and memory bits as well as outputs to control the green, red, and yellow lights for each direction. It then shows the logic states to cycle through the lights in each direction following a tabular sequence. Finally, it displays the completed ladder logic diagram to implement the 4-way traffic light control system in LogixPro.

Uploaded by

arvind meshram
Copyright
© © All Rights Reserved
Available Formats
Download as PPSX, PDF, TXT or read online on Scribd
238 views

PLC Programming Traffic Light

This document provides information about designing a ladder logic program for a 4-way traffic light control system using LogixPro. It lists the inputs and outputs needed, including start, stop, and memory bits as well as outputs to control the green, red, and yellow lights for each direction. It then shows the logic states to cycle through the lights in each direction following a tabular sequence. Finally, it displays the completed ladder logic diagram to implement the 4-way traffic light control system in LogixPro.

Uploaded by

arvind meshram
Copyright
© © All Rights Reserved
Available Formats
Download as PPSX, PDF, TXT or read online on Scribd
You are on page 1/ 18

MVPS’s KBT College of Engineering

Name of Faculty : Mr. Arvind P. Meshram


Department : E&TC Engineering

Maratha Vidya Prasarak Samaj’s

Karmaveer Adv. Baburao


Ganpatrao
Thakare College of Engineering
Nashik Maharashtra, India
PLC Programming : LogixPro

Design ladder logic for 4 way-traffic


light control system
Design ladder logic for 4 way-traffic light
control system
We can take four directions : NORTH, SOUTH,
WEST, and EAST

With three output lamps : GREEN, RED, and


YELLOW.
Follow below tabular column – Logic for the four way
traffic light

State EAST WEST NORTH SOUTH


1 G R R R
2 Y R Y R
3 R R G R
4 R Y Y R
5 R G R R
6 R Y R Y
7 R R R G
8 Y R R Y
N

W E

S
N

W E

S
List of Inputs and Outputs
SN For LogixPro Name Input/Output
1 I:1/0 Start Input
2 I:1/1 Stop Input
3 O:4/0,1,2,3 Memory Memory
4 O:2/0 East - Green Output
5 O:2/1 North - Red Output
6 O:2/2 We st - Re d Output
7 O:2/3 South - Red Output
8 O:2/4 E a s t – Ye l l o w Output
9 O:2/5 N o r t h - Ye l l o w Output
10 O:2/6 North - Green Output
11 O:2/7 East - Red Output
12 O:2/8 W e s t – Ye l l o w Output
13 O:2/9 West – Gre en Output
14 O:2/10 S o u t h – Ye l l o w Output
15 O:2/11 South - Green Output
East- Green
North - Red
West - Red
South - Red West - Red West - Red
South - Red South – Red
East – Yellow North - Green
North- Yellow East - Red
North - Red
North - Red
East - Red
South - Red South - Red
 West – Yellow
North- Yellow East - Red
South – Yellow
East - Red West – Green
 West – Yellow
East- Green
North - Red
North - Red West - Red
 West - Red South - Red
East - Red
South - Green
Here is LogixPro
Ladder Diagram for 4 way-traffic light control
system
Mr. Arvind P. Meshram
Dept of E&TC Engineering,
MVPS’s KBT College of Engineering, Nashik

You might also like