Scribd
Upload
192 views2 pages

0693 Bs2752 c50 50 Shore Specification Neoprene Chloroprene CR Rubber Sheet

This document provides specifications for a 50° Shore Chloroprene (CR) or Neoprene rubber sheet conforming to BS2752:2003 standards. It lists values for properties like accelerated aging resistance, elongation at break, compression set, tensile strength and others. The sheet is suitable for industries like aerospace and defense and is chemically resistant, flame retardant, self-extinguishing and tear resistant. It also notes that while the data is a guideline, individual results may vary and the customer must evaluate if the properties suit their intended use.

Uploaded by

Serbo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views2 pages

0693 Bs2752 c50 50 Shore Specification Neoprene Chloroprene CR Rubber Sheet

This document provides specifications for a 50° Shore Chloroprene (CR) or Neoprene rubber sheet conforming to BS2752:2003 standards. It lists values for properties like accelerated aging resistance, elongation at break, compression set, tensile strength and others. The sheet is suitable for industries like aerospace and defense and is chemically resistant, flame retardant, self-extinguishing and tear resistant. It also notes that while the data is a guideline, individual results may vary and the customer must evaluate if the properties suit their intended use.

Uploaded by

Serbo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data Sheet 0693 BS2752 C50 (50°SHore) Specification

Neoprene/Chloroprene (CR) Rubber Sheet

Data Sheet Type Final


Material Reference 0693
Polymer CR
Date Issued 11/04/22

Description

A 50° Shore Chloroprene (CR) or as better known Neoprene Specification Rubber Sheet conforming to
BS2752:2003 and for use in industries and/or applications where surety over the compound is required. Designed
originally for Aerospace & Defence Industries.

Specifications Values Test Methods

Accelerated Ageing - Change in Elongation at Break -20 % Change to Original BS903 Part A19 Method A
(168 Hours @ 70°C)

Accelerated Ageing - Change in Tensile Strength (168 -12 % Change to Original BS903 Part A19 Method A
Hours @ 70&degC)

Accelerated Ageing - Change in Hardness (168 Hours +7 ° Shore Change to BS903 Part A19 Method A
@ 70°C) Original

Available from Stock Yes None

Colour Black None

Compression Set(22 Hours @ 70°C) 30 % Maximum ASTM D395 Method B

Elongation at Break 400 % Minimum ASTM D412

Highest Recommended Working Temperature 110 °C Maximum None

Liquid Resistance - Volume Change 24 Hrs @ 40°C -0 +80 % BS ISO 1817

Lowest Recommended Working Temperature -40 °C None

Shore Hardness(IRHD) 50 ° Shore BS903 Part A26 Method N

Tensile Strength 12 MPA Minimum ASTM D412

Purposes

Chemical Resistant Flame Retardent Self Extinguishing Tear Resistant

1/2
Important Notes about this Material Data Sheet
This datasheet has been carefully compiled to advise you, our customer, in the best possible way. The information,
figures, test values, and data correspond to actual engineering standards and are the result of many years of tests
and trials. As individual operating conditions influence the application of each product, the information supplied in
this datasheet can only be seen as a rough guideline. In every case it is the sole responsibility of the customer to
evaluate his individual requirements, in particular whether the specified properties of our products are sufficient for
the intended use. This datasheet is subject to alteration without prior notice . All mentioned values contained herein
are guiding values representing long-term experience averages. Please be aware that Test Results for individual
Material Batches will only be provided if requested at the time of order and may be subject to additional charges
and/or lead times. This Data Sheet supersedes all previous data sheets and any other data previously provided
either Verbally, Electronic or Written, with reference to the above Material Grade.

2/2

Powered by TCPDF (www.tcpdf.org)

You might also like