Scribd
Upload
50 views1 page

MCS-SEH-P Spec Sheet

This document provides specifications for the MCS-MAGNUM-N MCS-SEH-P electric expansion valve. It lists materials of construction, operating temperature and pressure ranges, motor specifications, and dimensions. The valve uses a step motor to precisely control liquid refrigerant flow through discrete angular movements of the motor shaft which positions the valve piston. It can be interfaced with MCS microprocessor controllers and is suitable for applications in air conditioning and refrigeration systems.

Uploaded by

Syed Ali Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views1 page

MCS-SEH-P Spec Sheet

This document provides specifications for the MCS-MAGNUM-N MCS-SEH-P electric expansion valve. It lists materials of construction, operating temperature and pressure ranges, motor specifications, and dimensions. The valve uses a step motor to precisely control liquid refrigerant flow through discrete angular movements of the motor shaft which positions the valve piston. It can be interfaced with MCS microprocessor controllers and is suitable for applications in air conditioning and refrigeration systems.

Uploaded by

Syed Ali Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

The MCS-MAGNUM-N

MCS-SEH-P
Specifications
Description & Specifications
& Description

File # SA5460 Specifications


Materials of Construction ..............Brass, copper, stainless
steel, synthetic seals Motor
Type...............................................Permanent magnet bipolar
internal (wet) motor
Fluid Temp. Range................................. -50°F to 155°F (-40°C to 68°C)
Ambient Temp. Range.................... -50°F to 140°F (-40°C to 60°C)
Relative Humidity.......................... 0-100% (Condensing)
Supply Voltage..............................12 volts DC +/-10%
Phase Resistance.........................75 ohms +/-10%
Stepping Current ..........................160 mA/winding
Maximum Power............................3.8 watts
Step Rate......................................200/second (L/R)
400/second recommended
Part # - MCS-SEH-P Number of Steps........................... 6386 Steps
333 Ton Nominal Electric Expansion Valve Maximum Rated Pressure (MRP)....620 psig (43 bar)
(EXV) 1 5/8” x 2 1/8” ODF Solder with 20’
Operating Temperature Range...........-50°F to 155°F (-45°C to 68° C)
Cable (Straight Through Configuration)
Materials of Construction...............copper - fittings; brass -
valve body; synthetic
materials - seating and
seals; stainless steel -
Description motor housing, and adaptors
The SEH-P are Electronically Operated Step motor flow control Cable Type - 20’............................ Hermetic 4 lead, 18 AWG,
valves, intended for the precise control of liquid refrigerant flow. PVC insulation
Synchronized signals to the motor provide discrete angular
movement, which translates into precise linear positioning Packaging
of the valve piston. Valve pistons and ports are uniquely Ship Weight........................ 5.95 lb (approx)
characterized, providing improved flow resolution and performance. Box Dimensions................. 14” x 12” x 5” (approx)
The SEH-P valves are easily interfaced with MCS microprocessor
based controllers. Therefore, they are applicable on all the
same types of systems found in the air conditioning and refrigeration
industry as thermostatic expansion valves.
The SEH-P valves modulate by the electronically controlled
rotation of a step motor. The step motor drives a gear train and
lead screw to position a piston. The piston is used to modulate 5.61”
flow through a port. (1.43 mm)
0.91”
The motor is a two phase type driven in the bi-polar mode. Two 1.813” (46 mm) HEX
discrete sets of motor stator windings are powered in sequence (23 mm)
to rotate the rotor 3.6 degrees per step. Polarity of the drive
signal reverses for each step. ‘A’

When used with one of the MCS Controls, the valves provide
unsurpassed accuracy in resolution of flow and repeatability of
FLOW
position. 1.90” 2.18”
(48 mm) (55 mm)

VALVE FITTINGS A
SEH-P 13 X 17 ODF 10.25”(260 mm)

Dimensions in inches (mm)


Revision 2021-10-04

5580 Enterprise Pkwy., Fort Myers, FL 33905


For complete temperature chart, refer to the MCS-T100 spec sheet
Office: 239-694-0089 • Fax: 239-694-0031 www.mcscontrols.com

You might also like