Scribd
Upload
112 views2 pages

2shreyas - Resume

Shreyas Pethe is seeking opportunities in semiconductor manufacturing and materials science. He has a B.Tech in Metallurgy and Materials Science from College of Engineering, Pune, where he is currently ranked 3rd out of 78 students with a GPA of 8.63/10. He has internship experience at IIT Bombay working on silicon nanowire devices and at Vishay Components investigating microstructural changes in electronic components. He also has project experience developing electronic voting machines and coating systems using nano zinc-phosphate.

Uploaded by

Ali Sanadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views2 pages

2shreyas - Resume

Shreyas Pethe is seeking opportunities in semiconductor manufacturing and materials science. He has a B.Tech in Metallurgy and Materials Science from College of Engineering, Pune, where he is currently ranked 3rd out of 78 students with a GPA of 8.63/10. He has internship experience at IIT Bombay working on silicon nanowire devices and at Vishay Components investigating microstructural changes in electronic components. He also has project experience developing electronic voting machines and coating systems using nano zinc-phosphate.

Uploaded by

Ali Sanadi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SHREYAS +91 9822113665

[email protected]

PETHE [email protected]
www.linkedin.com/in/shreyas-pethe

OBJECTIVE
Seeking learning opportunities in the field of semiconductor manufacturing, device materials,
MEMS, nanomaterials and nano-electronics.

EDUCATION
B.Tech. Metallurgy & Materials Science | College of Engineering, Pune (CoEP)
JULY 2015 – PRESENT
Currently positioned 3rd in the class of 78, with a CGPA of 8.63/10. The curriculum covered various
metallurgy related subjects like physical metallurgy, heat treatment etc., as well as studies of
modern materials science including nanomaterials, ceramics, polymers and composites, electronic
and magnetic materials.
Minor in Renewable Energy covering study of Solar, Wind, Bio and Hydro energy systems.

Higher Secondary School (Std. 12th) | Maharashtra State Board


JUNE 2013 – JUNE 2015
91% aggregate score with 97/100 in mathematics, 93/100 in chemistry and 91/100 in physics.

Secondary School (Std. 10th) | Maharashtra State Board


JUNE 2003 – JUNE 2013
95.45% aggregate score. Appeared for various Olympiad exams during schooling.

EXPERIENCE
Project Intern | Indian Institute of Technology, Bombay.
JAN 2018 – PRESENT
 Working for developing silicon nanowire device using Hot Wire Chemical Vapor Deposition at
Semiconductor Thin films and Plasma Processing Lab.
 Previously studied effect of change of sputtering process parameters on the deposition of
Indium-Tin-Oxide.
 Handled various instruments like surface profilometer (Dektak), UV-Visible
spectrophotometer.
 Studied characterization techniques like AFM, Electron Microscopy, X-ray photoemission
spectroscopy etc.
Intern | Vishay Components, Loni
JUNE 2016 – JULY 2016
 Investigated microstructural changes in the caps used for passive components like resistors
and capacitors at Chemical and Materials Testing Lab.
 Observed and studied various industrial processes like PVD, magnetron sputtering etc. in
fabrication of film capacitors and wire wound resistors.

Student Member | Robot Study Circle


DEC 2015 – AUG 2017
 National runner up ABU ROBOCON 2016
 National WINNERS in ABU ROBCON 2017 among around 200 teams.
 Got interdisciplinary knowledge: Automation and mechanisms, Electronic and control systems
and programming. Handled selection of materials, building of chassis, incorporating sensors
and actuators etc.

PROJECTS
 “Design and Fabrication of Combined Cathodic Protection and Organic Coating System Using
Nano Zinc-Phosphate”, for Technocraft Booth Project Competition, under guidance of Dr. P. P.
Deshpande.
 “Design and Manufacturing of Electronic Voting Machine” in the Robotics & Automation Lab
for college elections.
 “Silicon nanowire growth Using Hot-Wire Chemical Vapor Deposition by in-situ reduction of
transparent conducting oxides”, Under Prof. Rajiv Dusane at Indian Institute of Technology,
Bombay.


 ACHIEVEMENTS AND CERTIFICATES
 Recipient of Steel Scholarship by Ministry of Steel, Government of India.
 Inspire Scholarship by Dept. of Science and Technology, Government of India.
 State government scholarship holder middle school level.
 Runner up in 2016, and First prize 2017, in metallography competition “On the Etch” at
MindSpark at College of Engineering, Pune.

SKILLS
 Materials Characterization  Languages :
 Knowledge in Sustainable Energy Systems English – Full Professional Proficiency
 Computer programming- C & JAVA (TOEFL : 109/120)
 CAD – Expertise in Solidworks Japanese – N5 level cleared
French – Elementary level proficiency

ACTIVITIES
 Working as student secretary for SPIC-MACAY, CoEP for the A.Y. 2018-19.
 Marathi section head for College’s Annual Magazine, “Abhiyanta”.
 Wrote script and narrated for two consecutive years for “Regatta”, annual event of Boat Club
of CoEP.

You might also like