Synchro-Cog HT

Synchronous Drive Belt

High torque capacity

Economical

Synchronous Belts
Smaller, more compact
packages
1
Maximum drive
efficiency
2
HTD tooth profile

Applications:
3 Blowers
Mixers
Machine tools
4
Sewing machines
Food processing
Paper processing
& More

1 Fiberglass Cord 2 Fabric Cover 4 Synthetic Rubber Backing

Chemically treated to assure Resistance to tooth wear For maximum resistance
superior length stability, and shear from friction. to ozone, grease, heat
maximum flexibility, and build-up, sunlight and
high tensile strength for 3 Teeth flex fatigue
heavy shock loads. Precisely formed and
accurately spaced for
smooth, uniform transfer
of power and resistance
to shear.

Recommended Sprockets:
High Torque Synchronous (HTS) Sprockets – MPB, QD, Taper Bushed (3mm, 5mm, 8mm, 14mm)

www.carlislebelts.com 27
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT delivers trouble-free power transmission with a smooth and quiet drive system.
®

Synchro-Cog HT Belts are made

®

using fiberglass cord that is treated to

assure length stability, flexibility, and
high tensile strength. The rubber teeth
are precisely formed and accurately
spaced for smooth, uniform transfer of
power and shear resistance.
A specially formulated rubber backing
resists ozone, grease, heat build-up,
sunlight and flex-fatigue.
The nylon fabric cover is designed to
provide drive efficiency and resistance
to tooth wear and shear.

28 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT

| |
®
|
Pitch Length Tooth Pitch Width
Part Number Example: 144-3M-15  = 144 – 3M – 15

Part Numbers

(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
3M Pitch – High Torque Synchronous (HTS) Sprockets: 3M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (3mm) MPB, QD, Taper Bushed (3mm)

144-3M-6 48 144 5.7 0.005 210-3M-6 70 210 8.3 0.007

144-3M-9 48 144 5.7 0.007 210-3M-9 70 210 8.3 0.010
144-3M-15 48 144 5.7 0.012 210-3M-15 70 210 8.3 0.017
150-3M-6 50 150 5.9 0.005 213-3M-6 71 213 8.4 0.007
150-3M-9 50 150 5.9 0.007 213-3M-9 71 213 8.4 0.010
150-3M-15 50 150 5.9 0.012 213-3M-15 71 213 8.4 0.017
159-3M-6 53 159 6.3 0.005 222-3M-6 74 222 8.7 0.007
159-3M-9 53 159 6.3 0.008 222-3M-9 74 222 8.7 0.011
159-3M-15 53 159 6.3 0.013 222-3M-15 74 222 8.7 0.018
168-3M-6 56 168 6.6 0.005 225-3M-6 75 225 8.9 0.007
168-3M-9 56 168 6.6 0.008 225-3M-9 75 225 8.9 0.011
168-3M-15 56 168 6.6 0.014 225-3M-15 75 225 8.9 0.018
177-3M-6 59 177 7.0 0.006 228-3M-6 76 228 9.0 0.007
177-3M-9 59 177 7.0 0.009 228-3M-9 76 228 9.0 0.011
177-3M-15 59 177 7.0 0.014 228-3M-15 76 228 9.0 0.019
180-3M-6 60 180 7.1 0.006 234-3M-6 78 234 9.2 0.008
180-3M-9 60 180 7.1 0.009 234-3M-9 78 234 9.2 0.011
180-3M-15 60 180 7.1 0.015 234-3M-15 78 234 9.2 0.019
186-3M-6 62 186 7.3 0.006 240-3M-6 80 240 9.4 0.008
186-3M-9 62 186 7.3 0.009 240-3M-9 80 240 9.4 0.012
186-3M-15 62 186 7.3 0.015 240-3M-15 80 240 9.4 0.019
189-3M-6 63 189 7.4 0.006 252-3M-6 84 252 9.9 0.008
189-3M-9 63 189 7.4 0.009 252-3M-9 84 252 9.9 0.012
189-3M-15 63 189 7.4 0.015 252-3M-15 84 252 9.9 0.020
192-3M-6 64 192 7.6 0.006 255-3M-6 85 255 10.0 0.008
192-3M-9 64 192 7.6 0.009 255-3M-9 85 255 10.0 0.012
192-3M-15 64 192 7.6 0.016 255-3M-15 85 255 10.0 0.021
201-3M-6 67 201 7.9 0.007 264-3M-6 88 264 10.4 0.009
201-3M-9 67 201 7.9 0.010 264-3M-9 88 264 10.4 0.013
201-3M-15 67 201 7.9 0.016 264-3M-15 88 264 10.4 0.021
207-3M-6 69 207 8.1 0.007 267-3M-6 89 267 10.5 0.009
207-3M-9 69 207 8.1 0.010 267-3M-9 89 267 10.5 0.013
207-3M-15 69 207 8.1 0.017 267-3M-15 89 267 10.5 0.022

www.carlislebelts.com 29
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
3M Pitch – High Torque Synchronous (HTS) Sprockets: 3M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (3mm) MPB, QD, Taper Bushed (3mm)
276-3M-6 92 276 10.9 0.009 375-3M-6 125 375 14.8 0.012
276-3M-9 92 276 10.9 0.013 375-3M-9 125 375 14.8 0.018
276-3M-15 92 276 10.9 0.022 375-3M-15 125 375 14.8 0.030
285-3M-6 95 285 11.2 0.009 384-3M-6 128 384 15.1 0.012
285-3M-9 95 285 11.2 0.014 384-3M-9 128 384 15.1 0.019
285-3M-15 95 285 11.2 0.023 384-3M-15 128 384 15.1 0.031
300-3M-6 100 300 11.8 0.010 390-3M-6 130 390 15.4 0.013
300-3M-9 100 300 11.8 0.015 390-3M-9 130 390 15.4 0.019
300-3M-15 100 300 11.8 0.024 390-3M-15 130 390 15.4 0.032
312-3M-6 104 312 12.3 0.010 405-3M-6 135 405 15.9 0.013
312-3M-9 104 312 12.3 0.015 405-3M-9 135 405 15.9 0.020
312-3M-15 104 312 12.3 0.025 405-3M-15 135 405 15.9 0.033
318-3M-6 106 318 12.5 0.010 420-3M-6 140 420 16.5 0.014
318-3M-9 106 318 12.5 0.015 420-3M-9 140 420 16.5 0.020
318-3M-15 106 318 12.5 0.026 420-3M-15 140 420 16.5 0.034
324-3M-6 108 324 12.8 0.011 447-3M-6 149 447 17.6 0.015
324-3M-9 108 324 12.8 0.016 447-3M-9 149 447 17.6 0.022
324-3M-15 108 324 12.8 0.026 447-3M-15 149 447 17.6 0.036
330-3M-6 110 330 13.0 0.011 456-3M-6 152 456 18.0 0.015
330-3M-9 110 330 13.0 0.016 456-3M-9 152 456 18.0 0.022
330-3M-15 110 330 13.0 0.027 456-3M-15 152 456 18.0 0.037
339-3M-6 113 339 13.3 0.011 474-3M-6 158 474 18.7 0.015
339-3M-9 113 339 13.3 0.017 474-3M-9 158 474 18.7 0.023
339-3M-15 113 339 13.3 0.028 474-3M-15 158 474 18.7 0.038
357-3M-6 119 357 14.1 0.012 483-3M-6 161 483 19.0 0.016
357-3M-9 119 357 14.1 0.017 483-3M-9 161 483 19.0 0.024
357-3M-15 119 357 14.1 0.029 483-3M-15 161 483 19.0 0.039
360-3M-6 120 360 14.2 0.012 495-3M-6 165 495 19.5 0.016
360-3M-9 120 360 14.2 0.018 495-3M-9 165 495 19.5 0.024
360-3M-15 120 360 14.2 0.029 495-3M-15 165 495 19.5 0.040
363-3M-6 121 363 14.3 0.012 501-3M-6 167 501 19.7 0.016
363-3M-9 121 363 14.3 0.018 501-3M-9 167 501 19.7 0.024
363-3M-15 121 363 14.3 0.029 501-3M-15 167 501 19.7 0.041

30 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 180-5M-25  = 180 – 5M – 25

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
3M Pitch – High Torque Synchronous (HTS) Sprockets: 3M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (3mm) MPB, QD, Taper Bushed (3mm)

513-3M-6 171 513 20.2 0.017 804-3M-6 268 804 31.7 0.026
513-3M-9 171 513 20.2 0.025 804-3M-9 268 804 31.7 0.039
513-3M-15 171 513 20.2 0.042 804-3M-15 268 804 31.7 0.065
522-3M-6 174 522 20.6 0.017 1026-3M-6 342 1026 40.4 0.033
522-3M-9 174 522 20.6 0.025 1026-3M-9 342 1026 40.4 0.050
522-3M-15 174 522 20.6 0.042 1026-3M-15 342 1026 40.4 0.083
531-3M-6 177 531 20.9 0.017 1401-3M-6 467 1401 55.2 0.046
531-3M-9 177 531 20.9 0.026 1401-3M-9 467 1401 55.2 0.068
531-3M-15 177 531 20.9 0.043 1401-3M-15 467 1401 55.2 0.114
564-3M-6 188 564 22.2 0.018 5M Pitch – High Torque Synchronous (HTS) Sprockets:
564-3M-9 188 564 22.2 0.027 MPB, QD, Taper Bushed (5mm)

564-3M-15 188 564 22.2 0.046 180-5M-9 36 180 7.1 0.014

570-3M-6 190 570 22.4 0.019 180-5M-15 36 180 7.1 0.024
570-3M-9 190 570 22.4 0.028 180-5M-25 36 180 7.1 0.040
570-3M-15 190 570 22.4 0.046 200-5M-9 40 200 7.9 0.016
582-3M-6 194 582 22.9 0.019 200-5M-15 40 200 7.9 0.027
582-3M-9 194 582 22.9 0.028 200-5M-25 40 200 7.9 0.045
582-3M-15 194 582 22.9 0.047 210-5M-9 42 210 8.3 0.017
600-3M-6 200 600 23.6 0.019 210-5M-15 42 210 8.3 0.028
600-3M-9 200 600 23.6 0.029 210-5M-25 42 210 8.3 0.047
600-3M-15 200 600 23.6 0.049 215-5M-9 43 215 8.5 0.017
633-3M-6 211 633 24.9 0.021 215-5M-15 43 215 8.5 0.029
633-3M-9 211 633 24.9 0.031 215-5M-25 43 215 8.5 0.048
633-3M-15 211 633 24.9 0.051 225-5M-9 45 225 8.9 0.018
711-3M-6 237 711 28.0 0.023 225-5M-15 45 225 8.9 0.030
711-3M-9 237 711 28.0 0.035 225-5M-25 45 225 8.9 0.050
711-3M-15 237 711 28.0 0.058 230-5M-9 46 230 9.1 0.019
735-3M-6 245 735 28.9 0.024 230-5M-15 46 230 9.1 0.031
735-3M-9 245 735 28.9 0.036 230-5M-25 46 230 9.1 0.051
735-3M-15 245 735 28.9 0.060 235-5M-9 47 235 9.3 0.019
750-3M-6 250 750 29.5 0.024 235-5M-15 47 235 9.3 0.032
750-3M-9 250 750 29.5 0.037 235-5M-25 47 235 9.3 0.053
750-3M-15 250 750 29.5 0.061 245-5M-9 49 245 9.6 0.020

www.carlislebelts.com 31
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

245-5M-15 49 245 9.6 0.033 300-5M-15 60 300 11.8 0.040

245-5M-25 49 245 9.6 0.055 300-5M-25 60 300 11.8 0.067
250-5M-9 50 250 9.8 0.020 305-5M-9 61 305 12.0 0.025
250-5M-15 50 250 9.8 0.034 305-5M-15 61 305 12.0 0.041
250-5M-25 50 250 9.8 0.056 305-5M-25 61 305 12.0 0.068
255-5M-9 51 255 10.0 0.021 310-5M-9 62 310 12.2 0.025
255-5M-15 51 255 10.0 0.034 310-5M-15 62 310 12.2 0.042
255-5M-25 51 255 10.0 0.057 310-5M-25 62 310 12.2 0.069
260-5M-9 52 260 10.2 0.021 320-5M-9 64 320 12.6 0.026
260-5M-15 52 260 10.2 0.035 320-5M-15 64 320 12.6 0.043
260-5M-25 52 260 10.2 0.058 320-5M-25 64 320 12.6 0.072
265-5M-9 53 265 10.4 0.021 325-5M-9 65 325 12.8 0.026
265-5M-15 53 265 10.4 0.036 325-5M-15 65 325 12.8 0.044
265-5M-25 53 265 10.4 0.059 325-5M-25 65 325 12.8 0.073
270-5M-9 54 270 10.6 0.022 330-5M-9 66 330 13.0 0.027
270-5M-15 54 270 10.6 0.036 330-5M-15 66 330 13.0 0.044
270-5M-25 54 270 10.6 0.060 330-5M-25 66 330 13.0 0.074
275-5M-9 55 275 10.8 0.022 340-5M-9 68 340 13.4 0.027
275-5M-15 55 275 10.8 0.037 340-5M-15 68 340 13.4 0.046
275-5M-25 55 275 10.8 0.061 340-5M-25 68 340 13.4 0.076
280-5M-9 56 280 11.0 0.023 345-5M-9 69 345 13.6 0.028
280-5M-15 56 280 11.0 0.038 345-5M-15 69 345 13.6 0.046
280-5M-25 56 280 11.0 0.063 345-5M-25 69 345 13.6 0.077
285-5M-9 57 285 11.2 0.023 350-5M-9 70 350 13.8 0.028
285-5M-15 57 285 11.2 0.038 350-5M-15 70 350 13.8 0.047
285-5M-25 57 285 11.2 0.064 350-5M-25 70 350 13.8 0.078
290-5M-9 58 290 11.4 0.023 360-5M-9 72 360 14.2 0.029
290-5M-15 58 290 11.4 0.039 360-5M-15 72 360 14.2 0.048
290-5M-25 58 290 11.4 0.065 360-5M-25 72 360 14.2 0.080
295-5M-9 59 295 11.6 0.024 365-5M-9 73 365 14.4 0.029
295-5M-15 59 295 11.6 0.040 365-5M-15 73 365 14.4 0.049
295-5M-25 59 295 11.6 0.066 365-5M-25 73 365 14.4 0.082
300-5M-9 60 300 11.8 0.024 370-5M-9 74 370 14.6 0.030

32 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 370-5M-15  = 370 – 5M – 15

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

370-5M-15 74 370 14.6 0.050 430-5M-15 86 430 16.9 0.058

370-5M-25 74 370 14.6 0.083 430-5M-25 86 430 16.9 0.096
375-5M-9 75 375 14.8 0.030 435-5M-9 87 435 17.1 0.035
375-5M-15 75 375 14.8 0.050 435-5M-15 87 435 17.1 0.058
375-5M-25 75 375 14.8 0.084 435-5M-25 87 435 17.1 0.097
380-5M-9 76 380 15.0 0.031 440-5M-9 88 440 17.3 0.035
380-5M-15 76 380 15.0 0.051 440-5M-15 88 440 17.3 0.059
380-5M-25 76 380 15.0 0.085 440-5M-25 88 440 17.3 0.098
385-5M-9 77 385 15.2 0.031 445-5M-9 89 445 17.5 0.036
385-5M-15 77 385 15.2 0.052 445-5M-15 89 445 17.5 0.060
385-5M-25 77 385 15.2 0.086 445-5M-25 89 445 17.5 0.099
390-5M-9 78 390 15.4 0.031 450-5M-9 90 450 17.7 0.036
390-5M-15 78 390 15.4 0.052 450-5M-15 90 450 17.7 0.060
390-5M-25 78 390 15.4 0.087 450-5M-25 90 450 17.7 0.101
395-5M-9 79 395 15.6 0.032 460-5M-9 92 460 18.1 0.037
395-5M-15 79 395 15.6 0.053 460-5M-15 92 460 18.1 0.062
395-5M-25 79 395 15.6 0.088 460-5M-25 92 460 18.1 0.103
400-5M-9 80 400 15.7 0.032 465-5M-9 93 465 18.3 0.037
400-5M-15 80 400 15.7 0.054 465-5M-15 93 465 18.3 0.062
400-5M-25 80 400 15.7 0.089 465-5M-25 93 465 18.3 0.104
405-5M-9 81 405 15.9 0.033 470-5M-9 94 470 18.5 0.038
405-5M-15 81 405 15.9 0.054 470-5M-15 94 470 18.5 0.063
405-5M-25 81 405 15.9 0.090 470-5M-25 94 470 18.5 0.105
410-5M-9 82 410 16.1 0.033 475-5M-9 95 475 18.7 0.038
410-5M-15 82 410 16.1 0.055 475-5M-15 95 475 18.7 0.064
410-5M-25 82 410 16.1 0.092 475-5M-25 95 475 18.7 0.106
420-5M-9 84 420 16.5 0.034 480-5M-9 96 480 18.9 0.039
420-5M-15 84 420 16.5 0.056 480-5M-15 96 480 18.9 0.064
420-5M-25 84 420 16.5 0.094 480-5M-25 96 480 18.9 0.107
425-5M-9 85 425 16.7 0.034 490-5M-9 98 490 19.3 0.039
425-5M-15 85 425 16.7 0.057 490-5M-15 98 490 19.3 0.066
425-5M-25 85 425 16.7 0.095 490-5M-25 98 490 19.3 0.109
430-5M-9 86 430 16.9 0.035 500-5M-9 100 500 19.7 0.040

www.carlislebelts.com 33
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

500-5M-15 100 500 19.7 0.067 570-5M-15 114 570 22.4 0.076
500-5M-25 100 500 19.7 0.112 570-5M-25 114 570 22.4 0.127
505-5M-9 101 505 19.9 0.041 575-5M-9 115 575 22.6 0.046
505-5M-15 101 505 19.9 0.068 575-5M-15 115 575 22.6 0.077
505-5M-25 101 505 19.9 0.113 575-5M-25 115 575 22.6 0.128
510-5M-9 102 510 20.1 0.041 580-5M-9 116 580 22.8 0.047
510-5M-15 102 510 20.1 0.068 580-5M-15 116 580 22.8 0.078
510-5M-25 102 510 20.1 0.114 580-5M-25 116 580 22.8 0.130
520-5M-9 104 520 20.5 0.042 585-5M-9 117 585 23.0 0.047
520-5M-15 104 520 20.5 0.070 585-5M-15 117 585 23.0 0.078
520-5M-25 104 520 20.5 0.116 585-5M-25 117 585 23.0 0.131
525-5M-9 105 525 20.7 0.042 590-5M-9 118 590 23.2 0.047
525-5M-15 105 525 20.7 0.070 590-5M-15 118 590 23.2 0.079
525-5M-25 105 525 20.7 0.117 590-5M-25 118 590 23.2 0.132
530-5M-9 106 530 20.9 0.043 600-5M-9 120 600 23.6 0.048
530-5M-15 106 530 20.9 0.071 600-5M-15 120 600 23.6 0.080
530-5M-25 106 530 20.9 0.118 600-5M-25 120 600 23.6 0.134
535-5M-9 107 535 21.1 0.043 605-5M-9 121 605 23.8 0.049
535-5M-15 107 535 21.1 0.072 605-5M-15 121 605 23.8 0.081
535-5M-25 107 535 21.1 0.120 605-5M-25 121 605 23.8 0.135
540-5M-9 108 540 21.3 0.043 610-5M-9 122 610 24.0 0.049
540-5M-15 108 540 21.3 0.072 610-5M-15 122 610 24.0 0.082
540-5M-25 108 540 21.3 0.121 610-5M-25 122 610 24.0 0.136
550-5M-9 110 550 21.7 0.044 615-5M-9 123 615 24.2 0.049
550-5M-15 110 550 21.7 0.074 615-5M-15 123 615 24.2 0.082
550-5M-25 110 550 21.7 0.123 615-5M-25 123 615 24.2 0.137
560-5M-9 112 560 22.0 0.045 620-5M-9 124 620 24.4 0.050
560-5M-15 112 560 22.0 0.075 620-5M-15 124 620 24.4 0.083
560-5M-25 112 560 22.0 0.125 620-5M-25 124 620 24.4 0.139
565-5M-9 113 565 22.2 0.045 625-5M-9 125 625 24.6 0.050
565-5M-15 113 565 22.2 0.076 625-5M-15 125 625 24.6 0.084
565-5M-25 113 565 22.2 0.126 625-5M-25 125 625 24.6 0.140
570-5M-9 114 570 22.4 0.046 635-5M-9 127 635 25.0 0.051

34 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 700-5M-15  = 700 – 5M – 15

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

635-5M-15 127 635 25.0 0.085 700-5M-15 140 700 27.6 0.094
635-5M-25 127 635 25.0 0.142 700-5M-25 140 700 27.6 0.156
640-5M-9 128 640 25.2 0.051 710-5M-9 142 710 28.0 0.057
640-5M-15 128 640 25.2 0.086 710-5M-15 142 710 28.0 0.095
640-5M-25 128 640 25.2 0.143 710-5M-25 142 710 28.0 0.159
645-5M-9 129 645 25.4 0.052 720-5M-9 144 720 28.3 0.058
645-5M-15 129 645 25.4 0.086 720-5M-15 144 720 28.3 0.097
645-5M-25 129 645 25.4 0.144 720-5M-25 144 720 28.3 0.161
650-5M-9 130 650 25.6 0.052 725-5M-9 145 725 28.5 0.058
650-5M-15 130 650 25.6 0.087 725-5M-15 145 725 28.5 0.097
650-5M-25 130 650 25.6 0.145 725-5M-25 145 725 28.5 0.162
655-5M-9 131 655 25.8 0.053 740-5M-9 148 740 29.1 0.060
655-5M-15 131 655 25.8 0.088 740-5M-15 148 740 29.1 0.099
655-5M-25 131 655 25.8 0.146 740-5M-25 148 740 29.1 0.165
665-5M-9 133 665 26.2 0.053 750-5M-9 150 750 29.5 0.060
665-5M-15 133 665 26.2 0.089 750-5M-15 150 750 29.5 0.101
665-5M-25 133 665 26.2 0.149 750-5M-25 150 750 29.5 0.168
670-5M-9 134 670 26.4 0.054 755-5M-9 151 755 29.7 0.061
670-5M-15 134 670 26.4 0.090 755-5M-15 151 755 29.7 0.101
670-5M-25 134 670 26.4 0.150 755-5M-25 151 755 29.7 0.169
675-5M-9 135 675 26.6 0.054 770-5M-9 154 770 30.3 0.062
675-5M-15 135 675 26.6 0.090 770-5M-15 154 770 30.3 0.103
675-5M-25 135 675 26.6 0.151 770-5M-25 154 770 30.3 0.172
685-5M-9 137 685 27.0 0.055 775-5M-9 155 775 30.5 0.062
685-5M-15 137 685 27.0 0.092 775-5M-15 155 775 30.5 0.104
685-5M-25 137 685 27.0 0.153 775-5M-25 155 775 30.5 0.173
690-5M-9 138 690 27.2 0.056 780-5M-9 156 780 30.7 0.063
690-5M-15 138 690 27.2 0.093 780-5M-15 156 780 30.7 0.105
690-5M-25 138 690 27.2 0.154 780-5M-25 156 780 30.7 0.174
695-5M-9 139 695 27.4 0.056 790-5M-9 158 790 31.1 0.064
695-5M-15 139 695 27.4 0.093 790-5M-15 158 790 31.1 0.106
695-5M-25 139 695 27.4 0.155 790-5M-25 158 790 31.1 0.177
700-5M-9 140 700 27.6 0.056 800-5M-9 160 800 31.5 0.064

www.carlislebelts.com 35
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

800-5M-15 160 800 31.5 0.107 940-5M-15 188 940 37.0 0.126
800-5M-25 160 800 31.5 0.179 940-5M-25 188 940 37.0 0.210
825-5M-9 165 825 32.5 0.066 950-5M-9 190 950 37.4 0.076
825-5M-15 165 825 32.5 0.111 950-5M-15 190 950 37.4 0.127
825-5M-25 165 825 32.5 0.184 950-5M-25 190 950 37.4 0.212
835-5M-9 167 835 32.9 0.067 960-5M-9 192 960 37.8 0.077
835-5M-15 167 835 32.9 0.112 960-5M-15 192 960 37.8 0.129
835-5M-25 167 835 32.9 0.187 960-5M-25 192 960 37.8 0.215
850-5M-9 170 850 33.5 0.068 965-5M-9 193 965 38.0 0.078
850-5M-15 170 850 33.5 0.114 965-5M-15 193 965 38.0 0.129
850-5M-25 170 850 33.5 0.190 965-5M-25 193 965 38.0 0.216
860-5M-9 172 860 33.9 0.069 975-5M-9 195 975 38.4 0.078
860-5M-15 172 860 33.9 0.115 975-5M-15 195 975 38.4 0.131
860-5M-25 172 860 33.9 0.192 975-5M-25 195 975 38.4 0.218
870-5M-9 174 870 34.3 0.070 980-5M-9 196 980 38.6 0.079
870-5M-15 174 870 34.3 0.117 980-5M-15 196 980 38.6 0.131
870-5M-25 174 870 34.3 0.194 980-5M-25 196 980 38.6 0.219
890-5M-9 178 890 35.0 0.072 1000-5M-9 200 1000 39.4 0.080
890-5M-15 178 890 35.0 0.119 1000-5M-15 200 1000 39.4 0.134
890-5M-25 178 890 35.0 0.199 1000-5M-25 200 1000 39.4 0.223
900-5M-9 180 900 35.4 0.072 1025-5M-9 205 1025 40.4 0.082
900-5M-15 180 900 35.4 0.121 1025-5M-15 205 1025 40.4 0.137
900-5M-25 180 900 35.4 0.201 1025-5M-25 205 1025 40.4 0.229
920-5M-9 184 920 36.2 0.074 1050-5M-9 210 1050 41.3 0.084
920-5M-15 184 920 36.2 0.123 1050-5M-15 210 1050 41.3 0.141
920-5M-25 184 920 36.2 0.206 1050-5M-25 210 1050 41.3 0.235
925-5M-9 185 925 36.4 0.074 1100-5M-9 220 1100 43.3 0.088
925-5M-15 185 925 36.4 0.124 1100-5M-15 220 1100 43.3 0.147
925-5M-25 185 925 36.4 0.207 1100-5M-25 220 1100 43.3 0.246
935-5M-9 187 935 36.8 0.075 1115-5M-9 223 1115 43.9 0.090
935-5M-15 187 935 36.8 0.125 1115-5M-15 223 1115 43.9 0.149
935-5M-25 187 935 36.8 0.209 1115-5M-25 223 1115 43.9 0.249
940-5M-9 188 940 37.0 0.076 1125-5M-9 225 1125 44.3 0.090

36 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 1300-5M-25  = 1300 – 5M – 25

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)

1125-5M-15 225 1125 44.3 0.151 1300-5M-15 260 1300 51.2 0.174
1125-5M-25 225 1125 44.3 0.251 1300-5M-25 260 1300 51.2 0.290
1145-5M-9 229 1145 45.1 0.092 1340-5M-9 268 1340 52.8 0.108
1145-5M-15 229 1145 45.1 0.154 1340-5M-15 268 1340 52.8 0.180
1145-5M-25 229 1145 45.1 0.256 1340-5M-25 268 1340 52.8 0.299
1175-5M-9 235 1175 46.3 0.095 1350-5M-9 270 1350 53.1 0.109
1175-5M-15 235 1175 46.3 0.158 1350-5M-15 270 1350 53.1 0.181
1175-5M-25 235 1175 46.3 0.263 1350-5M-25 270 1350 53.1 0.302
1180-5M-9 236 1180 46.5 0.095 1375-5M-9 275 1375 54.1 0.111
1180-5M-15 236 1180 46.5 0.158 1375-5M-15 275 1375 54.1 0.184
1180-5M-25 236 1180 46.5 0.264 1375-5M-25 275 1375 54.1 0.307
1195-5M-9 239 1195 47.0 0.096 1420-5M-9 284 1420 55.9 0.114
1195-5M-15 239 1195 47.0 0.160 1420-5M-15 284 1420 55.9 0.190
1195-5M-25 239 1195 47.0 0.267 1420-5M-25 284 1420 55.9 0.317
1200-5M-9 240 1200 47.2 0.097 1450-5M-9 290 1450 57.1 0.117
1200-5M-15 240 1200 47.2 0.161 1450-5M-15 290 1450 57.1 0.194
1200-5M-25 240 1200 47.2 0.268 1450-5M-25 290 1450 57.1 0.324
1210-5M-9 242 1210 47.6 0.097 1500-5M-9 300 1500 59.1 0.121
1210-5M-15 242 1210 47.6 0.162 1500-5M-15 300 1500 59.1 0.201
1210-5M-25 242 1210 47.6 0.270 1500-5M-25 300 1500 59.1 0.335
1250-5M-9 250 1250 49.2 0.101 1595-5M-9 319 1595 62.8 0.128
1250-5M-15 250 1250 49.2 0.168 1595-5M-15 319 1595 62.8 0.214
1250-5M-25 250 1250 49.2 0.279 1595-5M-25 319 1595 62.8 0.356
1270-5M-9 254 1270 50.0 0.102 1600-5M-9 320 1600 63.0 0.129
1270-5M-15 254 1270 50.0 0.170 1600-5M-15 320 1600 63.0 0.215
1270-5M-25 254 1270 50.0 0.284 1600-5M-25 320 1600 63.0 0.358
1290-5M-9 258 1290 50.8 0.104 1685-5M-9 337 1685 66.3 0.136
1290-5M-15 258 1290 50.8 0.173 1685-5M-15 337 1685 66.3 0.226
1290-5M-25 258 1290 50.8 0.288 1685-5M-25 337 1685 66.3 0.377
1295-5M-9 259 1295 51.0 0.104 1690-5M-9 338 1690 66.5 0.136
1295-5M-15 259 1295 51.0 0.174 1690-5M-15 338 1690 66.5 0.227
1295-5M-25 259 1295 51.0 0.289 1690-5M-25 338 1690 66.5 0.378
1300-5M-9 260 1300 51.2 0.105 1790-5M-9 358 1790 70.5 0.144

www.carlislebelts.com 37
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
5M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (8mm)

1790-5M-15 358 1790 70.5 0.240 368-8M-30 46 368 14.5 0.133

1790-5M-25 358 1790 70.5 0.400 368-8M-50 46 368 14.5 0.222
1800-5M-9 360 1800 70.9 0.145 368-8M-85 46 368 14.5 0.378
1800-5M-15 360 1800 70.9 0.241 400-8M-20 50 400 15.7 0.097
1800-5M-25 360 1800 70.9 0.402 400-8M-30 50 400 15.7 0.145
1895-5M-9 379 1895 74.6 0.152 400-8M-50 50 400 15.7 0.242
1895-5M-15 379 1895 74.6 0.254 400-8M-85 50 400 15.7 0.411
1895-5M-25 379 1895 74.6 0.423 408-8M-20 51 408 16.1 0.099
2000-5M-9 400 2000 78.7 0.161 408-8M-30 51 408 16.1 0.148
2000-5M-15 400 2000 78.7 0.268 408-8M-50 51 408 16.1 0.246
2000-5M-25 400 2000 78.7 0.447 408-8M-85 51 408 16.1 0.419
2100-5M-9 420 2100 82.7 0.169 424-8M-20 53 424 16.7 0.102
2100-5M-15 420 2100 82.7 0.282 424-8M-30 53 424 16.7 0.154
2100-5M-25 420 2100 82.7 0.469 424-8M-50 53 424 16.7 0.256
2350-5M-9 470 2350 92.5 0.189 424-8M-85 53 424 16.7 0.435
2350-5M-15 470 2350 92.5 0.315 440-8M-20 55 440 17.3 0.106
2350-5M-25 470 2350 92.5 0.525 440-8M-30 55 440 17.3 0.159
2525-5M-9 505 2525 99.4 0.203 440-8M-50 55 440 17.3 0.266
2525-5M-15 505 2525 99.4 0.339 440-8M-85 55 440 17.3 0.452
2525-5M-25 505 2525 99.4 0.564 448-8M-20 56 448 17.6 0.108
2635-5M-9 527 2635 103.7 0.212 448-8M-30 56 448 17.6 0.162
2635-5M-15 527 2635 103.7 0.353 448-8M-50 56 448 17.6 0.271
2635-5M-25 527 2635 103.7 0.589 448-8M-85 56 448 17.6 0.460
4260-5M-9 852 4260 167.7 0.343 480-8M-20 60 480 18.9 0.116
4260-5M-15 852 4260 167.7 0.571 480-8M-30 60 480 18.9 0.174
4260-5M-25 852 4260 167.7 0.952 480-8M-50 60 480 18.9 0.290
8M Pitch – High Torque Synchronous (HTS) Sprockets: 480-8M-85 60 480 18.9 0.493
MPB, QD, Taper Bushed (8mm) 512-8M-20 64 512 20.2 0.124
320-8M-20 40 320 12.6 0.077 512-8M-30 64 512 20.2 0.186
320-8M-30 40 320 12.6 0.116 512-8M-50 64 512 20.2 0.309
320-8M-50 40 320 12.6 0.193 512-8M-85 64 512 20.2 0.526
320-8M-85 40 320 12.6 0.328 520-8M-20 65 520 20.5 0.126
368-8M-20 46 368 14.5 0.089 520-8M-30 65 520 20.5 0.188

38 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 600-8M-85  = 600 – 8M – 85

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

520-8M-50 65 520 20.5 0.314 600-8M-85 75 600 23.6 0.616

520-8M-85 65 520 20.5 0.534 608-8M-20 76 608 23.9 0.147
536-8M-20 67 536 21.1 0.129 608-8M-30 76 608 23.9 0.220
536-8M-30 67 536 21.1 0.194 608-8M-50 76 608 23.9 0.367
536-8M-50 67 536 21.1 0.324 608-8M-85 76 608 23.9 0.624
536-8M-85 67 536 21.1 0.550 624-8M-20 78 624 24.6 0.151
544-8M-20 68 544 21.4 0.131 624-8M-30 78 624 24.6 0.226
544-8M-30 68 544 21.4 0.197 624-8M-50 78 624 24.6 0.377
544-8M-50 68 544 21.4 0.328 624-8M-85 78 624 24.6 0.641
544-8M-85 68 544 21.4 0.558 632-8M-20 79 632 24.9 0.153
560-8M-20 70 560 22.0 0.135 632-8M-30 79 632 24.9 0.229
560-8M-30 70 560 22.0 0.203 632-8M-50 79 632 24.9 0.382
560-8M-50 70 560 22.0 0.338 632-8M-85 79 632 24.9 0.649
560-8M-85 70 560 22.0 0.575 640-8M-20 80 640 25.2 0.155
568-8M-20 71 568 22.4 0.137 640-8M-30 80 640 25.2 0.232
568-8M-30 71 568 22.4 0.206 640-8M-50 80 640 25.2 0.386
568-8M-50 71 568 22.4 0.343 640-8M-85 80 640 25.2 0.657
568-8M-85 71 568 22.4 0.583 648-8M-20 81 648 25.5 0.157
576-8M-20 72 576 22.7 0.139 648-8M-30 81 648 25.5 0.235
576-8M-30 72 576 22.7 0.209 648-8M-50 81 648 25.5 0.391
576-8M-50 72 576 22.7 0.348 648-8M-85 81 648 25.5 0.665
576-8M-85 72 576 22.7 0.591 656-8M-20 82 656 25.8 0.158
584-8M-20 73 584 23.0 0.141 656-8M-30 82 656 25.8 0.238
584-8M-30 73 584 23.0 0.212 656-8M-50 82 656 25.8 0.396
584-8M-50 73 584 23.0 0.353 656-8M-85 82 656 25.8 0.673
584-8M-85 73 584 23.0 0.599 680-8M-20 85 680 26.8 0.164
592-8M-20 74 592 23.3 0.143 680-8M-30 85 680 26.8 0.246
592-8M-30 74 592 23.3 0.214 680-8M-50 85 680 26.8 0.411
592-8M-50 74 592 23.3 0.357 680-8M-85 85 680 26.8 0.698
592-8M-85 74 592 23.3 0.608 688-8M-20 86 688 27.1 0.166
600-8M-20 75 600 23.6 0.145 688-8M-30 86 688 27.1 0.249
600-8M-30 75 600 23.6 0.217 688-8M-50 86 688 27.1 0.415
600-8M-50 75 600 23.6 0.362 688-8M-85 86 688 27.1 0.706

www.carlislebelts.com 39
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

696-8M-20 87 696 27.4 0.168 800-8M-30 100 800 31.5 0.290

696-8M-30 87 696 27.4 0.252 800-8M-50 100 800 31.5 0.483
696-8M-50 87 696 27.4 0.420 800-8M-85 100 800 31.5 0.821
696-8M-85 87 696 27.4 0.714 816-8M-20 102 816 32.1 0.197
712-8M-20 89 712 28.0 0.172 816-8M-30 102 816 32.1 0.296
712-8M-30 89 712 28.0 0.258 816-8M-50 102 816 32.1 0.493
712-8M-50 89 712 28.0 0.430 816-8M-85 102 816 32.1 0.838
712-8M-85 89 712 28.0 0.731 824-8M-20 103 824 32.4 0.199
720-8M-20 90 720 28.3 0.174 824-8M-30 103 824 32.4 0.299
720-8M-30 90 720 28.3 0.261 824-8M-50 103 824 32.4 0.498
720-8M-50 90 720 28.3 0.435 824-8M-85 103 824 32.4 0.846
720-8M-85 90 720 28.3 0.739 840-8M-20 105 840 33.1 0.203
760-8M-20 95 760 29.9 0.184 840-8M-30 105 840 33.1 0.304
760-8M-30 95 760 29.9 0.275 840-8M-50 105 840 33.1 0.507
760-8M-50 95 760 29.9 0.459 840-8M-85 105 840 33.1 0.862
760-8M-85 95 760 29.9 0.780 848-8M-20 106 848 33.4 0.205
768-8M-20 96 768 30.2 0.186 848-8M-30 106 848 33.4 0.307
768-8M-30 96 768 30.2 0.278 848-8M-50 106 848 33.4 0.512
768-8M-50 96 768 30.2 0.464 848-8M-85 106 848 33.4 0.870
768-8M-85 96 768 30.2 0.788 856-8M-20 107 856 33.7 0.207
776-8M-20 97 776 30.6 0.187 856-8M-30 107 856 33.7 0.310
776-8M-30 97 776 30.6 0.281 856-8M-50 107 856 33.7 0.517
776-8M-50 97 776 30.6 0.469 856-8M-85 107 856 33.7 0.879
776-8M-85 97 776 30.6 0.797 864-8M-20 108 864 34.0 0.209
784-8M-20 98 784 30.9 0.189 864-8M-30 108 864 34.0 0.313
784-8M-30 98 784 30.9 0.284 864-8M-50 108 864 34.0 0.522
784-8M-50 98 784 30.9 0.473 864-8M-85 108 864 34.0 0.887
784-8M-85 98 784 30.9 0.805 880-8M-20 110 880 34.6 0.213
792-8M-20 99 792 31.2 0.191 880-8M-30 110 880 34.6 0.319
792-8M-30 99 792 31.2 0.287 880-8M-50 110 880 34.6 0.531
792-8M-50 99 792 31.2 0.478 880-8M-85 110 880 34.6 0.903
792-8M-85 99 792 31.2 0.813 896-8M-20 112 896 35.3 0.216
800-8M-20 100 800 31.5 0.193 896-8M-30 112 896 35.3 0.325

40 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 1000-8M-50  = 1000 – 8M – 50

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

896-8M-50 112 896 35.3 0.541 968-8M-85 121 968 38.1 0.994
896-8M-85 112 896 35.3 0.920 976-8M-20 122 976 38.4 0.236
912-8M-20 114 912 35.9 0.220 976-8M-30 122 976 38.4 0.354
912-8M-30 114 912 35.9 0.330 976-8M-50 122 976 38.4 0.589
912-8M-50 114 912 35.9 0.551 976-8M-85 122 976 38.4 1.002
912-8M-85 114 912 35.9 0.936 1000-8M-20 125 1000 39.4 0.242
920-8M-20 115 920 36.2 0.222 1000-8M-30 125 1000 39.4 0.362
920-8M-30 115 920 36.2 0.333 1000-8M-50 125 1000 39.4 0.604
920-8M-50 115 920 36.2 0.556 1000-8M-85 125 1000 39.4 1.027
920-8M-85 115 920 36.2 0.944 1016-8M-20 127 1016 40.0 0.245
928-8M-20 116 928 36.5 0.224 1016-8M-30 127 1016 40.0 0.368
928-8M-30 116 928 36.5 0.336 1016-8M-50 127 1016 40.0 0.614
928-8M-50 116 928 36.5 0.560 1016-8M-85 127 1016 40.0 1.043
928-8M-85 116 928 36.5 0.953 1024-8M-20 128 1024 40.3 0.247
936-8M-20 117 936 36.9 0.226 1024-8M-30 128 1024 40.3 0.371
936-8M-30 117 936 36.9 0.339 1024-8M-50 128 1024 40.3 0.618
936-8M-50 117 936 36.9 0.565 1024-8M-85 128 1024 40.3 1.051
936-8M-85 117 936 36.9 0.961 1040-8M-20 130 1040 40.9 0.251
944-8M-20 118 944 37.2 0.228 1040-8M-30 130 1040 40.9 0.377
944-8M-30 118 944 37.2 0.342 1040-8M-50 130 1040 40.9 0.628
944-8M-50 118 944 37.2 0.570 1040-8M-85 130 1040 40.9 1.068
944-8M-85 118 944 37.2 0.969 1056-8M-20 132 1056 41.6 0.255
952-8M-20 119 952 37.5 0.230 1056-8M-30 132 1056 41.6 0.383
952-8M-30 119 952 37.5 0.345 1056-8M-50 132 1056 41.6 0.638
952-8M-50 119 952 37.5 0.575 1056-8M-85 132 1056 41.6 1.084
952-8M-85 119 952 37.5 0.977 1064-8M-20 133 1064 41.9 0.257
960-8M-20 120 960 37.8 0.232 1064-8M-30 133 1064 41.9 0.385
960-8M-30 120 960 37.8 0.348 1064-8M-50 133 1064 41.9 0.642
960-8M-50 120 960 37.8 0.580 1064-8M-85 133 1064 41.9 1.092
960-8M-85 120 960 37.8 0.985 1080-8M-20 135 1080 42.5 0.261
968-8M-20 121 968 38.1 0.234 1080-8M-30 135 1080 42.5 0.391
968-8M-30 121 968 38.1 0.351 1080-8M-50 135 1080 42.5 0.652
968-8M-50 121 968 38.1 0.585 1080-8M-85 135 1080 42.5 1.109

www.carlislebelts.com 41
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

1104-8M-20 138 1104 43.5 0.267 1200-8M-30 150 1200 47.2 0.435
1104-8M-30 138 1104 43.5 0.400 1200-8M-50 150 1200 47.2 0.725
1104-8M-50 138 1104 43.5 0.667 1200-8M-85 150 1200 47.2 1.232
1104-8M-85 138 1104 43.5 1.133 1208-8M-20 151 1208 47.6 0.292
1120-8M-20 140 1120 44.1 0.271 1208-8M-30 151 1208 47.6 0.438
1120-8M-30 140 1120 44.1 0.406 1208-8M-50 151 1208 47.6 0.729
1120-8M-50 140 1120 44.1 0.676 1208-8M-85 151 1208 47.6 1.240
1120-8M-85 140 1120 44.1 1.150 1216-8M-20 152 1216 47.9 0.294
1128-8M-20 141 1128 44.4 0.272 1216-8M-30 152 1216 47.9 0.441
1128-8M-30 141 1128 44.4 0.409 1216-8M-50 152 1216 47.9 0.734
1128-8M-50 141 1128 44.4 0.681 1216-8M-85 152 1216 47.9 1.248
1128-8M-85 141 1128 44.4 1.158 1224-8M-20 153 1224 48.2 0.296
1136-8M-20 142 1136 44.7 0.274 1224-8M-30 153 1224 48.2 0.443
1136-8M-30 142 1136 44.7 0.412 1224-8M-50 153 1224 48.2 0.739
1136-8M-50 142 1136 44.7 0.686 1224-8M-85 153 1224 48.2 1.256
1136-8M-85 142 1136 44.7 1.166 1240-8M-20 155 1240 48.8 0.300
1152-8M-20 144 1152 45.4 0.278 1240-8M-30 155 1240 48.8 0.449
1152-8M-30 144 1152 45.4 0.417 1240-8M-50 155 1240 48.8 0.749
1152-8M-50 144 1152 45.4 0.696 1240-8M-85 155 1240 48.8 1.273
1152-8M-85 144 1152 45.4 1.183 1248-8M-20 156 1248 49.1 0.301
1160-8M-20 145 1160 45.7 0.280 1248-8M-30 156 1248 49.1 0.452
1160-8M-30 145 1160 45.7 0.420 1248-8M-50 156 1248 49.1 0.754
1160-8M-50 145 1160 45.7 0.700 1248-8M-85 156 1248 49.1 1.281
1160-8M-85 145 1160 45.7 1.191 1256-8M-20 157 1256 49.4 0.303
1168-8M-20 146 1168 46.0 0.282 1256-8M-30 157 1256 49.4 0.455
1168-8M-30 146 1168 46.0 0.423 1256-8M-50 157 1256 49.4 0.758
1168-8M-50 146 1168 46.0 0.705 1256-8M-85 157 1256 49.4 1.289
1168-8M-85 146 1168 46.0 1.199 1264-8M-20 158 1264 49.8 0.305
1184-8M-20 148 1184 46.6 0.286 1264-8M-30 158 1264 49.8 0.458
1184-8M-30 148 1184 46.6 0.429 1264-8M-50 158 1264 49.8 0.763
1184-8M-50 148 1184 46.6 0.715 1264-8M-85 158 1264 49.8 1.298
1184-8M-85 148 1184 46.6 1.215 1272-8M-20 159 1272 50.1 0.307
1200-8M-20 150 1200 47.2 0.290 1272-8M-30 159 1272 50.1 0.461

42 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 1400-8M-50  = 1400 – 8M – 50

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

1272-8M-50 159 1272 50.1 0.768 1360-8M-85 170 1360 53.5 1.396
1272-8M-85 159 1272 50.1 1.306 1376-8M-20 172 1376 54.2 0.332
1280-8M-20 160 1280 50.4 0.309 1376-8M-30 172 1376 54.2 0.499
1280-8M-30 160 1280 50.4 0.464 1376-8M-50 172 1376 54.2 0.831
1280-8M-50 160 1280 50.4 0.773 1376-8M-85 172 1376 54.2 1.413
1280-8M-85 160 1280 50.4 1.314 1392-8M-20 174 1392 54.8 0.336
1304-8M-20 163 1304 51.3 0.315 1392-8M-30 174 1392 54.8 0.504
1304-8M-30 163 1304 51.3 0.472 1392-8M-50 174 1392 54.8 0.841
1304-8M-50 163 1304 51.3 0.787 1392-8M-85 174 1392 54.8 1.429
1304-8M-85 163 1304 51.3 1.339 1400-8M-20 175 1400 55.1 0.338
1312-8M-20 164 1312 51.7 0.317 1400-8M-30 175 1400 55.1 0.507
1312-8M-30 164 1312 51.7 0.475 1400-8M-50 175 1400 55.1 0.845
1312-8M-50 164 1312 51.7 0.792 1400-8M-85 175 1400 55.1 1.437
1312-8M-85 164 1312 51.7 1.347 1424-8M-20 178 1424 56.1 0.344
1320-8M-20 165 1320 52.0 0.319 1424-8M-30 178 1424 56.1 0.516
1320-8M-30 165 1320 52.0 0.478 1424-8M-50 178 1424 56.1 0.860
1320-8M-50 165 1320 52.0 0.797 1424-8M-85 178 1424 56.1 1.462
1320-8M-85 165 1320 52.0 1.355 1440-8M-20 180 1440 56.7 0.348
1328-8M-20 166 1328 52.3 0.321 1440-8M-30 180 1440 56.7 0.522
1328-8M-30 166 1328 52.3 0.481 1440-8M-50 180 1440 56.7 0.870
1328-8M-50 166 1328 52.3 0.802 1440-8M-85 180 1440 56.7 1.478
1328-8M-85 166 1328 52.3 1.363 1456-8M-20 182 1456 57.3 0.352
1344-8M-20 168 1344 52.9 0.325 1456-8M-30 182 1456 57.3 0.528
1344-8M-30 168 1344 52.9 0.487 1456-8M-50 182 1456 57.3 0.879
1344-8M-50 168 1344 52.9 0.812 1456-8M-85 182 1456 57.3 1.495
1344-8M-85 168 1344 52.9 1.380 1464-8M-20 183 1464 57.6 0.354
1352-8M-20 169 1352 53.2 0.327 1464-8M-30 183 1464 57.6 0.530
1352-8M-30 169 1352 53.2 0.490 1464-8M-50 183 1464 57.6 0.884
1352-8M-50 169 1352 53.2 0.816 1464-8M-85 183 1464 57.6 1.503
1352-8M-85 169 1352 53.2 1.388 1480-8M-20 185 1480 58.3 0.357
1360-8M-20 170 1360 53.5 0.328 1480-8M-30 185 1480 58.3 0.536
1360-8M-30 170 1360 53.5 0.493 1480-8M-50 185 1480 58.3 0.894
1360-8M-50 170 1360 53.5 0.821 1480-8M-85 185 1480 58.3 1.519

www.carlislebelts.com 43
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

1512-8M-20 189 1512 59.5 0.365 1648-8M-30 206 1648 64.9 0.597
1512-8M-30 189 1512 59.5 0.548 1648-8M-50 206 1648 64.9 0.995
1512-8M-50 189 1512 59.5 0.913 1648-8M-85 206 1648 64.9 1.692
1512-8M-85 189 1512 59.5 1.552 1680-8M-20 210 1680 66.1 0.406
1520-8M-20 190 1520 59.8 0.367 1680-8M-30 210 1680 66.1 0.609
1520-8M-30 190 1520 59.8 0.551 1680-8M-50 210 1680 66.1 1.014
1520-8M-50 190 1520 59.8 0.918 1680-8M-85 210 1680 66.1 1.725
1520-8M-85 190 1520 59.8 1.560 1696-8M-20 212 1696 66.8 0.410
1552-8M-20 194 1552 61.1 0.375 1696-8M-30 212 1696 66.8 0.614
1552-8M-30 194 1552 61.1 0.562 1696-8M-50 212 1696 66.8 1.024
1552-8M-50 194 1552 61.1 0.937 1696-8M-85 212 1696 66.8 1.741
1552-8M-85 194 1552 61.1 1.593 1728-8M-20 216 1728 68.0 0.417
1560-8M-20 195 1560 61.4 0.377 1728-8M-30 216 1728 68.0 0.626
1560-8M-30 195 1560 61.4 0.565 1728-8M-50 216 1728 68.0 1.043
1560-8M-50 195 1560 61.4 0.942 1728-8M-85 216 1728 68.0 1.774
1560-8M-85 195 1560 61.4 1.601 1744-8M-20 218 1744 68.7 0.421
1576-8M-20 197 1576 62.0 0.381 1744-8M-30 218 1744 68.7 0.632
1576-8M-30 197 1576 62.0 0.571 1744-8M-50 218 1744 68.7 1.053
1576-8M-50 197 1576 62.0 0.952 1744-8M-85 218 1744 68.7 1.790
1576-8M-85 197 1576 62.0 1.618 1752-8M-20 219 1752 69.0 0.423
1584-8M-20 198 1584 62.4 0.383 1752-8M-30 219 1752 69.0 0.635
1584-8M-30 198 1584 62.4 0.574 1752-8M-50 219 1752 69.0 1.058
1584-8M-50 198 1584 62.4 0.956 1752-8M-85 219 1752 69.0 1.798
1584-8M-85 198 1584 62.4 1.626 1760-8M-20 220 1760 69.3 0.425
1600-8M-20 200 1600 63.0 0.386 1760-8M-30 220 1760 69.3 0.638
1600-8M-30 200 1600 63.0 0.580 1760-8M-50 220 1760 69.3 1.063
1600-8M-50 200 1600 63.0 0.966 1760-8M-85 220 1760 69.3 1.807
1600-8M-85 200 1600 63.0 1.642 1784-8M-20 223 1784 70.2 0.431
1640-8M-20 205 1640 64.6 0.396 1784-8M-30 223 1784 70.2 0.646
1640-8M-30 205 1640 64.6 0.594 1784-8M-50 223 1784 70.2 1.077
1640-8M-50 205 1640 64.6 0.990 1784-8M-85 223 1784 70.2 1.831
1640-8M-85 205 1640 64.6 1.684 1792-8M-20 224 1792 70.6 0.433
1648-8M-20 206 1648 64.9 0.398 1792-8M-30 224 1792 70.6 0.649

44 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 2000-8M-50  = 2000 – 8M – 50

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

1792-8M-50 224 1792 70.6 1.082 1936-8M-85 242 1936 76.2 1.987
1792-8M-85 224 1792 70.6 1.840 1952-8M-20 244 1952 76.9 0.471
1800-8M-20 225 1800 70.9 0.435 1952-8M-30 244 1952 76.9 0.707
1800-8M-30 225 1800 70.9 0.652 1952-8M-50 244 1952 76.9 1.179
1800-8M-50 225 1800 70.9 1.087 1952-8M-85 244 1952 76.9 2.004
1800-8M-85 225 1800 70.9 1.848 1992-8M-20 249 1992 78.4 0.481
1840-8M-20 230 1840 72.4 0.444 1992-8M-30 249 1992 78.4 0.722
1840-8M-30 230 1840 72.4 0.667 1992-8M-50 249 1992 78.4 1.203
1840-8M-50 230 1840 72.4 1.111 1992-8M-85 249 1992 78.4 2.045
1840-8M-85 230 1840 72.4 1.889 2000-8M-20 250 2000 78.7 0.483
1856-8M-20 232 1856 73.1 0.448 2000-8M-30 250 2000 78.7 0.725
1856-8M-30 232 1856 73.1 0.672 2000-8M-50 250 2000 78.7 1.208
1856-8M-50 232 1856 73.1 1.121 2000-8M-85 250 2000 78.7 2.053
1856-8M-85 232 1856 73.1 1.905 2056-8M-20 257 2056 80.9 0.497
1896-8M-20 237 1896 74.6 0.458 2056-8M-30 257 2056 80.9 0.745
1896-8M-30 237 1896 74.6 0.687 2056-8M-50 257 2056 80.9 1.241
1896-8M-50 237 1896 74.6 1.145 2056-8M-85 257 2056 80.9 2.111
1896-8M-85 237 1896 74.6 1.946 2080-8M-20 260 2080 81.9 0.502
1904-8M-20 238 1904 75.0 0.460 2080-8M-30 260 2080 81.9 0.754
1904-8M-30 238 1904 75.0 0.690 2080-8M-50 260 2080 81.9 1.256
1904-8M-50 238 1904 75.0 1.150 2080-8M-85 260 2080 81.9 2.135
1904-8M-85 238 1904 75.0 1.955 2104-8M-20 263 2104 82.8 0.508
1920-8M-20 240 1920 75.6 0.464 2104-8M-30 263 2104 82.8 0.762
1920-8M-30 240 1920 75.6 0.696 2104-8M-50 263 2104 82.8 1.270
1920-8M-50 240 1920 75.6 1.159 2104-8M-85 263 2104 82.8 2.160
1920-8M-85 240 1920 75.6 1.971 2136-8M-20 267 2136 84.1 0.516
1928-8M-20 241 1928 75.9 0.466 2136-8M-30 267 2136 84.1 0.774
1928-8M-30 241 1928 75.9 0.699 2136-8M-50 267 2136 84.1 1.290
1928-8M-50 241 1928 75.9 1.164 2136-8M-85 267 2136 84.1 2.193
1928-8M-85 241 1928 75.9 1.979 2160-8M-20 270 2160 85.0 0.522
1936-8M-20 242 1936 76.2 0.468 2160-8M-30 270 2160 85.0 0.783
1936-8M-30 242 1936 76.2 0.701 2160-8M-50 270 2160 85.0 1.304
1936-8M-50 242 1936 76.2 1.169 2160-8M-85 270 2160 85.0 2.217

www.carlislebelts.com 45
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

2208-8M-20 276 2208 86.9 0.533 2584-8M-30 323 2584 101.7 0.936
2208-8M-30 276 2208 86.9 0.800 2584-8M-50 323 2584 101.7 1.560
2208-8M-50 276 2208 86.9 1.333 2584-8M-85 323 2584 101.7 2.653
2208-8M-85 276 2208 86.9 2.267 2600-8M-20 325 2600 102.4 0.628
2240-8M-20 280 2240 88.2 0.541 2600-8M-30 325 2600 102.4 0.942
2240-8M-30 280 2240 88.2 0.812 2600-8M-50 325 2600 102.4 1.570
2240-8M-50 280 2240 88.2 1.353 2600-8M-85 325 2600 102.4 2.669
2240-8M-85 280 2240 88.2 2.299 2656-8M-20 332 2656 104.6 0.642
2272-8M-20 284 2272 89.4 0.549 2656-8M-30 332 2656 104.6 0.962
2272-8M-30 284 2272 89.4 0.823 2656-8M-50 332 2656 104.6 1.604
2272-8M-50 284 2272 89.4 1.372 2656-8M-85 332 2656 104.6 2.726
2272-8M-85 284 2272 89.4 2.332 2736-8M-20 342 2736 107.7 0.661
2304-8M-20 288 2304 90.7 0.557 2736-8M-30 342 2736 107.7 0.991
2304-8M-30 288 2304 90.7 0.835 2736-8M-50 342 2736 107.7 1.652
2304-8M-50 288 2304 90.7 1.391 2736-8M-85 342 2736 107.7 2.809
2304-8M-85 288 2304 90.7 2.365 2800-8M-20 350 2800 110.2 0.676
2328-8M-20 291 2328 91.7 0.562 2800-8M-30 350 2800 110.2 1.014
2328-8M-30 291 2328 91.7 0.843 2800-8M-50 350 2800 110.2 1.691
2328-8M-50 291 2328 91.7 1.406 2800-8M-85 350 2800 110.2 2.874
2328-8M-85 291 2328 91.7 2.390 3048-8M-20 381 3048 120.0 0.736
2392-8M-20 299 2392 94.2 0.578 3048-8M-30 381 3048 120.0 1.104
2392-8M-30 299 2392 94.2 0.867 3048-8M-50 381 3048 120.0 1.841
2392-8M-50 299 2392 94.2 1.444 3048-8M-85 381 3048 120.0 3.129
2392-8M-85 299 2392 94.2 2.455 3120-8M-20 390 3120 122.8 0.754
2400-8M-20 300 2400 94.5 0.580 3120-8M-30 390 3120 122.8 1.130
2400-8M-30 300 2400 94.5 0.870 3120-8M-50 390 3120 122.8 1.884
2400-8M-50 300 2400 94.5 1.449 3120-8M-85 390 3120 122.8 3.203
2400-8M-85 300 2400 94.5 2.464 3168-8M-20 396 3168 124.7 0.765
2504-8M-20 313 2504 98.6 0.605 3168-8M-30 396 3168 124.7 1.148
2504-8M-30 313 2504 98.6 0.907 3168-8M-50 396 3168 124.7 1.913
2504-8M-50 313 2504 98.6 1.512 3168-8M-85 396 3168 124.7 3.252
2504-8M-85 313 2504 98.6 2.570 3200-8M-20 400 3200 126.0 0.773
2584-8M-20 323 2584 101.7 0.624 3200-8M-30 400 3200 126.0 1.159

46 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 3200-8M-50  = 3200 – 8M – 50

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
8M Pitch – High Torque Synchronous (HTS) Sprockets: 8M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (8mm) MPB, QD, Taper Bushed (8mm)

3200-8M-50 400 3200 126.0 1.932 5576-8M-85 697 5576 219.5 5.724
3200-8M-85 400 3200 126.0 3.285 5600-8M-20 700 5600 220.5 1.353
3280-8M-20 410 3280 129.1 0.792 5600-8M-30 700 5600 220.5 2.029
3280-8M-30 410 3280 129.1 1.188 5600-8M-50 700 5600 220.5 3.382
3280-8M-50 410 3280 129.1 1.981 5600-8M-85 700 5600 220.5 5.749
3280-8M-85 410 3280 129.1 3.367 5960-8M-20 745 5960 234.6 1.440
3400-8M-20 425 3400 133.9 0.821 5960-8M-30 745 5960 234.6 2.159
3400-8M-30 425 3400 133.9 1.232 5960-8M-50 745 5960 234.6 3.599
3400-8M-50 425 3400 133.9 2.053 5960-8M-85 745 5960 234.6 6.118
3400-8M-85 425 3400 133.9 3.490 14M Pitch – High Torque Synchronous (HTS) Sprockets:
3600-8M-20 450 3600 141.7 0.870 MPB, QD, Taper Bushed (14mm)

3600-8M-30 450 3600 141.7 1.304 966-14M-40 69 966 38.0 0.757

3600-8M-50 450 3600 141.7 2.174 966-14M-55 69 966 38.0 1.040
3600-8M-85 450 3600 141.7 3.696 966-14M-85 69 966 38.0 1.608
3824-8M-20 478 3824 150.6 0.924 966-14M-115 69 966 38.0 2.175
3824-8M-30 478 3824 150.6 1.385 966-14M-170 69 966 38.0 3.216
3824-8M-50 478 3824 150.6 2.309 1036-14M-40 74 1036 40.8 0.812
3824-8M-85 478 3824 150.6 3.925 1036-14M-55 74 1036 40.8 1.116
4000-8M-20 500 4000 157.5 0.966 1036-14M-85 74 1036 40.8 1.724
4000-8M-30 500 4000 157.5 1.449 1036-14M-115 74 1036 40.8 2.333
4000-8M-50 500 4000 157.5 2.415 1036-14M-170 74 1036 40.8 3.449
4000-8M-85 500 4000 157.5 4.106 1092-14M-40 78 1092 43.0 0.855
4400-8M-20 550 4400 173.2 1.063 1092-14M-55 78 1092 43.0 1.176
4400-8M-30 550 4400 173.2 1.594 1092-14M-85 78 1092 43.0 1.818
4400-8M-50 550 4400 173.2 2.657 1092-14M-115 78 1092 43.0 2.459
4400-8M-85 550 4400 173.2 4.517 1092-14M-170 78 1092 43.0 3.635
5120-8M-20 640 5120 201.6 1.237 1120-14M-40 80 1120 44.1 0.877
5120-8M-30 640 5120 201.6 1.855 1120-14M-55 80 1120 44.1 1.206
5120-8M-50 640 5120 201.6 3.092 1120-14M-85 80 1120 44.1 1.864
5120-8M-85 640 5120 201.6 5.256 1120-14M-115 80 1120 44.1 2.522
5576-8M-20 697 5576 219.5 1.347 1120-14M-170 80 1120 44.1 3.729
5576-8M-30 697 5576 219.5 2.020 1148-14M-40 82 1148 45.2 0.899
5576-8M-50 697 5576 219.5 3.367 1148-14M-55 82 1148 45.2 1.236

www.carlislebelts.com 47
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
14M Pitch – High Torque Synchronous (HTS) Sprockets: 14M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (14mm) MPB, QD, Taper Bushed (14mm)

1148-14M-85 82 1148 45.2 1.911 1442-14M-40 103 1442 56.8 1.130

1148-14M-115 82 1148 45.2 2.585 1442-14M-55 103 1442 56.8 1.553
1148-14M-170 82 1148 45.2 3.822 1442-14M-85 103 1442 56.8 2.400
1190-14M-40 85 1190 46.9 0.932 1442-14M-115 103 1442 56.8 3.247
1190-14M-55 85 1190 46.9 1.282 1442-14M-170 103 1442 56.8 4.800
1190-14M-85 85 1190 46.9 1.981 1456-14M-40 104 1456 57.3 1.140
1190-14M-115 85 1190 46.9 2.680 1456-14M-55 104 1456 57.3 1.568
1190-14M-170 85 1190 46.9 3.962 1456-14M-85 104 1456 57.3 2.424
1246-14M-40 89 1246 49.1 0.976 1456-14M-115 104 1456 57.3 3.279
1246-14M-55 89 1246 49.1 1.342 1456-14M-170 104 1456 57.3 4.847
1246-14M-85 89 1246 49.1 2.074 1470-14M-40 105 1470 57.9 1.151
1246-14M-115 89 1246 49.1 2.806 1470-14M-55 105 1470 57.9 1.583
1246-14M-170 89 1246 49.1 4.148 1470-14M-85 105 1470 57.9 2.447
1260-14M-40 90 1260 49.6 0.987 1470-14M-115 105 1470 57.9 3.310
1260-14M-55 90 1260 49.6 1.357 1470-14M-170 105 1470 57.9 4.894
1260-14M-85 90 1260 49.6 2.097 1540-14M-40 110 1540 60.6 1.206
1260-14M-115 90 1260 49.6 2.838 1540-14M-55 110 1540 60.6 1.659
1260-14M-170 90 1260 49.6 4.195 1540-14M-85 110 1540 60.6 2.563
1316-14M-40 94 1316 51.8 1.031 1540-14M-115 110 1540 60.6 3.468
1316-14M-55 94 1316 51.8 1.417 1540-14M-170 110 1540 60.6 5.127
1316-14M-85 94 1316 51.8 2.191 1568-14M-40 112 1568 61.7 1.228
1316-14M-115 94 1316 51.8 2.964 1568-14M-55 112 1568 61.7 1.689
1316-14M-170 94 1316 51.8 4.381 1568-14M-85 112 1568 61.7 2.610
1344-14M-40 96 1344 52.9 1.053 1568-14M-115 112 1568 61.7 3.531
1344-14M-55 96 1344 52.9 1.448 1568-14M-170 112 1568 61.7 5.220
1344-14M-85 96 1344 52.9 2.237 1610-14M-40 115 1610 63.4 1.261
1344-14M-115 96 1344 52.9 3.027 1610-14M-55 115 1610 63.4 1.734
1344-14M-170 96 1344 52.9 4.474 1610-14M-85 115 1610 63.4 2.680
1400-14M-40 100 1400 55.1 1.097 1610-14M-115 115 1610 63.4 3.626
1400-14M-55 100 1400 55.1 1.508 1610-14M-170 115 1610 63.4 5.360
1400-14M-85 100 1400 55.1 2.330 1652-14M-40 118 1652 65.0 1.294
1400-14M-115 100 1400 55.1 3.153 1652-14M-55 118 1652 65.0 1.779
1400-14M-170 100 1400 55.1 4.661 1652-14M-85 118 1652 65.0 2.750

48 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 2100-14M-40  = 2100 – 14M – 40

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)

Synchronous Belts
14M Pitch – High Torque Synchronous (HTS) Sprockets: 14M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (14mm) MPB, QD, Taper Bushed (14mm)

1652-14M-115 118 1652 65.0 3.720 1890-14M-55 135 1890 74.4 2.036
1652-14M-170 118 1652 65.0 5.500 1890-14M-85 135 1890 74.4 3.146
1750-14M-40 125 1750 68.9 1.371 1890-14M-115 135 1890 74.4 4.256
1750-14M-55 125 1750 68.9 1.885 1890-14M-170 135 1890 74.4 6.292
1750-14M-85 125 1750 68.9 2.913 1932-14M-40 138 1932 76.1 1.513
1750-14M-115 125 1750 68.9 3.941 1932-14M-55 138 1932 76.1 2.081
1750-14M-170 125 1750 68.9 5.826 1932-14M-85 138 1932 76.1 3.216
1764-14M-40 126 1764 69.4 1.382 1932-14M-115 138 1932 76.1 4.351
1764-14M-55 126 1764 69.4 1.900 1932-14M-170 138 1932 76.1 6.432
1764-14M-85 126 1764 69.4 2.936 1960-14M-40 140 1960 77.2 1.535
1764-14M-115 126 1764 69.4 3.973 1960-14M-55 140 1960 77.2 2.111
1764-14M-170 126 1764 69.4 5.872 1960-14M-85 140 1960 77.2 3.262
1778-14M-40 127 1778 70.0 1.393 1960-14M-115 140 1960 77.2 4.414
1778-14M-55 127 1778 70.0 1.915 1960-14M-170 140 1960 77.2 6.525
1778-14M-85 127 1778 70.0 2.960 2100-14M-40 150 2100 82.7 1.645
1778-14M-115 127 1778 70.0 4.004 2100-14M-55 150 2100 82.7 2.262
1778-14M-170 127 1778 70.0 5.919 2100-14M-85 150 2100 82.7 3.495
1792-14M-40 128 1792 70.6 1.404 2100-14M-115 150 2100 82.7 4.729
1792-14M-55 128 1792 70.6 1.930 2100-14M-170 150 2100 82.7 6.991
1792-14M-85 128 1792 70.6 2.983 2240-14M-40 160 2240 88.2 1.755
1792-14M-115 128 1792 70.6 4.036 2240-14M-55 160 2240 88.2 2.413
1792-14M-170 128 1792 70.6 5.966 2240-14M-85 160 2240 88.2 3.729
1806-14M-40 129 1806 71.1 1.415 2240-14M-115 160 2240 88.2 5.044
1806-14M-55 129 1806 71.1 1.945 2240-14M-170 160 2240 88.2 7.457
1806-14M-85 129 1806 71.1 3.006 2310-14M-40 165 2310 90.9 1.809
1806-14M-115 129 1806 71.1 4.067 2310-14M-55 165 2310 90.9 2.488
1806-14M-170 129 1806 71.1 6.012 2310-14M-85 165 2310 90.9 3.845
1820-14M-40 130 1820 71.7 1.426 2310-14M-115 165 2310 90.9 5.202
1820-14M-55 130 1820 71.7 1.960 2310-14M-170 165 2310 90.9 7.690
1820-14M-85 130 1820 71.7 3.029 2450-14M-40 175 2450 96.5 1.919
1820-14M-115 130 1820 71.7 4.099 2450-14M-55 175 2450 96.5 2.639
1820-14M-170 130 1820 71.7 6.059 2450-14M-85 175 2450 96.5 4.078
1890-14M-40 135 1890 74.4 1.480 2450-14M-115 175 2450 96.5 5.517

www.carlislebelts.com 49
 Synchro-Cog HT
®

Synchronous Drive Belt

Synchro-Cog HT ®

Part Numbers
Part Number Pitch Length Weight Part Number Pitch Length Weight
Number Of Teeth (lbs) Number Of Teeth (lbs)
(mm) (in) (mm) (in)
14M Pitch – High Torque Synchronous (HTS) Sprockets: 14M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (14mm) MPB, QD, Taper Bushed (14mm)

2450-14M-170 175 2450 96.5 8.156 3360-14M-85 240 3360 132.3 5.593
2590-14M-40 185 2590 102.0 2.029 3360-14M-115 240 3360 132.3 7.567
2590-14M-55 185 2590 102.0 2.790 3360-14M-170 240 3360 132.3 11.186
2590-14M-85 185 2590 102.0 4.311 3500-14M-40 250 3500 137.8 2.742
2590-14M-115 185 2590 102.0 5.833 3500-14M-55 250 3500 137.8 3.770
2590-14M-170 185 2590 102.0 8.622 3500-14M-85 250 3500 137.8 5.826
2660-14M-40 190 2660 104.7 2.084 3500-14M-115 250 3500 137.8 7.882
2660-14M-55 190 2660 104.7 2.865 3500-14M-170 250 3500 137.8 11.652
2660-14M-85 190 2660 104.7 4.428 3668-14M-40 262 3668 144.4 2.873
2660-14M-115 190 2660 104.7 5.990 3668-14M-55 262 3668 144.4 3.951
2660-14M-170 190 2660 104.7 8.855 3668-14M-85 262 3668 144.4 6.105
2800-14M-40 200 2800 110.2 2.193 3668-14M-115 262 3668 144.4 8.260
2800-14M-55 200 2800 110.2 3.016 3668-14M-170 262 3668 144.4 12.211
2800-14M-85 200 2800 110.2 4.661 3850-14M-40 275 3850 151.6 3.016
2800-14M-115 200 2800 110.2 6.306 3850-14M-55 275 3850 151.6 4.147
2800-14M-170 200 2800 110.2 9.321 3850-14M-85 275 3850 151.6 6.408
3108-14M-40 222 3108 122.4 2.435 3850-14M-115 275 3850 151.6 8.670
3108-14M-55 222 3108 122.4 3.347 3850-14M-170 275 3850 151.6 12.817
3108-14M-85 222 3108 122.4 5.173 4326-14M-40 309 4326 170.3 3.389
3108-14M-115 222 3108 122.4 6.999 4326-14M-55 309 4326 170.3 4.659
3108-14M-170 222 3108 122.4 10.347 4326-14M-85 309 4326 170.3 7.201
3150-14M-40 225 3150 124.0 2.467 4326-14M-115 309 4326 170.3 9.742
3150-14M-55 225 3150 124.0 3.393 4326-14M-170 309 4326 170.3 14.401
3150-14M-85 225 3150 124.0 5.243 4536-14M-40 324 4536 178.6 3.553
3150-14M-115 225 3150 124.0 7.094 4536-14M-55 324 4536 178.6 4.885
3150-14M-170 225 3150 124.0 10.486 4536-14M-85 324 4536 178.6 7.550
3304-14M-40 236 3304 130.1 2.588 4536-14M-115 324 4536 178.6 10.215
3304-14M-55 236 3304 130.1 3.559 4536-14M-170 324 4536 178.6 15.101
3304-14M-85 236 3304 130.1 5.500 4578-14M-40 327 4578 180.2 3.586
3304-14M-115 236 3304 130.1 7.441 4578-14M-55 327 4578 180.2 4.931
3304-14M-170 236 3304 130.1 10.999 4578-14M-85 327 4578 180.2 7.620
3360-14M-40 240 3360 132.3 2.632 4578-14M-115 327 4578 180.2 10.310
3360-14M-55 240 3360 132.3 3.619 4578-14M-170 327 4578 180.2 15.240

50 www.carlislebelts.com
 Synchro-Cog HT
®

Synchronous Drive Belt

Part Number Example: 3500-14M-55  = 3500 – 14M – 55

| | |
Pitch Length Tooth Pitch Width
(millimeters) (HTD profile) (millimeters)

Part Number Pitch Length Weight

Number Of Teeth (lbs)
(mm) (in)

Synchronous Belts
14M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (14mm)

4956-14M-40 354 4956 195.1 3.882

4956-14M-55 354 4956 195.1 5.338
4956-14M-85 354 4956 195.1 8.249
4956-14M-115 354 4956 195.1 11.161
4956-14M-170 354 4956 195.1 16.499
5320-14M-40 380 5320 209.4 4.167
5320-14M-55 380 5320 209.4 5.730
5320-14M-85 380 5320 209.4 8.855
5320-14M-115 380 5320 209.4 11.981
5320-14M-170 380 5320 209.4 17.710
5740-14M-40 410 5740 226.0 4.496
5740-14M-55 410 5740 226.0 6.182
5740-14M-85 410 5740 226.0 9.554
5740-14M-115 410 5740 226.0 12.926
5740-14M-170 410 5740 226.0 19.109
6160-14M-40 440 6160 242.5 4.825
6160-14M-55 440 6160 242.5 6.635
6160-14M-85 440 6160 242.5 10.253
6160-14M-115 440 6160 242.5 13.872
6160-14M-170 440 6160 242.5 20.507
6860-14M-40 490 6860 270.1 5.373
6860-14M-55 490 6860 270.1 7.389
6860-14M-85 490 6860 270.1 11.419
6860-14M-115 490 6860 270.1 15.449
6860-14M-170 490 6860 270.1 22.837

www.carlislebelts.com 51
 Synchro-Cog HT
®

Sleeves

Synchro-Cog HT Sleeve ®

Part Numbers
■ Full factory width sleeves Part Sleeve Width Sleeve Weight
Number (mm) (lbs)
■ All sleeves will have the edges trimmed
before shipment 3M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (3mm)
■ Cut sleeves cannot be accepted for return
■ All weights are approximate 144-3M-100SL 100 0.078
150-3M-160SL 160 0.130
159-3M-200SL 200 0.172
Timken maintains inventory of most Carlisle® sleeve sizes. 168-3M-200SL 200 0.182
Non-stock sizes will be indicated by an asterisk following 177-3M-200SL 200 0.192
the part number. Contact customer service for availability. 180-3M-200SL 200 0.195
Minimum order quantity and/or extended lead times may 186-3M-160SL 160 0.161
apply.
189-3M-160SL 160 0.164
Occasional production inconsistencies which may render a 192-3M-160SL 160 0.166
portion of the sleeve unusable can be present as a normal 201-3M-200SL 200 0.218
part of the production process.
207-3M-200SL 200 0.224
Each sleeve is inspected to ensure that it contains 90% 210-3M-200SL 200 0.227
or more usable product. A full width sleeve with less than
213-3M-200SL 200 0.231
10% unusable product is considered acceptable.
222-3M-200SL 200 0.240
225-3M-200SL 200 0.244
228-3M-200SL 200 0.247
234-3M-200SL 200 0.253
240-3M-200SL 200 0.260
252-3M-450SL 450 0.614
255-3M-450SL 450 0.621
264-3M-450SL 450 0.643
267-3M-450SL 450 0.650
276-3M-450SL 450 0.672
285-3M-450SL 450 0.694
300-3M-450SL 450 0.731
312-3M-450SL 450 0.760
318-3M-450SL 450 0.775
324-3M-450SL 450 0.789
330-3M-450SL 450 0.804
339-3M-450SL 450 0.826
357-3M-450SL 450 0.870
360-3M-450SL 450 0.877
363-3M-450SL 450 0.884

52 www.carlislebelts.com
 Synchro-Cog HT
®

Sleeves

Part Number Example: 375-3M-450SL  = 375 – 3M – 450 SL

| | | |
Pitch Length Tooth Pitch Width Sleeve
(millimeters) (HTD profile) (millimeters)

Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

Synchronous Belts
3M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (3mm) MPB, QD, Taper Bushed (5mm)

375-3M-450SL 450 0.913 235-5M-200SL 200 0.420

384-3M-450SL 450 0.935 245-5M-450SL 450 0.985
390-3M-450SL 450 0.950 250-5M-450SL 450 1.005
405-3M-450SL 450 0.987 255-5M-200SL 200 0.456
420-3M-450SL 450 1.023 260-5M-450SL 450 1.046
447-3M-450SL 450 1.089 265-5M-450SL 450 1.066
456-3M-450SL 450 1.111 270-5M-450SL 450 1.086
474-3M-450SL 450 1.155 275-5M-450SL 450 1.106
483-3M-450SL 450 1.177 280-5M-450SL 450 1.126
495-3M-450SL 450 1.206 285-5M-450SL 450 1.146
501-3M-450SL 450 1.220 290-5M-450SL 450 1.166
513-3M-450SL 450 1.250 295-5M-450SL 450 1.186
522-3M-450SL 450 1.272 300-5M-450SL 450 1.207
531-3M-450SL 450 1.293 305-5M-450SL 450 1.227
564-3M-200SL 200 0.611 310-5M-450SL 450 1.247
570-3M-450SL 450 1.388 320-5M-450SL 450 1.287
582-3M-200SL 200 0.630 325-5M-450SL 450 1.307
600-3M-450SL 450 1.462 330-5M-450SL 450 1.327
633-3M-450SL 450 1.542 340-5M-450SL 450 1.367
711-3M-450SL 450 1.732 345-5M-450SL 450 1.388
735-3M-450SL 450 1.790 350-5M-450SL 450 1.408
750-3M-450SL 450 1.827 360-5M-450SL 450 1.448
804-3M-450SL 450 1.959 365-5M-450SL 450 1.468
1026-3M-450SL 450 2.499 370-5M-450SL 450 1.488
1401-3M-200SL 200 1.517 375-5M-450SL 450 1.508
5M Pitch – High Torque Synchronous (HTS) Sprockets: 380-5M-450SL 450 1.528
MPB, QD, Taper Bushed (5mm) 385-5M-450SL 450 1.548
180-5M-200SL 200 0.322 390-5M-450SL 450 1.569
200-5M-200SL 200 0.358 395-5M-450SL 450 1.589
210-5M-200SL 200 0.375 400-5M-450SL 450 1.609
215-5M-200SL 200 0.384 405-5M-450SL 450 1.629
225-5M-200SL 200 0.402 410-5M-450SL 450 1.649
230-5M-450SL 450 0.925 420-5M-450SL 450 1.689

www.carlislebelts.com 53
 Synchro-Cog HT
®

Sleeves

Synchro-Cog HT Sleeve ®

Part Numbers
Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)
425-5M-450SL 450 1.709 625-5M-450SL 450 2.514
430-5M-450SL 450 1.729 635-5M-450SL 450 2.554
435-5M-450SL 450 1.750 640-5M-450SL 450 2.574
440-5M-450SL 450 1.770 645-5M-450SL 450 2.594
445-5M-450SL 450 1.790 650-5M-450SL 450 2.614
450-5M-450SL 450 1.810 655-5M-450SL 450 2.634
460-5M-450SL 450 1.850 665-5M-450SL 450 2.675
465-5M-450SL 450 1.870 670-5M-450SL 450 2.695
470-5M-450SL 450 1.890 675-5M-450SL 450 2.715
475-5M-450SL 450 1.910 685-5M-450SL 450 2.755
480-5M-450SL 450 1.931 690-5M-450SL 450 2.775
490-5M-450SL 450 1.971 695-5M-450SL 450 2.795
500-5M-450SL 450 2.011 700-5M-450SL 450 2.815
505-5M-450SL 450 2.031 710-5M-450SL 450 2.856
510-5M-450SL 450 2.051 720-5M-450SL 450 2.896
520-5M-450SL 450 2.091 725-5M-450SL 450 2.916
525-5M-450SL 450 2.112 740-5M-450SL 450 2.976
530-5M-450SL 450 2.132 750-5M-450SL 450 3.016
535-5M-450SL 450 2.152 755-5M-450SL 450 3.000
540-5M-450SL 450 2.172 770-5M-450SL 450 3.097
550-5M-450SL 450 2.212 775-5M-450SL 450 3.117
560-5M-450SL 450 2.252 780-5M-450SL 450 3.137
565-5M-200SL 200 1.010 790-5M-450SL 450 3.177
570-5M-450SL 450 2.293 800-5M-450SL 450 3.218
575-5M-450SL 450 2.313 825-5M-450SL 450 3.318
580-5M-450SL 450 2.333 835-5M-450SL 450 3.358
585-5M-450SL 450 2.353 850-5M-450SL 450 3.419
590-5M-450SL 450 2.373 860-5M-450SL 450 3.459
600-5M-450SL 450 2.413 870-5M-450SL 450 3.499
605-5M-450SL 450 2.433 890-5M-450SL 450 3.580
610-5M-450SL 450 2.453 900-5M-450SL 450 3.620
615-5M-450SL 450 2.474 920-5M-450SL 450 3.700
620-5M-450SL 450 2.494 925-5M-450SL 450 3.720

54 www.carlislebelts.com
 Synchro-Cog HT
®

Sleeves

Part Number Example: 1000-5M-450SL  = 1000 – 5M – 450 SL

| | | |
Pitch Length Tooth Pitch Width Sleeve
(millimeters) (HTD profile) (millimeters)

Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

Synchronous Belts
5M Pitch – High Torque Synchronous (HTS) Sprockets: 5M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD, Taper Bushed (5mm) MPB, QD, Taper Bushed (5mm)
935-5M-450SL 450 3.761 1690-5M-450SL 450 6.797
940-5M-450SL 450 3.781 1790-5M-450SL 450 7.199
950-5M-450SL 450 3.821 1800-5M-450SL 450 7.240
960-5M-450SL 450 3.861 1895-5M-440SL 440 7.452
965-5M-450SL 450 3.881 2000-5M-450SL 450 8.044
975-5M-450SL 450 3.921 2100-5M-450SL 450 8.446
980-5M-450SL 450 3.942 2350-5M-450SL 450 9.452
1000-5M-450SL 450 4.022 2525-5M-450SL 450 10.156
1025-5M-450SL 450 4.123 2635-5M-450SL 450 10.598
1050-5M-450SL 450 4.223 4260-5M-440SL 440 16.753
1100-5M-450SL 450 4.424 8M Pitch – High Torque Synchronous (HTS) Sprockets:
1115-5M-450SL 450 4.485 MPB, QD, Taper Bushed (8mm)

1125-5M-450SL 450 4.525 320-8M-450SL 450 1.739

1145-5M-450SL 450 4.605 368-8M-450SL 450 2.000
1175-5M-450SL 450 4.726 400-8M-450SL 450 2.174
1180-5M-450SL 450 4.746 408-8M-450SL 450 2.217
1195-5M-450SL 450 4.806 424-8M-450SL 450 2.304
1200-5M-450SL 450 4.826 440-8M-450SL 450 2.391
1210-5M-450SL 450 4.867 448-8M-450SL 450 2.435
1250-5M-450SL 450 5.027 480-8M-450SL 450 2.609
1270-5M-450SL 450 5.108 512-8M-450SL 450 2.783
1290-5M-450SL 450 5.188 520-8M-450SL 450 2.826
1295-5M-450SL 450 5.208 536-8M-450SL 450 2.913
1300-5M-450SL 450 5.229 544-8M-450SL 450 2.956
1340-5M-450SL 450 5.389 560-8M-450SL 450 3.043
1350-5M-450SL 450 5.430 568-8M-450SL 450 3.087
1375-5M-450SL 450 5.530 576-8M-450SL 450 3.130
1420-5M-450SL 450 5.711 584-8M-450SL 450 3.174
1450-5M-450SL 450 5.832 592-8M-450SL 450 3.217
1500-5M-450SL 450 6.033 600-8M-450SL 450 3.261
1595-5M-450SL 450 6.415 608-8M-450SL 450 3.304
1600-5M-450SL 450 6.435 624-8M-450SL 450 3.391
1685-5M-450SL 450 6.777 632-8M-450SL 450 3.435

www.carlislebelts.com 55
 Synchro-Cog HT
®

Sleeves

Synchro-Cog HT Sleeve ®

Part Numbers
Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

8M8M
Pitch – High
Pitch Torque
– High Synchronous
Torque (HTS)
Synchronous Sprockets:
Sprockets – MPB, 8M8M
Pitch – High
Pitch Torque
– High Synchronous
Torque (HTS)
Synchronous Sprockets:
Sprockets – MPB,
MPB,
QD, QD, Taper
Taper Bushed
Bushed (8mm)
(5mm, 8mm, 14mm, 20mm) MPB,
QD, QD, Taper
Taper Bushed
Bushed (8mm)
(5mm, 8mm, 14mm, 20mm)
640-8M-450SL 450 3.478 1024-8M-450SL 450 5.565
648-8M-450SL 450 3.522 1040-8M-450SL 450 5.652
656-8M-450SL 450 3.565 1056-8M-450SL 450 5.739
680-8M-450SL 450 3.696 1064-8M-450SL 450 5.782
688-8M-450SL 450 3.739 1080-8M-450SL 450 5.869
696-8M-450SL 450 3.782 1104-8M-450SL 450 6.000
712-8M-450SL 450 3.869 1120-8M-450SL 450 6.087
720-8M-450SL 450 3.913 1128-8M-450SL 450 6.130
760-8M-450SL 450 4.130 1136-8M-450SL 450 6.174
768-8M-450SL 450 4.174 1152-8M-450SL 450 6.261
776-8M-450SL 450 4.217 1160-8M-450SL 450 6.304
784-8M-450SL 450 4.261 1168-8M-450SL 450 6.348
792-8M-450SL 450 4.304 1184-8M-450SL 450 6.435
800-8M-450SL 450 4.348 1200-8M-450SL 450 6.521
816-8M-450SL 450 4.435 1208-8M-450SL 450 6.565
824-8M-450SL 450 4.478 1216-8M-450SL 450 6.608
840-8M-450SL 450 4.565 1224-8M-450SL 450 6.652
848-8M-450SL 450 4.609 1240-8M-450SL 450 6.739
856-8M-450SL 450 4.652 1248-8M-450SL 450 6.782
864-8M-450SL 450 4.695 1256-8M-450SL 450 6.826
880-8M-450SL 450 4.782 1264-8M-450SL 450 6.869
896-8M-450SL 450 4.869 1272-8M-450SL 450 6.913
912-8M-450SL 450 4.956 1280-8M-450SL 450 6.956
920-8M-450SL 450 5.000 1304-8M-450SL 450 7.087
928-8M-450SL 450 5.043 1312-8M-450SL 450 7.130
936-8M-450SL 450 5.087 1320-8M-450SL 450 7.174
944-8M-450SL 450 5.130 1328-8M-450SL 450 7.217
952-8M-450SL 450 5.174 1344-8M-450SL 450 7.304
960-8M-450SL 450 5.217 1352-8M-450SL 450 7.348
968-8M-450SL 450 5.261 1360-8M-450SL 450 7.391
976-8M-450SL 450 5.304 1376-8M-450SL 450 7.478
1000-8M-450SL 450 5.435 1392-8M-450SL 450 7.565
1016-8M-450SL 450 5.522 1400-8M-440SL 440 7.439

56 www.carlislebelts.com
 Synchro-Cog HT
®

Sleeves

Part Number Example: 1600-8M-440SL  = 1600 – 8M – 440 SL

| | | |
Pitch Length Tooth Pitch Width Sleeve
(millimeters) (HTD profile) (millimeters)

Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

Synchronous Belts
8M8M
Pitch – High
Pitch Torque
– High Synchronous
Torque (HTS)
Synchronous Sprockets:
Sprockets – MPB, 8M14M
Pitch – High
Pitch Torque
– High Synchronous
Torque (HTS)
Synchronous Sprockets:
Sprockets –
MPB,
QD, QD,
TaperTaper Bushed
Bushed (8mm)
(5mm, 8mm, 14mm, 20mm) MPB, QD,QD,
MPB, Taper Bushed
Taper (8mm)
Bushed (5mm, 8mm, 14mm, 20mm)
1424-8M-440SL 440 7.567 2056-8M-440SL 440 10.925
1440-8M-440SL 440 7.652 2080-8M-440SL 440 11.053
1456-8M-440SL 440 7.737 2104-8M-440SL 440 11.180
1464-8M-440SL 440 7.779 2136-8M-440SL 440 11.350
1480-8M-440SL 440 7.864 2160-8M-440SL 440 11.478
1512-8M-440SL 440 8.034 2208-8M-440SL 440 11.733
1520-8M-440SL 440 8.077 2240-8M-440SL 440 11.903
1552-8M-440SL 440 8.247 2272-8M-440SL 440 12.073
1560-8M-440SL 440 8.290 2304-8M-440SL 440 12.243
1576-8M-440SL 440 8.375 2328-8M-440SL 440 12.371
1584-8M-440SL 440 8.417 2392-8M-440SL 440 12.711
1600-8M-440SL 440 8.502 2400-8M-440SL 440 12.753
1640-8M-440SL 440 8.715 2504-8M-440SL 440 13.306
1648-8M-440SL 440 8.757 2584-8M-440SL 440 13.731
1680-8M-440SL 440 8.927 2600-8M-440SL 440 13.816
1696-8M-400SL 400 8.193 2656-8M-440SL 440 14.113
1728-8M-440SL 440 9.182 2736-8M-440SL 440 14.539
1744-8M-440SL 440 9.267 2800-8M-440SL 440 14.879
1752-8M-440SL 440 9.310 3048-8M-440SL 440 16.196
1760-8M-440SL 440 9.352 3120-8M-440SL 440 16.579
1784-8M-440SL 440 9.480 3168-8M-440SL 440 16.834
1792-8M-440SL 440 9.522 3200-8M-440SL 440 17.004
1800-8M-440SL 440 9.565 3280-8M-440SL 440 17.429
1840-8M-440SL 440 9.777 3400-8M-440SL 440 18.067
1856-8M-440SL 440 9.862 3600-8M-440SL 440 19.130
1896-8M-440SL 440 10.075 3824-8M-440SL 440 20.320
1904-8M-440SL 440 10.117 4000-8M-440SL 440 21.255
1920-8M-440SL 440 10.203 4400-8M-180SL 180 9.565
1928-8M-440SL 440 10.245 5120-8M-240SL 240 14.840
1936-8M-440SL 440 10.288 5576-8M-440SL 440 29.630
1952-8M-440SL 440 10.373 5600-8M-440SL 440 29.757
1992-8M-440SL 440 10.585 5960-8M-240SL 240 17.275
2000-8M-440SL 440 10.628 Continued on next page

www.carlislebelts.com 57
 Synchro-Cog HT
®

Sleeves

Synchro-Cog HT ® Part Number Example: 1400-14M-440SL = 1400

| | | |
Pitch Length Tooth Pitch Width Sleeve
– 14M – 440 SL

Sleeve Part Numbers

(millimeters) (HTD profile) (millimeters)

Part Sleeve Width Sleeve Weight Part Sleeve Width Sleeve Weight
Number (mm) (lbs) Number (mm) (lbs)

14M Pitch
14M – High
Pitch Torque
– High Synchronous
Torque (HTS)
Synchronous Sprockets:
Sprockets – 14M Pitch – High Torque Synchronous (HTS) Sprockets:
MPB, QD,
MPB, QD,Taper Bushed
Taper (14mm)
Bushed (5mm, 8mm, 14mm, 20mm) MPB, QD, Taper Bushed (14mm)

966-14M-440SL 440 8.323 2800-14M-440SL 440 24.126

1036-14M-440SL 440 8.927 3108-14M-430SL 430 26.171
1092-14M-440SL 440 9.409 3150-14M-430SL 430 26.525
1120-14M-440SL 440 9.650 3304-14M-430SL 430 27.821
1148-14M-440SL 440 9.892 3360-14M-430SL 430 28.293
1190-14M-440SL 440 10.253 3500-14M-430SL 430 29.472
1246-14M-440SL 440 10.736 3668-14M-430SL 430 30.886
1260-14M-440SL 440 10.857 3850-14M-430SL 430 32.419
1316-14M-440SL 440 11.339 4326-14M-350SL 350 29.650
1344-14M-440SL 440 11.580 4536-14M-430SL 430 38.195
1400-14M-440SL 440 12.063 4578-14M-230SL 230 20.619
1442-14M-440SL 440 12.425 4956-14M-430SL 430 41.732
1456-14M-440SL 440 12.545 5320-14M-430SL 430 44.797
1470-14M-440SL 440 12.666 5740-14M-430SL 430 48.334
1540-14M-440SL 440 13.269 6160-14M-430SL 430 51.870
1568-14M-440SL 440 13.510 6860-14M-430SL 430 57.765
1610-14M-440SL 440 13.872
1652-14M-440SL 440 14.234
1750-14M-440SL 440 15.079
1764-14M-440SL 440 15.199
1778-14M-440SL 440 15.320
1792-14M-440SL 440 15.440
1806-14M-440SL 440 15.561
1820-14M-440SL 440 15.682
1890-14M-440SL 440 16.285
1932-14M-440SL 440 16.647
1960-14M-440SL 440 16.888
2100-14M-440SL 440 18.094
2240-14M-440SL 440 19.301
2310-14M-440SL 440 19.904
2450-14M-440SL 440 21.110
2590-14M-440SL 440 22.316
2660-14M-440SL 440 22.919

58 www.carlislebelts.com