Validate Print Help Percentage BoQ

Tender Inviting Authority: Additional Chief Engineer,PHED,Jaipur Region I Jaipur

Name of Work: "Work of Construction & Commissioning of Tube Wells, Providing, laying, testing and commissioning of DI / HDPE pipe line, Providing and Installation of Pumping
Machinery, Construction of RCC OHSR and CWR, Construction of Pump house with allied civil works with Defect Liability of One year under Augmentation and Rehabilitation of UWSS
Sikar For Zone No 6,23A and 25 of Town Sikar, District Sikar on SPR basis."

Contract No: NIT No 85/2021-22

Bidder
Name :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender.
Bidders are allowed to enter the Bidder Name and Values only )

NUMBER # TEXT # NUMBER # TEXT # NUMBER NUMBER # TEXT #

Sl. Item Description Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate WithTaxes In Words

1 2 4 5 6 53 55
1 Construction of tube well from ground level & up to 100 mtr depth to
accommodate housing and assembly pipe of following sizes in all type of
alluvium strata unconsolidated formation such as pebbles, boulders etc. by
percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part
II: 1979 (both amended upto date) and technical specifications, with gravel as
per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as
amended up to date (the work includes the cost of gravel & it's primary packing
and packing during development, lowering of housing & strainer assembly
pipes with supply and wrapping of coir-rope, wherever necessary for arresting
fine sand particles and development work, but excluding the cost of housing
and strainer pipe assembly). The work would be completed after obtaining sand
free water.

1.1 Nominal bore 200 mm dia 1000.00 MTR 1355.00 #VALUE! #VALUE!

2 Add 15% extra on depth more than 100 mtr for drilling beyond 100 mtr 100.00 MTR 1558.00 #VALUE! #VALUE!
depth from ground level
3 Construction of tube well after completion of drilling by rotary
/percussion/odex method & upto 150 mtr. depth in all type of rocks by
DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
(both amended upto date) and technical specifications. The work shall
be deemed completed only after obtaining sand free water. The bore
well should have a throughout nominal size bore beyond casing pipe.

3.1 Nominal bore 200 mm dia 400.00 MTR 1121.00 #VALUE! #VALUE!

4 Labour charges for making slots on blank pipes made of ERW MS black
pipe ISI marked of following sizes, the slotting should be as per IS:8110-
1985.
5.1 200 mm dia nominal bore 180.00 MTR 273.00 #VALUE! #VALUE!

6 Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm
thick 100mm wide shroud around the edge so as to form a cap on the
top end of casing pipe with GI Nipple 45cm long & two GI flanges at both
ends in 80mm sizes passing through a hole in the centre of MS sheet. A
25 mm socket with end plug shall also be welded over top plate. A GI
nipple having outside thread of size 1/2" (for installation pressure gauge)
shall be provided & welded with 80mm GI nipple near top plate nipple
shall be provided with end plug.

6.1 200 mm dia

10.00 NOS 850.00 #VALUE! #VALUE!

7 Supply & Installation of 3 phase ISI marked submersible motor pump set
of five star rating by BEE and as per IS: 8034-2018 (pump) and IS 9283-
2013 (motor) or as amended up to date of approved make of following
duty condition with required accessories including making connection
suitable for tube well/DCB. The job includes lowering of motor pump,
installation of complete fitting & accessories, jointing of electrical cables
up to switch board, testing of submersible pump set and interconnection
up to water mains, complete in all respect.

7.1 7.5 KW (10 HP) & Head up to 120 mtr 75.00 KW 5900.00 #VALUE! #VALUE!

8 Supply & Fixing of ISI marked three core PVC flat submersible cable as
per IS 694:1990 or amended up to date and conductor as per class 5 of
IS 8130:1980 including making connection etc.
8.1 3 core 4.0 mm2 1700.00 MTR 163.00 #VALUE! #VALUE!

9 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade
with aluminium conductor Armoured of IS:7098-I/1554-1 approved make
in ground as per IS:1255 including excavation of 30cmx75cm size
trench, 25 cm thick under layer of sand, second Class bricks covering,
refilling earth, compaction of earth, making necessary connection, testing
etc. as required of size.
9.1 10.0 Sq.mm, 4 core
100.00 MTR 169.00 #VALUE! #VALUE!

10 Providing & Lowering in tube well ISI marked GI Pipe “B" class as per
IS:1239 or amended up to date threaded and double flanged (welded) on
both ends and two number 25x3mm MS flat welded on both ends
between pipe & flange, rubber washer & nut bolts etc. complete in all
respect.
10.1
800.00 MTR 597.00 #VALUE! #VALUE!
50 mm dia
11 Providing & laying ISI marked GI Pipe “A” class as per IS: 1239 for
casing pipe for submersible cable external work 40 mm dia complete in 20.00 MTR 327.00 #VALUE! #VALUE!
all respect.
12 Providing & Fixing of double flanged, CI body, ISI marked NRV of
approved make of following sizes
12.1 80 mm 10.00 NOS 2440.00 #VALUE! #VALUE!

13 Providing, lowering, aligning, fixing in position in pipe line, CI D/F

Sluice valves of approved make of following Pressure rating & dia
complete, confirming to IS:14846 (amended up to date) and of following
specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand
wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat
ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions
as per IS 14846/2000 (amended up to date), All exposed machined
ferrous surfaces shall be painted with one coat of aluminium red oxide
primer conforming to IS:5660 and two coats of black Japan paint
conforming toType B of IS 341or paint conforming to IS9862 or
IS2932( Non-Toxic- suitable for drinking water) applied inside and
outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363
and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm
thick . Suitable support structure as per directions of EIC. Sluice valves
including all jointing & jointing material, labour, testing and
commissioning along with pipe line as per Technical Specifications and
as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

13.1 80 mm dia HW 10.00 NOS 5432.00 #VALUE! #VALUE!

14 Supplying & Installing 100 mm diameter sealed diaphragm bourdon type

pressure gauge of range 0 to 10 kg. including all jointing material as per 10.00 NOS 1100.00 #VALUE! #VALUE!
specification with safety cover.
15 Providing, installing, testing and commissioning of double flanged bulk
flow meter with removable mechanism, of class B conforming to ISO
4064/1 or amended upto date of approved make including cost of all
material and labour as per specifications with GI Box (sheet 16 SWG)
suitable with locking arrangement of following dia.
15.1 50 mm dia
10.00 NOS 11201.00 #VALUE! #VALUE!

16 Supply and Fixing of electric control feeder panel comprising of suitable

rating MCCB , fully automatic star-delta starter, over load relay, ampere
meter with CTs, volt meter, phase preventer, suitable starting capacitors,
phase indicators, lighting arrangement etc. complete suitable for three
phase pump set. The panel should have space for energy meter
( supplied by DISCOM). All these equipments shall be housed by panel
box made out from 18 gauge M.S. Sheet with powder coating. Panel
should be of minimum size 900 x 600 x 450 mm with Stand ( made of
angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box
having 4 legs, each leg’s length 18" and double door including in built
locking system. The legs should be embedded in M-15 cement concrete
plat form. The size of CC platform should be equal or bigger than the
base size of panel having height of at least 200 mm from ground level.
The panel should have opening of suitable size in front of space for
energy meter with glass for meter reading. The operation of panel should
be suitable for on 440 Volt AC Supply.

16.1 Above 5 HP and up to 10 HP 10.00 NOS 20924.90 #VALUE! #VALUE!

17 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x
600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with
20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut,
bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber
covered with hinged type with locking arrangement C.I. Cover, C.I. 10.00 NOS 3150.00 #VALUE! #VALUE!
Frame of size 300mm x 300mm complete with alternate layers of salt
and coke/charcoal, testing of earth resistance as required.

18 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and
bolts etc for holding the riser pipe assembly of submersible pump set. 10.00 EACH 600.00 #VALUE! #VALUE!

19 Providing & Fixing pump safety cage as per specifications or as directed 10.00 NOS 960.00 #VALUE! #VALUE!
by Engineer in charge.
20 Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or
amended up to date of following sizes
20.1 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) 1100.00 MTR 2630.00 #VALUE! #VALUE!

21 RISING MAIN PIPE LINE Earth work in excavation by mechanical means

(Hydraulic Excavator )/ manual means in trenches for water supply pipe lines,
shoring and strutting if required as per required gradient and line including
safety provisions using site rails and stacking excavated stuff including up to all
required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata
as specified. The work also includes depositing and refilling of trench with 4940.56 CUM 172.00 #VALUE! #VALUE!
watering & ramming /compacting in layers and disposal of surplus excavated
soil as directed for lead up to 50 mtr In All types of soils

22 Dismantling of cement concrete pavement for pipe line and chambers by

mechanical means using pneumatic tools, cutting the peripheral edge by CC
cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at
designated locations and disposal of dismantled materials up to a lead of 1000
meters. Measurement for dismantled trench to be made as per standard trench
110.00 CUM 653.00 #VALUE! #VALUE!
width specified in tender document and no extra payment shall be made for
trench width more than specified, re-handling of material/earth to complete the
tasks as per technical specification and scope of work.200MM DIA
23 Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI
marked Pipes as per IS-4984: 1995 (amended upto date) with necessary
jointing material like mechanical connectors, i.e. thread/ insert joint/ quick
release coupler joint/ compression fitting joint or flanged joint and specials
jointing pipe by electro fusion welding method, including all taxes ,
transportation and freight charges, inspection charges, loading/ unloading
charges, stacking of pipes, including cost of labour and material, specials (Tee,
bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per
technical specifications and direction of Engineer-in-charge of following class
and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and
layout are inclusive in RM measurement of the item and shall not be paid
separately.
Supply may be in coil or straight length in 6 M/12 M. HDPE PE-80 PN-10

23.1 90 mm dia
1827.00 Mt 387.00 #VALUE! #VALUE!

23.2 110mm dia

2755.00 Mt 582.00 #VALUE! #VALUE!

24 Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI

marked Pipes as per IS-4984: 1995 (amended upto date) with necessary
jointing material like mechanical connectors, i.e. thread/ insert joint/ quick
release coupler joint/ compression fitting joint or flanged joint and specials
jointing pipe by butt fusion /electro fusion welding method, including all
taxes , transportation and freight charges, inspection charges, loading/
unloading charges, stacking of pipes, including cost of labour and material,
specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc.
complete as per technical specifications and direction of Engineer-in-charge of
following class and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and
layout are inclusive in RM measurement of the item and shall not be paid
separately HDPE PE-80 PN-10

24.1 140 mm dia

314.00 Mt 1010.00 #VALUE! #VALUE!

25 Providing, lowering, laying in trenches, aligning, fixing in position and jointing

Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000
(amended upto date), with internal cement mortar lining suitable for potable
water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes
(Central and local), transportation and freight charges, inspection charges,
loading/ unloading charges, including cost of labour and material, specials
(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per
technical specifications and direction of Engineer-in-charge. (excluding earth
work)
Note : Providing and fixing of all requisite specials as per drawing, design and
layout are inclusive in RM measurement of the item and shall not be paid
separately.

25.1 200 mm dia

3302.00 Mt 2202.00 #VALUE! #VALUE!

25.2 300 mm dia

1130.00 Mt 3639.00 #VALUE! #VALUE!

26 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI

Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes
for following pressure rating & dia complete, confirming to IS: 14845-2000
(amended upto date) and of following specifications: Body , Cover and Cowl -
Grey Cast Iron as per IS:210- FG 200, float - Stainless Steel AISI 304 / IS:
3444 , Float Guide- HBT1.HP Orifice- HTB2/ SS, Body seat ring - Leaded tin
bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS:
6418, Fastners - CS, Epoxy paint inside outside of food grade safe for drinking
water, valves including all material,labour,testing and commissioning as per
Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work. Class
PN 1.0

26.1 50mm dia

4.00 EACH 11409.00 #VALUE! #VALUE!

26.2 80mm dia

1.00 EACH 14752.00 #VALUE! #VALUE!

27 Providing, lowering, laying, aligning, fixing in position and jointing at all level/
depths DI standard specials with rubber ring (EPDM)/ nut bolt and
insertion sheet and jointing as per IS: 9523-2000 or as amended up to date,
such as tees, bends, tapers, caps etc. within trenches in DI pipe line
complete including all material, labour, taxes, testing and commissioning
along with pipe line as per technical specifications and direction of Engineer-in-
charge (excluding earth work). A/S Tee , Bend, Reducer (All End Socketed)

27.1
Upto 300 mm Diameter 2000.00 kg 139.00 #VALUE! #VALUE!

27.2
Above 300mm and up to 600 mm diameter 500.00 kg 155.00 #VALUE! #VALUE!

28 DISTRIBUTION MAIN PIPE LINE Earth work in excavation by

mechanical means (Hydraulic Excavator )/ manual means in trenches of
required width and gradient for laying and jointing of pipe line including
excavation for sockets and dressing of sides,ramming of bottom,depth
upto 1.5 mts. including taking out excavated soil and then returning the
soil as required in layers not exceeding 20 cm in depth including 17427.72 cum 172.00 #VALUE! #VALUE!
conslidating each deposited layer by ramming,watering etc. and disposal
of surplus excavated soil as directed within a lead of 50 Mtr. including
required all safety provisions etc. All kind of soil.
29 Dismantling of cement concrete pavement for pipe line and chambers
by mechanical means using pneumatic tools, cutting the peripheral edge
by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and
stock piling at designated locations and disposal of dismantled materials
up to a lead of 1000 meters. Measurement for dismantled trench to be
made as per standard trench width specified in tender document and no 517.25 cum 653.00 #VALUE! #VALUE!
extra payment shall be made for trench width more than specified, re-
handling of material/earth to complete the tasks as per technical
specification and scope of work.

30 Dismantling of flexible pavement for pipe line and chambers by mechanical

means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in
volume and stock piling at designated locations and disposal of dismantled
materials up to a lead of 1000 meters. Measurement for dismantled trench to be
made as per standard trench width specified in tender document and no extra
payment shall be made for trench width more than specified, re-handling of
material/earth to complete the tasks per technical specification and scope of
work.

30.1 Bituminous courses 173.60 cum 362.00 #VALUE! #VALUE!

30.2 Granular Course
870.64 cum 259.00 #VALUE! #VALUE!

31 Providing, lowering, laying in trenches, aligning, fixing in position and jointing

Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000
(amended upto date), with internal cement mortar lining suitable for potable
water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes
(Central and local), transportation and freight charges, inspection charges,
loading/ unloading charges, including cost of labour and material, specials (Tee,
bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per
technical specifications and direction of Engineer-in-charge. (excluding earth
work)
Note : Providing and fixing of all requisite specials as per drawing, design and
layout are inclusive in RM measurement of the item and shall not be paid
separately.

31.1 250mm
256.00 RMT 2851.00 #VALUE! #VALUE!

31.2 300mm
203.00 RMT 3639.00 #VALUE! #VALUE!

31.3 350mm 32.00 RMT 4431.00 #VALUE! #VALUE!

32 Providing, lowering, laying and jointing in trenches,  standard lengths HDPE ISI

marked Pipes as per IS-4984: 1995 (amended upto date) with necessary
jointing material like mechanical connectors, i.e. thread/ insert joint/ quick
release coupler joint/ compression fitting joint or flanged joint and specials
jointing pipe by electro fusion welding method, including all taxes ,
transportation and freight charges, inspection charges, loading/ unloading
charges, stacking of pipes, including cost of labour and material, specials (Tee,
bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per
technical specifications and direction of Engineer-in-charge of following class
and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and
layout are inclusive in RM measurement of the item and shall not be paid
separately. Supply may be in coil or straight length in 6 M/12 M HDPE PE-80
PN-6

32.1 90mm
29761.00 Mt 264.00 #VALUE! #VALUE!

32.2 110mm dia

3936.00 Mt 399.00 #VALUE! #VALUE!

33 Providing, lowering, laying and jointing in trenches,  standard

lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto
date) with necessary jointing material like mechanical connectors, i.e.
thread/ insert joint/ quick release coupler joint/ compression fitting joint or
flanged joint and specials jointing pipe by butt fusion /electro fusion
welding method, including all taxes , transportation and freight charges,
inspection charges, loading/ unloading charges, stacking of pipes,
including cost of labour and material, specials (Tee, bend etc.),
satisfactory hydraulic testing, disinfection etc. complete as per technical
specifications and direction of Engineer-in-charge of following class and
diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing,
design and layout are inclusive in RM measurement of the item and shall
not be paid separately.
Supply may be in straight length in 6 M/12 M.

33.1
125MM 2188.00 Mt 572.00 #VALUE! #VALUE!

33.2
140 mm dia 1883.00 Mt 713.00 #VALUE! #VALUE!

33.3
160 mm dia 1835.00 Mt 897.00 #VALUE! #VALUE!

33.4
180 mm dia 1199.00 Mt 1128.00 #VALUE! #VALUE!
33.5
200 mm dia 892.00 Mt 1351.00 #VALUE! #VALUE!

34 Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice

valves of approved make of following Pressure rating & dia complete,
confirming to IS:14846 (amended up to date) and of following specifications:
Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast
iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring &
Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended
up to date), All exposed machined ferrous surfaces shall be painted with one
coat of aluminium red oxide primer conforming to IS:5660 and two coats of
black Japan paint conforming toType B of IS 341or paint conforming to IS9862
or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside,
Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/
galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support
structure as per directions of EIC. Sluice valves including all jointing & jointing
material, labour, testing and commissioning along with pipe line as per
Technical Specifications and as per direction of Engineer-in-charge. Note:
Rates are exclusive of tail piece/ dismantling joints and earth work. Manually
Operated CI Sluice valve of Class PN-1.0

34.1 80 mm HW
10.00 EACH 5432.00 #VALUE! #VALUE!

34.2 100mm HW
7.00 EACH 7456.00 #VALUE! #VALUE!

35 Providing service connection as per technical specification and

approved drawing as per relevant IS code (amended up to
date) from HDPE pipe line up to consumer meter/premisesby
using electro fusion saddle piece (Complete job).This job
includes digging out suitable size of pits and trench for laying
service line in all kinds of soil, depositing and refilling of pit &
jhiri with watering & ramming /compacting in layers and
disposal of surplus excavated soil as directed with in a lead of
100 meter , providing & fixing of all fitting duly approved in
accordance with specification for potable water including
electro fusion saddle piece, gunmetal ferrule 4.0 mm, GW Full
way valve (IS: 778 Mark ) or wheel vave and specials, below
ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per
ISO 442/20 mm nominal dia PPR-C (Three Layered) pipe PN 16
SDR 7.4 (IS 15801 : 2008) (ISI mark) for and above ground
level using 20 mm dia PPR-C pipe with standard PPR fitting/15
mm dia GI pipe with fitting in the premises for fixing a
tap/meter box (excluding),including accessories wih
flusing,cleaning,disinfecting and testing of pipe line complete
required for making of service connection complete in all
respect including labour charge. The service line should be laid
35.1 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 Meter 2400.00 EACH 1786.00 #VALUE! #VALUE!

36 Road cutting for house hold service connection in minimum trench width where
ever road crossing is required. Road cutting of cement concrete, WBM, Black
Top etc. of all thickness shall be done by using a concrete cutter machine
keeping minimum trench width and restoration of the road with cement concrete 12000.00 MTR 172.00 #VALUE! #VALUE!
with PPC M-10 and CC M-30 grade as per specification and direction of
Engineer in Charge.

37 SITC of Bulk Flow Meter with removable mechanism class "B"

confirming to ISO:4064:2005/ IS: 2373 of approved make of
following dia sized pipelines and specifications complete: Media :
Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP-
68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B
(±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy
powder coated, Pulse out put option, Anti-magnetic protection
including all materials and making connection with existing pipeline
required for Bulk Flow Meter including cutting the existing pipeline
etc. complete in all respect as per technical specification and as per
direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth
work.

37.1
BFM 250 mm 2.00 EACH 60321.00 #VALUE! #VALUE!

37.2
BFM 300 mm 1.00 EACH 80704.00 #VALUE! #VALUE!
38 STORAGE Construction and commissioning of RCC INTZE type Over
Head Service Reservoir of following Capacity and Staging as per the scope
of work and Technical Specification, consisting of following main
activities:-
(a) Topographic survey ,preparation of site contour plan,conducting SBC test and its
approval from department before construction.Submission and approval of concrete
mix design and water quality test report from water to be used in construction.
(b) Excavation in all types of soil,PCC below foundation ,all RCC work,Plinth
protection all around the structure including all material,labour,shuttering,scaffolding
etc.
(c) OHSR shall be provided with adequate plinth protection all around the structure in
awidth starting from edge of structure at GL and extending at least up to 1.0 m betond
the edge of outer most protection of OHSR.The plinth protection shall consist of 150
mm thick PCC in M -15 grade concrete laid over 150 mm thick layer of completed soil.

(d) Providing and applying two coats of food grade epoxy paint on the inside surface
on the top dome,edge beam and 600 mm height of the vertical wall.
(e) Conducting sucessfully hydro test and water tightness test as per IS code
(f) Providing and applying three coats of anti carbonation paint on the top surface of
the Top Dome.
(g) Providing and applying three coats of cement-based paint on the external surface of
the container,balcony,cone wall,columns and beams etc . (h) Providing
and fixing SS-304 ventilator,SS304 man hole frame and cover and SS 304 ladder from
top dome/slab to bottom dome /slab inside container,
(i) Providing and fixing of MS section ladder from the last landing to balcony having
railing all around it and MS ladder with safety cage from balcony to top domee /slab.
(j) Providing and fixing water level indicator(Float type) .
(k) Providing anf fixing of hand railing all around the balcony,top dome and staircase
consisting of 25 mm diameter Class B GI pipe in two rows and 1000 mm high,
50X550X6 mm angle iron vertical post at a maximum spacing of 1500 mm centres.
(l) All MS parts to be painted with two coats of the enamel paint over the prier coat of
red oxide.

39 (l) All MS parts to be painted with two coats of the enamel paint over the prier coat of
red oxide.
(m) Providing and fixing of 150 mm wide PVC water bar for the construction joints in
the container (Vertical wall &cone Wall)
(n) Providing one Aluminium portable ladder of appropraite length to access first
landing (3.5 to 4.5 m above GL) from groung.

40 (o) Lighting arrester consisting of providing and fixing of 02 nos of chemical earthing
and connecting it to the conical cover of SS ventilator with two seprate GI strips of
50mmX3mm.
41 (p) CI/DI puddle collar shall be fixed in the bottom dome / slab for connecting
inlet,outlet,overflow and washout pipe of the reservior.
42 (q) Painting the name of the scheme and other details on the reservoir , and any other
work related to structure as per the directions of Engineer in Charge, Technical
Specification and scope of work.
43 ® Inlet,outlet,overflow,washout pipes and valves are not included in this
work,provision for the same shall be taken seprately.
44 Rates for RCC OHSR, SBC 10T/sqm, seismic zone II and Staging 18 Meter.
45 500 KL capacity (Homiophetic Hospita) Zone No 23A)
500000.00 LIT 12.94 #VALUE! #VALUE!

46 Rates for RCC OHSR, SBC 10T/sqm, seismic zone II and Staging 20 Meter.

47 500 KL capacity (Zone No 25)

500000.00 LIT 13.47 #VALUE! #VALUE!

48 500 KL capacity (Zone No 6)

500000.00 LIT 13.47 #VALUE! #VALUE!

49 Construction of RCC (Dome type) Clear Water Reservoir of following capacity as

per Scope of work
50 (a) Topographic survey ,preparation of site contour plan,conducting SBC test and its
approval from department before construction.Submission and approval of concrete
mix design and water quality test report from water to be used in construction.

51 (b) Excavation in all types of soil,PCC below foundation ,all RCC work including all labour and
material charges including providing and fixing of accessories such as SS ladder,SS manhole
frame and cover,water level indicator(Float type) SS Ventilator with SS screen,float
valve,puddle collar,GI pipe railling around walk way, top doe/slab staircase.,
52 © CWR shall be provided with adequate plinth protection all around the structure in a width
starting from edge of structure at GL and extending at least up to 1.0 m beyond the vertical wall
of CWR.The plinth protection shall consist o 150 mm thick PCC in M-15 concrete over 150
mm thick compacted soil fill.
53 (d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof
slab and 600 mm height of the vertical wall.
54 (e) Successful hydro test and water tightness test as IS code.
55 (f) Providing and applying three coat of anti carbonation paint on the roof slab.
56 (g) Providing and applying three coats of cement-based paint on the remaining external surface
area of the structure.
57 (h) Providing and fixing SS 304 manhole frame and cover and SS 304 ladder from roof slab to
bottom slab,inside container. Providing and fixing water level indicator (Float Type)
58 (i) Providing and fixing MS ladder from ground to top slab.
(k) Providing anf fixing of 150 mm wide water bar for the construction joints in the container.

59 (L) Providing and fixing CI/DI puddle collars the vertical wall for connecting
inlet,outlet,overflow and washout pipes of the reservoir.
60 (m) Inlet,outlet,overflow,washout pipes and valves are not included in this wirk,provisio for the
same shall be taken separately.

61 Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm SEISMIC ZONE
2,3&4
62 200 KL capacity
200000.00 LIT 5.74 #VALUE! #VALUE!

63 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000
(amended up to date), as vertical pipes for RCC Reservoirs including specials required such as
duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts,
bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber
as per direction of EIC, Technical Specification and Scope of work.

64 100 mm
73.00 MTR 1947.00 #VALUE! #VALUE!
65 200 mm
164.00 MTR 3664.00 #VALUE! #VALUE!

66 300 mm
48.00 MTR 6305.00 #VALUE! #VALUE!

67 350 mm
25.00 MTR 7609.00 #VALUE! #VALUE!

68 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient
seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and
pocket less body passage of approved make of following class & dia complete confirming to BS-
EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of
grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as
per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall
vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face
dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/
spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy
( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside
and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised
steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions
of EIC, Sluice valves including all jointing & jointing material, labour, testing and
commissioning along with pipe line as per Technical Specifications and as per direction of
Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.

69
Manually Operated Resilient Seated Sluice Valves of Class PN 1.0/1.6

69.1
100 mm dia 3.00 EACH 9960.00 #VALUE! #VALUE!

69.2
200 mm dia 3.00 EACH 25341.00 #VALUE! #VALUE!

69.3
300 mm dia 4.00 EACH 53559.00 #VALUE! #VALUE!

69.4
350 mm dia 2.00 EACH 100494.00 #VALUE! #VALUE!

70 PUMPING MACHINARY Providing and fixing at site with

necessary packing Horizontal Centifugal Split Casting pumps with 4
pole induction motor operating at syncronised speed of 1500 RPM as
per IS 12615 or amended up to date,CI casing and casing ring ,SS
316 impeller,SS 410 shaft and shaft sleeve,coupling guard,common
base plate,foundation bolts,Cement concrete foundation etc.complete
with all respect as per the specification and scope of work and
direction of Engineer in charge of following range of duty condition.
Not: Duty condition of required pump shall also be mentioned in
BOQ.

70.1 Dischage 20 to 30 LPS and head 31 to 40 M (Zone no 6) 2.00 EACH 143411.00 #VALUE! #VALUE!

70.2 Dischage 20 to 30 LPS and head 20 to 30 M (Zone no 25) 2.00 EACH 208816.00 #VALUE! #VALUE!

70.3 Dischage 41 to 50 LPS and head 41 to 50 M (Zone no 23A) 2.00 EACH 360058.00 #VALUE! #VALUE!

71 SITC STAR DELTA Starter type LT Panel of following rating: all

switchgears are of PHED approved makes, CRCA sheet of Panel
enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic
Powder Coated with angle frame including other ancillaries
( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name
Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding ,
Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc.
and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat
shrinkage sleeves complete as per Technical Specifications and as
per direction of Engineer-In-Charge.

71.1 STAR DELTA STARTER 15.0 KW (20.0 HP ) For 2 motors (1W+ 1S):
I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit
Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter
96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm
( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating
Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB
6A SP 10 KA C Curve (3) and

O/G- MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit 1.00 EACH 91403.00 #VALUE! #VALUE!
Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2),
Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2),
Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6),
Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2),
Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
71.2 STAR DELTA STARTER 25.0 HP - (1W+ 1S): I/C- MCCB 125A TPN 25
KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders
(2),Extended Rotary Handle (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1),
Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp.
Selector Switch (1), C. T. 125/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1,
Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C
Curve (3) and

O/G- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit 1.00 EACH 99109.00 #VALUE! #VALUE!
Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2),
Thermal Overload Relay (16-24A )(2), Control MCB 6A SP 10 KA C Curve (2),
Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6),
Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2),
Capacitor 440VAC Heavy Duty MPP Type 10 Kvar (2), S/D Timer(2)

72 SITC of Soft Starters with panel supplied by manufacturer

conforming to applicable standards with logic inputs & outputs,
relay outputs and analogue outputs, plug in I/O connections, display
of electrical parameters, state of load & operating time, RS 485
serial link for connections to Modbus.

72.1 45KW 2.00 EACH 112221.00 #VALUE! #VALUE!

73 P&F bus bar chamber made out of aluminium or wrought aluminium

alloy suitable for 100 amp. Capacity housed in sheet metal box
made out from 1.6 mm MS sheet front penable , bus bar fixed on
epoxy insulators.
73.1 600 mm long , 4 strip 3.00 EACH 2021.00 #VALUE! #VALUE!

74 Supplying and fixing of Aluminium / Copper bus bar by means of

SMC / DMC type insulator, high tensile nuts and bolts spring
washers in existing panel including bending , cutting in required
shape and size and colour coding with heat shrinkable PVC sleeves.

74.1 Electrolytic grade copper bus bar 6.00 KG 754.00 #VALUE! #VALUE!

75 SITC of microprocessor based intelligent power factor correction

relay having sensitivity up to 50 milli Amp secondary current and
following way, self analysing auto c/k setting according to targeted
power factor setting, the relay shall have minimum three digit
display unit for display of real power factor, targeted power factor,
lag/lead capacitor switching status, alarm output for under current,
over current, insufficient compensation, indication of switching on
units, auto/manual status, and shall have over load protection, no volt
release etc. as required.

75.1 6 to 14 stage - sensitivity upto 50 milli Amp. 1.00 EACH 18220.00 #VALUE! #VALUE!

76 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet
strips of relevant IS specification of approved thickness by welding, lowering,
laying, aligning, fixing in position at all level/ depths in trenches complete
including all taxes, material, labour, inside lining, outside coating, testing and
commissioning along with pipe line as per technical specifications and
direction of Engineer-in-charge.

76.1
MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 3000.00 KG 122.00 #VALUE! #VALUE!

77 Providing, lowering, aligning, fixing in position in pipe line at work

site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate
Valves) , Vacuum tight(bubble tight), straight and pocket less body
passage of approved make of following class & dia complete
confirming to BS-EN-1171/ AWWA C-509 and of following
specifications: Body & bonnet of Ductile cast iron of grade
GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865
or equivalent grade as per IS :3896-part2-1985 and subsequent
revisions, Wedge of same material as body & shall vulcanised
rubber lined with EPDM (food grade quality) and seals of NBR Face
to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up
to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent)
Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic-
suitable for drinking water) coated with minimum thickness of 250
microns inside and outside, Drilled as per IS 1538. Nut-Bolt
confirming to IS:1363 and IS: 1367 (Galvanised steel) Insersion
rubber of black EPDM 6mm thick. Suitable support structure as per
directions of EIC, Sluice valves including all jointing & jointing
material, labour, testing and commissioning along with pipe line as
per Technical Specifications and as per direction of Engineer-in-
charge. Note: Rates are exclusive of tail piece/ dismantling joints and
earth work.
77.1 Manually Operated Resilient Seated Sluice Valves of Class PN
1.0/1.6
77.2
150 mm dia 4.00 EACH 16473.00 #VALUE! #VALUE!

77.3
200 mm dia 6.00 EACH 25341.00 #VALUE! #VALUE!

77.4
250 mm dia 2.00 EACH 42053.00 #VALUE! #VALUE!
78 Providing, lowering, aligning, fixing in position in pipe line, DI D/F
resilient seated (soft seated) Swing type Non Return Valve of
approved make of following Pressure rating & dia complete,
generally confirming to IS: 5312 (part -1)/ 2004 (amended up to
date) and of following specifications: Body, Bonnet & disc of
Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR
SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-
1985 and subsequent revisions, Face to face dimensions as per IS
5312 (part -1):2004 Drilled as per IS:1538. Electrostatic Epoxy
Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for
drinking water) coated with minimum thickness of 250 micron
applied on body, cover and disc inside and outside . Disc seal ring of
EPDM/ Neoprene (food grade quality) and disc seal retaining ring of
SS/CS.Shaft of SS- AISI- 410, Hinge SS AISI 316/410 ,Bonnet
Gasket EPDM ,Bush- Brass with EPDM/NBR "O" ring seal Nut-
Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) Insersion
rubber of black EPDM 6mm thick. Suitable support structure as per
directions of EIC including jointing & jointing material, labour,
testing and commissioning along with pipeline as per Technical
Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece dismantling joints and earth
work.

78.1 Class PN 1.0/1.6

78.2
150 mm dia 4.00 EACH 18811.00 #VALUE! #VALUE!

78.3
200 mm dia 2.00 EACH 31906.00 #VALUE! #VALUE!

79 SITC of D/F Full bore type Electromagnetic Flow Meter of approved

make of following dia and specifications complete: Media : Water
(Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50
deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L /
Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/
Neoprene / Poly-urethane (PU) , Flange : SS / CS, Flange Standard
& Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die
Cast Aluminium, with anticorrosive paint & provide completely
sealed (leak proof) construction as per requirement of IEC 60529,
Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal
convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240
V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication
Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable
Entry : M20 X 1.5, Provision of RAM/PROM to store calibration
and configuration parameters and totalizer value during power
failure, Protection category- IP 68 for sensor (flow tube) and IP 67
for transmitter/ convertor, including Surge Arrester, if required, and
all materials required for making connection with existing pipeline
including cutting the existing pipeline etc. complete in all respect as
per technical specification and as per direction of Engineer In-
Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth
work.

79.1
EFM 150 mm 2.00 EACH 125776.00 #VALUE! #VALUE!

79.2
EFM 250 mm 1.00 EACH 155982.00 #VALUE! #VALUE!

80
Providing, lowering, aligning, fixing in position and jointing CI
dismantling joint (Suitable for Sluice valves etc.) as per IS
specifications complete of the following sizes including all
jointing material, cost of all labour, testing and commissioning
and as per technical specifications and direction of Engineer In-
Charge. Class PN 1.0/1.6

80.1
150 mm dia. 6.00 EACH 4964.00 #VALUE! #VALUE!

80.2
200 mm dia. 8.00 EACH 7383.00 #VALUE! #VALUE!

80.3
250 mm dia. 4.00 EACH 10111.00 #VALUE! #VALUE!
81 Providing,installation, testing and commisioning of vacuum Feed
Gas Chlorinator with all assessories and making connection with
existing pipeline required including supply & instalation of trunnion
roller support, auxillary container valve, fluxible copper connector,
manifold valve, tonner manifold pipes, chlorine Pressure gauge,
Isolation valve, gas filter, pressure reducing valve, chlorine gas pipe
with fittings, diffuser, lifting beam, load indicator, 25 NB PP
diaphragm Valve on injector inlet & outlet, 32 OD uPVC pipe for
chlorine solution, 25 NB GI pipe for pump suction & delivery, 25
NB GM gate valve on pump suction & delivery, 25 NB GM 'Y' type
stainer on pump suction, 25 NB GM Check valve on pump delivery,
pressure gauge with Isolated valve on pump delivery and chlorine
booster pump with motor of required capacity complete in all respect
as per specification and the direction of the Engineer.

81.1 1 kg/hr capacity 2.00 EACH 481400.00 #VALUE! #VALUE!

82 Supplying, erecting, testing & commissioning of Electrically

Operated Travelling Crane (EOT) .Main girder & End Carriage
fabricated from Rollled Steel Section, Gear Box for all motion,
Electro Magnetic Friction Disc Type Brakes, all safety limit
switches, LT wheels EN 9, Double Flanged 4No, with Sq. Cage
motor of adequate rating (KW), duly painted mechanical cleaning
and one coat of primer and two coat of synthetic paint and as per the
direction of the Engineer. 2 MT CAPACITY

82.1 Span 7 M and Lift 6 M 1.00 SET 373700.00 #VALUE! #VALUE!

83 Providing&LayingP.V.C./XLPE insulated & P.V.C.sheathed Un-

armoured/Armoured aluminium cable of 1.1KV grade as per PWD
specification for electrical Works in existing RCC /Hume /
Stoneware /PV Cpipe/ open duct/ cable trench with filling of
excavated earth in trench,on existing cable trays or surface
etc .including making necessary connection ,testing etc.as required
of size

83.1 4 core 16 Sqmm 60.00 MTR 103.00 #VALUE! #VALUE!

83.2 3.5core 25 Sqmm 30.00 MTR 143.00 #VALUE! #VALUE!

84 Providing, installation, testing and commissioning of submersible

dewatering pump set conforming to relevant IS codes and as per
scope of work and Technical Specifications, with water proof
winding. Pump shall be suitable for various delivery head and
discharge with stainless steel shaft, impeller, pump and motor body.
Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C.
Supply, with cable guard.The pump set shall be suitable for direct
coupling, with suitable suction strainer etc. complete in all respect
as per specification, scope of work and direction of Engineer in
Charge of following power rating, suitable for prescribed duty
conditions of one of the makes approved by Technical Committee.
84.1
1.0 HP 2.00 EACH 34961.00 #VALUE! #VALUE!

85 Supplying & Installing 100 mm diameter sealed diaphragm

bourdon type pressure gauge of range 0 to 10 kg. including all 3.00 EACH 1100.00 #VALUE! #VALUE!
jointing material as per specification with safety cover.
86 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x
600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with
20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut,
bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber
covered with hinged type with locking arrangement C.I. Cover, C.I. 3.00 NOS 3150.00 #VALUE! #VALUE!
Frame of size 300mm x 300mm complete with alternate layers of salt
and coke/charcoal, testing of earth resistance as required.

87 CIVIL WORK Earth work in excavation in foundation trenches or drains including

dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the
excavated soil and depositing and refilling of jhiri with watering & ramming and 378.80 CUM 226.00 #VALUE! #VALUE!
disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of
soil.
88
Providing and laying in position cement concrete including curing compaction etc. of
specified grade excluding the cost of centering and shuttering =All up to plinth level

89
1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size 28.65 CUM 3731.00 #VALUE! #VALUE!

90 1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 40

mm nominal size 10.30 CUM 3173.00 #VALUE! #VALUE!
91 Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar
above 30 Cm. thick wall in :
92
Cement Mortar 1:5 (1-Cement:5-Sand). 423.16 CUM 3066.00 #VALUE! #VALUE!

93 Providing and laying damp-proof course with cement concrete grade M-150 (1:2:4)
mortar prepared with 1 % solution of water-proof compound) including two coats of
hot blown bitumen (2 Kg. P.Sqm.) complete as per specification with glass strip 3 mm
thick at a distance of 1 Meter interval

94
75 mm thick 190.60 SQM 373.00 #VALUE! #VALUE!

95 Brick work in superstructure up to third storey with selected bricks of class designation
75 in exposed brick work including making horizontal and vertical grooves 10 mm. 333.21 CUM 3106.00 #VALUE! #VALUE!
Wide 12 mm deep complete in cement mortar 1:6
96
Reinforced cement concrete work in beams, suspended floors, roofs, girders having
slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows
sills, staircases and spiral staircases, up to floor three level including curing,
compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse
sand) and making good and joints excluding the cost of centering, shuttering and
reinforcement

97
1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) 77.19 CUM 4839.00 #VALUE! #VALUE!

98
Reinforced cement concrete work in walls (any thickness)
including attached pilasters, buttresses, plinth and string
courses, fillets, columns, pillars, piers, abutments, posts and
struts etc. up to floor three level including curing, compaction, finishing with rendering
in cement sand mortar 1:3 (1- Cement:3-coarse sand) and making good the joints
excluding cost of centering shuttering and reinforcement

99
1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate
33.17 CUM 4641.00 #VALUE! #VALUE!
20 mm nominal size).

100 Centering and shuttering with plywood or steel sheets

including strutting, propping, bracing both ways with wooden members and removal of
formwork for superstructure up to 4.5 mtr above plinth, for
101 Suspended floors, roofs, landings, staircases, balconies,
girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, 479.00 SQM 260.00 #VALUE! #VALUE!
beam etc
102 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)
finished with a floating coat of neat cement including cement slurry, making of lines or
groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm
thick with 20mm thick nominal size aggregate. 70.00 SQM 262.00 #VALUE! #VALUE!

103 Providing and fabricating reinforcement for R.C.C. work

including straightening, cutting, bending, placing in position and binding (including
cost of binding wire) all complete up to floor three level
104
Mild steel and medium tensile bars 5775.00 KG 68.00 #VALUE! #VALUE!

105 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing
R.C.C. slab including cutting chase and making good and painting exposed portion of 22.00 EACH 70.00 #VALUE! #VALUE!
the clamps complete.
106 Plaster on new surface on walls in cement sand mortar 1:6
including raking of joints etc. complete fine finish
107
20 mm thick 3135.00 SQM 148.00 #VALUE! #VALUE!

108
Providing and fixing T-iron frames for doors, windows and
ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10
Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-
coarse sand:6- graded stone aggregate 20 mm nominal size) or with wooden plugs and 745.00 KG 84.00 #VALUE! #VALUE!
screws or rawl plugs and screws or with fixing clipsor with bolts and nuts as required
including fixing of necessary butt hinges and screws and applying a priming coat of
approved steel primer

109 Structural steel work in single section fixed without connecting plate including cutting,
hoisting, fixing in position and applying a priming coat of approved steel primer all
2025.00 KG 69.00 #VALUE! #VALUE!
complete above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and
channels.
110 Finishing wall with water proofing cement paint of approved
brand and manufacture and or required shade to give an even
shade including all scaffolding:
111 New work (Three or more coats)
819.00 SQM 79.00 #VALUE! #VALUE!

112 Wall painting with plastic emulsion paint of approved brand

and manufacture to give an even shade
113 Two or more coats on new work including preparation of base
with primer, putty, lippy complete in all respect 440.00 SQM 72.00 #VALUE! #VALUE!

114 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade of the slab
including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 35.00 SQM 263.00 #VALUE! #VALUE!
4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm :

115 Providing and fixing steel, gate, grating and grills made of angles, tees, square bars,
flats or black pipe with hold fast and fitting complete as per design and drawing
including cutting welding and fabrication with priming coat of red oxide and two coat 300.00 KG 104.00 #VALUE! #VALUE!
of enamal paints.

116 Repair to cement plaster in cement mortar 1:6 (1-Cement:6- fine sand) including
removal of old plaster in regular shape and white or colour washing 336.00 SQM 191.00 #VALUE! #VALUE!

117 Demolishing brick work including stacking of serviceable

material and disposal of unserviceable material within 50 38.70 SQM 425.00 #VALUE! #VALUE!
meters lead.In Cement mortar
118 Demolishing cement concrete including disposal of material
within 50 meter lead1:4:8 or leaner mix 24.67 CUM 301.00 #VALUE! #VALUE!
119
Providing and fixing T-iron frames for doors, windows and
ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10
Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-
coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and 122.00 KG 84.00 #VALUE! #VALUE!
screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required
including fixing of necessary butt hinges and screws and applying a priming coat of
approved steel primer

120 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of
rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm 33.51 SQM 568.00 #VALUE! #VALUE!
distance
121 Glass
122 Glass sheet of weight 10 Kg./ Sqm. (4 mm thick )
59.00 SQM 347.00 #VALUE! #VALUE!
Plain
123
Providing and fixing, flush door shutters non decorative type (hollow core
construction) with internal frame of Ist grade wood having styles and top rails of 100
mm width & bottom and lock rails of 150 mm width with 3 Nos. cross battens of 50
mm thick width using 4 mm thick commercial ply on both faces of shutters & 6 mm
thick beading of respective wood using with approved steel fitting as per Annexure 'A'

124
25 mm thick.Sheesham wood grade – I 34.00 SQM 2012.00 #VALUE! #VALUE!

125 Distempering with dry distemper of approved brand and shade (two or more coats) and
of required shade on new work, over and including, priming coat of whiting to give an 2035.00 SQM 45.00 #VALUE! #VALUE!
even shade including all scaffolding
126 White washing with whiting to give an even shade including all scaffolding
127 New work (three or more coats).
570.50 SQM 12.00 #VALUE! #VALUE!

128 Old work (two or more coats) including scrapping old surface and repairing wherever
necessary 800.00 SQM 7.00 #VALUE! #VALUE!

129 Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse sand:4-graded stone

aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc.
complete :
130
25 mm thick with 12.5 mm thick nominal size aggregate. 264.00 SQM 199.00 #VALUE! #VALUE!

131
P&F Vitrified Porcelain Polished tiles and approved size
(600mmX600mm) as pattern aveen/Bell/Johnson/Kajariya)
388.00 SQM 1123.00 #VALUE! #VALUE!
10mm thick on floor skirting and steps etc. laid with tile
admixture (Roof Pidilite of equivalent) including joints to be filled with tile grout to

132

Providing & fixing steel glazed doors, windows and ventilators shutters of standred
rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long
embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse
sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws
or rawl plugs and screws or with fixing clips or with bolts and nuts as required,
2.00 SQM 1801.00 #VALUE! #VALUE!
including providing and fixing of plain glass panes 4mm thick with copper glazing
clips and special metal-sash putty of approved make, or metal beading with screws
complete including priming coat of approved steel primer, excluding the cost of metal
beading and other fittings except necessary hinges of pivots steel handles and peg stay
etc. as required. windows side hug

133 Providing and fixing Square bars or other flat welded to window, ventilators etc. 10.00 KG 72.00 #VALUE! #VALUE!
134
Providing Cement based water proofing treatment to RCC Roof with brick bats in CM
1:4 (1-Cement:4-Sand) the under layer beihg 20 mm thick bed plaster of cement sand
mortar 1:6 and a neat cement sand mortar plaster of mix 1:4 with neat cement punning
including adding of water proofing compound at all stages at 2 % of weight of cement
including curing etc. complete in all respect. The various stages of exceeding the above
mentioned item of work are as given below.

135
1- Cleaning of RCC roof and applying of neat cement slurry over the roof at the rate
3.00 kg. Of cement P.Sqm. of area mixed with water proofing compound. Thickness
of layer be 1.50 mm.
2- Plastering he base with 20 mm thick cement sand plaster of mix 1:6 with water
proofing compound. 243.00 SQM 406.00 #VALUE! #VALUE!
3- Laying of brick bats with 20 mm thick cement mortar 1:4 with water proofing
compound.
4- Finishing with 20 mm thick cement sand mortar of mix 1:4 mixed with water
proofing compound.

136
Cement concrete pavement of required thickness with 1:2:4 (1-Cement:2-course sand :
18.87 CUM 4109.00 #VALUE! #VALUE!
4-graded stone aggregate 20 mm nominal size) including finishing complete.

137 Distempering with oil bound washable distemper of approved brand and manufacture
to give an even shade including all scaffolding:
138 Old work (one or more coats) including scrapping surface and necessary repairs.same
20.00 SQM 22.00 #VALUE! #VALUE!
colour
139
Desmantling of floring with car including stacking of servceable material and diposal
200.00 SQM 55.00 #VALUE! #VALUE!
of unserviceable material with in 50 Mtr. Lead for Cement concrete flooring.

140 Polished Blue Kota Stone flooring skirting, laid over 20 mm

thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the
slab including rubbing and polishing complete
141 For area of each slab up to 901 to 2000 Sq. Cm40 mm thick slab
10.00 SQM 858.00 #VALUE! #VALUE!
142 Providing & fixing anodizing alumium work (Anodizing to be got done from approved
Anodizer) for doors, windows,
ventilators and partition with extruded built up standard tubular and other sections of
approved make confirming to IS : 733 and IS : 1285 anodised transparent 81 dyed to
required shade according to IS : 1868 (Minimum anodic coating of grade AC 15), fixed
with rawl plugs and screws or with fixing clips or with expansion hold fasteners
including necessary filling up of gas at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitred
and jointed mechanically wherever required inlcuding cleat angle Aluminum snap
beading for
glazing/paneling, C.P. Brass/ Stainless Steel screws, Al.
Tower bolt & Al. handle & Al. Aldrop etc. all complete as per architectural drawings
and the directions of Engineer-incharge. (Glazing and peneling to be paid for
separately).

143
For Fixed portion 310.00 KG 379.00 #VALUE! #VALUE!

144 For shutters of doors, windows & ventilators incl. providing and
fixing hinges/ rollers etc. and making provision for fixing of 140.00 KG 398.00 #VALUE! #VALUE!
fittings wherever reqd. (lockes shall be paid for separately).
145
Providing and Fixing 12mm thick prelaminated three layer
medium density (exterior grade) particle bonded formaldehyde synthetic resin of
approved brand and manufacture in paneling fixed in aluminium doors, windows/
stainless steel screws etc. complete as per architectural drawings and direction of
engineer-in-charge

146 Pre-laminated particle board with decorative lamination on

46.00 SQM 1250.00 #VALUE! #VALUE!
both side
147 Rolling Shutters
148 Rolling Shutters made of 80x1.25mm Machine
rolled lathe 10.00 SQM 245.00 #VALUE! #VALUE!

149 Top cover for rolling shutters

3.04 MTR 158.00 #VALUE! #VALUE!

150 Providing and Fixing mortic lock of

151
Godrej make with C.P. steel handles 19.00 EACH 485.00 #VALUE! #VALUE!

152 Other works

153
Providing and Fixing hydraulic door closure ISI marked 5.00 EACH 756.00 #VALUE! #VALUE!

154 Wiring of light point /fan point/ exhaust fan point /call bell point as per PWD
specification for electrical Works with ISI marked1.5 sq. mm nominal size FR PVC in
sulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm
nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV
grade (IS:694) in recessed ISI marked MMS (IS:9537P-III) vergin material PVC
conduit & it' s all accessories (J.B.,Bendsetc.), round tiles, 18 SWG G.I. box with earth
terminal, 6A switch, 3 pin ceiling rose/ Lamp holder / 3 point Connector, 3.0 mm thick
ISI marked phenolic laminated sheet (IS:2036-1995), Al. alloy /cadmium plate diron
screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making
connections, testing etc.complete as required.

155
Short point (up to 3 mtr.) 39.00 P POINT 185.00 #VALUE! #VALUE!

156 Medium point (up to 6 mtr.) 29.00 P POINT 311.00 #VALUE! #VALUE!
157
Long point (up to 10 mtr..) 31.00 P POINT 419.00 #VALUE! #VALUE!

158
Wiring of 3/5 pin 6 amp .Light plug point as per PWD specification for electrical
Works with ISI marked 1.5 sq.mm nominal size FRPVC insulated unsheathed flexible
copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FRPVC insulated
unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI
marked MMS (IS: 9537 P-III) vergin material PVC conduit & it's all accessories
(J.B.,Bends etc.), round tiles, 18 SWG G.I .box with earth terminal of required size ,6
A switch, 3/5 pin 6A socket, 3.0 mm thick ISI marked phenolic laminated sheet
(IS:2036-1995), Al .alloy / cadmium plate diron screws 20 mm cup washers etc.all as
per pre approved by Engineer in charge, making connections, testing etc. complete as
required. For specification of copper Conductor, Phenolic Laminated sheet's &
Electrical / Wiring accessories

159 On board 45.00 P POINT 87.00 #VALUE! #VALUE!

160 Short point (up to 3 mtr.) 22.00 P POINT 197.00 #VALUE! #VALUE!

161 Medium point (up to 6 mtr.) 17.00 P POINT 322.00 #VALUE! #VALUE!

162 Long point (up to 10 mtr..) 12.00 P POINT 430.00 #VALUE! #VALUE!

163
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI
marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed
conduit/casing capping including making connections etc. as required.

164
2 x 1.5 sq.mm 1130.00 MTE 24.00 #VALUE! #VALUE!

165
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity
not less than 10 KA (B/C tripping characteristic as per type of load and site
requirement) 4 KV impulse with stand voltage, as per PWD specification for electrical
Works with ISI marked IS 8828 (1996) / conforming to IEC 60898-12002, IEC 60947-
2 ,low watt losses, tri free mechanisum, energy limiting of class 3 as per
IEC,minimum phase termination capacity o f 35 sq. mm., conductor line load
reversibility , label holding facility, IP 20 contact protection and fitted with existing
distribution board / sheets, min. operation 20,000 up to 32 A rating and 10,000 up to 63
A ,5000 for 80 A rating including making connections, testing etc. as required.

166
6 A to 32 A rating 5.00 EACH 888.00 #VALUE! #VALUE!
167
Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity
notless than10 KA (B / C tripping characteristic as per type of load and site
requirement) 4 K V impulse withstand voltage, as per PWD specification for electrical
Work s with ISI marked IS 8828 (1996) / conforming to IEC 60898-12002, IEC
60947-2, low wattlosses, trip free mechanisum,energy limiting of class 3 as per IEC,
minimum phase termination capacity of 35 sq.mm., conductor line load reversibility,
label holding facility, IP 20 contact protection and fitted with existing distribution
board/ sheets, min. operation 20,000 up to 32 A rating and 10,000 upto 63A, 5000 for
80A rating including making connections, testing etc.as required. Double pole MCB

168
6 A to 32 A rating 15.00 EACH 405.00 #VALUE! #VALUE!

169 Providing & Fixing of IP 20 box made out from 1.2 mm thick CRCA sheet steel with
depth of minimun30 mm and finished with powder coating and suitable form ounting
LED tube including side covers, holders, internal wiring to illuminate the single sided 49.00 EACH 211.00 #VALUE! #VALUE!
connection LED tube.(With out tube).All as per pre approved by Engineer in charge
Suitable for 4' LED Tube shape fixture 1 X 18/20 W
170
Providing & Fixing of Fluorscent tube rod in existing fixtures as required complete in
49.00 EACH 46.00 #VALUE! #VALUE!
all respect.All as per pre approved by Engineer in charge 18/20 Watts

171 P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaust
fan,IS:2312 marked in existing opening including making connections testing etc. as 10.00 EACH 2252.00 #VALUE! #VALUE!
required. 300 mm sweep(900/1400 RPM)
172
Providing & Fixing of ISO Certified company made BEE Star rated copper wounded
double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan as per
PWD specification for electrical Works, conforming to IS:374-2019, & IS:1885-P-V-
1981. with down rod up to 30 cm with secondary support safety cable (steel wire), 22.00 EACH 1559.00 #VALUE! #VALUE!
cotter pin with 3x1.5 sq.mm pvc insulated flexible copper conductor making
connection testing etc.as required. 1400 mm Sweep BEE 2 Star rated (service value> =
4.5 to < 5 )

173
Providing & Fixing of IK 07 IP 66 protected LED Street Light Luminaire on existing
bracket/ pole .Fixture made of powder coated single piece pressure die cast aluminum
LM 6 / A DC 12 material with heat dissipation fins on housing with UV stabilized PC/
Toughened Glass cover (UVstablzation report submitted for UV cover) and secondary
lens on each LED & should be SMD type. The System level Luminaire efficacy>=120
lm / wt with High Power LED s is to be used and potted driver must be potted & has a
unique BISR number with Input Voltage AC 120 to 270 V AC with High voltage Cut
off @ > = 300 V AC and Auto resetting Safety, Input Frequency 50Hz ± 3 % Power
Factor > 0.95 driver Efficiency > 85%, THD (I) < 10 % Humidity 10 % to 90 % RH 8.00 EACH 5104.00 #VALUE! #VALUE!
Working Temp-5 C to 45 C. driver current < 1000 m A shown in LM 79 report. The
luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than
50000 burning hrs with Minimum 70 % lumen maintened, color Rendering Index > 70
and CCT 5700 K + 355 K. Surge protection shall be min ≥ 4 K V internal and min 10
KV external. driver should be Phase to phase protection o 40 V for 4 Hrs.
Manufactures Word Mark / Name Engraved / Embossing on die cast housing to allow
trace ability / authenticity. Fixture shall be AS PER IS 10322 Complianced. LED Street
Light fixture 70 Watt

174 Providing & Fixing of Normal / High Out put High pressure sodium vapour / Metal
halide / Halogen lamp as required complete in all respect.All as per pre approved by 8.00 EACH 267.00 #VALUE! #VALUE!
Engineer in charge. 70 Watt
175
Supply, Installation, Testing and Comissioning of ISO certified company made Air
Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE
amended up to date complete with Indoor unit (IDU), Out door unit (ODU), surface /
concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile
rubber tubular pipe section ) up to 3 Mtr ( IDU to ODU ), copper power cable up to 3.5
Mtr ( IDU to ODU ), R-32 / R-410 / R-407 Green Refrigerant, wireless Remote
control, suitable for working between 180-260 V with low & high voltage cut off and
50 hz, 1phase AC supply capable of performing cooling, dehumidification, air
circulation of following capacity with Scroll / rotary compressor. Min 5year OEM
warranty both compressor and PCB. Invertor Type

176
1.5 TR with 5 star rating of BEE (ISEER not less then 4.7 ) 3.00 EACH 52865.00 #VALUE! #VALUE!

177 P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan
(IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making 5.00 EACH 972.00 #VALUE! #VALUE!
good the wall and floor (excluding the pair of foot rest.) Size 510 mm
178 P & F High Level Flushing Cistern of 10 litres capacity of approved make including
C.I. brackets duly painted, chain & pull and 32 mm dia G.I. concealed flush pipe with
M.S. clamps, 20 mm dia G.I. overflow pipe upto 185 cm. Long, brass ball cock 7.00 EACH 1657.00 #VALUE! #VALUE!
(IS :1703 Mark) with PVC ball and internal fittings and mosquito proof coupling,
complete including cutting and making good the wall.
179 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia
G.I. waste pipe, dome waste couplings, concealed iron
brackets or screws etc complete.
180
Flat Back (small) size 456x355x265mm 7.00 EACH 1332.00 #VALUE! #VALUE!

181 P & F Flush Pipe of approved make with complete fittings for high level flushing
7.00 EACH 399.00 #VALUE! #VALUE!
cistern: G.I. `B` class (Concealed) 25mm.
182 P & F C.P. Brass flush Valve with C.P. flush bend of approved make. Lever type with
7.00 EACH 2328.00 #VALUE! #VALUE!
Elbow 32 mm dia
183 P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I.
brackets duly painted,1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P.
8.00 EACH 1824.00 #VALUE! #VALUE!
brass waste coupling of approved make, 25 mm G.I. waste pipe complete including
cutting & making good the wall.: Size 510 mm x 400 mm
184
Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light
green, light blue and other light shades glazed tiles confirming to IS : 13753 &
IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of
118.00 SQM 613.00 #VALUE! #VALUE!
neat cement slurry finished with flush pointing in the white cement mixed with
pigment to match the shade of the tile complete (excluding the cost of cement plaster
on walls and pillar).

185 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) &
MS clamps including cutting and making good the walls and floors:
186
15 mm dia nominal bore 70.00 MTR 160.00 #VALUE! #VALUE!
187
25mm dia nominal bore 30.00 MTR 209.00 #VALUE! #VALUE!

188 Making connection of G.I. distribution branch with G.I. main including all fitting.
8.00 EACH 354.00 #VALUE! #VALUE!
Beyond 25mm & upto 100mm dia
189 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400
28.00 EACH 271.00 #VALUE! #VALUE!
grm,15mm nominal bore.
190 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 400
13.00 EACH 290.00 #VALUE! #VALUE!
gm. 15mm nominal bore.
191 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of
approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long
wash out pipe with plug & socket, including making connection etc., complete of
approved design:
192
500 litres capacity 7.00 EACH 3240.00 #VALUE! #VALUE!

193
1000 litres capacity 1.00 EACH 6480.00 #VALUE! #VALUE!

194 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all
respect of size :
195 15mm dia nominal bore 7.00 EACH 92.00 #VALUE! #VALUE!
196
25mm dia nominal bore 7.00 EACH 149.00 #VALUE! #VALUE!

197
Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651 marked) of approved
make with spun yarn & stiff mixture of cement mortar 1:1, excavation & refilling of
75.00 MTR 229.00 #VALUE! #VALUE!
earth in all types of soil upto 1.2m depth, S.W. fittings, including testing of joints etc,
complete. 100mm dia

198
Construction of soakage well in all type of soil with 300 mm thick dry masonry, top
and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1
: 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as
per approved drawing including disposal of earth within a lead of 50 mtr

198.1
Size 300 Cm. dia outside & 300 Cm. depth 5.00 EACH 19946.00 #VALUE! #VALUE!

199 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6,
15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab
covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja, 50 mm
thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating
cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro 1.00 EACH 21598.00 #VALUE! #VALUE!
cement cover with frame, earth work etc. complete as per approved drawing including
disposal of surplus earth within a lead of 50 mtr:- Size 200x100x130 cm.(for 10 users)

200 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings
type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved
quality /make
201
Door Bend 87.5 Dg. 110mm dia 21.00 EACH 113.00 #VALUE! #VALUE!

202
Bend 45 Dg. 110mm dia 14.00 EACH 96.00 #VALUE! #VALUE!

203
Pipe Clip 110 mm dia 17.00 EACH 22.00 #VALUE! #VALUE!

204 Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for
precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for
the use of interlocking concrete block pavement)
205 M-30, 60 mm thick to be used in non traffic areas like building premises, monument
premises, land scapes, public gardens/ park, domestic drives, paths and patios,
Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 340.00 SQM 781.00 #VALUE! #VALUE!
15658:2006(A)Category A Denated units to key into each other on four faces zigzag
shape as per IRC SP 63:2004
206
DISMANTLING OF EXISTING RCC OHSR 250 KL Demolishing cement concrete
including disposal of material within 50 meter lead : 1:3:6 or richer mix.
18.00 CUM 419.10 #VALUE! #VALUE!

207
Demolishing of R.C.C. work including stacking of steel bars and disposal of unserviceab le
material within 50 meters lead.
102.00 CUM 610.50 #VALUE! #VALUE!

208
Extra for scraping, cleaning & straighting reinforcement bars from RCC or RB work 80.25 QTL 120.00 #VALUE! #VALUE!

209 Demolishing brick work including stacking of serviceable material and disposal of unserviceable
material within 50 meters lead. In Cement mortar.
12.00 CUM 354.20 #VALUE! #VALUE!

210
Channels, angles, tees & flats. 80.25 QTL 46.00 #VALUE! #VALUE!

211
Extra for cutting reinforcement bars in R.C.C. or R.B. work (payment shall be made on the cross
sectional area of RCC or RB works.).
621.00 SQM 190.30 #VALUE! #VALUE!

212 Add extra for all type of dismantling work for each subsequent storey or height more than 4.5
meter :
213
FOR RCC WORK : Upto 9 mt (20 %) @ Rs 610.50 9.00 CUM 122.10 #VALUE! #VALUE!

214
FOR RCC WORK :Upto 13.50 mt (40 %) @ Rs 610.50 9.00 CUM 244.20 #VALUE! #VALUE!

215
FOR RCC WORK :Upto 18 mt ( 60 %) @ Rs 610.50 9.00 CUM 366.30 #VALUE! #VALUE!

216
FOR RCC WORK :Upto 18 to 22.50 mt ( 80 %) @ Rs 610.50 18.00 CUM 488.40 #VALUE! #VALUE!

217 FOR STEEL WORK : Upto 6 qtl t (30 %) @ Rs 46 6.00 QTL 13.80 #VALUE! #VALUE!
218
FOR STEEL WORK :Upto 6 qtl mt (60 %) @ Rs 46 6.00 QTL 27.60 #VALUE! #VALUE!

219
FOR STEEL WORK :Upto 6 qtl ( 90 %) @ Rs46 6.00 QTL 41.40 #VALUE! #VALUE!

220
FOR STEEL WORK :Upto 18 to 22.50 mt ( 120 %) @ Rs 46 18.00 QTL 55.20 #VALUE! #VALUE!
Total in Figures #VALUE! #VALUE!

Quoted Rate in Figures 0.00 #VALUE!

Select

Quoted Rate in Words #VALUE!

Please Enable Macros to View BoQ information
Q information