This candidate has over 29 years of experience in the oil and gas industry, including project management, design, construction, and operations. They have led projects involving pipelines, compressor stations, and processing facilities around the world. More recently, they have focused on feasibility studies and front-end engineering for natural gas transportation and infrastructure projects.
Download as TXT, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
147 views
Project Manager-Engineer
This candidate has over 29 years of experience in the oil and gas industry, including project management, design, construction, and operations. They have led projects involving pipelines, compressor stations, and processing facilities around the world. More recently, they have focused on feasibility studies and front-end engineering for natural gas transportation and infrastructure projects.
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3
Career Experience
29 years of experience in Design, Construction and Project Management of Oil & G
as Pipeline Systems, Pump, Power and Compressor Stations, Oil and Gas Process Pl ant and Power Generation, National & International activity includes: Project Management Construction Management Start-Up & Operations Planning Project Cost Control Bid Preparations Procurement & Materials Control Design & Development Schedule/ Finance Planning. Routing & Location Studies Permit Applications Feasibility & Cost Studies Specifications Writing & Q.A. Insp. Management and Project Design Highlights 1984-2010 Virtual Ventures LLC. Director of Research Campbell River, BC, Canada, San Diego,CA,USA Consulting Group Specializing in Feasibility & Front- End Engineering in Hydraulics of Oil & Gas Transportation, Gas Turbine-Compressor selection, an d Commissioning of related infrastructure. Development Consultant & co-author of patented ship/process system for transpor t and storage Of natural gas in hydrocarbon liquid matrix SeaOne Maritime Corp (2004 2006 2 009) Natural Gas / LNG Interchangeability Consultant retained by Florida Gas Transmi ssion for providing preparation and expert witness testimony for FERC hearings and negotiations for introduction of LNG to their market area. Developed program tool for defining gas combustion characteristics and served on National Gas Cou ncil Task Group for preparation of Whitepaper for FERC and DOE.(2004,2005) contr ibuting to FERC ruling on Guidelines for US LNG Imports. Mackenzie Gas Project, Hydraulics Analyst on team preparing Design Alternatives ( Gas, NGL, Multiphase, Densephase ) for Exxon Mobil / Imperial Oil (2003) Lecture and training seminars for staff involved in the 4,000 km West-East Pipe line. Topics covered included advanced gas transmission design, strategic proje ct planning, risk analysis, and management of construction, environmental & safe ty policy, commissioning and operations. PetroChina (2002) Contributor of Hydraulic Design and Costing Section for Multi Client Study of A rctic Gas Pipeline, LNG and GTL Alternatives by Purvin & Gertz (2000) Commissioning & Construction manager for completion of OH3 Oil Pipeline for Ana darko Algeria Corp/Sonatrach HC including application of Winter countermeasures to hydrate problems at Hassi Berkine CFP Oil Production Plant. GEI/Halliburton joint project (1999) Development Strategy Report for jet fuel pipeline network for major airports in U.K. for GIE-Serko (1998) Principal Designer and Strategist for $4 billion, 3,000 km Mixed Gas Pipeline, Compressor Stations and Natural Gas/NGL Process Plant Concept. Project built as Alliance Pipeline between Western Canada & Chicago. Co-inventor for 6 patents is sued internationally for design of this type of high pressure, high efficiency r ich gas transportation. Preparation of Bid Packages, Risk Report pipeline and co mpressor station Permit Applications for NEB / FERC, outage statistics, commissi oning and operating manuals.(1996-1997) Project Manager for Materials and Stock Review Project for ADNOC Abu Dhabi. Id entified surplus stock for all national operations of refineries and gas plant i nfrastructure. Reorganized warehousing under computer control and introduced sta tistical risk based materials control plan, and automated purchasing. (1992-1995 ) Designer-Development engineer for concept, construction planning and laboratory component testing and manufacture for thermally pre-tensioned liquid sulphur p ipeline for Caroline Gas Project. Shell Canada (1992) Design Consultant subcontracted to Technip, Paris, responsible for design and p roject planning operations for Abu Dhabi pipeline clients. Projects included pla nning of gas process plant shutdowns, overhaul of generating and compression equ ipment, plant modifications for lean gas injection, crude oil line expansion des ign. Clients included ADNOC (Ruwais) and Gasco (Bab/Habshan). (1984-1991) 1982-84 InterCity Gas Manager Facilities Planning Quebec City, Canada In charge of 30-person team for statistical load evaluation, specifications and design of City Pipe Networks and City Gate Stations for Gas Service to 28 towns & cities in the province of Quebec & construction of 1,140 km of associated tr ansmission pipelines and one 11 MW electric compressor station. Author of cost s tudies for successful Federal Government funding. Responsible for commissioning and operating manuals. (1982-1984) Lead Team producing design and cost studies for permit application in company b id for building pipelines and compressor station for natural gas service to 14 t owns on Vancouver Island (1984) 1979-81 Petrotech Lavalin Senior Engineer Calgary, AB, Canada Primary Designer & Construction and Commissioning Engineer of St Lazare Boisbr iand section of 1600 km Trans Quebec Maritimes Gas Pipeline System including Lac Des Deux Montagnes water crossing. Specifications, procedures & design concept applied to complete project. (1980-1981) Commissioning Engineer Rio Dulce Santo Tomas Oilfield Development, Guatemala. In charge of startup and final construction of oil pipeline, oil field receivi ng plant for H2S extraction, and ship loading terminal. Superintended operator training and plant operations at project completion. (1979-1980) 1974-79 Williams Brothers Canada Ltd. Project Engineer/Manager Calgary, AB , Canada Project Manager for Olds Sour Gas Gathering System. In charge of team providing routing, surveying and design of flow lines from nine sour gas wells (38% H2S) to process plant. Mandate included safety risk analysis, supply of electrical po wer and design of Control/Scada Systems and wellhead heaters. (1979) Design & Operations Planning of Windsor Salt Cavern NGL Storage facilities. In charge of specification and design execution of above ground metering, pumping a nd dehydration trains for injection and extraction of LPG products. Cochin Pipel ine (1977) Project Engineer for Design and Construction Documentation/Contracts of Heavy O il & LACT Systems for Wainright Expansion. 8 to 16 OD Blended/Hot Oil and 3 to 8 Condensate Pipelines Husky Oil (1975-77) Construction Engineer for East Kootenay Link Pipeline across Purcell Mountain R ange. Responsible for environmental restoration program during summers. Managed hydrostatic and air testing as well as start-up preparation under winter conditi ons .Inland Natural Gas (1974-1975) 1972-74 Gulf Oil Canada Ltd. Planning Engineer & Market Analyst Vancouver, BC, Canada Project Manager for design and construction of Bulk Plant and Service Station C onversions to handle unleaded gasoline. Responsible for quality assurance audits on lead contamination. (1973-1974) Analyst for conducting Market Studies and Collection of Retail Data for statist ical monthly/annual planning and marketing requirements. (1972-1974) 1966-71 Mather & Platt Ltd. (Weir Pumps) Apprentice/Commissioning Engineer Manchester, UK Pump designer and research engineer for boiler feed and nucl ear cooling pumps. Conducted research work at National Physical Laboratories, Ca mbridge, resulting in design of anti-cavitation impellers. (1970- 1971) Apprenticeship as Millwright and Commissioning Engineer in company workshops. T raining included metal casting, machining and assembly of pumps, steam turbines, electric motors, and food process equipment made at factories in UK and France. Obtained graduate membership of Institution of Mechanical Engineers. Training w as on a co-operative basis between college semesters and during summers ( 1966-1970) Education & Registration HND (Mech Eng.) with I.MechE endorsement - Hatfield Polytechnic, University of H ertford, England (1970) Part IIIB Organization & Management I Mech. Eng. UK (1972), Registered P. Eng - .APEBC Canada (1972/2004) Can re register as P. Eng on resumption of full residence in Canada.