Scribd
Upload
84 views

General - Power Plant Control

The document summarizes the control systems used in coal/oil-fired and combined cycle power plants. For coal/oil-fired plants, it describes the high-level control including load control, boiler pressure control, and turbine load control. It also outlines the low-level boiler control, boiler protection system, balance of plant control, and burner and steam turbine management. For combined cycle plants, it discusses similar high-level automatic power regulation and plant startup/shutdown controls along with low-level boiler protection, balance of plant, gas turbine combustion control, and steam turbine controls.

Uploaded by

sizmaru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views

General - Power Plant Control

The document summarizes the control systems used in coal/oil-fired and combined cycle power plants. For coal/oil-fired plants, it describes the high-level control including load control, boiler pressure control, and turbine load control. It also outlines the low-level boiler control, boiler protection system, balance of plant control, and burner and steam turbine management. For combined cycle plants, it discusses similar high-level automatic power regulation and plant startup/shutdown controls along with low-level boiler protection, balance of plant, gas turbine combustion control, and steam turbine controls.

Uploaded by

sizmaru
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sept.

2017
POWER PLANT CONTROL Rev. 0

CONTENTS Power Plant Control

1. A Preface Power Plant 에서 사용되고 있는 Control Group 에 대한 주요항목에 대하여 정리한다.


2. General
이외 3rd Part(Package System)에 대해서는 기재를 하지않았고 차후에 별도로 설명한다.
Control System
Power Plant 에서 사용하고 있는 Package System 은 대략 12 가지 정도이다.
Power Control
3. Operation
4. Protection 1. Coal/Oil Fired Power Plant
5. Control Loop 가) High Level Control
6. Control Logic 1) Unit master
7. Macro  Load Control : Load Setter
8. Others
 Boiler Master : Main Steam Pressure Control(Fuel & Air Control)
9. Process Tuning
 Turbine Master : Load Control(MW Control)

2) APS(Automatic Plant Star-up & Shut-down)


 Start-up Sequence
 Shut-down Sequence

나) Low Level Control


1) Boiler Control
 Fuel / Air Flow Control

2) BPS(Boiler Protection System)


 MFT(Main Fuel Trip)
 Trip Sequence

3) BOP(Balance Of Plant) Control


 Feed Water Control : Variable Speed Pump
 Drum Level Control
 Steam Temp Control : Water Spray, GRF(Gas Recirculating Fan, Buner Tilt)
 Etc.

4) BMS(Burner Management System)


 Oil Burner
 Pulverizer

5) Steam Turbine Control


 Speed Control
 Load Control
 Turbine Bypass Control

2. Combined Cycle Power Plant


가) High Level Control
1) APR(Automatic Power Regulation)
 Load Control : Total Load Setter
 GT Load Control : Each GT Load Setter

2) APS(Automatic Plant Star-up & Shut-down)

+82. 10. 9097. 2382 [email protected] http://blog.naver.com/ysuh6067 1


YongSeok Uh
Sept. 2017
POWER PLANT CONTROL Rev. 0

CONTENTS  Start-up Sequence


 Shut-down Sequence
1. A Preface
2. General 나) Low Level Control
Control System 1) BPS(Boiler Protection System)
Power Control
 MFT(Main Fuel Trip)
3. Operation
 Trip Sequence
4. Protection
5. Control Loop
2) BOP(Balance Of Plant) Control
6. Control Logic
7. Macro  Feed Water Control : Variable Speed Pump
8. Others  Drum Level Control
9. Process Tuning  Steam Temp Control : Water Spry Control

3) Gas Turbine Control


 Combustion Control : Fuel/Air Ratio Control
 Load Control
 Speed Control

4) Steam Turbine Control


 Speed Control
 Load Control
 Turbine Bypass Control

+82. 10. 9097. 2382 [email protected] http://blog.naver.com/ysuh6067 2


YongSeok Uh

You might also like