Scribd
Upload
260 views8 pages

ME 101-Final Exam

This document is a final exam for a mechanical workshop practice course. It consists of 4 questions testing knowledge of various machine tools and their parts and operations. The questions are a mix of true/false, multiple choice, labeling parts of diagrams, and naming parts and their functions. The exam covers topics like lathe, shaper, milling machine parts and operations such as facing, tapping, spot welding, and gear cutting.

Uploaded by

Saad Rasheed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
260 views8 pages

ME 101-Final Exam

This document is a final exam for a mechanical workshop practice course. It consists of 4 questions testing knowledge of various machine tools and their parts and operations. The questions are a mix of true/false, multiple choice, labeling parts of diagrams, and naming parts and their functions. The exam covers topics like lathe, shaper, milling machine parts and operations such as facing, tapping, spot welding, and gear cutting.

Uploaded by

Saad Rasheed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

ME-101- Mechanical Workshop Practice Final Examination

January 2022 Marks: 50

Name: _____________________ Reg. No. _______________ Section: ____________


Instructions:
 Use of unfair means will lead to cancelation of the examination.
 The Final exam consists of 4 Questions.
 Fill the circles carefully.
 Double circles will be marked as incorrect

Page 1 of 7
Q.1: True/False
1. Tool angles are same in both shaper and lathe machine
a) True b) False

2. In lathe machine, chuck is used for holding various cutting tools:


a) True b) False

3. Center punch is used to mark the point of Drilling to prevent slippage:


a) True b) False

4. In four jaw chuck all the teeths of chuck move independently:


a) True b) False

Q.2: Multiple Choice Questions:


5. Facing operation is normally performed on ______ Machine.
a) Drill b) Grinding
c) Lathe d) All of these

6. A Tap is a cutting tool used to create ________.


a) External threads b) Internal threads
c) Hole d) Flat plane surface

7. Spot welding is a type of ___________.


a) Arc welding b) Resistance welding
c) Plasma welding d) none of these

8. File is a tool used for:


a) Finishing cutting b) Rough cutting

Page 2 of 7
c) Rubbing d) Cutting

9. Taper cutting formula is ____________.


a) OD/N+2 b) N+2/D
θ 2−θ3
c) OD-2M d) θ=tan −1( )
2L

10. Lathe machine chuck is used for _______


a) Holding of work piece b) Holding of cutting tools
c) Both d) None of these

11. T-slot operation is performed on ________.


a) Lathe b) Vertical milling
c) Shaper d) Horizontal milling

12. Shaper machine performs cutting in ________ stroke:


a) Backward b) Cross-slide
c) Forward d) None of these

13. GTAW is also known as _____________.


a) MIG welding b) Arc welding
c) Gas welding d) TIG welding

14. GMAW is also known as _____________.


a) MIG welding b) Arc welding
c) Gas welding d) TIG welding

15. Try square is used for _________.

Page 3 of 7
a) Surface leveling b) Right angle
c) Cutting d) None of these

16. Scriber is used for:


a) Marking b) Cutting
c) Punching d) All of these

17. Gears that can be cut on milling machine:


a) Spur gear b) Helical gear
c) Spiral bevel gear d) All of these

18. The part of lathe that serves as a housing for driving the pulleys and back gear is:
a) Carriage b) Tail stock
c) Head stock d) Bed

19. Angular milling can be performed on:


a) Vertical milling b) Horizontal milling
c) Both d) None of these

20. Slotting can be performed more effectively on _______.


a) Lathe b) Vertical milling
c) Horizontal milling d) both b and c

21. The following is also known as Tool rest


a) Saddle b) Cross slide
c) Compound rest d) Tool post

22. The chuck key may____ be left in the chuck.

Page 4 of 7
a) Sometimes b) Only in special cases
c) Always d) Never

23. The knee is _____ adjustable in the horizontal column and knee type milling machine.
a) Horizontally b) Vertically
c) Both d) None of these

24. The milling cutters are revolving tools having _____ cutting edges:
a) One b) Two
c) Three d) None of these

25. This type of cutting tool has teeth in diagonal ridges or row:
a) Planes b) Files
c) Hack saw d) Surform

26. An adjustable metal device used for holding metal for forming or cutting:
a) Sawhorse b) Steel file
c) Chalk line d) Bench vise

27. Pinning of file is removed by _____


a) Wire brush b) Dresser
c) File card d) File handle

28. Files should always be used with the handles fitted on, otherwise they may:
a) Scratch the surface of the work piece b) Slip from your grasp easily
c) Prevent proper cutting of the metal d) Pierce your hand with their tangs

Page 5 of 7
Q.3: Name the following part and also write its function (12 Marks):

Parts Name Function


A

Page 6 of 7
F

Q.4: A milling machine is shown in the figure below: Name the type of milling machine (1
mark), label the parts (5 marks) and also write down the function of any 4 major parts (4
marks).

S.N Part Name Function


o
1

Page 7 of 7
4

Page 8 of 7

You might also like