DPT100: single phase

single-function transducers Accurate

class 0.2, 0.5 & 1
USB
programming
Response time
~100-220 ms
Compact size

Compact, long range site configurable transducers Teguh Waluyo

08212 4272 464
Cewe - Secure

DPT100 is a range of compact, configurable single measurand

transducers designed to meet the demanding needs of supply
utilities and industrial applications. It offers accurate true-RMS
measurements for high efficiency and quick response time. It is
equipped with two load-independent, galvanically-isolated
analogue outputs that can be configured for desired input
range and output curves.
Ÿ Best in class response time
Ÿ Long range, site-configurable inputs and outputs
Ÿ Load-independent accuracy on all outputs
Ÿ Diagnostic LEDs
Ÿ Compact footprint

System Measurement functions Output type Output range no. of Accuracy class
(Measurands) outputs

AC Voltage, current, Option for 0-20 mA, 4-20 mA, 0-10 mA, 0-5 mA* 2 0.2, 0.5, 1.0
frequency, active power mA or V 0-2 mA*, 0-1 mA*, 0-5 V, 0-10 V

DC Voltage, current Option for 0-20 mA, 4-20 mA, 0-10 mA, 0-5 mA* 2 0.2, 0.5, 1.0
mA or V 0-2mA*, 0-1 mA*, 0-5 V#, 0-10 V#

*available in accuracy class 1.0

#Available with DC Voltage function only
DPT100: single phase
Output cuves

Curve A Curve B
Linear Linear with live zero

Output Output

Input Input

Curve F Curve F
Compressed upper region Compressed lower region

Output Output

Input Input

Mechanical dimensions
105 mm
75 mm

45 mm Top view Isometric view

Front view
Technical specifications
Variants

AC/DC voltage
Nominal input (Un) 57.7 to 415 V
Measuring range 0 to 130 % Un (up to 500 V)
Measurement frequency 50/60 Hz (±5%)
Burden ≤0.2 VA
Maximum overload voltage 1.3 x Un continuously (500 V max.)
2 x Un for 1 s, with up to 10 repetitions at 10 s intervals
Scale factor 0.8 to 1.3 Un
For self-powered variant (AC/DC Voltage)
Measurement range 80 to 276 V AC/DC
Measurement range 0 to 110% Un
Burden ≤6VA, 3W with one output at 750 Ω
≤7VA, 3.5W with two outputs at 750 Ω each

AC current
Nominal input (In) 1 A to 5 A
Measuring current range 0 to 150% In
Scale factor 0.6 to 1.5 of In
Burden ≤0.2 VA
Maximum overload current 2 x In continuously
20 x In for 1 s, with up to 10 repetitions at 100 s intervals

DC current
Measurement input range -20-0-(+20) mA directly, or -300-0-(+300) mV through shunt

Frequency
Nominal input voltage (Un) 57.7 to 415 V
Measurement range 45 Hz to 55 Hz or 55 Hz to 65 Hz
Accuracy ±0.2%

Active Power
Nominal input voltage (Un) 57.7 to 415 V
Input voltage range 0 to 130 % Un (up to 500 V)
Nominal input current (In) 1 A to 5 A
Input current range 0 to 150% In
Measurement frequency 50/60 Hz (±5%)
Scale factor 0.5 to 1.5 of Un x In (at unity power factor)

High auxiliary
Nominal voltage range 80-276 V AC/DC (±10%)
Frequency 50/60 Hz
Maximum burden ≤6VA, 3W with one output at 750 Ω
≤7VA, 3.5W with two outputs at 750 Ω each

Low auxiliary
Nominal voltage range 24-80 V DC (±10%)
Maximum burden ≤3 W with one output, ≤4 W with two outputs
Self-powered (only for voltage transducers)
Nominal voltage range 80-276 V AC/DC
Maximum burden ≤6VA, 3W with one output at 750 Ω
≤7VA, 3.5W with two outputs at 750 Ω each
DPT100: single phase
Technical specifications
Analogue outputs
Type mA or V
Maximum load resistance ≤750 Ω for 20 mA, ≥2 kΩ for 10 (for each output)
Response time 5 cycles measurement (≤100-220 ms)
Ripple <0.4 % peak to peak
Temperature range
Operating range -5 °C to +55 °C
Functional range -25 °C to +70 °C
Usage group 1
Mechanical
Dimension (W x H x D) 45 x 75 x 105 mm
Weight 0.4 kg (approx.)
Material Fire-retardant polycarbonate (PC-FR), UL94 V-0
Mounting DIN (EN 50022)
Connector type Screw terminals
Conductor size for terminals ≤4 mm2
Environmental
Protection class II (double insulation) EN 61010-1
Pollution degree 2
Installation category CAT III for < 300V AC and CAT II for < 600V AC
Protection degree Protection housing: IP 40, terminals: IP 20
Compliance
Standards IEC 60688, IEC 61010-1, IEC 61010-2-30,
IEC 61326-1, DIN 50022
Communication ports
Micro USB For on-site configuration
can be configured without auxiliary power
Configuration software tool ConfigView
For on-site configuration of measurement inputs, measurands, output curve and
online parameter reading. It can be freely downloaded from
www.cewesecure.se

Ordering key
DPT XXX-1YY X X X - 1 Y Y
Example
Specifications are subject to change without prior notice

DPT 611-126
where high auxiliary (6), Output Accuracy
mA output (1), accuracy class 0.2, 1: mA# 1: Cl 1.0 Function
function (6) 2: V 2: Cl 0.2 1: Voltage AC/DC
Aux supply HW Configuration 5: Cl 0.5 2: Current DC#
6: High 1 : Default** 7: Accuracy 3: Frequency
7: Low 2 : DC Current as per 5: Current AC
*Self powered is voltage transducer only.
8: Self Powered* configuration 6: Active Power
** Default means AC/DC voltage, AC current
#Current DC available only in
HW configuration: DC Current, output: mA

Australia Europe India, SE Asia, Africa UAE UK

[email protected] [email protected] [email protected] [email protected] [email protected]
www.securemeters.com/au www.securemeters.com/eu www.securemeters.com/in www.securemeters.com/me www.securemeters.com/uk

www.cewesecure.se
02-18/Ver 2.0