Estane® 54610 TPU

Technical Data Sheet

®
Type: Estane 54610 is an 85A aromatic Polyester-Based Thermoplastic Polyurethane (TPU).

Features: Good physical properties and chemical resistance and wide processing window for calendering.

Uses: Melt coating/calendering, flat die/cast film extrusion.

Physical Properties Value (Metric) Unit Test Method

Hardness (5 sec) 85 +/- 3 Shore A ASTM D-2240
Specific Gravity 1.20 ASTM D-792
Tensile Strength 5400 (37.2) psi (MPa) ASTM D-412
Ultimate Elongation 620 % “
Tensile Stress at
- 100 % Elongation 770 (5.3) psi (MPa) ASTM D-412
- 300 % Elongation 1200 (8.3) psi (MPa) “
Tear Strength
Graves 400 (7.2) lb/in (kg/mm) ASTM D-624 (die C)
Trouser 150 (2.7) lb/in (kg/mm) ASTM D-470
Taber Loss (1000 rev) 0.0012 (34) oz (mg) ASTM D-3389 (H18, 1000g)
Tm (by DSC) 248 (120) °F (°C) Lubrizol Advanced Materials
Tg (by DSC)
-13 (-25) °F (°C) Lubrizol Advanced Materials

• Prior to testing samples were conditioned at 23°C for 48 hours.

• Based on extruded sheet (30 mils).
• Listed values are “typical (average) values” and should / cannot be applied for specification purposes.

Supply Form and Standard Packaging

®
• Estane 54610 TPU is supplied in pellet form and packaged in 50 lb bags or 1000 lb boxes.

Material Preparation
®
• Prior to processing, Estane 54610 TPU must be dried at 220°F (104°C) for 2-4 hours.
• It is recommended to dry the material in a desiccant type dryer. Target dew point should be -40°C.
• Depending on the applied processing technique, the maximum moisture level should be 0.02%.

Processing Conditions
®
• Estane 54610 TPU can be processed on any conventional extruder.

The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be
obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have
been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties
or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc.
shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc.’s direct control. The SELLER MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered
as permission, recommendation nor as an inducement to practice any patented invention without permission of the patent owner.

contact us at
© 2018 The Lubrizol Corporation.
All rights reserved. All marks are the property of The Lubrizol Corporation. [Link]

LUBRIZOL
ENGINEERED
ADVANCING MATERIALS.
POLYMERS ELEVATING PERFORMANCE.
 Estane® 54610 TPU • Issue date: 03/14
Issue nr: 1/1 • Owner: LH

Recommended Starting Extrusion Temperature Profile:

°F/°C

Zone 1 340/171
Melt Temp. Mid-Range: 365°F/185°C
Zone 2 350/177 Screen Pack Recommendation: 20/40/80

Zone 3 360/182
Zone 4 370/188
Adapter (5) 370/188
Die Zone 1 (6) 370/188

Die Zone 2 370/188

Application Information: High Performance Film & Sheet

Properties Value (Metric) Unit Test Method

Tensile Set (200% elongation) 11 % ASTM D-412

USP Class VI Status Not Tested
FDA 177.1680 (dry bulk foods) COMPLIES
FDA 177.2600 (wet/fatty foods) COMPLIES
*For repeat use applications only.

For further information refer to Lubrizol Advanced Materials processing guides.

The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be
obtained. The information often is based on laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have
been tested for stability and should be used only as a suggested starting point. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties
or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc.
shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc.’s direct control. The SELLER MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered
as permission, recommendation nor as an inducement to practice any patented invention without permission of the patent owner.

contact us at
© 2018 The Lubrizol Corporation.
All rights reserved. All marks are the property of The Lubrizol Corporation.
[Link]

LUBRIZOL
ENGINEERED
ADVANCING MATERIALS.
POLYMERS ELEVATING PERFORMANCE.