Scribd
Upload
43 views2 pages

30 Amp Heavy Duty Power Relay

The AZ900 is a 30 amp heavy duty power relay available with AC or DC coils and either 1 Form C contact or 2 Form C contacts. It has a UL Class F temperature rating of 155°C and is intended for switching resistive loads up to 30 amps and 600 volts AC or 28 volts DC. Key specifications include minimum mechanical and electrical life expectancies of 1x107 and 1x105 operations respectively.

Uploaded by

baba ji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views2 pages

30 Amp Heavy Duty Power Relay

The AZ900 is a 30 amp heavy duty power relay available with AC or DC coils and either 1 Form C contact or 2 Form C contacts. It has a UL Class F temperature rating of 155°C and is intended for switching resistive loads up to 30 amps and 600 volts AC or 28 volts DC. Key specifications include minimum mechanical and electrical life expectancies of 1x107 and 1x105 operations respectively.

Uploaded by

baba ji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AZ900

30 AMP HEAVY DUTY


POWER RELAY
FEATURES
• 1 Form C contacts, 2 Form C contacts
• AC and DC coils available
• UL Class F (155°C) molded construction
• UL, CUL file E44211

CONTACTS GENERAL DATA


Arrangement SPDT (1 Form C) DPDT (2 Form C) Life Expectancy Minimum operations
Mechanical 1 x 107
Ratings Resistive load: Electrical 1 x 105 at 30 A 240 VAC Res.
Max. switched power: 840 W or 12000 VA
Max. switched current: 30 A Operate Time (typical) 30 msec at nominal coil voltage
Max. switched voltage: 600 VAC, 28 VDC Release Time (typical) 30 msec at nominal coil voltage
UL, CUR 30 A at 240 VAC (without suppression)
1.5 HP at 120 VAC
2.0 HP at 240 VAC Dielectric Strength 2200 Vrms contact to contact
3600 VA at 120 VAC / 240 VAC ballast (at sea level for 1 min.) 2200 Vrms contact to coil
30 A at 240 VAC Res., 100k cycles
20 A at 600 VAC Insulation Resistance 100 megohms min. at 20°C, 500 VDC
30 A at 28 VDC 50% RH
Material Silver cadmium oxide Dropout DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method) Ambient Temperature
Operating -45°C (-49°F) to 80°C (176°F) AC coil, 30A
-45°C (-49°F) to 115°C (239°F) DC coil, 30A

Weight 227 grams

COIL
Power
At Pickup Voltage DC: 1.12 mW
(typical) AC: 6.9 VA
Max. Continuous DC: 3.3 W at 20°C NOTES
Dissipation AC: 12.5 VA at 20°C
Temperature Rise 70°C at nominal coil voltage (AC) 1. All values at 25°C (77°F).
35°C at nominal coil voltage (DC) 2. Relay may pull in with less than “Must Operate” value.
Max. Temperature 155°C (311°F) 3. Specifications subject to change without notice.

9/12/05
AZ900
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil Must Operate Max. Continuous Nominal Current Coil Resistance ORDER NUMBER*
VDC VDC VDC mA ± 10% ± 10%
6 4.50 7.8 333 18 AZ900–1C–6D
12 9.1 15.4 166 72 AZ900–1C–12D
24 18.0 32.0 83 290 AZ900–1C–24D
48 36.0 62.6 42 1150 AZ900–1C–48D
110 82.5 143.0 18.2 6050 AZ900–1C–110D
COIL SPECIFICATIONS – AC Coil 50/60 Hz
Nominal Coil Must Operate Max. Continuous Nominal Coil Coil Resistance ORDER NUMBER*
VAC VAC VAC Power VA ± 10%
6 5.1 6.9 9.5 0.85 AZ900–1C–6A
12 10.2 13.8 9.5 2.85 AZ900–1C–12A
24 20.4 27.6 9.5 11.5 AZ900–1C–24A
120 102.0 138.0 9.5 295.0 AZ900–1C–120A
240 204.0 276.0 9.5 1170.0 AZ900–1C–240A
480 408.0 552.0 9.5 4860.0 AZ900–1C–480A
*For double pole version replace ‘-1C’ with ‘-2C.’

MECHANICAL DATA

WIRING DIAGRAM
8

1 2

2 Form C

1 2

1 Form C 2 Form C 1 Form C

Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"

9/12/05

You might also like