1/16/2021 board exam: Attempt review (page 4 of 10)
Dashboard / My courses / ME 157-ME / Topic 5 / board exam
Question 31
Incorrect
Mark 0.00 out of 1.00
In the flow process, neglecying KE and PE changes, the integral of -V dP represents which item below?
a. Heat transfer
b. Shaft work
c. Enthalpy change
d. Flow energy
The correct answer is: Shaft work
Question 32
Correct
Mark 1.00 out of 1.00
It is a bituminous coal that contains plenty of hydrocarbons, forming lumped masses when burned. This coal is ideal for forming
carbonaceous gases for reduction of ore. What do you call this coal?
a. Coking or coking coal
b. Peat coal
c. Free burning coal
d. Lignite coal
The correct answer is: Coking or coking coal
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=92078&cmid=23328&page=3 1/4
1/16/2021 board exam: Attempt review (page 4 of 10)
Question 33
Correct
Mark 1.00 out of 1.00
An experiment that tests only one factor at a time by using a comparison of a control group and an experimental group is?
a. a controlled experiment
b. a dependent variable
c. an independent variable
d. a theory
The correct answer is: a controlled experiment
Question 34
Incorrect
Mark 0.00 out of 1.00
It is any boiler or unfired pressure vessel constructed, installed, placed in operation but subject to annual inspection. What do you call this?
a. Existing installation
b. Portable boiler
c. New boiler
d. Miniature boiler
The correct answer is: Existing installation
Question 35
Incorrect
Mark 0.00 out of 1.00
At the beginning of the compression stroke in an standard Otto cycle. The pressure is 100 kPa and the temperature is 15 degree C. the
compression ratio is 8 and work is 1,017.7 kj/kg. Determine the mean effective pressure.
a. 1,406 kPa
b. 1,350 kPa
c. 1,550 kPa
d. 1,500 kPa
The correct answer is: 1,406 kPa
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=92078&cmid=23328&page=3 2/4
1/16/2021 board exam: Attempt review (page 4 of 10)
Question 36
Incorrect
Mark 0.00 out of 1.00
A 3 cm layer asbestos [k=20 W/m degrees C] is used for a pipe [k=20 W/m degrees C] with 15 cm inside diameter and 12 cm outer diameter.
The inside wall temperature of the pipe is maintained at 500 deg C while the outside surface of asbestos at 90 deg C. Calculate the heat loss
per meter length
a. 1400 w/m
b. 1100 w/m
c. 1500 w/m
d. 1265 w/m
The correct answer is: 1265 w/m
Question 37
Correct
Mark 1.00 out of 1.00
The temperature of a solution is 31 degree C. Convert the equivalent Fahrenheit reading to absolute Fahrenheit temperature.
a. 547.8 degree R
b. 520.2 degree R
c. 560.8 degree R
d. 575.5 degree R
The correct answer is: 547.8 degree R
Question 38
Incorrect
Mark 0.00 out of 1.00
There are 150 kg/min of water enters at 5? and leaves at 40?. Find the heat added during the process.
a. 280 kW
b. 556 Kw
c. 244 kW
d. 366 kW
The correct answer is: 366 kW
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=92078&cmid=23328&page=3 3/4
1/16/2021 board exam: Attempt review (page 4 of 10)
Question 39
Incorrect
Mark 0.00 out of 1.00
Among the effluents that may be released from the hydrothermal reservoir which one is the most toxic?
a. Carbon dioxide
b. Ammonia
c. Methane
d. Hydrogen sulfide
The correct answer is: Hydrogen sulfide
Question 40
Incorrect
Mark 0.00 out of 1.00
What always accompanies an isentropic expansion of steam?
a. A decrease in entropy
b. An increase in entropy
c. A decrease in enthalpy
d. An increase in enthalpy
The correct answer is: A decrease in enthalpy
◄ Assignment 8
Jump to...
https://vle.msugensan.edu.ph/mod/quiz/review.php?attempt=92078&cmid=23328&page=3 4/4
