Angle Seat Valve 7010

1/4“ up to 3“; 235 psi up to 580 psi

Pneumatically operated angle seat valve for the control of neutral,

slightly aggressive and highly aggressive media.
• Compact design
• Unaffected by lightly contaminated media
• For temperatures from -148°F up to +428°F
• Working pressure up to 580 psi
• Versatile actuator options

Technical Information
Body material
Messing CC754S Bronze SST CF8M
Nominal size 2 1/2“ and 3“ 1/2“ - 2“ 1/4“ - 3“
Connections:
NPT thread, Tri clamp 2 1/2“ and 3“ 1/2“ - 2“ 1/4“ - 3“
Welding ends (ISO/SAE), 2 1/2“ and 3“ 1/2“ - 2“ 1/4“ - 3“
Tube ends 1/2“ - 3“
Clamp connections
Nominal pressure 235 psi 235 psi 580 psi
Max. fluid temperature*:
with metal bonnet -22°F up to 338°F -22°F up to 338°F -22°F up to 338°F
opt. -22°F up to +428°F opt. 86°F up to +390°F
with plastic bonnet -22°F up to 275°F -22°F up to 275°F -22°F up to 275°F
diaphragm act.,stainless -22°F up to 390°F
steel opt. -22°F up to +428°F
Ambient temperature* -5°F up to +140°F
Vacuum maximum 0.0295 mercury (Hg)
Working pressure for packing
maximum 175 psi
underneath
Working pressure for Tri-
maximum 235 psi
Clamp connection
Packing Leckage ISO FE BH-CC3-SSA1-t(-30°C, +80°C) Test pressure 40 bar
Leakage acc. EN 12266-1 leakage class A
*: Please consider further temperature versions and limits in technical bulletin 32

Options and accessories

- Stroke limitation
- Manual emergency operation
- El. position indicator with inductive or mechanical limit switches
- Solenoid valves
- AS-I contrrol head
- Oil- and greasefree version, PTFE-free version, siliconefree version
- Versions for oxygen or ozon applications
- FDA-compliant version
- Offshore-version
- Mounting bracket for inductive limit switches
- Version for higher pilot pressures
- Version for under water use
- ...

Schubert & Salzer Inc., 4601 Corporate Drive N.W., Suite 100 Concord, NC 28027, Ph.: (704) 789 0169, Fax: (704) 792 9783
[email protected], www.schubertsalzerinc.com
Angle Seat Valve 7010
Build up and function

Spring closes

The function „sping closes“ may

be applied closing against or clo-
sing with the flow. In the configura-
tion closing with the flow the valve Removable position
should only be used for gaseous indicator
fluids. If used for liquids, water
hammers may occur. Bonnet can be rotated
as required (compressed
air connection)
Direct pressure control
(with a pilot valve if
required) actuation by
air, water, mineral oil and
other media

Head Section

Piston rod
stainless steel

Spring opens

Bonnet material chrome

platedbrass, plastic,
stainless steel or Alumi-
nium

Exterior lip seal

Leak detector

PTFE
packing,special ver-
sion free or (packing
underneath)

Seating seal in PTFE

or other materials

body with various connec-

tion types
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring closes“, closing against flow

Actua- Max. differential pressure
Nominal size Version Springs
tor [psi] Pilot
Red Stainless Stainless Stainless pressure
Body material
brass steel steel steel [psi]
Seating seal PTFE PTFE PEEK 7 PEEK 8
1/4'' Standard 2'' 1 - 580 580 580 51 - 145
1 - 580 140 520 51 - 145
3/8'' Standard 2'' 2 - 580 505 580 66 - 145
3 - 580 580 580 83 - 145
1 230 310 - 245 51 - 145
2'' 2 230 500 165 435 66 - 145
1/2'' Standard
3 230 580 375 580 83 - 145
3'' 1 230 580 580 580 51 - 145
1 100 100 - 53 51 - 145
2'' 2 180 180 - 135 66 - 145
3 230 275 42 220 83 - 145
3/4'' Standard
1 230 580 360 550 51 - 145
3'' 2 230 580 555 580 64 - 145
3 230 580 580 580 82 - 145
1 34 34 - - 51 - 145
2'' 2 82 82 - 46 66 - 145
3 130 130 - 95 83 - 145
1 230 315 140 280 51 - 145
1'' Standard 3'' 2 230 435 250 395 64 - 145
3 230 565 390 525 82 - 145
1 230 275 97 235 19 - 145
5'' 2 230 580 405 550 33 - 145
3 230 580 580 580 45 - 145
1 14 14 - - 51 - 145
2'' 2 44 44 - 15 66 - 145
3 73 73 - 44 83 - 145
1 180 180 39 150 51 - 145
3'' 2 230 245 105 215 64 - 145
Standard 3 230 315 180 295 82 - 145
1 150 150 15 125 19 - 145
1 1/4''
2 230 340 200 310 33 - 145
5''
3 230 485 345 455 45 - 145
4 230 565 425 535 58 - 145
10'' 8 - 580 580 580 40 - 87
2'' 2 - 580 - 580 66 - 145
pressure
1 - 580 580 580 51 - 145
balanced 3''
2 - 580 580 580 64 - 145
2 27 27 - - 66 - 145
2''
3 47 47 - 23 83 - 145
1 110 110 - 89 51 - 145
3'' 2 155 155 40 130 64 - 145
Standard
3 200 200 89 180 82 - 145
1 100 100 - 72 19 - 145
2 220 220 105 200 33 - 145
1 1/2'' 5''
3 230 315 200 295 45 - 145
4 - 360 235 340 58 - 145
d16 8 - 460 345 435 40 - 87
10''
12 - 580 525 580 54 - 87
2'' 3 - 580 - 580 83 - 145
pressure
1 - 580 - 580 51 - 145
balanced 3''
2 - 580 580 580 64 - 145
= Standard spring configuration
d16: reinforced design with 16mm (0.63") piston rod
PEEK 7: Seating seal made of PEEK for use below 320°F
PEEK 8: Seating seal made of PEEK for use above 320°F
For soft seals such as EPDM, FKM, NBR or Vulkolan the same values as with PTFE are valid
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring closes“, closing against flow

Pilot
Actua- Max. differential pressure pressure
Nominal size Version Springs pressure
tor
[psi] [psi]
Red Stainless Stainless Stainless
Body material
brass steel steel steel
Seating seal PTFE PTFE PEEK 7 PEEK 8
2 14 14 - - 66 - 145
2''
3 27 27 - - 83 - 145
1 59 59 - 40 51 - 145
3'' 2 87 87 - 66 64 - 145
Standard
3 110 110 17 94 82 - 145
1 55 55 - 36 19 - 145
5'' 2 125 125 34 110 32 - 145
3 180 180 87 155 45 - 145
2''
5'' 4 - 185 98 170 58 - 145
d16 8 - 280 185 260 40 - 87
10''
12 - 395 300 375 54 - 87
2 - 455 - - 66 - 145
2''
3 - 580 - - 83 - 145
pressure
2 - 580 155 580 64 - 145
balanced 3''
3 - 580 580 580 82 - 145
5'' 2 - 580 580 580 33 - 145
3'' 3 60 * 60 - 46 82 - 145
1 24 * 27 - - 19 - 145
Standard
5'' 2 70 * 69 - 56 33 - 145
3 100 * 100 29 87 45 - 145
3 - 100 29 87 45 - 145
5''
4 - 105 36 94 58 - 145
2 1/2'' d16
8 - 155 87 145 40 - 87
10''
12 - 215 145 200 54 - 87
2" 2 - 300 - - 66 - 145
pressure 3'' 2 - 360 - 360 64 - 145
balanced 2 - 360 - 360 33 - 145
5''
3 - 360 360 360 45 - 145
3'' 3 37 * ** ** ** 82 - 145
1 15 * ** ** ** 19 - 145
Standard
5'' 2 43 * ** ** ** 33 - 145
3 71 * ** ** ** 45 - 145
3 - 68 - 56 46 - 145
5''
4 - 72 - 60 58 - 145
3'' d16
8 - 105 49 97 40 - 87
10''
12 - 150 92 140 54 - 87
2 - 360 - 260 67 - 145
3''
pressure 3 - 360 - 360 82 - 145
balanced 2 - 360 - 360 33 - 145
5''
3 - 360 88 360 46 - 145
= Standard spring configuration
* brass body
** only in reinforced design d16
d16: reinforced design with 16mm (0.63") piston rod
PEEK 7: Seating seal made of PEEK for use below 320°F
PEEK 8: Seating seal made of PEEK for use above 320°F
For soft seals such as EPDM, FKM, NBR or Vulkolan the same values as with PTFE are valid
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring opens“, closing against flow

Seating seal PTFE, EPDM, FKM, NBR or Vulkolan

Max. differential pressure [psi] at available pilot pressure [psi]

Nominal Actua-
Version 20 30 40 50 60 70 80 90 100 110 120 130 140
size tor ø
1/4" Standard 2" 0 0 245 580 580 - - - - - - - -
3/8" Standard 2" 0 0 94 380 580 580 - - - - - - -
2" 0 0 47 185 325 465 580 580 - - - - -
1/2" Standard
3" 310 580 - - - - - - - - - - -
2" 0 0 0 54 120 190 260 330 400 470 540 580 580
3/4" Standard
3" 115 300 480 480 580 - - - - - - - -
2" 0 0 0 15 56 97 135 180 220 260 300 345 385
1" Standard
3" 53 160 270 375 485 580 580 - - - - - -
2" 0 0 0 2 28 54 79 105 130 155 180 205 230
1 1/4" Standard 3" 21 89 155 220 290 355 425 560 580 - - - -
5" 205 370 535 - - - - - - - - - -
2" 0 0 0 0 16 33 51 69 87 105 120 140 155
1 1/2" Standard 3" 8 55 100 145 195 240 290 335 380 430 475 525 570
5" 135 250 365 480 580 - - - - - - - -
2" 0 0 0 0 6 18 30 41 52 64 76 87 99
2" Standard 3" 0 27 58 88 115 145 175 205 235 270 300 330 360
5" 80 155 230 300 375 450 525 580 - - - - -
3" 0 12 29 46 63 81 98 115 130 145 165 180 200
Standard
2 1/2" 5" 42 84 125 165 210 250 295 335 360 - - - -
d16 5" 41 83 125 165 205 250 290 330 360 - - - -
3" 0 6 18 30 42 54 66 78 90 100 110 125 135
Standard*
3" 5" 27 57 86 115 145 170 200 230 - - - - -
d16 5" 26 56 85 110 140 170 200 230 260 285 315 345 360
d16: reinforced design with 16mm (0.63") piston rod
Actuator 2": max. pilot pressure 15 psi above the required pilot pressure
Actuator 3": max. pilot pressure 12 psi above the required pilot pressure
Actuator 5" and 10": max. pilot pressure 7 psi above the required pilot pressure
Angle Seat Valve 7010
Pilot and operating pressures
Function „spring opens“, closing against flow
Seating seal PEEK-8 Max. differential pressure [psi] at available pilot pressure [psi]
Nominal size Version Actuator 20 30 40 50 60 70 80 90 100 110 120 130 140
1/4'' Standard 2'' 0 0 115 580 580 - - - - - - - -
3/8'' Standard 2'' 0 0 0 285 575 580 - - - - - - -
2'' 0 0 0 120 260 400 540 580 - - - - -
1/2'' Standard
3'' 245 580 580 - - - - - - - - - -
2'' 0 0 0 7 77 145 215 285 350 420 490 560 580
3/4'' Standard
3'' 71 250 435 580 - - - - - - - - -
2'' 0 0 0 0 20 61 100 140 185 225 265 305 350
1'' Standard
3'' 17 125 230 340 450 555 580 - - - - - -
2'' 0 0 0 0 0 25 51 76 100 125 150 175 205
1 1/4'' Standard 3'' 0 60 125 195 260 325 395 460 530 580 - - -
5'' 175 340 505 580 - - - - - - - - -
3'' 0 31 78 125 170 215 265 310 360 405 450 500 545
1 1/2'' Standard
5'' 110 225 345 460 575 - - - - - - - -
3'' 0 8 39 69 99 125 160 190 220 250 280 310 340
2'' Standard
5'' 61 135 210 285 360 435 505 580 - - - - -
3'' 0 0 15 32 49 66 83 100 115 135 150 165 185
Standard
2 1/2'' 5'' 28 70 110 150 195 235 280 320 360 - - - -
d16 10'' 0 81 165 255 340 - - - - - - - -
3'' 0 0 4 16 27 39 51 62 74 86 97 105 120
3'' d16 5'' 14 44 73 100 130 160 185 215 245 275 305 335 360
10'' 0 52 110 170 230 290 350 - - - - - -

Seating seal PEEK-7 Max. differential pressure [psi] at available pilot pressure [psi]
Nominal size Version Actuator 20 30 40 50 60 70 80 90 100 110 120 130 140
1/4'' Standard 2'' 0 0 245 580 580 - - - - - - - -
3/8'' Standard 2'' 0 0 94 380 580 580 - - - - - - -
2'' 0 0 47 185 325 465 580 580 - - - - -
1/2'' Standard
3'' 310 580 - - - - - - - - - - -
2'' 0 0 0 54 120 190 260 330 400 470 540 580 580
3/4'' Standard
3'' 115 300 480 580 - - - - - - - - -
3'' 53 160 270 375 485 580 580 - - - - - -
1'' Standard
5'' 350 580 - - - - - - - - - - -
3'' 21 89 155 220 290 355 425 490 560 580 - - -
1 1/4'' Standard
5'' 205 370 535 - - - - - - - - - -
3'' 8 55 100 145 195 240 290 335 380 430 475 525 570
1 1/2'' Standard
5'' 135 250 365 480 580 - - - - - - - -
3'' 0 27 58 88 115 145 175 205 235 270 300 330 360
2'' Standard 5'' 80 155 230 300 375 450 525 580 - - - - -
10'' 22 175 325 480 - - - - - - - - -
Standard 5'' 42 84 125 165 210 250 295 335 360 - - - -
2 1/2''
d16 10'' 9 96 180 265 355 - - - - - - - -
5'' 26 56 85 110 140 170 200 230 260 285 315 345 360
3'' d16
10'' 4 64 125 185 245 305 360 - - - - - -
d16: reinforced design with 16mm (0.63") piston rod
PEEK 7: Seating seal made of PEEK for use below 320°F
PEEK 8: Seating seal made of PEEK for use above 320°F
Actuator 2": max. pilot pressure 15 psi above the required pilot pressure
Actuator 3": max. pilot pressure 12 psi above the required pilot pressure
Actuator 5" and 10": max. pilot pressure 7 psi above the required pilot pressure
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring closes“, closing with flow

• Angled seat valve closing with the flow, spring closes
• Use prefearably for gaseous fluids
• With liquids waterhammers are possible

Seating seal PTFE, EPDM, FKM, NBR or Vulkolan

Max. differential pressure [psi] at availlable pilot pressure [psi]
No-
Actua-
minal Version Springs 20 30 40 50 60 70 80 90 100 110 120 130 140
tor
Size
1/4'' Standard 2'' Standard 0 0 580 580 580 580 580 580 580 580 580 580 580
3/8'' Standard 2'' Standard 0 0 580 580 580 580 580 580 580 580 580 580 580

1/2'' Standard 2'' Standard 0 0 195 530 580 580 580 580 580 580 580 580 580

2'' Standard 0 0 92 185 285 380 480 580 580 580 580 580 580
3/4'' Standard
3'' Standard 145 400 580 580 580 580 580 580 580 580 580 580 580
2'' Standard 0 0 58 105 155 205 255 305 355 405 455 475 475
1'' Standard
3'' Standard 80 210 340 470 475 475 475 475 475 475 475 475 475
2'' Standard 0 0 34 62 91 120 145 175 205 230 260 275 275
1 1/4'' Standard 3'' Standard 49 120 200 275 350 425 500 505 505 505 505 505 505
5'' Standard 250 435 505 505 505 505 505 505 505 505 505 505 505
2'' Standard 0 0 34 62 91 120 145 1175 205 230 260 275 275
Standard 3'' Standard 0 43 94 140 195 245 295 330 330 330 330 330 330
1 1/2''
5'' Standard 70 195 320 330 330 330 330 330 330 330 330 330 330
d16 5'' 1 67 190 315 435 560 580 580 580 580 580 580 580 580
2'' Standard 0 0 0 0 32 44 56 69 81 93 105 115 115
Standard 3'' Standard 0 33 65 97 125 160 190 215 215 215 215 215 215
2''
5'' Standard 50 125 205 215 215 215 215 215 215 215 215 215 215
d16 5'' 1 49 125 200 280 355 435 510 550 550 550 550 550 550
3'' Standard 0 18 35 53 71 88 105 120 140 155 170 170 170
Standard
2 1/2'' 5'' Standard 27 71 110 155 170 170 170 170 170 170 170 170 170
d16 5'' 1 26 69 110 155 195 240 280 290 290 290 290 290 290
3'' Standard 0 12 24 36 49 61 73 85 97 110 120 130 130
Standard
5'' Standard 19 49 79 105 130 130 130 130 130 130 130 130 130
3'' 3'' 1 0 0 0 0 29 41 53 65 77 88 100 110 120
d16 5'' 1 18 48 77 105 135 165 185 185 185 185 185 185 185
10'' Standard 0 0 135 185 185 185 185 185 185 185 185 185 185
d16: reinforced design with 16mm (0.63") piston rod
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring closes“, closing with flow

Seating seal PEEK-8
Max. differential pressure [psi] at availlable pilot pressure [psi]
No-
Actua-
minal Version Springs 20 30 40 50 60 70 80 90 100 110 120 130 140
tor
Size
1/4'' Standard 2'' 1 0 0 0 580 580 580 580 580 580 580 580 580 580
3/8'' Standard 2'' 1 0 0 0 580 580 580 580 580 580 580 580 580 580
1/2'' Standard 2'' 2 0 0 0 0 125 460 580 580 580 580 580 580 580
2'' 2 0 0 0 9 105 200 300 395 495 580 580 580 580
3/4'' Standard 3'' 1 0 0 0 190 445 580 580 580 580 580 580 580 580
5'' 1 260 580 580 580 580 580 580 580 580 580 580 580 580
2'' 2 0 0 0 27 77 125 175 225 275 325 375 425 475
1'' Standard 3'' 1 0 0 0 125 255 385 475 475 475 475 475 475 475
5'' 1 260 580 580 580 580 580 580 580 580 580 580 580 580
2'' 2 0 0 0 17 45 74 100 130 160 185 215 245 275
1 1/4'' Standard 3'' 1 0 0 12 88 160 235 310 385 460 505 505 505 505
5'' 1 95 280 465 505 505 505 505 505 505 505 505 505 505
3'' 1 0 0 17 68 115 170 220 270 320 330 330 330 330
Standard
1 1/2'' 5'' 2 0 59 185 310 330 330 330 330 330 330 330 330 330
d16 5'' 2 0 56 180 300 425 550 580 580 580 580 580 580 580
3'' 2 0 0 0 25 57 89 120 150 180 215 215 215 215
Standard
5'' 2 0 50 125 205 215 215 215 215 215 215 215 215 215
2''
5'' 2 0 47 125 200 280 355 435 510 550 550 550 550 550
d16
10'' 6 41 200 360 520 550 550 550 550 550 550 550 550 550
Standard 5'' 2 0 27 70 110 155 170 170 170 170 170 170 170 170
2 1/2'' 5'' 2 0 25 68 110 150 195 240 280 290 290 290 290 290
d16
10'' 6 23 110 200 290 290 290 290 290 290 290 290 290 290
5'' 2 0 17 47 77 105 135 165 185 185 185 185 185 185
3'' d16
10'' 6 15 77 135 185 185 185 185 185 185 185 185 185 185
Angle Seat Valve 7010
Pilot and operating pressures

Function „spring closes“, closing with flow

Seating seal PEEK-7
Max. differential pressure [psi] at availlable pilot pressure [psi]
No-
Actua-
minal Version Springs 20 30 40 50 60 70 80 90 100 110 120 130 140
tor
Size
1/4'' Standard 2'' 1 0 0 0 580 580 580 580 580 580 580 580 580 580
3/8'' Standard 2'' 1 0 0 0 580 580 580 580 580 580 580 580 580 580
1/2'' Standard 2'' 2 0 0 0 0 125 460 580 580 580 580 580 580 580
1 0 0 0 190 445 580 580 580 580 580 580 580 580
3/4'' Standard 3''
1 260 580 580 580 580 580 580 580 580 580 580 580 580
1 0 0 0 125 255 385 475 475 475 475 475 475 475
1'' Standard 3''
1 150 470 475 475 475 475 475 475 475 475 475 475 475
3'' 2 0 0 0 12 88 160 235 310 385 460 505 505 505
1 1/4'' Standard
5'' 1 95 280 465 505 505 505 505 505 505 505 505 505 505
3'' 2 0 0 0 20 70 120 170 220 270 325 330 330 330
Standard
1 1/2'' 5'' 2 0 59 185 310 330 330 330 330 330 330 330 330 330
d16 5'' 2 0 56 180 300 425 550 580 580 580 580 580 580 580
Standard 5'' 2 0 50 125 205 215 215 215 215 215 215 215 215 215
2'' 5'' 2 0 47 125 200 280 355 435 510 550 550 550 550 550
d16
10'' 6 41 200 360 520 550 550 550 550 550 550 550 550 550
Standard 5'' 3 0 0 39 82 125 165 170 170 170 170 170 170 170
2 1/2'' 5'' 3 0 0 37 80 120 165 205 250 290 290 290 290 290
d16
10'' 6 23 110 200 290 290 290 290 290 290 290 290 290 290
5'' 2 0 17 47 77 105 135 165 185 185 185 185 185 185
3'' d16
10'' 6 15 77 135 185 185 185 185 185 185 185 185 185 185
d16: reinforced design with 16mm (0.63") piston rod
PEEK 7: Seating seal made of PEEK for use below 320°F
PEEK 8: Seating seal made of PEEK for use above 320°F
Angle Seat Valve 7010

Ordering Number System

1 2 3 4 5 6 7 8 9 10 11 12
7 0 1 0 / V S 1 - 6 : Please quote all 6 sections.
7 - 12: Quote only if required.
Symbol: "V": Valve
Type Size "A": Actuator (valve without body)
"R": Repair kit (sealings)
1. Body type 2. Connection 3. Body ma- 4. Seating seal 5. Pilot function 6. Actuator
terial
1 angle body 5 NPT-thread 0 brass 0 PTFE 0 NC (closing with flow) 7 piston 2“ (NPT)
bronze 1 Viton 1 NO (closing against flow) 8 piston 3“ (NPT)
1
H welding ends acc. 2 EPDM 2 NC (closing against flow) 9 piston 5“ (NPT)
ISO 2 stainless
3 Bruna 3 Universal, double acting P plastic bonnet
stell 1.4408
J SAE (1/2“) forpiston 2“ (NPT)
7 Peek 5 spring closes, pressure
3 tube ends balanced (closing against S plastic bonnet for
flow) piston 3“ (NPT)
Z Tri clamp inch D diaphragm D
(ASME 1998) 10“ (NPT) For
stainless steel
actuator choose
size 7, 8, 9 For
* metric aircon-
other upon request
nection please
consult factory

7. Springs 8. Head section 9. Packing 10. Temperature 11. Accessories 12. Special versions
material version
- standard - standard - standard - Standard - no accessories S further special
PTFE-Car- (338°F bronze, versions
1 1 spring K reinforced design 1 electrical position indica-
bon filled stainless steel)
tor with one switch M position indicator
2 2 springs
0 PTFE free H high tempera- with cable bus-
2 electrical position indica-
3 3 springs inverted ture version hing
tor with two switches
T 6 springs vacuum
B HT 220 Version N position indicator
temp. 284°F 3 manual emergency ope-
(D250) 430°F, 1/2“ - 1 with plug con-
ration
W 8 springs 2 packing 1/4“(stainless nection
underneath steel only) 4 manual override
(D250)
A PTFE free V viton exterior lip 5 stroke limitation
Y 12 springs
(D250) temp.392°F sealingl 6 pilot valve DN 2, 230 V AC
U low temperature 7 pilot valve DN 2, 24 V DC
version down to
-58°F, fluid K electr. position indicator
compact
W low temperature
version down M position indicator with two
to -58°F fluid ind. switch 10 - 36 V DC
temperature (PNP)
-40°F ambient P position indicator with one
temperature ind. switch 10 - 36 V DC
(PNP)
T position indicator com-
pact, inductive 10 - 30 V
DC (PNP)

Ordering example: 7010/050V150218- - -5

Nominal size 50 mm, angle seat valve, NPT pipe thread, stainless steel body, PTFE seatmate-
rial, N.C., actuator size 80 mm, two springs, stroke limitation.
Angle Seat Valve 7010
standard design

Dimensions and Weights

I I
D D
G

F
F
G

50°
50°
SW2 **

SW1

1.4408 1.4408

E
E
B B
A

C C

Normal closed Normal open

** < = 45° for size 2.5“, brass body for 3“ and stainless steel body for 3“

A B E F G H I SW1 SW2 Cv-values weight

Size actu- G/ bron- C D bron- (stro- bron- bron-
ator ze/ brass ze/ brass ze/ brass stand. rein- ze/ brass (lbs)
NPT ke) for.
SST SST SST SST
1/4“ 2“ 1/4“ 2.35 - 0.45 2.45 5.1 - 4.85 G1/8“ 0.33 1.35 0.8 - 1.2 - 1.1 - 2.2
3/8“ 2“ 3/8“ 2.35 - 0.45 2.45 5.1 - 4.85 G1/8“ 0.35 1.35 0.9 - 1.2 - 1.9 - 2.31
1/2“ 2“ 1/2“ 2.55 - 0.6 2.45 5.3 - 4.7 G1/8“ 0.28 1.35 1 - 1.2 - 4.1 - 2.42
3/4“ 2“ 3/4“ 2.95 - 0.65 2.45 5.3 - 4.9 G1/8“ 0.47 1.35 1.2 - 1.2 - 9.3 - 2.64
1“ 2“ 1“ 3.55 - 0.75 2.45 5.7 - 5.1 G1/8“ 0.63 1.35 1.55 - 1.2 - 17.4 - 3.08
1“ 3“ 1“ 3.55 - 0.75 3.8 7.3 - 6.7 G1/4“ 0.63 2.15 1.55 - 1.2 - 18.6 - 6.6
1 1
2“ 4.35 - 0.85 2.45 6.3 - 5.7 G1/8“ 0.63 1.35 1.9 - 1.2 - 24.4 - 3.96
1/4“ 1/4“
1 1
3“ 4.35 - 0.85 3.8 7.85 - 7.5 G1/4“ 0.79 2.15 1.9 - 1.2 - 27.8 - 7.26
1/4“ 1/4“
1 1
5“ 4.35 - 0.85 5.75 9.05 - 8.45 G1/4“ 0.79 3.15 1.9 - 1.2 - 27.8 - 12.1
1/4“ 1/4“
1 1
2“ 4.7 - 0.85 2.45 6.5 - 5.9 G1/8“ 0.63 1.35 2.15 - 1.2 - 34.8 - 4.62
1/2“ 1/2“
1 1
3“ 4.7 - 0.85 3.8 8.05 - 7.7 G1/4“ 0.91 2.15 2.15 - 1.2 - 40.6 - 7.92
1/2“ 1/2“
1 1
5“ 4.7 - 0.85 5.75 9.25 - 8.65 G1/4“ 0.91 3.15 2.15 - 1.2 - 40.6 - 12.76
1/2“ 1/2“
2“ 2“ 2“ 5.9 - 1 2.45 7.3 - 6.3 G1/8“ 0.63 1.35 2.7 - 1.25 - 46.4 - 5.94
2“ 3“ 2“ 5.9 - 1 3.8 8.85 - 7.85 G1/4“ 1.14 2.15 2.7 - 1.25 1.4 63.8 - 9.24
2“ 5“ 2“ 5.9 - 1 5.75 9.85 - 8.85 G1/4“ 1.14 3.15 2.7 - 1.25 1.4 63.8 - 14.08
2 2
3“ 7.1 7.1 1.2 3.8 10.25 10.25 8.65 G1/4“ 1.14 2.15 3.35 3.35 1.4 1.6 92.8 107.9 13.64
1/2“ 1/2“
2 2
5“ 7.1 7.1 1.2 5.75 11.2 11.2 9.85 G1/4“ 1.14 3.15 3.35 3.35 1.4 1.6 92.8 107.9 18.48
1/2“ 1/2“
3“ 3“ 3“ - 8.25 1.3 3.8 - 11 8.85 G1/4“ 1.14 2.15 - 3.95 1.6 1.6 - 133.4 18.26
3“ 5“ 3“ - 8.25 1.3 5.75 - 12 9.85 G1/4“ 1.14 3.15 - 3.95 1.6 1.6 - 133.4 23.1
*Dimensions in inch
Angle Seat Valve 7010
reinforced design

Dimensions and Weights

G F

45°

SW1 SW2
E
B
A

diaphragm actuator-
spring to close

Actua- A Stroke cv- Weight

Size B C D E F G SW1 SW2 α
tor Rp/NPT (inch) value (lbs)
2“ 10“ 2“ 5.91 1.01 9.37 13.31 12.72 G1/4“ 0.98 2.68 1.26 50° 63.8 32
2 1/2“ 10“ 2 1/2“ 7.09 1.19 9.37 14.41 13.62 G1/4“ 0.98 3.35 1.61 45° 92.8 34.5
3“ 10“ 3“ 8.27 1.31 9.37 16.02 13.78 G1/4“ 0.98 3.94 1.61 45° - 39
Dimensions in inch
Angle Seat Valve 7010
pressure balanced version

Build up, dimensions and weight

I
Piston rod stain- Headsection
less steel 1.4571,
roller burnished

F
Balanced plug

G
stainless steel
1.4571
50°

SW2
body

seating seal PTFE

and other mate- 1.4408 SW1
rials

E
B E1
A

Cvs-
A B E H SW1 SW 2 weight
value
actua-
Size stain- C D stain- F G I stain- stain-
tor (stro-
G/NPT less less less Stand. less (kg)
ke)
steel steel steel steel
1 1/4“ 2“ 1 1/4“ 4.33 0.84 2.44 6.89 6.5 G1/8" 0.63 1.36 1.89 1.61 24.4 4.4
1 1/2“ 2“ 1 1/2" 4.72 0.84 2.44 7.28 6.89 G1/8" 0.63 1.36 2.17 1.81 34.8 5.1
1 1/2“ 3“ 1 1/2" 4.72 0.84 3.78 8.66 8.27 G1/4" 0.83 2.17 2.17 1.81 40.6 9
2“ 2“ 2" 5.91 1.01 2.44 7.87 7.09 G1/8" 0.63 1.36 2.68 2.05 46.4 7.3
2“ 3“ 2" 5.91 1.01 3.78 9.45 8.66 G1/4" 0.87 2.17 2.68 2.05 63.8 11
2“ 5“ 2" 5.91 1.01 5.75 10.43 9.65 G1/4" 0.87 3.15 2.68 2.05 63.8 12.3
2 1/2“ 2“ 2 1/2" 7.09 1.19 3.78 8.86 7.87 G1/8" 0.63 2.17 3.35 1.42 92.8 11.2
2 1/2“ 3“ 2 1/2" 7.09 1.19 3.78 10.43 9.45 G1/4" 1.14 2.17 3.35 1.42 92.8 15
2 1/2“ 5“ 2 1/2" 7.09 1.19 5.75 11.42 10.43 G1/4" 1.14 3.15 3.35 1.42 92.8 17.2
3“ 3“ 3" 8.43 1.31 3.78 12.8 10.63 G1/4" 1.18 2.17 3.94 1.81 129.9 22.9
3“ 5“ 3" 8.43 1.31 5.75 13.98 11.81 G1/4" 1.18 3.15 3.94 1.81 129.9 26
Dimensions in inch
Angle Seat Valve 7010
Version HT220

Dimensions and weight

I I
D D
G
H

F
F
G

50° ** 50° **

SW2 SW2

SW1 SW1

1.4408 1.4408

E E
B B
A
A

C C

Normally closed Normally open

Actuator A Weight
Cv- (ap-
Size diame- B C D E F G H I SW1 SW2
G/NPT values prox.
ter lbs)
3/8“ 2“ 3/8“ 2.35 0.45 2.45 5.6 5.5 G1/8 0.25 1.35 0.9 1.2 1.9 2.4
1/2“ 2“ 1/2“ 2.55 0.6 2.45 5.7 5.45 G1/8 0.3 1.35 1 1.2 4.1 2.6
2“ 3/4“ 2.95 0.65 2.45 6 5.65 G1/8 0.45 1.35 1.2 1.2 9.3 2.9
3/4“
3“ 3/4“ 2.95 0.65 3.8 7.3 7.15 G1/4 0.45 2.15 1.2 1.2 9.3 4.2
3“ 1“ 3.55 0.75 3.8 7.6 7.3 G1/4 0.65 2.15 1.55 1.2 18.6 6.8
1“
5“ 1“ 3.55 0.75 5.75 8.8 8.45 G1/4 0.65 3.15 1.55 1.2 18.6 11.7
3“ 1 1/4“ 4.35 0.85 3.8 8.3 7.9 G1/4 0.8 2.15 1.9 1.2 27.8 7.5
1 1/4“
5“ 1 1/4“ 4.35 0.85 5.75 9.5 9.1 G1/4 0.8 3.15 1.9 1.2 27.8 12.3
3“ 1 1/2“ 4.7 0.85 3.8 8.5 8.1 G1/4 0.85 2.15 2.15 1.2 40.6 8.1
1 1/2“
5“ 1 1/2“ 4.7 0.85 5.75 9.65 9.25 G1/4 0.85 3.15 2.15 1.2 40.6 13
2“ 5“ 2“ 5.9 1 5.75 10.25 9.5 G1/4 1 3.15 2.7 1.25 63.8 14.3
Dimensions in inch
Angle Seat Valve 7010
Temperature versions

Material selection matrix

Version Description Fluid temperature Ambient temperature

1 Standard - Bronze -22°F up to +338°F +5°F up to +140°F
2 Standard - Stainless steel -22°F up to +338°F +5°F up to +140°F
3 HT220 - version, only with PEEK seating seal +320°F up to +428°F +5°F up to +212°F
4 High temperature version in stainless steel
-22°F up to +392°F
5 High temperature version for bronze or brass body +5°F up to +212°F
6 Exterior lip seal made of Viton for bronze or brass body -22°F up to +338°F
7 Low temperature version acc. to drawing R0194 for stainless steel body +5°F up to +140°F
8 Low temperature version acc. to drawing R0188 for stainless steel body -58°F up to +275°F
-40°F up to +140°F
9 Low temperature version acc. to drawing R0188 for bronze or brass body
10 Low temperature version for stainless steel body
-40°F up to + 338°F +5°F up to +140°F
11 Low temperature version for bronze or brass body
12 Bonnet for actuator made of polymer for stainless steel body
-22°F up to +275°F +5°F up to +140°F
13 Bonnet for actuator made of polymer for bronze or brass body
Low temperature version with bonnet for actuator made of polymer and stainless
14
steel body
-40°F up to +275°F +5°F up to +140°F
Low temperature version with bonnet for actuator made of polymer for bronze or
15
brass body
16 Long head section (without bellows) -94°F up to +392°F +5°F up to +140°F
17 Long head section with bellows -148°F up to +392°F +5°F up to +140°F
18 Standard, bronze with seals from NBR
-22°F up to +338°F -22°F up to +140°F
19 Standard, stainless steel with seals from NBR
20 Low temperature version, seating seal made of NBR and bronze or brass body
-40°F up to +338°F -40°F up to +140°F
21 Low temperature version, seating seal made of NBR and stainless steel body
22 Diaphragm actuator D250 -22°F up to +392°F -22°F up to +140°F
23 Low temperature version for diaphragm actuator D250 -40°F up to +392°F -22°F up to +140°F
Angle Seat Valve 7010
Body designs

Body made of stainless steel 1.4408 with female thread G/NPT

SW
G
L2
L1

Withworth pipe thread „G“ acc. ISO 228-1 NPT-thread acc ANSI B 1.20.1
Code: „0“ Code: „5“
DN L1 L2 G SW L1 L2 G SW
1/4“ (8) 2.36 0.47 G 1/4“ 0.79 2.36 0.42 NPT 1/4“ 0.79
3/8“ (10) 2.36 0.47 G 3/8“ 0.91 2.36 0.43 NPT 3/8“ 0.91
1/2“ (15) 2.56 0.59 G 1/2“ 0.98 2.56 0.57 NPT 1/2“ 0.98
3/4“ (20) 2.95 0.64 G 3/4“ 1.22 2.95 0.59 NPT 3/4“ 1.22
1“ (25) 3.54 0.75 G 1“ 1.54 3.54 0.71 NPT 1“ 1.54
1 1/4“ (32) 4.33 0.84 G 1 1/4“ 1.89 4.33 0.73 NPT 1 1/4“ 1.89
1 1/2“ (40) 4.72 0.84 G 1 1/2“ 2.17 4.72 0.73 NPT 1 1/2“ 2.17
2“ (50) 5.91 1.01 G 2“ 2.68 5.91 0.75 NPT 2“ 2.68
2 1/2“ (65) 7.09 1.19 G 2 1/2“ 3.35 7.09 1 NPT 2 1/2“ 3.35
3“ (80) 8.43 1.32 G 3“ 3.94 8.43 1.08 NPT 3“ 3.94
Dimensions in inch

Body made of stainless steel 1.4408 mit conical pipe thread Rc

Concical pipe thread „Rc“ acc. EN 10226-2
Code: „T“
DN L1 L2 G SW
1/4“ (8) - - - -
3/8“ (10) 2.36 0.45 Rc 3/8“ 0.91
1/2“ (15) 2.56 0.59 Rc 1/2“ 0.98
SW
G

3/4“ (20) 2.95 0.64 Rc 3/4“ 1.22

1“ (25) 3.54 0.75 Rc 1“ 1.54
1 1/4“ (32) 4.33 0.84 Rc 1 1/4“ 1.89
L2
1 1/2“ (40) 4.72 0.84 Rc 1 1/2“ 2.17
L1
2“ (50) 5.91 1.01 Rc 2“ 2.68
Dimensions in inch

Body made of stainless steel 1.4408 without thread

Code: „6“
DN L1 L2 D1 SW
1/4“ (8) 2.4 0.65 0.39 0.79
3/8“ (10) 2.4 0.65 0.51 0.91
1/2“ (15) 2.6 0.65 0.67 0.98
3/4“ (20) 2.99 0.73 0.87 1.22
ØD1

SW

1“ (25) 3.58 0.87 1.08 1.54

1 1/4“ (32) 4.37 0.94 1.44 1.89
1 1/2“ (40) 4.76 0.94 1.67 2.17
L2 2“ (50) 5.94 1.14 2.13 2.68
L1 2 1/2“ (65) 7.17 1.57 2.6 3.35
3“ (80) 8.43 1.52 3.15 3.94
Dimensions in inch
Angle Seat Valve 7010
Body designs

Body made of stainless steel 1.4408 with welding ends DIN/ISO

s
ØD2
ØD1
L2
L1

Welding ends acc DIN 11850 series 2 Welding ends acc ISO 1127 - B
Code: "D" Code: "H"
DN L1 L2 D2 s L1 L2 D2 s
1/4" (8) - - - - - - - -
3/8" (10) - - - - - - - -
1/2" (15) 3.15 0.79 0.75 0.06 3.15 0.79 0.84 0.08
3/4" (20) 3.54 0.87 0.91 0.06 3.54 0.87 1.06 0.09
1" (25) 3.94 0.83 1.14 0.06 3.94 0.83 1.33 0.1
1 1/4" (32) 4.33 0.79 1.38 0.06 4.33 0.79 1.67 0.1
1 1/2" (40) 4.72 0.87 1.61 0.06 4.72 0.87 1.9 0.1
2" (50) 5.91 1.1 2.09 0.06 5.91 1.1 2.37 0.11
2 1/2" (65) 7.09 1.1 2.76 0.08 7.09 1.1 3 0.11
3" (80) - - - - 8.66 0.69 3.5 0.13
Dimensions in inch

Body made of stainless steel 1.4408 with socked-welds

ØD2
ØD1

SW

L2
L1

socked-welds acc. R 0103 socked-welds acc. R 0094

Code: "2" Code: "E"
DN L1 L2 D1 D2 SW L1 L2 D1 D2 SW
1/4" (8) - - - - - - - - - -
3/8" (10) - - - - - - - - - -
1/2" (15) 2.6 0.5 0.67 0.85 0.98 2.6 0.2 0.67 0.81 0.98
3/4" (20) 2.99 0.56 0.87 1.07 1.22 2.99 0.2 0.87 1 1.22
1" (25) 3.58 0.63 1.08 1.33 1.54 3.58 0.2 1.08 1.2 1.54
1 1/4" (32) 4.37 0.69 1.44 1.68 1.89 4.37 0.2 1.44 1.52 1.89
1 1/2" (40) 4.76 0.75 1.67 1.91 2.17 4.76 0.2 1.67 1.77 2.17
2" (50) 5.94 0.87 2.13 2.41 2.68 5.94 0.2 2.13 2.26 2.68
2 1/2" (65) 7.17 0.98 2.6 2.91 3.35 7.17 0.2 2.6 3.02 3.35
3" (80) 8.43 1 3.15 3.53 3.94 8.43 0.2 3.15 3.5 3.94
Dimensions in inch
Angle Seat Valve 7010
Body designs

Body made of stainless steel 1.4408 with welding ends ASME BPE

Welding ends acc. R0129

Code: "3"
DN L1 L2 L3 D1 s
1/4" (8) 3.9 0.75 0.75 0.25 0.06
3/8" (10) - - - - -
s

1/2" (15) 4.6 1 1 0.5 0.05

3/4" (20) 5.24 1.13 1.13 0.75 0.06
D1

1" (25) 6.58 1.5 1.5 1 0.06

1 1/4" (32) - - - - -
1 1/2" (40) 7.76 1 2 1.5 0.06
L2 L3
2" (50) 8.5 1.28 1.28 2 0.06
L1 2 1/2" (65) - - - - -
Dimensions in inch

Body made of stainless steel 1.4408 with Clamp-connections

s
ØD2
ØD1

ØD3

L1

Clamp-connection acc. DIN Clamp-connection acc. ISO

Code: "N" Code: "K"
DN L1 D1 D2 s D3 L1 D1 D2 s D3
1/4" (8) - - - - - - - - - -
3/8" (10) - - - - - - - - - -
1/2" (15) 4.57 0.63 0.75 0.06 1.34 4.57 0.71 0.84 0.06 1.34
3/4" (20) 4.96 0.79 0.91 0.06 1.34 5.24 0.93 1.06 0.06 1.99
1" (25) 5.63 1.02 1.14 0.06 1.99 5.63 1.17 1.33 0.08 1.99
1 1/4" (32) 6.02 1.26 1.38 0.06 1.99 6.02 1.51 1.67 0.08 1.99
1 1/2" (40) 6.42 1.5 1.61 0.06 1.99 6.42 1.74 1.9 0.08 2.52
2" (50) 7.6 1.97 2.09 0.06 2.52 8.11 2.22 2.37 0.08 3.05
2 1/2" (65) 9.29 2.6 2.76 0.08 3.58 9.29 2.84 3 0.08 3.58
3" (80) - - - - - 10.87 3.32 3.5 4.17 0.10
Dimensions in inch

Clamp-connection acc. Inch Clamp-connection acc. Inch (long)

Code: "Z" Code: "Z"
DN L1 D1 D3 L1 D1 D3
1/4" (8) - - - - - -
3/8" (10) - - - - - -
1/2" (15) 4.72 0.37 0.98 - - -
3/4" (20) 5.12 0.62 0.98 - - -
1" (25) 5.63 0.86 1.99 7.5 0.9 1.99
1 1/4" (32) 6.57 1.12 1.99 - - -
1 1/2" (40) 6.42 1.38 1.99 - - -
2" (50) 7.6 1.88 2.52 10.5 1.88 2.52
2 1/2" (65) 9.17 2.38 3.05 - - -
Dimensions in inch
Angle Seat Valve 7010
Body designs

Body made of stainless steel 1.4408 with welding ends MF

Code: "M"
DN L1 L2 D2 s
1/4" (8) - - - -
L2
s

3/8" (10) - - - -
1/2" (15) - - - -
3/4" (20) 2.95 0.41 1.1 0.06
ØD2
ØD1

1" (25) - - - -
1 1/4" (32) - - - -
1 1/2" (40) - - - -
0,41 2" (50) - - - -
L1 2 1/2" (65) - - - -
Dimensions in inch

Body made of stainless steel 1.4408 with male thread

Other special versions Code: „2“

DN M L l
1/4“ (8) - - -
1.44 3/8‘‘ (10) M25x1,5 2.99 0.55
08 1/2‘‘ (15) - - -
3/4‘‘ (20) M36x2 3.94 0.47
1‘‘ (25) - - -
M

1 1/4‘‘ (32) - - -
1 1/2‘‘ (40) - - -
2‘‘ (50) - - -
l 2 1/2‘‘ (65) - - -
L 3‘‘ (80) - - -
Dimensions in inch

Text and pictures are not binding. We reserve the right, to alter the equipment.
7010 - data sheet/Version: 07.06.2021