SR520

THRU
SR5200
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 5.0 Ampere

FEATURES
* High reliability
* Low switching loss
* Low forward voltage drop
* High current capability
* High switching capability
DO-201AD
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Case: Molded plastic
* Lead: MIL-STD-202E method 208C guaranteed
.052 (1.3)
* Mounting: position: Any .048 (1.2)
DIA.
1.0 (25.4)
* Weight: 1.18 grams MIN.

.375 (9.5)
.335 (8.5)
.220 (5.6)
DIA.
.197 (5.0)

1.0 (25.4)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN.

Ratings at 25 o C ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)

RATINGS SYMBOL SR520 SR530 SR540 SR550 SR560 SR580 SR5100 SR5150 SR5200 UNITS
Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 150 200 Volts
Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 105 140 Volts
Maximum DC Blocking Voltage VDC 20 30 40 50 60 80 100 150 200 Volts
Maximum Average Forward Rectified Current
IO 5.0 Amps
at Derating Lead Temperature
Peak Forward Surge Current 8.3 ms single half sine-wave
I FSM 150 Amps
superimposed on rated load (JEDEC method)
RqJA 25
Typical Thermal Resistance (Note 1) 0
C/W
RqJL 8
Typical Junction Capacitance (Note 3) CJ 200 pF
Operating Temperature Range TJ 150 0
C
0
Storage Temperature Range T STG -55 to + 150 C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted)
CHARACTERISTICS SYMBOL SR520 SR530 SR540 SR550 SR560 SR580 SR5100 SR5150 SR5200 UNITS
Maximum Instantaneous Forward Voltage at 5.0A DC VF .55 .75 .85 Volts
Maximum Average Reverse Current @T A = 25 o C 0.2 mA
IR
at Rated DC Blocking Voltage @T A = 100 o C 2 mA
NOTES : 1. Thermal Resistance : At 9.5mm lead lengths, PCB mounted. 2006-11
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".

Downloaded from: http://www.datasheetcatalog.com/

 RATING AND CHARACTERISTICS CURVES ( SR520 THRU SR5200 )

INSTANTANEOUS FORWARD CURRENT, (mA)

6 10
AVERAGE FORWARD CURRENT, (A)

5
TA = 125 OC

SR
SR
55 1.0

580
4 0~
SR

~S
SR
52

R5
56
0~

200
0
SR

0.1 T = 75 OC
54

A
0

2
Single Phase Half Wave 0.01
60Hz Inductive or TA = 25 OC
1 SR520 ~SR540
Resistive Load
SR550~SR560
0.375" (9.5mm) Lead Length
SR580~SR5200
0 0.001
0 50 100 150 0 20 40 60 80 100 120 140
O
LEAD TEMPERATURE, ( C) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
FIG.1 TYPICAL FORWARD CURRENT FIG.2 TYPICAL REVERSE
DERATING CURVE CHARACTERISTICS
50 0.4
CJ, JUNCTION CAPACITANCE, (nF)
INSTANTANEOUS REVERSE CURRENT, (A)

SR520 ~SR540 TJ = 25 OC

0.2
10 SR550~SR560

0.1
0.08
SR580 ~SR5200
0.06
1.0 0.04

TJ = 25 OC 0.02
Pulse width=300mS
1% Duty Cycle
0.1 0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 0.4 1.0 4 10 40 80100
INSTANTANEOUS FORWARD VOLTAGE, (V) REVERSE VOLTAGE, (V)

FIG.3 TYPICAL INSTANTANEOUS FORWARD FIG.4 TYPICAL JUNCTION CAPACITANCE

CHARACTERISTICS

150
PEAK FORWARD SURGE CURRENT, (A)

8.3mS Single Half Sine-Wave

JEDEC Method
125

100

75

50

25

0
1 2 5 10 20 50 100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT

Downloaded from: http://www.datasheetcatalog.com/

 DISCLAIMER NOTICE

Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.

Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
 This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.

Downloaded from: http://www.datasheetcatalog.com/